উপশ্রেণী

পণ্য (44,000+)

XC4VFX12-10FFG668C - 12,312-Cell Virtex-4 FX FPGA | AMD
XC4VFX12-10FFG668C

XC4VFX12-10FFG668C - 12,312-Cell Virtex-4 FX FPGA | AMD

The AMD Xilinx XC4VFX12-10FFG668C is a Virtex-4 FX field-programmable gate array with 12,312 programmable logic cells, 320 user I/O, and a maximum internal operating frequency of 1028 MHz. Built on 90 nm CMOS technology and supplied in a 668-pin FCBGA package, it combines programmable logic, block RAM, DSP resources, and selectable I/O standards in one reconfigurable semiconductor device. The -10 speed grade targets designs requiring a 1028 MHz internal clock, while the commercial temperature suffix C supports operation from 0°C to 85°C. A field-programmable gate array is a semiconductor whose digital logic is configured after manufacture. In the hierarchy of programmable devices, an FPGA sits above fixed-function logic and below a system-on-chip, combining configurable logic blocks, routing resources, memory, multipliers, and I/O. The XC4VFX12 belongs to the Virtex-4 FX family, which was designed for high-performance signal processing, networking, communications, industrial control, and embedded systems with substantial parallel processing requirements. The device provides 12,312 logic cells organized in 1,368 configurable logic blocks and includes 320 user I/O. Its 90 nm CMOS process supports operation with a 1.2 V core supply. These resources make the XC4VFX12 suitable for implementing parallel datapaths, protocol engines, image-processing pipelines, control logic, and mixed fixed-function/soft-processor systems within one package. The -10 designation identifies the device's speed grade, while FFG668C identifies the package, lead-free status, and commercial temperature grade. At the architecture level, the FPGA combines Configurable Logic Blocks with dedicated block RAM and DSP48 resources, allowing designers to map arithmetic and storage operations directly into silicon. Its reported 1028 MHz internal frequency describes the maximum internal clocking capability rather than the operating rate of every user interface. External interfaces still depend on selected I/O standards, board-level timing, pin constraints, and the clocking resources assigned in the implementation tools. Typical applications include telecommunications line-card control, industrial automation, radar and defense signal processing, medical imaging, video infrastructure, and embedded control platforms. In these systems, the XC4VFX12 can implement multiple parallel processing channels while supporting high-speed external data movement through its 320 I/O. It is also suitable for prototype development and legacy equipment refreshes where preserving an established Virtex-4 architecture reduces redesign risk. The principal design consideration is that this is a large, high-pin-count BGA device. PCB design must follow AMD's package and pinout files, provide dense power and ground distribution, and implement all required decoupling and controlled-impedance routing. Configuration storage, clocking, power sequencing, thermal performance, and legacy software-tool compatibility must also be planned before layout begins. This page consolidates the available device identification, package, speed-grade, temperature, and resource information into an engineering-focused reference. It also distinguishes documented ordering variants, explains the constraints affecting drop-in replacement, and highlights the design checks required for a reliable Virtex-4 FPGA implementation.

RFQ যোগাযোগ
XC4VFX12-10FFG668I - 12,312-Cell Virtex-4 FX FPGA | AMD
XC4VFX12-10FFG668I

XC4VFX12-10FFG668I - 12,312-Cell Virtex-4 FX FPGA | AMD

The AMD XC4VFX12-10FFG668I is a Virtex-4 FX field-programmable gate array with 12,312 logic cells, 320 user I/O, a maximum internal frequency of 1028 MHz, and a 668-pin FCBGA package. Built on 90 nm CMOS technology with a 1.2 V core supply, it combines programmable logic, block RAM, dedicated DSP processing resources, and high-speed serial connectivity in one device. The -10 speed grade targets designs requiring predictable performance without the power and timing headroom of the faster -11 and -12 grades. An FPGA is a semiconductor whose digital circuit is defined by a bitstream loaded into configurable logic and memory fabric. Within the broader hierarchy of programmable-logic devices, an FPGA sits above simple programmable arrays and mask-programmed devices because its interconnect, logic blocks, memory, and dedicated processors can be reprogrammed for many different functions. The Virtex-4 FX platform extends that architecture with DSP and networking-oriented resources for demanding embedded, communications, and signal-processing systems. Key device characteristics include 10,544 listed logic cells, 12,312 total cells, 320 I/O, 668 package pins, 90 nm CMOS construction, and an operating-temperature range of 0 °C to 85 °C for the commercial-grade listing. The device is marked Pb-free and is listed as RoHS compliant, which supports regulated production and end-of-life equipment procurement where environmental conformance is required. The -10 designation identifies the speed grade rather than a change to the physical package or core architecture. Within the same 668-pin family, -11 and -12 devices provide higher speed options, while the C suffix identifies commercial temperature variants. Because these options change timing or temperature classes rather than the board footprint, they support controlled migration when a design requires additional timing margin or a broader temperature specification. Typical uses include telecommunications and network equipment, industrial control, test and measurement, video and image processing, defense-oriented communications, and embedded systems requiring parallel logic, block RAM, DSP, and serial transceiver resources. An FPGA implementation can consolidate multiple fixed-function devices into one programmable platform while retaining field-updatable behavior. The principal design constraint is power and thermal planning around the 1.2 V core supply. Board designers should follow the AMD power, decoupling, and pinout guidance for this package and preserve adequate copper and via connectivity around the device. Because the 668-pin FCBGA has a dense escape-routing requirement, layer count, via-in-pad practice, and assembly capability should be confirmed before layout begins. This page combines the device specifications, package details, lifecycle information, qualified same-package migration options, and application guidance engineers need when evaluating the XC4VFX12-10FFG668I for an existing Virtex-4 design.

RFQ যোগাযোগ
XC4VFX12-10SF363I - Virtex-4 FX 12,312-Cell FPGA | AMD
XC4VFX12-10SF363I

XC4VFX12-10SF363I - Virtex-4 FX 12,312-Cell FPGA | AMD

AMD XC4VFX12-10SF363I is a Virtex-4 FX field-programmable gate array with 12,312 programmable logic cells, 240 user I/Os, a -10 speed grade, and a 363-pin FCBGA package. It is designed for industrial embedded systems that combine programmable logic, DSP processing, serial connectivity, and embedded PowerPC processing in one device. A field-programmable gate array is a programmable digital semiconductor whose interconnected logic, memory, DSP, and I/O resources can be configured after manufacture. The XC4VFX12 belongs to the Virtex-4 FX hierarchy: FPGA, Virtex-4 generation, FX platform, programmable logic device, and semiconductor. It is intended for applications requiring more logic and specialized processing than entry-level FPGAs while retaining a single integrated device. Key characteristics include 10,544 logic cells or logic blocks, 12,312 total cells, 663,552 configuration bits, 240 user I/Os, 90 nm CMOS construction, and a stated internal frequency of 1028 MHz. The -10 speed designation identifies the device's performance grade. Its 363-pin FCBGA package supports dense board layouts, although careful via, escape-routing, thermal, and signal-integrity planning is required. The Virtex-4 FX architecture integrates programmable logic with dedicated DSP resources, high-speed serial transceivers, block RAM, and embedded PowerPC processors. This combination allows designers to consolidate control logic, digital signal processing, network interfaces, and processor-based functions instead of implementing them across several discrete components. The 90 nm process also provides a meaningful density improvement over earlier FPGA generations while supporting a broad range of industrial embedded designs. Typical applications include industrial control and automation, telecommunications equipment, networking infrastructure, test and measurement systems, embedded video processing, and industrial networking. The 240 I/O count is useful for parallel control and data interfaces, while the integrated DSP and serial capabilities support filtering, protocol handling, data acquisition, and communications functions. The primary design constraint is board implementation around the 363-pin FCBGA. Use the manufacturer's package pinout and PCB escape-routing guidance, provide the required supply rails and decoupling, and validate high-speed serial routing against the relevant device specifications. Reuse of an existing design requires exact pin, package, speed-grade, voltage, and configuration compatibility checks. This page consolidates the device's documented logic capacity, I/O count, process technology, package information, lifecycle position, replacement constraints, and practical implementation considerations. It also distinguishes true same-footprint alternatives from newer devices that may require a different package, logic configuration, or PCB redesign.

