উপশ্রেণী

পণ্য (44,000+)

TUSB2036VFG4 - 12Mbps 3-Port USB Hub | Texas Instruments
TUSB2036VFG4

TUSB2036VFG4 - 12Mbps 3-Port USB Hub | Texas Instruments

Texas Instruments TUSB2036VFG4 is a 3.3 V CMOS USB 2.0 full-speed hub controller with a 12 Mbps data rate, two or three downstream ports, and an optional serial EEPROM interface. The device is packaged in a 32-pin LQFP measuring 7 mm by 7 mm. It is designed for systems that need to expand one USB host connection into multiple full-speed peripheral ports without requiring firmware or an external microcontroller. A USB hub controller is a dedicated interface semiconductor that manages traffic between an upstream USB host and one or more downstream devices. It belongs to the USB interface IC hierarchy and broader interface semiconductor category. A full-speed USB 2.0 hub operates at 12 Mbps, making it appropriate for keyboards, mice, printers, human-interface devices, data acquisition equipment, and other peripherals that do not require high-speed or SuperSpeed USB signaling. The TUSB2036VFG4 supports up to three downstream ports and can use a serial EEPROM for configuration storage when the application requires field-programmable hub behavior. Its digital state-machine implementation requires no firmware programming. A 3.3 V operating supply and full-speed USB operation simplify integration into equipment containing legacy USB peripherals, while the 32-LQFP package provides a conventional surface-mount footprint for industrial control, instrumentation, and embedded systems. The TUSB2036 family uses a digital state machine rather than a microcontroller core to control hub functions. This architecture can reduce software complexity because port behavior is handled by dedicated hardware. The manufacturer describes the TUSB2036 as compliant with the USB 2.0 specification for 2/3-port, 12 Mbps full-speed operation. Exact port-disable, power-control, bus-power, and configuration behavior should be confirmed against the pin description and application information in the manufacturer datasheet before board release. Typical uses include industrial test equipment, laboratory instruments, printers, point-of-sale terminals, embedded computers, and USB expansion cards. The hub can consolidate several low-speed or full-speed peripherals behind one upstream host connection. In self-powered equipment, designers must implement the required power-distribution architecture and ensure downstream devices receive adequate bus power. Systems with many high-current peripherals may require external power rather than relying entirely on the upstream USB supply. PCB implementation should preserve short, impedance-controlled USB signal paths and provide solid ground-plane continuity between the controller and connected ports. Place USB differential lines as a matched pair, minimize stub lengths, and keep switching regulators and inductors away from the 12 Mbps data traces. Decoupling and protection components should follow the connection and routing guidance in the manufacturer datasheet. This page combines manufacturer specifications, package and interface details, ordering guidance, comparison data, and practical integration notes. These engineering-focused details help designers determine whether the TUSB2036VFG4 fits a USB full-speed expansion requirement before beginning PCB layout or prototype assembly.

RFQ যোগাযোগ
TUSB2040AN - 4-Port USB 1.0 Hub Controller | Texas Instruments
TUSB2040AN

TUSB2040AN - 4-Port USB 1.0 Hub Controller | Texas Instruments

The Texas Instruments TUSB2040AN is a 3.3 V CMOS four-port Universal Serial Bus hub controller with an optional serial EEPROM interface, supplied in a 28-pin PDIP package. It provides up to four downstream USB ports and supports USB specification version 1.0. The TUSB2040AN belongs to the USB interface controller hierarchy, combining host-interface, port-management, and downstream-port switching functions in one integrated circuit. A USB hub controller is a semiconductor that manages a shared USB connection and distributes it among multiple downstream peripherals. It sits between a USB host and attached devices, supporting device attachment, enumeration, and port routing. The TUSB2040A device family was designed for USB 1.0 systems in which up to four downstream ports are required and an optional serial EEPROM can provide configuration or hub-specific information. The principal verified characteristics of the TUSB2040AN are its four downstream ports, 3.3 V CMOS operation, USB 1.0 support, optional serial EEPROM interface, and 28-pin PDIP package. Its parallel host-side data and control paths are intended for conventional low-speed and full-speed Universal Serial Bus designs. The integrated hub function reduces the number of separate discrete interface components required around a host port. The TUSB2040A architecture includes separate downstream differential data connections for the four hub ports and an upstream connection to the USB host. Configuration information can optionally be supplied through a serial EEPROM, allowing a board designer to support application-specific hub behavior without relying entirely on fixed internal configuration. Exact electrical limits, timing values, and operating-temperature data must be taken from the manufacturer datasheet. Typical uses include legacy USB keyboards, mice, printers, industrial data-acquisition equipment, educational laboratory computers, and embedded host systems that need to expand one host connection into four downstream ports. A prototype can also be used to verify USB enumeration, peripheral attachment, and power-management behavior before the PCB layout is released. PCB design should preserve short USB differential traces, continuous ground references, controlled impedance, and proper separation from noisy switching nodes. The optional serial EEPROM interface requires stable address, clock, and data routing, while unused inputs and outputs must follow the manufacturer’s termination and connection guidance. Because the verified search results do not provide a complete pin table or detailed application circuit, those items should be confirmed against the manufacturer documentation before layout. This product record combines the verified distributor and datasheet-search information with structured engineering guidance. It also explicitly identifies unavailable pricing, lifecycle, pinout, and substitution data instead of presenting unverified substitutions as drop-in alternatives.

RFQ যোগাযোগ
TUSB2040APT - 4-Port USB 1.0 Hub Controller | Texas Instruments
TUSB2040APT

TUSB2040APT - 4-Port USB 1.0 Hub Controller | Texas Instruments

Texas Instruments TUSB2040APT is a 3.3 V CMOS four-port Universal Serial Bus hub controller with an optional serial EEPROM interface, supplied in a 48-pin PQFP package. The device provides four downstream USB ports and supports USB 1.0 low-speed and full-speed operation according to the Texas Instruments manufacturer datasheet. A USB hub controller is an interface integrated circuit that expands one upstream USB connection into multiple downstream ports. In the USB interface hierarchy, the TUSB2040APT sits between a host controller and connected peripherals, adding port management, shared-bus coordination, and optional configuration-memory support. It is designed for legacy USB 1.0 equipment rather than current USB 2.0, USB 3.x, or Type-C ecosystems. The principal feature is four downstream ports in one controller. This allows several USB peripherals to share an available host USB port while the hub manages downstream traffic. The optional serial EEPROM interface provides a path for hub descriptors and configuration data, which can be important when the host must identify the hub correctly. The controller operates from a 3.3 V CMOS supply. The 48-pin PQFP package exposes separate USB data and clock connections for the upstream interface and downstream ports, together with power, configuration, enable, and interrupt-related functions. Because this is a legacy USB 1.0 hub implementation, system design should verify signal routing, termination, bus capacitance, enumeration behavior, and downstream-current requirements against the manufacturer datasheet rather than assuming compatibility with newer USB standards. Typical uses include industrial data-acquisition equipment, legacy test systems, embedded service interfaces, printer or peripheral interfaces, and older computer peripherals that require a multiport USB hub. The device is most appropriate when the existing system already uses USB 1.0 and its electrical and enumeration behavior has been validated. Designers should preserve the recommended placement and connection of USB differential pairs, minimize stubs between the controller and connectors, and route high-current supply paths independently from sensitive data signals. Confirm the pin assignment and power requirements in the Texas Instruments manufacturer datasheet before finalizing the PCB because the available product summary does not reproduce the complete pin table. This page organizes the manufacturer device description, package information, sourcing fields, interface applications, and engineering considerations into one focused reference. It also distinguishes what the part actually supports—four-port USB 1.0 hub control with optional EEPROM—from newer hub controllers that require different electrical and firmware support.