RFQ যোগাযোগ
XC4VFX12-10SFG363C - Virtex-4 FX FPGA | AMD
XC4VFX12-10SFG363C

XC4VFX12-10SFG363C - Virtex-4 FX FPGA | AMD

The AMD XC4VFX12-10SFG363C is a Virtex-4 FX field-programmable gate array with 12,312 programmable logic cells, 1368 configurable logic blocks, and 240 user I/O in a 363-pin FCBGA package. The device uses 90 nm CMOS technology, operates from a 1.2 V core supply, and provides a listed internal frequency of 1028 MHz for the -10 speed grade. A field-programmable gate array is a programmable logic semiconductor whose digital functions are defined through a configuration bitstream rather than fixed circuit wiring. Within the device hierarchy, this Virtex-4 FX device belongs to the FPGA and CPLD category of programmable-logic semiconductors. Its large logic capacity, high pin count, and embedded processing resources support designs requiring parallel data processing, specialized interfaces, and flexible hardware adaptation. Key features include 12,312 logic cells, 1368 configurable logic blocks, 240 user I/O, and a 363-ball FCBGA package. The -10 designation identifies the device speed grade, while the commercial-temperature ordering code uses the C suffix. According to the Xilinx datasheet, the operating temperature range is 0°C to 85°C. The device is also identified as lead-free in component listings. The 90 nm CMOS implementation places this device in AMD/Xilinx's established Virtex-4 generation. Its architecture combines programmable logic, block RAM, DSP-oriented arithmetic resources, and dedicated I/O capabilities. The 1028 MHz internal-frequency listing describes a headline device characteristic rather than a guarantee that every user interface or design will operate at that rate; practical performance depends on timing closure, resource utilization, clocking, I/O standards, and the selected design. Typical applications include telecommunications and 5G infrastructure, industrial automation, medical imaging, aerospace and defense systems, test equipment, and research platforms. Its 240 I/O and high logic-cell count are useful for parallel datapaths and multi-channel control systems, while the large 363-contact package supports extensive power, ground, configuration, clock, and user-I/O connections. PCB implementation requires careful power-plane distribution, decoupling, and ball-layout planning for the FCBGA package. Designers should use the manufacturer pinout and package information when assigning power, ground, configuration pins, and differential I/O. Signal-integrity analysis and appropriate multilayer stack-up are important because high-speed interfaces can be affected by return paths, supply noise, and skew between external devices. This product page combines exact ordering information, package and logic characteristics, supported drop-in alternatives, comparison parameters, and practical implementation guidance. It is intended to accelerate engineering review, sourcing, PCB planning, and legacy-design maintenance for the XC4VFX12-10SFG363C.

RFQ যোগাযোগ
XC4VFX12-10SFG363I - 12,312-Cell Virtex-4 FX FPGA | AMD
XC4VFX12-10SFG363I

XC4VFX12-10SFG363I - 12,312-Cell Virtex-4 FX FPGA | AMD

The AMD XC4VFX12-10SFG363I is a Virtex-4 FX field-programmable gate array with 12,312 logic cells, 10,544 logic blocks, 240 user I/O, a 1.2 V core supply, and a 363-pin FCBGA package. Its 90 nm CMOS construction and -10 speed grade support established Virtex-4 designs requiring configurable logic, parallel processing, block RAM, and dedicated hard resources. An FPGA is a programmable digital logic device in the broader semiconductor hierarchy. Unlike a fixed-function application-specific integrated circuit, an FPGA combines configurable logic blocks, programmable interconnect, input/output blocks, embedded memory, and specialized hard cores. The XC4VFX12 belongs to the Virtex-4 FX family and provides a balance of logic density, I/O availability, and programmable architecture for industrial controls, communications equipment, signal processing, and embedded systems that were designed around the Virtex-4 ecosystem. The -10 designation identifies the device speed grade within the Virtex-4 family. The SFG363 package designation identifies the 363-pin fine-pitch BGA configuration, while the trailing I denotes the industrial-temperature ordering option. The listed device provides 240 user I/O and operates from a 1.2 V core supply. Its 1,028 MHz internal-frequency figure and 12,312-cell capacity make it suitable for parallel datapaths, protocol handling, embedded control, and DSP-style processing when paired with suitable external memories and clocking. The 90 nm CMOS process gives the Virtex-4 FX architecture a mature, electrically stable implementation that remains practical in legacy and long-lifecycle equipment. Programmable logic and routing allow the same FPGA family to support multiple control, communication, and arithmetic functions. Hardware resources such as block RAM and dedicated input/output structures reduce the amount of external logic needed, while selectable I/O standards support connections to industry-standard buses and external converters. Typical applications include industrial automation, network-interface equipment, video and image pipelines, telecommunications, test instrumentation, and embedded control systems. The 240-I/O count is particularly useful for designs requiring substantial external connectivity, while 12,312 logic cells permit concurrent datapath and control functions. The 363-pin FCBGA also demands careful PCB construction, including multilayer routing, controlled-impedance design, and component-height planning around the large BGA footprint. For a new Virtex-4 implementation, preserve the established power, decoupling, clock, JTAG, configuration, and memory interfaces from the original design. Because the package has a dense ball grid and fine pitch, inspect the manufacturer package drawing and pinout before fabrication. Configuration memory, bus-width compatibility, I/O voltage constraints, and bitstream compatibility should be checked rather than assuming that a similarly named device is interchangeable. This page organizes the principal device characteristics, verified technical references, package information, application guidance, and qualified family alternatives into one engineering-focused resource. The comparison tables and design notes emphasize the decisions that matter when maintaining or redesigning a Virtex-4 FX board, including speed grade, package, temperature range, I/O availability, and configuration compatibility.