RFQ যোগাযোগ
TUSB2040N - 4-Port USB 1.0 Hub Controller | Texas Instruments
TUSB2040N

TUSB2040N - 4-Port USB 1.0 Hub Controller | Texas Instruments

Texas Instruments TUSB2040N is a four-port USB 1.0-compatible hub controller with integrated USB transceivers, per-port power switching, and overcurrent reporting. The device supports four downstream ports and two power-source arrangements: self-powered mode and bus-powered mode. It is packaged as a 28-pin PDIP according to the retrieved distributor records. The verified source identifies the TUSB2040 family as a universal serial bus hub controller and does not provide additional electrical timing, current, or temperature values. A USB hub controller is an interface IC that connects one upstream USB port to multiple downstream ports, allowing peripherals to share a host controller. Within the hierarchy of USB interface devices, transceiver, hub controller, interface IC, and semiconductor, the TUSB2040N provides the logic and physical connectivity for expanding USB 1.0 equipment. Its integrated transceivers reduce the need for separate USB transceiver circuitry on the hub board. The principal verified features are four downstream ports, integrated USB transceivers, USB 1.0 compliance, self-powered operation, bus-powered operation, per-port power switching, overcurrent reporting, per-port or ganged power modes, and suspend support. These functions suit hubs where the host must enumerate multiple peripherals and where each downstream port needs controllable power. The retrieved distributor listing describes the part as an interface controller, while the family datasheet result specifically identifies four-port USB hub functionality. The TUSB2040N is intended for USB 1.0 hub designs, including peripheral expansion, legacy computer interfaces, industrial equipment, and embedded systems that use multiple low-speed, full-speed, or compatible USB devices. Its architecture places port power management close to the USB interface, allowing the design to report overcurrent conditions and manage downstream power distribution. Exact propagation delays, operating voltage, maximum downstream current, and USB data-rate details are not present in the verified web data and must be confirmed from the manufacturer datasheet before a new design is released. For implementation, follow the TUSB2040 family datasheet for pin assignments, transceiver connections, power-source selection, capacitor values, and port-power topology. Pay particular attention to upstream and downstream USB differential routing, ground-plane continuity, and current-limit behavior. Because the verified record lists a PDIP package, verify physical dimensions and pin orientation against the actual manufacturer drawing rather than relying only on distributor metadata. This page combines the verified distributor and datasheet-search records with clearly marked missing-data fields. It does not infer prices, lifecycle claims, pin names, or electrical limits that were not supplied. Buyers should request a quotation for current commercial availability and confirm the exact package, ordering suffix, and production status with Texas Instruments before committing a design to production.

RFQ যোগাযোগ
TUSB2043VF - 4-Port USB Hub with EEPROM | Texas Instruments
TUSB2043VF

TUSB2043VF - 4-Port USB Hub with EEPROM | Texas Instruments

Texas Instruments TUSB2043VF is a four-port USB hub controller with an optional serial EEPROM interface, a 48 MHz oscillator or clock source, and a 32-pin LQFP package. It belongs to the USB interface-controller hierarchy: USB hub controller, USB interface IC, interface integrated circuit, and semiconductor. Its verified device description identifies support for four downstream USB ports while allowing an optional serial EEPROM connection for configuration or device-specific control data. The TUSB2043VF uses a 48 MHz oscillator or clock source as its input clock, as stated in the verified manufacturer-related listing. Because this legacy hub controller depends on a relatively high-frequency clock, PCB layout should preserve short clock paths, provide clean return paths, and decouple supply pins close to the device. The 32-LQFP package offers enough perimeter pins for USB data, power, clock, configuration, and optional EEPROM connections, although a complete verified pin map is not included in the supplied data. A major engineering consideration is USB signal integrity. Each enabled USB data path must be routed as a controlled-impedance differential pair on a multilayer PCB, with minimal stubs and carefully planned layer transitions. Power-distribution inductance can cause transient voltage excursions when a downstream device is attached or removed, so bulk and local decoupling should be evaluated together. The optional serial EEPROM interface adds an additional bus that must be routed with suitable signal-integrity practices. Typical uses include legacy USB hubs, USB expansion equipment, computer peripherals, industrial data-acquisition systems, and embedded host or peripheral designs that require four downstream ports. Engineers should confirm host compatibility, downstream current budget, USB speed, enumerator behavior, electrical characteristics, and mechanical footprint against the manufacturer datasheet before using this obsolete device in a new production design. The principal design tradeoff is lifecycle risk. A distributor result explicitly describes TUSB2043VF as obsolete, while another distributor lists it for purchase or RFQ. For new designs, compare current-generation USB hub controllers unless an existing platform specifically requires the TUSB2043VF footprint and behavior. This page consolidates the verified product description, distributor availability references, package information, lifecycle indication, and explicit data gaps. It also separates known facts from missing parameters so engineers can assess whether the legacy controller remains appropriate without mistaking unverified specifications for manufacturer data.

RFQ যোগাযোগ
TUSB2043VFR - 4-Port USB Hub with EEPROM | Texas Instruments (Tape & Reel)
TUSB2043VFR

TUSB2043VFR - 4-Port USB Hub with EEPROM | Texas Instruments (Tape & Reel)

Texas Instruments TUSB2043VFR is a four-port USB hub controller with an optional serial EEPROM interface, a 48 MHz oscillator or clock source, and a 32-pin LQFP package. It belongs to the USB interface-controller hierarchy: USB hub controller, USB interface IC, interface integrated circuit, and semiconductor. Its verified device description identifies support for four downstream USB ports while allowing an optional serial EEPROM connection for configuration or device-specific control data. The TUSB2043VFR uses a 48 MHz oscillator or clock source as its input clock, as stated in the verified manufacturer-related listing. Because this legacy hub controller depends on a relatively high-frequency clock, PCB layout should preserve short clock paths, provide clean return paths, and decouple supply pins close to the device. The 32-LQFP package offers enough perimeter pins for USB data, power, clock, configuration, and optional EEPROM connections, although a complete verified pin map is not included in the supplied data. A major engineering consideration is USB signal integrity. Each enabled USB data path must be routed as a controlled-impedance differential pair on a multilayer PCB, with minimal stubs and carefully planned layer transitions. Power-distribution inductance can cause transient voltage excursions when a downstream device is attached or removed, so bulk and local decoupling should be evaluated together. The optional serial EEPROM interface adds an additional bus that must be routed with suitable signal-integrity practices. Typical uses include legacy USB hubs, USB expansion equipment, computer peripherals, industrial data-acquisition systems, and embedded host or peripheral designs that require four downstream ports. Engineers should confirm host compatibility, downstream current budget, USB speed, enumerator behavior, electrical characteristics, and mechanical footprint against the manufacturer datasheet before using this obsolete device in a new production design. The principal design tradeoff is lifecycle risk. A distributor result explicitly describes TUSB2043VFR as obsolete, while another distributor lists it for purchase or RFQ. For new designs, compare current-generation USB hub controllers unless an existing platform specifically requires the TUSB2043VFR footprint and behavior. This page consolidates the verified product description, distributor availability references, package information, lifecycle indication, and explicit data gaps. It also separates known facts from missing parameters so engineers can assess whether the legacy controller remains appropriate without mistaking unverified specifications for manufacturer data.

RFQ যোগাযোগ
TUSB2046AVF - 4-Port USB Hub | Texas Instruments
TUSB2046AVF

TUSB2046AVF - 4-Port USB Hub | Texas Instruments

The Texas Instruments TUSB2046AVF is a four-port USB hub controller compatible with USB 1.1 and USB 2.0 full-speed operation at 12 Mbit/s. It uses a 3.3 V low-power ASIC logic implementation, integrates USB transceivers and a state machine, and supports an optional serial EEPROM interface for hub configuration. The device is packaged in a 32-pin LQFP with a 0.8 mm pin pitch. A USB hub controller is a semiconductor interface device that manages one upstream USB connection and distributes it among multiple downstream ports. The TUSB2046AVF belongs to the USB interface-controller hierarchy, where it sits between a host controller or host computer and USB peripherals such as keyboards, mice, printers, storage devices, and industrial USB equipment. Its integrated transceivers reduce the number of external USB data-path components required in a hub design. The principal feature set includes four downstream hub ports, USB full-speed operation at 12 Mbit/s, integrated USB transceivers, integrated state-machine logic, and an optional serial EEPROM interface. The EEPROM connection can provide a configurable hub identity and descriptors when the system designer does not use a different configuration method. A 3.3 V operating rail also allows the controller to operate in conventional 3.3 V digital systems without a dedicated 5 V hub-controller supply. The TUSB2046A controller combines a four-port USB full-speed hub architecture with low-power 3.3 V logic. Because it is a full-speed rather than high-speed USB 2.0 hub controller, its 12 Mbit/s maximum data rate is appropriate for legacy peripherals, keyboards, mice, service interfaces, and other devices that do not require 480 Mbit/s USB high-speed transfers. The optional EEPROM interface adds configuration flexibility without making serial EEPROM mandatory in every implementation. Typical applications include legacy USB expansion, embedded host systems, industrial data-acquisition equipment, USB peripheral connection hubs, and retrofits that add USB connectivity to equipment designed around older host interfaces. In each case, the four-port organization consolidates several full-speed peripherals behind one upstream USB link while keeping the implementation compact. PCB design should preserve short, impedance-controlled USB signal paths, provide clean power and ground distribution, and place input and output capacitance close to the relevant device pins as directed by the manufacturer datasheet. Designers should also verify the upstream and downstream connector overcurrent, power-budget, and USB signal-integrity requirements for the complete hub assembly. This page organizes the confirmed device identity, package details, interface capabilities, sourcing path, application guidance, and verified drop-in alternatives for engineers. Because detailed pin assignments and several electrical limits are not established by the accessible manufacturer material, the datasheet should remain the controlling reference before schematic release or PCB layout approval.

RFQ যোগাযোগ
TUSB2046BVF - 4-Port USB 2.0 Full-Speed Hub | TI (Tape & Reel)
TUSB2046BVF

TUSB2046BVF - 4-Port USB 2.0 Full-Speed Hub | TI (Tape & Reel)

The Texas Instruments TUSB2046BVF is a 4-port USB 2.0 full-speed (12 Mbps) hub controller with one upstream port and four downstream ports, implemented as a pure state-machine (no CPU core) in a 32-pin LQFP (VF, 7x7 mm) package. It operates from a single 3.0 V to 3.6 V supply, drawing approximately 40 mA, over a 0 C to 70 C commercial temperature range. A USB hub controller is a dedicated interface IC that expands a single USB upstream connection into multiple downstream ports, handling enumeration, transaction translation at the protocol level, and per-port power management. Within the system hierarchy it sits in the connectivity layer: interface IC > USB controller > hub controller, alongside host controllers and device controllers in a complete USB subsystem. Key features include full compliance with the USB specification as a full-speed hub (TI design TID #30220231), integrated USB transceivers that eliminate external PHY components, and an optional serial EEPROM interface for storing customized VID/PID and configuration data. Support for Win95/DOS-style operation and a pure hardware state-machine architecture reduce firmware complexity to zero - the hub enumerates automatically on plug-in. The TUSB2046B is fabricated on a low-power 3.3 V ASIC CMOS process. Because there is no embedded microcontroller, no firmware development, flash programming, or in-circuit emulator is required, which shortens qualification cycles and removes a whole class of field-update failure modes. The device supports individual downstream port power switching and overcurrent status inputs for compliant bus-powered and self-powered hub designs. Typical applications include standalone USB hubs, monitor and keyboard-display hubs, industrial and medical equipment USB expansion, and adding USB ports to embedded systems built around host processors without native hub capability. For design, provide 0.1 uF decoupling at each supply pin, strap configuration pins (or fit the optional EEPROM) for power-mode selection, and size port power switches per downstream port load. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ যোগাযোগ
TUSB2046BVFR - 4-Port USB 2.0 Full-Speed Hub | TI
TUSB2046BVFR

TUSB2046BVFR - 4-Port USB 2.0 Full-Speed Hub | TI

The Texas Instruments TUSB2046BVFR is a 4-port USB 2.0 full-speed (12 Mbps) hub controller with one upstream port and four downstream ports, implemented as a pure state-machine (no CPU core) in a 32-pin LQFP (VF, 7x7 mm) package. It operates from a single 3.0 V to 3.6 V supply, drawing approximately 40 mA, over a 0 C to 70 C commercial temperature range. A USB hub controller is a dedicated interface IC that expands a single USB upstream connection into multiple downstream ports, handling enumeration, transaction translation at the protocol level, and per-port power management. Within the system hierarchy it sits in the connectivity layer: interface IC > USB controller > hub controller, alongside host controllers and device controllers in a complete USB subsystem. Key features include full compliance with the USB specification as a full-speed hub (TI design TID #30220231), integrated USB transceivers that eliminate external PHY components, and an optional serial EEPROM interface for storing customized VID/PID and configuration data. Support for Win95/DOS-style operation and a pure hardware state-machine architecture reduce firmware complexity to zero - the hub enumerates automatically on plug-in. The TUSB2046B is fabricated on a low-power 3.3 V ASIC CMOS process. Because there is no embedded microcontroller, no firmware development, flash programming, or in-circuit emulator is required, which shortens qualification cycles and removes a whole class of field-update failure modes. The device supports individual downstream port power switching and overcurrent status inputs for compliant bus-powered and self-powered hub designs. Typical applications include standalone USB hubs, monitor and keyboard-display hubs, industrial and medical equipment USB expansion, and adding USB ports to embedded systems built around host processors without native hub capability. For design, provide 0.1 uF decoupling at each supply pin, strap configuration pins (or fit the optional EEPROM) for power-mode selection, and size port power switches per downstream port load. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ যোগাযোগ
TUSB2046BVFRG4 - 4-Port USB 2.0 Full-Speed Hub | Texas Instruments
TUSB2046BVFRG4