RFQ যোগাযোগ
XC4VFX12-11FFG668C - Virtex-4 FX FPGA | AMD
XC4VFX12-11FFG668C

XC4VFX12-11FFG668C - Virtex-4 FX FPGA | AMD

AMD XC4VFX12-11FFG668C is a Virtex-4 FX field-programmable gate array built on 90 nm CMOS technology, with 12,312 programmable cells, 320 user I/Os and a 1.2 V internal supply in a 668-pin FCBGA package. It combines programmable logic, block RAM, DSP resources and dedicated hard processors in a single device, making it suitable for demanding embedded, communications and signal-processing systems. A field-programmable gate array, or FPGA, is a semiconductor whose digital logic is configured after manufacture. The FPGA hierarchy extends from individual programmable logic cells through configurable logic blocks, block RAM and DSP resources to a complete programmable logic device. Compared with a fixed-function ASIC, an FPGA allows designers to revise hardware behavior, integrate multiple functions on one package and shorten development cycles. The XC4VFX12 contains 12,312 cells and 10,544 logic cells according to the device listing, with 1,368 configurable logic blocks identified in the component catalog. Its 320 user I/Os support communication among external memory, network transceivers, converters and custom interfaces. A reported internal frequency of 1,028 MHz describes a significant internal timing resource, while the -11 speed grade identifies its performance class within the Virtex-4 family. The Virtex-4 FX architecture integrates programmable logic with DSP processing capability and a PowerPC-based embedded processor subsystem. This combination allows control logic, arithmetic pipelines, memory interfaces and protocol functions to be implemented in one FPGA rather than across several discrete devices. It also supports parallel processing for applications such as image acquisition, communications infrastructure, industrial control and high-throughput data conversion. Typical applications include telecom line-card and baseband processing, radar and signal-analysis equipment, industrial vision, medical imaging, test and measurement systems, and high-speed network appliances. The 668-pin FCBGA package provides many physical connections for external memories and differential interfaces, but it also requires careful power delivery, decoupling, via-in-pad strategy and thermal planning on a dense multilayer PCB. Designers should use the AMD Virtex-4 package pinout files when assigning every power, ground, configuration and user-I/O connection. Because this is a large legacy BGA, differential-pair routing, layer transitions and exposed-pad heat removal require much more PCB discipline than a small leaded package. Configuration memory, bus-width adaptation, decoupling and auxiliary supply sequencing must be reviewed against the manufacturer documentation before layout release. This page combines device-level specifications, documented same-footprint alternatives, practical PCB guidance and engineering selection criteria. It is intended to help teams distinguish speed-grade, temperature-grade and package differences while preserving compatibility with existing Virtex-4 FX designs.

RFQ যোগাযোগ
XC4VFX12-11FFG668I - 320-I/O Virtex-4 FX FPGA | AMD
XC4VFX12-11FFG668I

XC4VFX12-11FFG668I - 320-I/O Virtex-4 FX FPGA | AMD

AMD XC4VFX12-11FFG668I is a Virtex-4 FX field-programmable gate array with 12,312 programmable logic cells, 320 I/O positions, and a 668-pin FCBGA package. The device uses 90 nm fabrication technology and a 1.2 V core supply, combining configurable logic, block RAM, DSP resources, and selectable I/O standards in one programmable-logic device. A field-programmable gate array, or FPGA, is a semiconductor whose logic blocks, interconnect, and I/O can be configured after manufacture. An FPGA belongs to the programmable-logic hierarchy, which includes CPLDs and ASIC alternatives. Compared with a fixed-function ASIC, the XC4VFX12 family allows designers to implement parallel processing, signal generation, protocol handling, and control functions in reprogrammable hardware while reducing the logic count required across separate devices. The principal device attributes are 12,312 logic cells, 320 I/O, 90 nm process technology, and a 1.2 V operating core voltage. The -11 speed designation identifies its performance grade within the XC4VFX12 ordering system. The FFG668 package provides a dense, board-level surface-mount option for systems requiring extensive programmable logic and high I/O connectivity. Its large 668-ball footprint demands careful ball-grid-array layout, power-plane design, and thermal analysis. Technically, the Virtex-4 FX architecture supports configurable logic resources alongside dedicated DSP and memory functions, allowing multiple data-processing paths to operate in parallel. This mixed-resource architecture is useful when a design combines control logic, high-throughput arithmetic, and external data acquisition without implementing those functions in separate physical devices. System-level performance depends on the selected bitstream, clocking architecture, memory interfaces, I/O standards, and routing congestion. Typical uses include telecommunications and networking equipment, industrial control, test and measurement, embedded signal processing, aerospace and defense systems, and high-speed data acquisition. The 320-I/O interface is particularly useful for parallel buses, memory interfaces, clock distribution, and multiple high-speed serial links when their supported I/O standards match the device configuration. Designers should verify the exact pin assignments, differential-pair routing, supply requirements, decoupling, and exposed thermal requirements in the AMD/Xilinx Virtex-4 package and device documentation. The 668-ball footprint also requires high-layer-count PCB construction and assembly capability, making mechanical compatibility, via-in-pad strategy, and solder-reflow profile central to a reliable implementation. This product page consolidates the device identity, exact ordering variants, package information, drop-in alternatives, comparison parameters, and implementation guidance into a focused engineering reference. It distinguishes true package-compatible alternatives from broader Virtex-4 capacity choices and highlights the design constraints that matter when planning a dense BGA board.

RFQ যোগাযোগ
XC4VFX12-11SF363I - 12,312-Cell Industrial FPGA | AMD
XC4VFX12-11SF363I

XC4VFX12-11SF363I - 12,312-Cell Industrial FPGA | AMD

The AMD XC4VFX12-11SF363I is a Virtex-4 FX field-programmable gate array with 12,312 logic cells, a maximum operating frequency of 1181 MHz, and 240 input and 240 output terminals. The device is packaged in a 363-terminal, square, fine-pitch, 0.800 mm pitch S-PBGA-B363 surface-mount package and is manufactured using CMOS technology. Its -11 speed grade and industrial temperature designation position it for performance-oriented embedded systems requiring substantial parallel programmable logic. A field-programmable gate array is a semiconductor whose digital logic, interconnect, and configurable I/O resources can be programmed after fabrication. An FPGA belongs to the programmable-logic hierarchy above ASICs and microcontrollers, providing parallel hardware execution without the mask-production cost of a custom ASIC. Virtex-4 FX devices combine configurable logic, dedicated processing resources, block RAM, digital signal processing blocks, high-speed serial connectivity, and selectable I/O standards within one integrated device. The XC4VFX12-11SF363I provides 12,312 logic cells for datapath, control, protocol, and image-processing designs. Its 240 inputs and 240 outputs support substantial external connectivity, while the 363-ball package permits dense routing among power, ground, configuration, and user I/O. The Virtex-4 family supports -12, -11, and -10 speed grades, with -12 designated as the highest-performance grade and -11 providing the performance represented by this MPN. The device uses the Advanced Silicon Modular Block architecture and 90 nm CMOS fabrication to combine configurable logic with dedicated hardware resources. This architecture allows multiple independent processing tasks to execute concurrently rather than relying on sequential instruction execution. Selection logic embedded in the fabric supports routing flexibility, while dedicated block RAM and DSP resources can accelerate data-intensive pipelines when the design maps them appropriately. Typical applications include telecommunications and networking infrastructure, industrial automation, high-speed data acquisition, broadcast video processing, instrumentation, and embedded signal-processing systems. The large I/O count is particularly useful for parallel ADC or DAC interfaces, digital buses, and custom accelerator fabrics. Existing Virtex-4 designs can preserve the same package footprint when moving between qualified speed, temperature, or device-suffix options, subject to timing and power verification. A critical design consideration is that a BGA PCB must be designed for fine-pitch assembly, clean power distribution, controlled impedance routing, and careful via-in-pad or through-via escape patterns. Designers should also confirm pin compatibility, configuration requirements, memory-device interfaces, and timing closure before replacing one XC4VFX12 suffix with another. This page combines package, logic-resource, drop-in-alternative, and implementation guidance for faster engineering review.