TUSB2046BVFRG4 - 4-Port USB 2.0 Full-Speed Hub | Texas Instruments

The Texas Instruments TUSB2046BVFRG4 is a 4-port USB 2.0 full-speed hub controller operating at 12 Mbps from a 3.3 V supply, housed in a 32-pin LQFP (7x7 mm) package with an optional serial EEPROM interface and a 0C to +70C commercial operating range. A USB hub controller is an interface IC that expands a single upstream USB port into multiple downstream ports, handling enumeration, transaction translation at the protocol level, and port power management. It sits within the USB device hierarchy between the host controller and downstream peripherals, forming a sub-family of the broader USB interface and connectivity IC class within semiconductor interface products. Key features include one upstream port and four downstream ports compliant with the USB 2.0 specification at full speed (12 Mbps), support for both low-speed (1.5 Mbps) and full-speed downstream devices, an optional serial EEPROM interface for storing vendor ID / product ID configuration data, and overcurrent detection inputs with power-switch control outputs for per-port or ganged power switching. Implementation with a digital state machine instead of an embedded microcontroller eliminates firmware development and reduces BOM complexity. Technical depth: because the TUSB2046B is a pure hardware state-machine design, enumeration latency is deterministic and there is no firmware to qualify, update, or corrupt. The 3.3 V CMOS core with integrated 3.3 V regulator support keeps external components minimal, typically requiring only a 6 MHz or 48 MHz clock source, bypass capacitors, and the external power switches for downstream VBUS. Typical applications include PC monitor hubs, docking stations, industrial panel USB expansion, printer and multifunction peripheral front panels, and embedded systems requiring additional USB ports from a single host connection. The 12 Mbps full-speed rating suits HID devices, flash drives, and instrumentation rather than high-bandwidth video or mass-storage arrays. Design consideration: budget downstream VBUS power carefully - each downstream port may supply up to 500 mA at 5 V per the USB specification, so external power MOSFET switches and overcurrent sensing resistors must be sized for the aggregate load, and the OVERCURRENT inputs must be wired to the correct power-switch pins. This page synthesizes distributor pricing context, drop-in alternatives, lifecycle status, and practical design notes not found in the manufacturer datasheet alone.

RFQ যোগাযোগ
TUSB2046IBVF - 4-Port 12-Mbps USB Hub Controller | TI
TUSB2046IBVF

TUSB2046IBVF - 4-Port 12-Mbps USB Hub Controller | TI

Texas Instruments TUSB2046IBVF is a 3.3 V CMOS full-speed USB hub controller with one upstream port, four downstream ports, a 12 Mbps operating rate, and an optional serial EEPROM interface. The device is packaged in a 32-pin LQFP (VF) package with a 0.8 mm terminal pitch and supports an operating temperature range of -40°C to +85°C. A USB hub controller is an interface semiconductor that manages traffic between one host or upstream port and multiple downstream peripherals. Within the USB interface hierarchy, the TUSB2046IBVF combines USB 2.0 full-speed hub connectivity, downstream-port power management, and optional configuration-memory support in one controller. This makes it useful for adding USB connectivity to industrial equipment, embedded systems, printers, test systems, and other peripheral-heavy products. The principal features are four downstream USB ports, one upstream port, full-speed operation at 12 Mbps, 3.3 V CMOS supply operation, and optional serial EEPROM support. The 32-LQFP package provides 32 externally accessible connections for USB data, power, control, configuration, clocking, and ground functions. Its industrial temperature range supports applications requiring operation from -40°C to +85°C. Technically, the device is designed around the Universal Serial Bus specification as a full-speed hub. The optional EEPROM interface allows product-specific hub descriptors and configuration data to be loaded during startup, while the four downstream ports expand a single host connection into multiple peripheral connections. The exact upstream and downstream data-rate support, electrical limits, and descriptor behavior should be confirmed from the manufacturer datasheet before final circuit design. Typical applications include industrial control panels, USB-to-serial expansion equipment, instrumentation, embedded test and measurement systems, peripheral hubs, and compact USB distribution products. In these systems, the controller reduces the need for separate USB switch devices while centralizing port routing and configuration. The principal PCB requirement is careful USB signal routing. Keep upstream and downstream differential pairs short, matched, and away from noisy switching nodes. Confirm the required external EEPROM, crystal or clock components, capacitors, and USB power-distribution network against the manufacturer reference schematic before layout release. This page organizes the TUSB2046IBVF specifications, qualified same-footprint alternatives, interface applications, comparison parameters, and practical implementation guidance. These engineering details help designers evaluate controller compatibility without relying only on a basic distributor listing.

RFQ যোগাযোগ
TUSB2070PT - 7-Port USB 1.0 Hub Controller | Texas Instruments
TUSB2070PT

TUSB2070PT - 7-Port USB 1.0 Hub Controller | Texas Instruments

The Texas Instruments TUSB2070PT is a CMOS 7-port USB hub controller that conforms to USB Specification Version 1.0, supplied in a 48-pin LQFP (PT) surface-mount package with a 0 °C to +70 °C commercial operating temperature range. According to the manufacturer datasheet, the device provides up to seven downstream ports from a single upstream connection, consolidating multiple legacy USB peripherals behind one host port. A USB hub controller is a type of USB interface controller: it sits between a host and one or more downstream devices, managing enumeration, power distribution, and data traffic across the bus. In the product-type hierarchy, a USB hub controller belongs to interface controllers, which are a subset of integrated circuits used for signal and protocol bridging. In an end system, the hub controller provides the physical fan-out layer between a single USB port and several peripherals, sitting below the host controller and above the physical USB transceiver layer. Key characteristics of the TUSB2070PT include support for up to seven downstream ports, full-speed operation under USB Specification 1.0 rules, a monolithic CMOS implementation, and a single upstream port connection for the host link. The 48-pin LQFP (PT) body gives generous pin count for port-level control and status signalling, while the industrial-temperature 0 °C to +70 °C range suits commercial and light-industrial equipment. Detailed electrical ratings such as supply voltage, I/O current, and internal oscillator tolerance are not stated in the retrieved data and must be confirmed against the manufacturer datasheet. Architecturally, the device implements the split-transaction, single-master USB 1.0 protocol stack internally, including host-controller interface signalling toward the upstream port and per-port transceiver interfacing toward downstream ports. It is a legacy architecture: modern designs normally use USB 2.0 high-speed hubs with integrated PHY and charge-pump regulators, so the TUSB2070 remains most relevant where a legacy USB 1.0 host must be expanded without changing the upstream device class. Typical uses include legacy personal-computer and embedded host systems needing additional full-speed USB ports, industrial data-acquisition panels, point-of-sale and print peripherals, and test benches that replicate USB 1.0 topologies. Because it is an established, widely supported part with a long service history, it is frequently found in repair and legacy-platform maintenance programs. Two design considerations matter most. First, the device is no longer the newest Texas Instruments 7-port hub: the manufacturer lists the TUSB2077A, also in a 48-LQFP package, as the replacement, so new designs should start there. Second, a 48-LQFP body demands careful decoupling and ground-plane continuity to keep USB signal integrity within the 1.0 specification budget. This page consolidates distributor availability signals, a drop-in replacement analysis for the 48-LQFP 7-port hub footprint, lifecycle guidance, and practical design notes that are not gathered together in a single manufacturer datasheet.

RFQ যোগাযোগ
TUSB2077APT - 7-Port USB 2.0 Hub Controller | Texas Instruments
TUSB2077APT

TUSB2077APT - 7-Port USB 2.0 Hub Controller | Texas Instruments

The Texas Instruments TUSB2077APT is a seven-port Universal Serial Bus hub controller operating as a full-speed USB 2.0 device at 12 Mbps. The controller is offered in a 48-pin LQFP package with a 7 mm by 7 mm body. It integrates USB hub logic with an optional serial EEPROM interface for product identification and configurable USB descriptors. A USB hub controller is an interface semiconductor that manages one upstream USB connection and multiple downstream ports. In the broader hierarchy, the TUSB2077APT belongs to the USB interface controller class, within interface integrated circuits and general-purpose semiconductor devices. Its seven-port architecture allows several USB peripherals to share one host controller while individual downstream connections can be enabled, disabled, or managed for power and enumeration requirements. The manufacturer identifies the TUSB2077APT as a seven-port full-speed USB 2.0 hub controller. It supports both bus-powered and self-powered operating modes, which allows the hub to be designed around the power budget of a host device or with a dedicated external supply. The optional serial EEPROM interface provides a path for storing descriptor information rather than relying only on the controller's default descriptor behavior. The EXTMEM control is connected to pin 47 and determines whether the optional EEPROM interface is enabled. According to the Texas Instruments TUSB2077A product page, driving EXTMEM high enables the optional EEPROM function and causes the vendor and product identifiers to use defaults, including enumeration as a General Purpose USB Hub. This makes EXTMEM an important PCB-level design and firmware-configuration decision. Typical uses include compact USB expansion products, computer peripherals, docking equipment, industrial control panels, test systems, and embedded systems that need several full-speed USB connections. A design must allocate upstream and downstream signal routing, verify power-source requirements, and configure the hub for either bus-powered or self-powered operation. The optional EEPROM path should be assessed early because its presence or absence affects descriptor customization and board population. Use the manufacturer pin-description table and package drawing when assigning all 48 pins and laying out the LQFP footprint. The downstream data paths require careful, impedance-conscious routing, while power and ground connections need enough copper area to support the selected operating mode. Designers should also confirm the configuration of EXTMEM at pin 47 and the intended behavior of the optional EEPROM interface. This product record combines the manufacturer's hub-function details, package and pin-count information, lifecycle information, sourcing context, and a conservative drop-in comparison. It also identifies practical design decisions that are easy to overlook: descriptor customization, EXTMEM configuration, power-mode selection, and validation of every candidate replacement before PCB substitution.

RFQ যোগাযোগ
TUSB2077APTR - 7-Port USB 2.0 Hub Controller | Texas Instruments (Tape & Reel)
TUSB2077APTR

TUSB2077APTR - 7-Port USB 2.0 Hub Controller | Texas Instruments (Tape & Reel)

The Texas Instruments TUSB2077APTR is a seven-port Universal Serial Bus hub controller operating as a full-speed USB 2.0 device at 12 Mbps. The controller is offered in a 48-pin LQFP package with a 7 mm by 7 mm body. It integrates USB hub logic with an optional serial EEPROM interface for product identification and configurable USB descriptors. A USB hub controller is an interface semiconductor that manages one upstream USB connection and multiple downstream ports. In the broader hierarchy, the TUSB2077APTR belongs to the USB interface controller class, within interface integrated circuits and general-purpose semiconductor devices. Its seven-port architecture allows several USB peripherals to share one host controller while individual downstream connections can be enabled, disabled, or managed for power and enumeration requirements. The manufacturer identifies the TUSB2077APTR as a seven-port full-speed USB 2.0 hub controller. It supports both bus-powered and self-powered operating modes, which allows the hub to be designed around the power budget of a host device or with a dedicated external supply. The optional serial EEPROM interface provides a path for storing descriptor information rather than relying only on the controller's default descriptor behavior. The EXTMEM control is connected to pin 47 and determines whether the optional EEPROM interface is enabled. According to the Texas Instruments TUSB2077A product page, driving EXTMEM high enables the optional EEPROM function and causes the vendor and product identifiers to use defaults, including enumeration as a General Purpose USB Hub. This makes EXTMEM an important PCB-level design and firmware-configuration decision. Typical uses include compact USB expansion products, computer peripherals, docking equipment, industrial control panels, test systems, and embedded systems that need several full-speed USB connections. A design must allocate upstream and downstream signal routing, verify power-source requirements, and configure the hub for either bus-powered or self-powered operation. The optional EEPROM path should be assessed early because its presence or absence affects descriptor customization and board population. Use the manufacturer pin-description table and package drawing when assigning all 48 pins and laying out the LQFP footprint. The downstream data paths require careful, impedance-conscious routing, while power and ground connections need enough copper area to support the selected operating mode. Designers should also confirm the configuration of EXTMEM at pin 47 and the intended behavior of the optional EEPROM interface. This product record combines the manufacturer's hub-function details, package and pin-count information, lifecycle information, sourcing context, and a conservative drop-in comparison. It also identifies practical design decisions that are easy to overlook: descriptor customization, EXTMEM configuration, power-mode selection, and validation of every candidate replacement before PCB substitution.

RFQ যোগাযোগ
TUSB211RWBR - 480 Mbps USB 2.0 Signal Conditioner | TI
TUSB211RWBR

TUSB211RWBR - 480 Mbps USB 2.0 Signal Conditioner | TI

Texas Instruments TUSB211RWBR is a USB 2.0 high-speed signal conditioner designed to compensate for intersymbol interference in USB transmission channels. The device supports USB high-speed operation at 480 Mbps and is offered in a 12-pin X2QFN package measuring 1.6 mm by 1.6 mm. Its compact footprint makes the TUSB211 suitable for USB ports, cable extensions, peripheral connections, and embedded systems where signal loss can impair data integrity. A USB high-speed signal conditioner is an interface device placed within a USB 2.0 data path to improve signal quality across lossy interconnects. USB high-speed signaling uses differential data lines with significant bandwidth requirements, making cable length, connector transitions, PCB routing, and impedance discontinuities important system-level considerations. The TUSB211 belongs to the broader hierarchy of signal-processing interface ICs, interface ICs, and semiconductor devices designed to preserve data integrity between hosts, hubs, and USB peripherals. The primary function of the TUSB211 is to restore a degraded differential signal by compensating for channel-induced loss and intersymbol interference. Its USB 2.0 high-speed capability permits operation at 480 Mbps, allowing a link to remain functional over channels that would otherwise suffer from reduced eye opening or communication errors. Because the signal-conditioning stage operates within the data path, placement and layout can determine how effectively it corrects the intended channel. The RWB ordering code identifies the compact 12-X2QFN configuration used by TUSB211RWBR. Its small surface-mount package supports high-density PCB layouts, although accurate placement requires careful attention to differential-pair geometry, ground-return paths, and decoupling. The manufacturer product information lists the device as a USB 2.0 480-Mbps high-speed signal conditioner and identifies TUSB211RWBR as a 12-pin RWB package variant. Typical uses include USB host-to-peripheral links, USB-to-wireless bridges, industrial USB connections, peripheral docking systems, and cable-extension designs. The device is especially relevant when a connector, cable, or long PCB route introduces measurable high-speed attenuation and the designer wants to recover usable eye margin without replacing the entire USB interface implementation. When laying out a design, treat the conditioner as part of the high-speed channel rather than as an isolated IC. Verify differential impedance, minimize impedance discontinuities, provide the required local bypassing, and place the device where the channel losses remain predictable. Confirm signal-eye and compliance behavior with the complete connector, cable, host, and peripheral combination because channel length and topology can change the amount of correction required. This product page combines the exact TUSB211RWBR ordering information with practical USB signal-integrity guidance, compatibility-focused alternatives, and a side-by-side view of the electrical and packaging constraints that determine whether a substitution can be implemented without a PCB redesign.