RFQ যোগাযোগ
XC4VFX12-11SFG363C - Virtex-4 FX 12,312-Cell FPGA | AMD
XC4VFX12-11SFG363C

XC4VFX12-11SFG363C - Virtex-4 FX 12,312-Cell FPGA | AMD

The AMD XC4VFX12-11SFG363C is a Virtex-4 FX field-programmable gate array with 12,312 programmable cells, 240 I/O, and a 363-pin FCBGA package. It combines 1,368 configurable logic blocks, 1181 MHz internal performance, 81 kB of block RAM, and CMOS implementation on 90 nm silicon. The -11 speed grade targets the middle performance class of the Virtex-4 FX family, while the C suffix identifies the commercial temperature grade. Its 1.2 V core supply and lead-free construction suit established embedded, communications, industrial-control, and test-equipment platforms. A field-programmable gate array is a semiconductor whose digital logic, interconnects, and I/O behavior are configured after manufacture. Within the product hierarchy, an FPGA belongs to programmable logic devices and combines configurable logic blocks with embedded memory, dedicated I/O, clocking, and specialized fabric resources. This makes an FPGA substantially more flexible than a fixed-function application-specific integrated circuit while providing greater parallelism than a conventional software-driven processor. The XC4VFX12-11SFG363C offers 12,312 cells, 1,368 configurable logic blocks, 240 I/O, and 81 kB of block RAM. Its listed internal frequency of 1181 MHz provides a useful performance-class reference, although realized system performance depends on the selected clock, logic design, memory architecture, I/O standards, and timing constraints. The 363-contact FCBGA supports a dense mix of user I/O and dedicated power, ground, configuration, clock, and auxiliary resources. Technically, the device belongs to the Virtex-4 FX generation and uses 90 nm CMOS technology. This architecture provides programmable logic, dedicated block RAM, programmable I/O, and on-chip resources suitable for parallel data processing. Because the part is mature and no longer in current production, engineers should treat it primarily as a supported-for-legacy-design component and validate tooling, bitstream, and supply continuity against their program requirements before committing a new production release. Typical uses include industrial control and automation, communications infrastructure, instrumentation, embedded signal processing, and legacy aerospace or defense equipment where an established Virtex-4 design and exact package compatibility are priorities. The FPGA can implement parallel datapaths, protocol interfaces, state machines, and memory-intensive control logic while avoiding the overhead of a general-purpose processor in tightly timed applications. The primary engineering consideration is package continuity. Use the AMD Virtex-4 package pinout files when assigning PCB lands, and treat the 363-ball FCBGA as a fine-pitch, complex BGA requiring appropriate PCB design rules, assembly process control, and thermal analysis. Validate the selected I/O voltage domains, configuration interface, decoupling, clocking, and power sequencing before schematic release. This product page organizes the device identity, verified technical attributes, lifecycle considerations, same-footprint alternatives, application guidance, and design cautions into a concise engineering reference. It also separates confirmed device characteristics from parameters that require the manufacturer datasheet or a hardware design review.

RFQ যোগাযোগ
XC4VFX12-11SFG363I - 12,312-Cell -11 Virtex-4 FX FPGA | AMD
XC4VFX12-11SFG363I

XC4VFX12-11SFG363I - 12,312-Cell -11 Virtex-4 FX FPGA | AMD

The AMD Xilinx XC4VFX12-11SFG363I is a Virtex-4 FX field-programmable gate array built for high-performance parallel processing, programmable signal processing, and interface-intensive embedded systems. The device contains 12,312 logic elements, 240 user I/O, 32 DSP slices, and 648 Kb of block RAM. It is supplied in a 363-ball FCBGA package as a -11 industrial-temperature speed grade. According to the device listings, its internal clock frequency is 1028 MHz and its junction-temperature range is -40°C to 100°C. A field-programmable gate array is a semiconductor whose digital logic, interconnect, and signal-processing resources can be configured after fabrication. Within the product hierarchy, an FPGA is a programmable-logic device and an application-specific integrated circuit. The Virtex-4 FX family combines configurable logic blocks, block RAM, dedicated digital signal processing slices, and high-speed I/O in one device, allowing designers to implement multiple control, arithmetic, networking, and data-movement functions without constructing them from discrete logic devices. The XC4VFX12-11SFG363I's principal resources include 10,544 logic cells or logic blocks, 12,312 logic elements, 240 I/O, 32 DSP slices, and 648 Kb of block RAM. Its -11 speed designation places it between the -12 performance grade and the -10 grade in the Virtex-4 family. The 363-ball FCBGA package supports dense board layouts, while the exposed-ball format requires careful escape-routing, via assignment, solder-mask design, and thermal management. The industrial-temperature grade supports deployments where ambient and board temperatures can exceed commercial conditions. This device is particularly useful when a design requires deterministic parallel datapaths rather than sequential processor execution. DSP slices can accelerate filtering, correlation, transforms, and fixed-point arithmetic, while block RAM stores lookup tables, packet buffers, and waveform data. Distributed and programmable interconnect allow multiple clock domains, pipelined interfaces, and hardware protocol handling. The 240 I/O provide external connectivity for data capture, control signals, memory interfaces, clocks, and high-speed serial links implemented with appropriate board-level transceivers. Typical implementations include telecommunications line cards, industrial automation controllers, medical imaging equipment, radar and signal-processing modules, video-processing platforms, and research systems requiring programmable hardware acceleration. In a communication system, parallel datapaths can process multiple channels concurrently. In industrial equipment, programmable logic can implement real-time control, monitoring, and safety interfaces while retaining field-update flexibility. The primary design trade-off is that a complex BGA device requires careful PCB engineering. Engineers should follow the AMD/Xilinx package, pinout, power, decoupling, and configuration guidance, provide all specified supply rails, and plan thermal paths through the PCB and enclosure. Configuration storage, startup sequencing, clocking, and JTAG diagnostics should be designed alongside the programmable logic rather than added after functional logic is complete. This product page combines the exact device identity, package and resource details, lifecycle information, practical design considerations, structured comparisons, and confirmed same-family alternatives. It also distinguishes true same-footprint options from broader Virtex-4 devices that may require a board redesign, helping engineers evaluate replacement risk before committing a layout.