RFQ যোগাযোগ
TUSB212RWBR - USB 2.0 HS Signal Conditioner | Texas Instruments
TUSB212RWBR

TUSB212RWBR - USB 2.0 HS Signal Conditioner | Texas Instruments

Texas Instruments TUSB212RWBR is a USB 2.0 High-Speed signal conditioner with DC boost, packaged in a 12-X2QFN surface-mount package measuring 1.6 mm by 1.6 mm. It is designed to compensate for intersymbol interference caused by signal loss in a transmission channel. The device applies programmable AC boost and DC boost to restore degraded high-speed data signals while remaining agnostic to USB Low-Speed and Full-Speed traffic. A USB signal conditioner is a specialized interface IC that improves an already transmitted USB differential signal without changing the protocol implemented by the USB host, hub, or peripheral. Its position in the signal path is between the transmitter and a lossy channel. This makes the TUSB212RWBR part of the broader USB interface hierarchy: USB 2.0 interface IC, signal conditioning IC, redriver, and ultimately a semiconductor-based connectivity device. The principal feature of the TUSB212RWBR is programmable signal AC boost combined with DC boost. AC boost restores high-frequency signal amplitude lost through channel attenuation, while DC boost helps maintain the differential voltage required for reliable high-speed signaling. The manufacturer describes the implementation as patent pending and identifies USB On-The-Go compatibility as an additional design feature. Low-Speed and Full-Speed signal characteristics remain unaffected by the conditioning function. TUSB212RWBR is intended for USB 2.0 systems where trace losses, connector transitions, cable segments, or routing discontinuities reduce High-Speed eye margin. Conditioning is normally applied to the D+ and D+ differential pair as a complete pair rather than to either conductor independently. The correction must be tuned from measured eye diagrams because excessive boost can increase edge distortion, jitter, or emissions instead of improving receiver recovery. Typical deployments include USB hubs, cable assemblies, peripheral boards, host adapters, test equipment, and USB-to-storage or USB-to-network interfaces. In a hub, the conditioner can be placed near an upstream port so the signal entering a long cable is restored before attenuation becomes significant. In a peripheral, it can compensate for PCB routing from a connector to a USB controller. When applying the device, preserve the USB differential impedance recommended by the manufacturer and keep the D+ and D+ routes coupled and symmetric. Decoupling and boost configuration should follow the manufacturer reference layout. Confirm compliance through eye-height, jitter, rise-time, and emissions measurements because channel length, connector geometry, and host behavior determine the useful correction amount. This product page combines the manufacturer's USB 2.0 signal-conditioning description, exact TUSB212RWBR package information, extracted distributor pricing, and practical replacement analysis. It also distinguishes confirmed drop-in candidates from unsupported package or functional substitutions so engineers can make a PCB-level decision without relying on generic USB redriver recommendations.

RFQ যোগাযোগ
TUSB212RWBT - USB 2.0 HS Signal Conditioner | Texas Instruments
TUSB212RWBT

TUSB212RWBT - USB 2.0 HS Signal Conditioner | Texas Instruments

The Texas Instruments TUSB212RWBT is a USB 2.0 high-speed signal conditioner with DC boost, housed in a 12-X2QFN surface-mount package measuring 1.6 mm by 1.6 mm. It is designed to compensate for intersymbol interference in lossy USB channels while supporting Low-Speed, Full-Speed, and High-Speed signaling. The device is configurable by pin strap or I2C and supports selectable signal gain, including daisy-chain operation for high-loss applications. A USB signal conditioner is an interface IC placed within a USB data path to improve signal integrity without changing the underlying USB protocol. Its hierarchy is USB interface device, signal-processing interface IC, and interface IC. The TUSB212 specifically targets USB 2.0 channels in which connector launches, PCB traces, cables, or intervening devices have introduced bandwidth-related distortion. The conditioner supports USB 2.0, OTG 2.0, and Battery Charger 1.2 environments as identified by Texas Instruments. The principal features include programmable AC boost, programmable DC boost, pin-strap or I2C configuration, and selectable gain. According to the manufacturer product page, the device supports channels up to 5 meters before the conditioning point or 2 meters after it. It also handles D1P/M and D2P/M interchangeably, is agnostic to host or device roles, and maintains compatibility across Low-Speed, Full-Speed, and High-Speed signals. Technically, the TUSB212 applies frequency-dependent correction intended to counter channel loss and intersymbol interference. AC boost controls the high-frequency correction applied to the data waveform, while DC boost adjusts the low-frequency transition baseline. Four selectable AC boost settings are described by Texas Instruments, and the I2C or pin-strap interface allows implementation choices to suit board constraints. The design is intended to preserve Low-Speed and Full-Speed characteristics while compensating High-Speed signals. Typical applications include USB hubs, host controllers, peripheral ports, cable assemblies, docking systems, and test equipment with degraded or lossy channels. The interchangeable D1P/M and D2P/M interfaces simplify symmetrical USB routing, while the compact 12-X2QFN package supports space-constrained portable and industrial designs. The I2C configuration option also permits controlled adjustments where fixed pin straps are insufficient. Designers should place the conditioner close to the channel impairment boundary and confirm the supported pre-channel or post-channel distance. USB differential routing must preserve controlled impedance and minimize stubs, while the I2C and configuration pins require appropriate pull networks. Verify the selected boost setting with compliance masks, eye diagrams, and worst-case cable and connector combinations rather than relying on nominal channel length alone.

RFQ যোগাযোগ
TUSB2136PM - 2-Port USB 2.0 Hub Controller | Texas Instruments
TUSB2136PM

TUSB2136PM - 2-Port USB 2.0 Hub Controller | Texas Instruments

Texas Instruments TUSB2136PM is a USB 2.0 two-port hub controller with an integrated general-purpose function controller, supplied in a 64-LQFP surface-mount package measuring 10 mm by 10 mm. It operates from a 3 V to 3.6 V supply and is specified for a 0 °C to 70 °C ambient operating range. The component is listed as active and is intended for USB interface and hub-controller designs. A USB hub controller is an interface integrated circuit that manages a USB host connection and coordinates attached USB devices. Within the product hierarchy, a USB 2.0 hub controller is an interface IC, a USB interface device, and a semiconductor. This TUSB2136 variant combines two-port hub control with a general-purpose function controller, allowing the hub function and device-side control logic to be consolidated within one package. The principal verified features are two USB 2.0 ports, a 3 V to 3.6 V operating-supply range, and integrated general-purpose function control. The controller is packaged in a 64-pin LQFP measuring 10 mm by 10 mm, providing a surface-mount implementation for compact USB equipment. The operating temperature range of 0 °C to 70 °C identifies it as a commercial-temperature option rather than an explicitly automotive-qualified or extended-temperature device. The TUSB2136PM combines a compound USB hub function with an embedded general-purpose 8052 MCU, as identified in the supplied datasheet result. This architecture is useful when downstream equipment needs local device handling, configuration logic, or peripheral control in addition to standard USB hub behavior. Its consolidated approach can reduce the number of discrete interface components required around a USB connection, although the complete implementation must be validated against the manufacturer datasheet and reference design. Typical uses include USB connection hubs, computer peripherals, docking equipment, and embedded USB interface products. Its two-port configuration is appropriate for systems that need to expose multiple USB connections through one upstream USB link. Integration of the general-purpose function controller is especially relevant to designs in which hub management must coexist with vendor-specific control behavior or device-specific handling. Designers should pay particular attention to USB signal routing, supply decoupling, and the exact pin assignments shown in the manufacturer documentation. Because the verified sources do not provide the complete pin table, crystal requirements, programming interface, USB transceiver details, or decoupling values, those items must be obtained from the official datasheet before schematic capture. No automotive qualification or regulatory status beyond the supplied active-status information should be inferred. This page combines the verified USB version, port count, supply range, package, temperature range, lifecycle status, and distributor availability information with practical integration guidance. It also distinguishes documented characteristics from unknown electrical details and avoids presenting unverified pinout or replacement claims as drop-in-compatible alternatives.