RFQ যোগাযোগ
XC4VFX20-10FF672C - 19,224 Logic Cell Virtex-4 FX FPGA | AMD
XC4VFX20-10FF672C

XC4VFX20-10FF672C - 19,224 Logic Cell Virtex-4 FX FPGA | AMD

AMD XC4VFX20-10FF672C is a Virtex-4 FX field-programmable gate array with 19,224 logic cells, 2,136 configurable logic blocks, 320 user I/O, and a 672-ball FCBGA package. It uses CMOS silicon and a nominal 1.2 V core supply, operates across 0°C to 85°C in the commercial grade, and belongs to the -10 speed grade. A field-programmable gate array is a semiconductor whose logic, interconnect, and digital signal-processing resources are configured after manufacture. The FPGA hierarchy places this device in the Virtex-4 FX family, where it combines programmable logic blocks with dedicated DSP resources, general-purpose I/O, embedded memory, and clock-management circuitry. This makes the XC4VFX20 suitable when designers need parallel programmable logic and high-speed fixed-function processing on one device. The principal device figures include 19,224 logic cells, 2,136 configurable logic blocks, 320 I/O, 1,028 MHz internal frequency, and a 1.2 V nominal supply. The 672-ball FCBGA package provides a high-density connection interface for designs requiring substantial external memory, parallel buses, high-speed transceivers, or multiple expansion interfaces. Its -10 suffix identifies the speed grade, while the commercial temperature range supports industrial-room-temperature laboratory, instrumentation, communications, and embedded-control systems. The Virtex-4 architecture is implemented in 90 nm CMOS and uses Xilinx ASMBL architecture. Programmable logic can implement state machines, protocol controllers, arithmetic logic, and interface control, while DSP blocks accelerate filtering, correlation, waveform generation, and fixed-point signal-processing tasks. Designers should distinguish the reported 1,028 MHz internal frequency from the operating frequency available at every I/O or logic path; external timing depends on clock topology, pin location, routing, I/O standards, and design constraints. Typical uses include industrial automation, test and measurement, communications infrastructure, embedded video processing, radar or signal-processing front ends, and high-speed interface aggregation. The large I/O count is particularly useful for parallel ADC and DAC interfaces, memory buses, network packet processing, and custom accelerator boards. A complete design also requires an FPGA configuration memory, compliant power rails, decoupling, clock routing, and a board-level thermal assessment. For PCB implementation, use the AMD Virtex-4 package pinout files when assigning every one of the 672 package balls. Place decoupling and configuration components close to their associated supply pins, maintain the required ball-pad geometry, and follow the manufacturer's high-speed layout rules for clocks, differential pairs, and power distribution. Validate the final schematic, pin constraints, and configuration interface before fabrication. This page combines the core Virtex-4 device specifications, ordering-code differences, practical application guidance, and drop-in comparison points to support faster engineering selection. The manufacturer family documentation and package pinout resources remain the controlling references for board design and device configuration.

RFQ যোগাযোগ
XC4VFX20-10FF672I - 19,224-Cell 1.2V Virtex-4 FX FPGA | AMD
XC4VFX20-10FF672I

XC4VFX20-10FF672I - 19,224-Cell 1.2V Virtex-4 FX FPGA | AMD

AMD XC4VFX20-10FF672I is a Virtex-4 FX field-programmable gate array with 19,224 logic cells, a maximum internal clock frequency of 1028 MHz, and a 1.2 V core supply in a 672-ball FCBGA package. The device provides 3,136 embedded memory bits, 320 DSP slices, and 236 user I/O, making it suitable for demanding parallel-processing, signal-processing, networking, and industrial control systems built around the Virtex-4 FX architecture. A field-programmable gate array is a programmable digital semiconductor whose logic fabric, interconnect, dedicated processors, memory blocks, and input/output resources can be configured after manufacture. Within the product hierarchy, the XC4VFX20 belongs to the Virtex-4 FX FPGA family and uses CMOS technology. Its combination of configurable logic, DSP resources, high-speed interfaces, and parallel I/O allows one package to implement multiple fixed-function subsystems while reducing external component count. Key device characteristics include 2,136 configurable logic blocks, 19,224 logic cells, 320 DSP slices, 236 user I/O, and a 1.00 mm ball pitch. The “-10” designation identifies the device speed grade, while the “FF672I” ordering code identifies the 672-ball package and industrial temperature option. The zero-to-85 °C operating-temperature range supports industrial equipment where ambient conditions exceed ordinary commercial limits. The 90 nm CMOS implementation provides a balance between logic density, power efficiency, and operating performance. Dedicated DSP slices accelerate multiply-accumulate operations commonly required in digital filtering, communications, and control systems. Distributed and block RAM resources allow data pipelines to be implemented inside the FPGA, while 236 user I/O support external memory, clocks, data buses, and peripheral interfaces. Typical applications include industrial automation, telecommunications infrastructure, video and image processing, instrumentation, aerospace and defense systems, and embedded control platforms. The 1.2 V core supply, 19,224 available logic cells, and 320 DSP slices allow substantial parallel pipelines to be consolidated into a single programmable device rather than implemented across numerous fixed-function components. PCB design must account for the large 27 mm by 27 mm FCBGA package, 1.00 mm ball pitch, multiple supply rails, high-speed differential I/O, and thermal management requirements. Decoupling, controlled-return routing, ball-map verification, and a multilayer PCB stack-up are essential for reliable operation. FPGA configuration should also include defined startup behavior, clocking, JTAG access, and appropriate I/O constraints. This page combines exact device specifications, package information, comparison details, and practical implementation guidance. It also distinguishes documented drop-in ordering variants from redesign-level alternatives so engineers can assess mechanical, thermal, timing, and configuration compatibility before approving a replacement.

RFQ যোগাযোগ
XC4VFX20-10FFG672C - 19,224-Cell -10 Virtex-4 FX FPGA | AMD/Xilinx
XC4VFX20-10FFG672C

XC4VFX20-10FFG672C - 19,224-Cell -10 Virtex-4 FX FPGA | AMD/Xilinx

The AMD/Xilinx XC4VFX20-10FFG672C is a Virtex-4 FX field-programmable gate array with 19,224 logic cells, a -10 speed grade, and a 672-pin FCBGA package. It operates from a 1.14 V to 1.26 V internal supply range and is specified for an industrial temperature range of 0°C to 85°C. The device belongs to the FPGA and CPLD category, combining programmable logic, block RAM, DSP resources, and configurable I/O in one CMOS device. A field-programmable gate array is a programmable-logic semiconductor whose configuration memory defines the digital circuit implemented after fabrication. Within the semiconductor hierarchy, an FPGA contains configurable logic blocks and dedicated resources rather than a fixed application-specific circuit. The Virtex-4 FX family uses Advanced Silicon Modular Block architecture, providing a platform for parallel processing, signal processing, communications, and embedded control designs. The XC4VFX20-10FFG672C provides 2,136 logic cells, 320 I/O, 19,224 total logic cells, and an internal frequency listed as 1028 MHz. Its -10 speed designation identifies one of the Virtex-4 performance grades, while its CMOS implementation supports integration of high-density programmable logic. The 672-pin FCBGA package provides the interconnect capacity required for a large I/O count and permits compact placement on multilayer printed circuit boards. Configuration and programming distinguish this device from fixed-function logic. A complete design is loaded into the FPGA through its configuration interface, after which the programmable logic blocks and dedicated resources implement the required function. Designers must preserve the power sequencing, configuration, and decoupling requirements defined in the Virtex-4 family documentation. The 1.14 V to 1.26 V supply specification should not be interpreted as permitting operation of all external I/O rails without consulting the package-specific pin and power requirements. Typical applications include digital signal processing, communications infrastructure, industrial control, test and measurement, image and video processing, and network equipment. The large logic-cell count is useful when a design combines multiple parallel pipelines, while the dedicated DSP and memory architecture can reduce external-component requirements in suitable designs. The 320-I/O configuration is particularly valuable for high-speed interfaces and systems requiring substantial parallel connectivity. For a new PCB, use the AMD Virtex-4 package pinout files to assign every ball and power rail correctly, and follow the family datasheet's decoupling and configuration guidance. For a replacement, verify the exact device identifier, speed grade, temperature grade, package, and programmed configuration before substituting any electrically similar part. This product page consolidates the verified device identity, package details, temperature and supply specifications, sourcing options, and engineering guidance. It also distinguishes exact drop-in candidates from newer FPGA families that require different packages, footprints, tools, or board-level redesign.