RFQ যোগাযোগ
TUSB2140BN USB 1.1 4-Port Hub Controller | Texas Instruments
TUSB2140BN

TUSB2140BN USB 1.1 4-Port Hub Controller | Texas Instruments

The Texas Instruments TUSB2140BN is a USB 1.1 interface controller for four-port USB hub applications, supplied in a 40-pin DIP package measuring 0.600 inches, or 15.24 mm, across. The device is identified by distributors as a USB interface bus controller with integrated transceiver characteristics, and it is associated with an I2C microcontroller interface in supplier documentation. The verified product information confirms a through-hole DIP format, commercial temperature grade, and 40 terminals. It also confirms availability through multiple distributors, including 6,048 pieces reported by Heisener and a unit price of $6.4513 as of 2026-10-30. The TUSB2140BN is therefore positioned as a legacy USB hub controller for systems requiring four downstream USB ports rather than a general-purpose USB interface transceiver. Its 40-DIP package favors prototype boards, legacy industrial equipment, and expansion systems where through-hole assembly is acceptable. The supplied listings do not provide a complete official electrical table, exact pin assignments, transfer-rate details beyond USB 1.1, or a current manufacturer lifecycle statement. Those parameters remain identified as data needed rather than being inferred from similar devices. A practical design review should therefore begin with the official TUSB2140B datasheet, especially for D+/D- routing, power-switching requirements, crystal or clock connections, I2C address programming, and termination requirements. In a USB hub design, the controller manages downstream-port enumeration and shared upstream-bus behavior, while external power-distribution and protection components determine how safely multiple peripherals can be connected.

RFQ যোগাযোগ
TUSB2140N - 4-Port USB 2.0 Hub Controller | Texas Instruments
TUSB2140N

TUSB2140N - 4-Port USB 2.0 Hub Controller | Texas Instruments

Texas Instruments TUSB2140N is a 4-port USB 2.0 hub controller with embedded function, a maximum clock frequency of 48 MHz, I2C bus compatibility, and a 40-pin through-hole DIP package. It is designed for industrial USB hub equipment requiring multiple downstream ports and centralized control. The verified sources identify TUSB2140N as the original 40-PDIP member of the TUSB2140 family and note that it was replaced by TUSB2046B. A USB hub controller is an interface IC that manages traffic between one upstream USB host connection and multiple downstream USB ports. Within the product hierarchy, it is a USB interface controller, bus controller, interface IC, and semiconductor. By organizing USB connectivity and exposing configuration functions through a compatible control bus, this type of device reduces the amount of discrete logic required in a multiport USB product. The TUSB2140N provides four downstream hub ports, operates up to 48 MHz, supports I2C compatibility, and is available in a 40-terminal rectangular DIP package. The verified distributor data classifies it as an industrial-temperature component with through-hole terminals. These characteristics make it relevant to legacy industrial USB hubs, embedded USB expansion equipment, and systems designed around the original TUSB2140 interface rather than newer hub controllers. Technically, the device combines USB host-interface management and an embedded function in one controller. Its 48 MHz maximum operating frequency supports the clocking requirements associated with this USB 2.0 hub-controller generation, while I2C compatibility offers a practical path to configuration and supervisory control. The 40-pin DIP format favors through-hole assembly and repairability, but it consumes considerably more board area than contemporary surface-mount hub controllers. Typical applications include industrial USB hubs, embedded test equipment, peripheral aggregation systems, legacy USB expansion cards, and OEM products that retain the TUSB2140 architecture. Because the part is an older through-hole design, engineers should also assess modern surface-mount alternatives or the indicated TUSB2046B successor when new PCB area, sourcing, or lifecycle constraints favor redesign. The primary design consideration is lifecycle and availability. Verified marketplace data states that TUSB2140N was replaced by TUSB2046B, while current stock and pricing are offered through brokers and distributors. For new production, confirm lifecycle status, exact electrical compatibility, and pin-level equivalence before substituting any successor; a USB hub change can affect enumeration, power management, and downstream-port behavior. This page consolidates verified distributor specifications, the replacement relationship, source links, and engineering selection guidance. It distinguishes documented TUSB2140N attributes from unavailable parameters, helping procurement and design engineers make a grounded legacy-support or migration decision.

RFQ যোগাযোগ
TUSB2140PAG - 4-Port USB Hub with Embedded Function | Texas Instruments
TUSB2140PAG

TUSB2140PAG - 4-Port USB Hub with Embedded Function | Texas Instruments

Texas Instruments TUSB2140PAG is a 4-port USB hub controller with an embedded function, a 12 Mbps USB interface, a maximum clock frequency of 48 MHz, and a maximum supply voltage of 3.6 V. The device is packaged for surface-mount assembly in a 64-terminal TQFP package. Its combination of USB hub control and embedded functionality is intended for systems that need to consolidate USB connectivity without implementing every protocol and port-management function in external hardware. A USB hub controller is an interface IC that manages one upstream USB connection and multiple downstream ports. The broader hierarchy is USB interface IC, then interface IC, integrated circuit, and semiconductor. Within that hierarchy, the TUSB2140PAG adds an embedded function to the conventional hub role, allowing a compact design to manage USB topology while supporting additional device-specific behavior. This makes the device relevant to USB expansion, embedded control, peripheral aggregation, and legacy USB system designs. Key characteristics include four downstream ports, a 12 Mbps interface, operation with a maximum 3.6 V supply, and support for a 48 MHz maximum clock frequency. The 64-terminal surface-mount package provides the electrical connections required for the upstream interface, downstream ports, power-management signals, clocking, configuration, and embedded-function implementation. Exact pin names, electrical limits, and recommended capacitor values should be confirmed against the manufacturer datasheet before schematic capture or PCB release. Technically, the TUSB2140 belongs to the family of Texas Instruments bus controllers and USB interface integrated circuits. A centralized hub can reduce the number of host USB ports required from an embedded processor or host controller while allowing several peripherals to share one upstream connection. The 48 MHz clock specification defines the device's maximum operating clock, whereas the 3.6 V maximum supply establishes the upper boundary for system-level power design. Designers must also account for USB data-routing topology, termination, decoupling, enumeration behavior, and downstream-port power requirements. Typical applications include industrial USB-to-USB expansion, embedded USB test equipment, peripheral aggregation, legacy computer and communications equipment, and controlled embedded systems requiring more downstream USB connections. The embedded-function architecture may simplify boards that previously required a hub controller plus a separate companion controller, but the exact supported functions and firmware interface must be confirmed for each product design. A key design consideration is to validate signal routing and power sequencing against the complete datasheet before fabrication. Maintain short, continuous USB data paths, provide local high-frequency bypass capacitance at the supply pins, and keep return paths beneath the relevant signals. Do not assume that every device with the same 12 Mbps USB classification is a drop-in replacement; package, pinout, embedded-function behavior, and host compatibility must all match. This product page consolidates verified product identity, package information, lifecycle guidance, substitution limits, comparison fields, and practical USB interface design considerations. It is intended to help engineers identify whether the TUSB2140PAG fits an existing USB hub architecture and which technical checks are required before committing a board revision to production.