RFQ যোগাযোগ
XC4VFX20-10FFG672I - 19,224-Cell Virtex-4 FX FPGA | AMD
XC4VFX20-10FFG672I

XC4VFX20-10FFG672I - 19,224-Cell Virtex-4 FX FPGA | AMD

The AMD/Xilinx XC4VFX20-10FFG672I is a Virtex-4 FX field-programmable gate array with 19,224 logic cells, 320 user I/O, 1,253,376 RAM bits, and a -10 speed grade, housed in a 672-pin FCBGA package measuring 27 x 27 mm. The device combines programmable logic, block RAM, digital signal processing resources, and dedicated hard processors for embedded control and high-speed signal-processing systems. An FPGA is a semiconductor whose digital logic, interconnect, and memory blocks are configured after manufacture. Within the product hierarchy, a field-programmable gate array belongs to programmable logic devices and sits above basic logic cells while providing system integration through programmable I/O, embedded processors, DSP blocks, and dedicated memory. The Virtex-4 FX architecture combines these resources on one CMOS device for parallel processing, protocol bridging, control, and signal conditioning. Principal resources include 2,136 logic blocks, 19,224 logic cells, 320 I/O, and 1,253,376 RAM bits. The part is manufactured in a 90 nm CMOS process and operates from a 1.2 V core supply. The -10 designation identifies its performance grade, while the I suffix identifies the industrial-temperature option. The reported junction-temperature range for the G672I version is -40°C to +100°C. The architecture supports parallel datapaths instead of executing instructions sequentially, making it suitable where throughput, deterministic latency, or multiple simultaneous interfaces matter. Its 19,224-cell resource count is substantially larger than a small microcontroller, while its 320 I/O positions allow extensive connection to external memories, transceivers, converters, clocks, and application-specific interfaces. Embedded block RAM reduces external-memory traffic when the working set fits the available RAM. Typical uses include industrial control and automation, telecommunications and network-interface equipment, video processing, instrumentation, test systems, and embedded signal-processing platforms. The large FCBGA package provides extensive I/O capacity but requires a fine-pitch PCB layout with careful power distribution, decoupling, thermal management, and high-speed routing discipline. Designers should verify the complete pin list, supported I/O standards, configuration interface, clock requirements, supply sequencing, and exposed thermal behavior against the manufacturer datasheet before layout release. Board-level signal integrity and FPGA timing closure are particularly important when the device drives memory, clocks, or high-speed serial interfaces through a 672-pin package. This page combines the device’s core logic, memory, I/O, package, temperature-grade, and lifecycle information with practical replacement guidance, comparison criteria, and design notes. It focuses on engineering decisions engineers must make when integrating this large Virtex-4 FX FPGA into a constrained, multi-rail, high-pin-count system.

RFQ যোগাযোগ
XC4VFX20-11FF672C - Virtex-4 FX FPGA, 19,224 Cells, 672-BBGA | AMD/Xilinx
XC4VFX20-11FF672C

XC4VFX20-11FF672C - Virtex-4 FX FPGA, 19,224 Cells, 672-BBGA | AMD/Xilinx

The AMD/Xilinx XC4VFX20-11FF672C is a Virtex-4 FX field-programmable gate array with 19,224 total cells, 2,136 logic cells or logic blocks, and a 1,028 MHz internal frequency, packaged in a 672-pin FCBGA. It is manufactured on 90 nm CMOS technology with a 1.2 V core supply and is specified for a 0°C to 85°C operating-temperature range. The -11 suffix identifies the middle Virtex-4 performance grade, positioned between the -12 and -10 speed grades. An FPGA is a programmable digital logic device that allows a system designer to implement combinational and sequential logic, interfaces, processing pipelines, and control functions in a single integrated circuit. Within the semiconductor hierarchy, the XC4VFX20 belongs to the Virtex-4 FX FPGA family, which combines configurable logic resources with large-routing capability for demanding embedded systems. Unlike a fixed-function application-specific integrated circuit, an FPGA allows design changes to be implemented through bitstream programming. Key device attributes include a 320-resource embedded processing-related count shown in the product listing, 1,253,376 in the same listing, and a 672-ball package offering high I/O connectivity. The device supports the -12, -11, and -10 speed grades, with the -12 grade designated for the highest performance. Its CMOS construction and 90 nm process node reflect the technology generation of the Virtex-4 portfolio, while the large FCBGA package supports the substantial interconnect and power requirements of the device. The 672-pin FCBGA footprint requires a multi-layer PCB with dense escape routing and careful power-plane construction. Designers should use the AMD Virtex-4 package pinout files when assigning PCB signals, and should treat power, ground, decoupling, and configuration pins according to the package-specific guidance in the Virtex-4 family documentation. The package provides substantially more interconnect capacity than a leaded package, but it also raises sensitivity to assembly workmanship, solder-paste control, and thermal gradients. Typical applications include telecommunications equipment, industrial control systems, high-speed data processing, network-interface equipment, test and measurement platforms, and embedded control or signal-processing subsystems. In these systems, the device can implement parallel datapaths, protocol interfaces, timing control, and application-specific processing while reducing the number of discrete logic components. When planning a design, verify the selected -11 speed grade against the required internal and I/O timing, confirm that every power rail meets the DC and AC requirements in the family data sheet, and use AMD package pinout files as the authoritative source for board-level connectivity. Because the package is large and fine-pitch, validate the PCB stack-up, escape routing, and assembly process before release. This page combines package, logic-resource, temperature, and technology specifications with family-level design guidance, verified drop-in candidates, and practical PCB considerations that help engineers evaluate the XC4VFX20-11FF672C for a new Virtex-4 design.