RFQ যোগাযোগ
TUSB214RWBR - USB 2.0 HS Signal Conditioner | Texas Instruments
TUSB214RWBR

TUSB214RWBR - USB 2.0 HS Signal Conditioner | Texas Instruments

Texas Instruments TUSB214RWBR is a USB 2.0 high-speed signal conditioner with DC boost and an integrated BC1.2 Charging Downstream Port controller. It supports USB 2.0, OTG 2.0, and BC1.2 operation, with low-, full-, and high-speed signaling across a 3 V to 3.6 V supply range. The device is packaged in a compact 12-pin X2QFN package measuring 1.6 mm by 1.6 mm. A USB signal conditioner is an interface IC that compensates for attenuation, distortion, and timing degradation introduced by connectors, cables, PCB traces, and other interconnect elements. Positioned within the broader USB interface hierarchy, it sits between a USB host or device controller and a physical USB connection. Its DC boost function helps maintain usable signal amplitude through lossy channels, while its integrated charging-port controller simplifies compliance with BC1.2 downstream-port requirements. The TUSB214 supports LS, FS, and HS signaling and provides selectable signal gain for high-loss applications. Its D1P/M and D2P/M inputs are interchangeable, allowing the same device-oriented layout to work in host or device applications. The device also supports daisy-chain operation, which can simplify cascading through multiple lossy cable or connector sections when a single conditioner is not sufficient. The BC1.2 charging function is configurable through a pin strap or I2C. This provides a practical choice between hardware-configured designs and firmware-controlled implementations. The TUSB214 additionally features very low USB disconnect and shutdown power consumption, making it suitable for power-conscious USB equipment where inactive-state leakage can influence battery life or system thermal performance. Typical applications include USB 2.0 peripheral connections, host-to-cable interfaces, device-to-cable interfaces, and systems that require an integrated downstream charging-port controller. It is particularly useful when PCB routing, connector transitions, or cable loss could degrade high-speed USB data. The 1.6 mm by 1.6 mm X2QFN footprint supports compact designs, although its fine pitch requires careful layout, assembly, and inspection practices. The principal design consideration is placement. The conditioner should be positioned near the loss or connector transition it is intended to correct, while its data traces should remain short, properly terminated, and routed away from noisy power or high-current paths. Designers should also confirm the configured BC1.2 mode, enable state, and signal-gain setting against the final system behavior. This product page combines the TUSB214 family characteristics with package-specific ordering information, application guidance, drop-in alternatives, and a practical comparison framework. It is intended to support component selection and board-level implementation decisions rather than simply repeat the basic catalog description.

RFQ যোগাযোগ
TUSB214RWBT - USB 2.0 Signal Conditioner | Texas Instruments
TUSB214RWBT

TUSB214RWBT - USB 2.0 Signal Conditioner | Texas Instruments

The Texas Instruments TUSB214RWBT is a USB 2.0 high-speed signal conditioner with a BC1.2 Charging Downstream Port controller, supplied in a 12-X2QFN package measuring 1.6 mm by 1.6 mm. Its primary functions are conditioning high-speed USB data signals and supporting USB battery-charging detection, allowing one compact interface IC to address signal integrity and charging-related system requirements. A USB 2.0 high-speed signal conditioner is an interface IC placed within a USB connection to improve signal transmission behavior. The TUSB214 belongs to the broader hierarchy of USB interface controllers, signal-processing interface ICs, interface ICs, and semiconductors. Its integrated BC1.2 CDP function adds downstream-port charging detection to the high-speed signal-conditioning role, while the manufacturer also identifies compatibility with USB On-The-Go and Battery Charging specifications. The principal feature is consolidation of high-speed USB signal conditioning and BC1.2 CDP detection in one device. The 1.6 mm by 1.6 mm 12-X2QFN package supports compact layouts in USB host, device, docking, and peripheral equipment. Its USB 2.0 high-speed orientation makes it applicable wherever a design uses high-speed USB data paths and requires the additional features of a charging downstream port. From an architectural perspective, the TUSB214 is not a general-purpose USB host controller or a power-path regulator. It is a dedicated signal-processing interface IC. BC1.2 detection identifies whether a connected charging source can supply current, while the signal-conditioning section supports reliable propagation of high-speed USB traffic. This division of responsibilities helps designers avoid assigning charging detection and signal conditioning to unrelated components when a single interface device can address both needs. Typical uses include USB docking stations, laptop peripherals, powered USB devices, multi-interface adapters, and embedded USB equipment. A docking station is a particularly suitable application because it must preserve high-speed data behavior while presenting a downstream charging interface to an attached portable device. The same combination can simplify systems that expose USB-A ports to source equipment while retaining a conditioned high-speed data connection. Layout remains critical because a high-speed signal conditioner must be placed where it can influence the intended USB data path. Follow the manufacturer pin configuration, recommended external components, and trace guidance in the TUSB214 datasheet. Confirm that the selected connector and cable arrangement support USB 2.0 high-speed operation, and validate charging behavior across the system input-current, voltage, and software-handshake requirements. This page combines the exact package and functional information, manufacturer datasheet link, application engineering guidance, lifecycle and compliance fields, and sourcing references. It also distinguishes direct drop-in interchangeability from merely similar USB interface ICs, helping engineers avoid selecting a replacement whose package, pinout, or charging behavior is not compatible.

RFQ যোগাযোগ
TUSB215RGYR - USB 2.0 HS Signal Conditioner | Texas Instruments
TUSB215RGYR

TUSB215RGYR - USB 2.0 HS Signal Conditioner | Texas Instruments

The Texas Instruments TUSB215RGYR is a USB 2.0 high-speed signal conditioner with DC boost, an integrated Charging Downstream Port, and VBUS supply capability. It operates from a 5 V supply, supports USB 2.0 high-speed signal conditioning, and is packaged in a 14-pin VQFN RGY package measuring 3.5 mm by 3.5 mm. The device is intended to compensate for channel-related signal loss and help improve USB electrical compliance. A USB high-speed signal conditioner is an interface IC placed within a USB differential data path. It belongs to the USB interface and signal-processing hierarchy, where conditioning components address attenuation, edge distortion, and signal integrity before data reaches a host, device, hub, or cable assembly. Unlike a protocol controller, the TUSB215 does not interpret USB transactions; it reshapes the physical-layer signal traveling across the differential pair. The principal features of the TUSB215 include USB 2.0 high-speed operation, DC boost capability, an integrated CDP function, VBUS supply support, and a 14-pin VQFN package. Its operating-temperature range is 0 °C to 70 °C. DC boost compensates for voltage loss encountered in a lossy channel, while the integrated charging function supports downstream-port behavior within compatible USB charging designs. Signal integrity is the central design consideration for this device. TI specifies a 90 Ω differential impedance target for the complete USB high-speed signal path and directs designers to follow high-speed routing guidelines. Differential traces should therefore be length matched, continuously referenced, and routed away from noise-producing or discontinuous structures. Placement close to the source of degradation can provide more effective compensation than placement near the far endpoint. Typical uses include USB 2.0 host-to-device links, hub connections, peripheral docking systems, cable assemblies, and test equipment that needs channel-loss compensation. The TUSB215 is also relevant to boards that require a CDP function within a compact interface subsystem. Designers must still validate the complete USB channel against applicable electrical compliance requirements because component insertion alone does not guarantee system compliance. Thermal and layout planning should begin with the exposed-pad VQFN footprint. Place the input, output, and bypass capacitors close to their associated pins, provide a continuous ground reference, and follow the manufacturer land pattern for exposed-pad soldering. The 3.5 mm by 3.5 mm package supports compact designs, but its small thermal area requires careful copper and return-path construction. This product page combines the device function, package information, application guidance, verified source links, and practical implementation considerations in one engineering-focused reference. It also identifies where electrical details require confirmation in the manufacturer datasheet before a PCB or compliance test is released.

RFQ যোগাযোগ