RFQ যোগাযোগ
XC4VFX20-11FF672I - Virtex-4 FX FPGA, 672-BBGA | AMD
XC4VFX20-11FF672I

XC4VFX20-11FF672I - Virtex-4 FX FPGA, 672-BBGA | AMD

The AMD Xilinx XC4VFX20-11FF672I is a Virtex-4 FX field-programmable gate array with 19,224 logic cells, 3,136 logic blocks, and a 672-pin FCBGA package. It uses 90 nm CMOS technology, operates from a typical 1.2 V core supply, and is identified in the supplied product records as the -11 speed grade with industrial temperature classification. The device combines programmable logic, block RAM, DSP resources, dedicated input/output, and embedded processing capability in one highly integrated FPGA package. An FPGA is a semiconductor device whose digital function is defined after manufacture by loading a configuration bitstream. The Virtex-4 FX family sits within the broader field-programmable gate array category, alongside programmable logic devices, CPLDs, and ASICs. Unlike a fixed-function ASIC, an FPGA allows engineers to revise logic, interfaces, timing behavior, and parallel processing architectures without changing the PCB. The XC4VFX20-11FF672I is therefore useful when a design needs substantial logic density, multiple dedicated I/O, high-speed fabric, or a configurable mix of hardware processing and external interfaces. Key device characteristics include 90 nm CMOS construction, 19,224 logic cells, 3,136 logic blocks, 2,136 configurable logic blocks as reported in the retrieved specification record, and 672 package pins. The device is identified with a 1.2 V supply and an operating temperature range of 0 to 85 degrees Celsius for the listed -11 industrial version. Its high pin count supports broad connectivity for external memory, clocks, serial links, data converters, and board-level control signals. The XC4VFX20-11FF672I is organized around a programmable fabric with dedicated resources for block RAM, DSP arithmetic, and embedded hard processors. This architecture allows designers to implement parallel datapaths, hardware-assisted control, packet processing, signal conditioning, and interface bridging while maintaining deterministic FPGA timing. The -11 speed grade provides a defined performance class within the Virtex-4 family, while the 672-pin package provides a large number of user I/O and dedicated configuration connections. Typical applications include telecommunications equipment, industrial automation, instrumentation, network appliances, embedded control systems, and high-performance signal-processing platforms. In a communications design, the FPGA can implement parallel packet engines, bus interfaces, and data pipelines. In industrial control, it can combine deterministic machine interfaces with safety monitoring and programmable logic. In test and measurement equipment, dedicated DSP blocks can accelerate filters, transforms, and fixed-point arithmetic. Designers should treat the XC4VFX20-11FF672I as a high-pin-count, high-speed device requiring careful power distribution, decoupling, clocking, and signal-integrity control. The manufacturer’s Virtex-4 package pinout files and DS112 family overview should be used to assign every package ball and confirm board-level connectivity. Configuration storage, startup sequencing, auxiliary supply requirements, and thermal management must be designed together because the 672-pin FCBGA footprint offers limited escape routing around the device. This page combines the exact catalog identity, retrieved specifications, package information, practical application guidance, and qualified drop-in alternatives for engineers evaluating the XC4VFX20-11FF672I. It also highlights the distinction between the industrial -I suffix, the commercial -C suffix, the -G package marking, and the related speed-grade options so that replacement decisions are based on electrical and package compatibility rather than part-number similarity alone.

RFQ যোগাযোগ
XC4VFX20-11FFG672C - 19,224-Cell Virtex-4 FX FPGA | AMD
XC4VFX20-11FFG672C

XC4VFX20-11FFG672C - 19,224-Cell Virtex-4 FX FPGA | AMD

The AMD XC4VFX20-11FFG672C is a Virtex-4 FX field-programmable gate array with 19,224 configurable logic cells, 2,136 configurable logic blocks, 320 inputs, and 320 outputs in a 672-terminal FCBGA package. It is manufactured on 90 nm CMOS technology and is identified by the -11 speed grade and 0°C to 85°C commercial-temperature designation. The device combines programmable logic, block RAM, DSP resources, and dedicated I/O in a single FPGA package. A field-programmable gate array is a semiconductor whose digital logic, interconnect, and I/O behavior can be configured after fabrication. Within the semiconductor hierarchy, an FPGA belongs to programmable logic devices and sits above standard fixed-function logic ICs. Its value comes from combining many configurable logic elements in one device, allowing a board to implement control, signal-processing, interface, and protocol functions without using a large collection of discrete logic circuits. The XC4VFX20-11FFG672C provides a listed maximum clock frequency of 1,181 MHz, while another device summary identifies an internal frequency of 1,028 MHz. Its core supply is listed as 1.2 V, with an operating supply range of 1.14 V to 1.26 V. The -11 speed grade occupies the middle of the available Virtex-4 FX performance grades, which are offered in -12, -11, and -10 versions. The 672-contact package provides 320 configurable I/O, supporting high connectivity for parallel buses, data converters, memory interfaces, and external clocks. The 27 mm by 27 mm S-PBGA-B672 package requires careful high-speed escape routing and a multilayer PCB. Although the underlying silicon supports substantial parallel processing, achievable system performance depends on pin assignment, routing congestion, external memory characteristics, and the selected design tools. Typical uses include telecommunications equipment, industrial control, test and measurement, high-speed signal processing, network infrastructure, and embedded systems with substantial programmable logic. The device is appropriate when fixed logic would be inflexible or uneconomical, especially when interface logic, buffering, state machines, and DSP functions must be combined in a single package. System planning should verify the package pinout, power rails, decoupling, clock topology, and I/O standards before layout. Use the manufacturer package pinout files and datasheet when assigning every one of the 672 terminals, because exposed-pad connections, supply pins, configuration pins, and dedicated user I/O require careful PCB treatment. This product record combines the device specifications, package information, compatible same-family alternatives, and practical engineering guidance to support design evaluation. It also distinguishes the -11 commercial-temperature device from related speed-grade, temperature-grade, and package-ordering variants.

RFQ যোগাযোগ
XC4VFX20-11FFG672I - 19,224 Logic FPGA | AMD
XC4VFX20-11FFG672I

XC4VFX20-11FFG672I - 19,224 Logic FPGA | AMD

The AMD XC4VFX20-11FFG672I is a Virtex-4 FX field-programmable gate array with 19,224 logic cells, 320 I/O, an internal frequency of 1028 MHz, and a 672-ball FCBGA package. Built on 90 nm CMOS technology and specified at 1.2 V, it combines programmable logic, block RAM, DSP processing resources, and selectable I/O in one device. A field-programmable gate array, or FPGA, is a semiconductor whose digital logic and interconnects can be configured after manufacture. An FPGA belongs to the programmable-logic and CPLD hierarchy, where configurable parallel hardware provides alternatives to using multiple fixed-function logic ICs. The Virtex-4 FX family combines general-purpose logic with dedicated memories and DSP resources for parallel processing, signal generation, and control systems. Principal features of the XC4VFX20-11FFG672I include 19,224 logic cells, 2,136 logic blocks or cells in the source specification, 320 I/O, and a listed internal frequency of 1028 MHz. Its 90 nm CMOS construction and 1.2 V core supply identify it as a high-density programmable logic device intended for designs requiring substantially more parallel capability than a small CPLD. The FCBGA-672 package supports dense board routing but requires careful escape-routing, via, and power-distribution planning. The package is listed with a maximum seated height of 3 mm. Designers must follow the AMD package pinout files when assigning balls, planning power rails, and checking differential or clock-capable I/O constraints before committing a board layout. Typical applications include telecommunications signal processing, industrial control, test and measurement equipment, networking infrastructure, and embedded video processing. Parallel arithmetic, state-machine logic, and dedicated DSP resources can accelerate workloads that would otherwise require several processors or discrete logic devices, while the 320 I/O support substantial board-level connectivity. A critical design consideration is that the -11 suffix identifies the speed grade while the package and ordering suffixes identify package, temperature, and lead-free construction. PCB designers should use the device package files and complete pinout rather than infer BGA connectivity from another Virtex-4 member. Power delivery should also preserve the documented 1.2 V core requirement and provide clean, decoupled supply paths. This product page combines package, logic-capacity, speed-grade, and ordering-code information with practical selection guidance and pin-compatible family comparisons. It is designed to help engineers identify the correct Virtex-4 FX option, plan a 672-ball BGA layout, and evaluate same-footprint alternatives without overlooking temperature-grade or performance differences.

RFQ যোগাযোগ
XC4VFX40-10FF1152I - 41,904-Cell Virtex-4 FX FPGA | AMD
XC4VFX40-10FF1152I

XC4VFX40-10FF1152I - 41,904-Cell Virtex-4 FX FPGA | AMD

The AMD XC4VFX40-10FF1152I is a Virtex-4 FX field-programmable gate array with 41,904 logic cells, 4,656 configurable logic blocks, 448 I/O, and a maximum internal clock frequency of 1028 MHz. It is packaged in a 1152-ball FCBGA and operates from 0 to 85 °C. The -10 suffix identifies its performance grade, while the FF1152 package designation identifies the large ball-grid-array implementation used for high-pin-count FPGA designs. A field-programmable gate array is a programmable digital integrated circuit whose logic, interconnect, and I/O resources can be configured after manufacture. FPGA design is positioned between fixed-function ASICs and software-programmable processors: an ASIC provides the greatest potential efficiency, while an FPGA combines hardware parallelism with the flexibility to revise a design through programmable configuration. The Virtex-4 FX family also provides embedded hard resources for communications-oriented digital systems. Key resources include 41,904 logic cells, 4,656 configurable logic blocks, 448 I/O, 2,654,208 bits of block RAM, and 192 DSP48 slices. These figures allow parallel datapaths, protocol handling, signal processing, and tightly coupled control logic to be consolidated in one device. The 1152-ball package exposes substantially more interconnect and power pins than a lower-pin-count FPGA package, supporting demanding I/O and power-distribution requirements. The device uses advanced CMOS technology and includes programmable logic, block RAM, dedicated multipliers, clock-management resources, SelectIO, and configurable I/O standards. Its 1028 MHz internal-frequency figure identifies the maximum clocking capability associated with the documented device family, while practical system performance also depends on the selected clocking resources, speed grade, routing, memory interfaces, and design timing closure. Typical applications include telecommunications and networking equipment, industrial control, high-performance signal processing, test and measurement, embedded imaging, and communications infrastructure. The large logic and DSP resources suit parallel algorithms, while the 448 I/O provide connections to external memories, transceivers, converters, and clock sources. The Virtex-4 platform is particularly appropriate when a design requires substantially more parallelism than a small microcontroller or FPGA can provide. Board design should treat this 1152-ball package as a high-pin-count BGA requiring careful escape routing, plane-based power delivery, and multilayer construction. Use the manufacturer pinout, package information, and power-guidance documentation when assigning balls, decoupling networks, and voltage rails. Toolchain and device-file compatibility must also be verified before starting a new design or attempting a replacement. This product record combines the exact manufacturer-device identity with verified package, resource, temperature, and distributor-listing details. It also distinguishes true drop-in package options from redesign-level alternatives and highlights the engineering constraints that matter most when sourcing or integrating this legacy FPGA.

RFQ যোগাযোগ
XC4VFX40-10FF672C - 41,904-Cell Virtex-4 FX FPGA | AMD
XC4VFX40-10FF672C

XC4VFX40-10FF672C - 41,904-Cell Virtex-4 FX FPGA | AMD

The AMD XC4VFX40-10FF672C is a Virtex-4 FX field-programmable gate array with 41,904 logic cells, a -10 speed grade, and a 672-ball FCBGA package. Its 90 nm CMOS construction and 1.2 V internal supply suit high-performance parallel processing, signal processing, communications, networking, industrial control, and test-equipment designs. The device belongs to the FPGA hierarchy: FPGA > programmable logic > reconfigurable digital integrated circuit > semiconductor. An FPGA is a semiconductor whose digital logic, interconnect, and I/O behavior are defined by a configuration bitstream after fabrication. Unlike a fixed-function ASIC, an FPGA allows field upgrades, shorter development cycles, and reusable hardware platforms. The Virtex-4 FX family combines configurable logic blocks, dedicated arithmetic resources, block RAM, and selectable I/O standards in a single package. This makes the XC4VFX40 useful when design flexibility and parallel processing matter more than the unit cost of a custom ASIC. The XC4VFX40-10FF672C provides 41,904 logic cells organized into 4,656 configurable logic blocks. Published device information identifies 352 inputs and 352 outputs, a maximum clock frequency of 1028 MHz, and a nominal internal supply of 1.2 V. The -10 designation identifies its speed grade, while the FF672 suffix identifies the 672-ball FCBGA configuration. The device is configured through its configuration architecture and then operates as parallel programmable logic rather than as a conventional fixed-function controller. The principal design consideration is that peak clock capability does not guarantee that every design will close at the same frequency. Timing closure depends on the selected clocking architecture, interconnect demand, memory use, I/O standards, speed grade, and board-level constraints. Pin assignments, differential pairs, power rails, configuration pins, and decoupling requirements must be implemented according to the package and pinout documentation. Because the exact package pin map is not published in the indexed material, engineers should use the official pinout table before assigning a 672-ball PCB. Typical applications include telecommunications line cards, industrial automation controllers, high-speed data acquisition, network packet processing, storage interfaces, and instrumentation. In a parallel filter, the FPGA's configurable logic blocks can implement multiple arithmetic pipelines concurrently, while block RAM can retain samples or lookup data. In communications equipment, selectable I/O and dedicated resources can support high-throughput data paths while retaining the ability to update the bitstream during product maintenance. Power and signal integrity are critical in a 672-ball FCBGA implementation. Follow the manufacturer's recommended power-supply topology and decoupling network, provide a low-impedance reference plane, and keep sensitive configuration and clock routing away from high-slew-rate outputs. Validate BGA assembly, X-ray inspection, and thermal behavior early in the hardware schedule because package complexity can outweigh logic-design effort. This product record combines the exact orderable MPN, package and resource identifiers, family-level technical characteristics, drop-in family variants, application guidance, and design checks. It is structured to help procurement and engineering teams qualify the Virtex-4 FX device while keeping unresolved electrical and pin-level values explicit rather than estimated.

RFQ যোগাযোগ
XC4VFX40-10FF672I - 41,904-Cell 90 nm FPGA | AMD
XC4VFX40-10FF672I

XC4VFX40-10FF672I - 41,904-Cell 90 nm FPGA | AMD

The AMD XC4VFX40-10FF672I is a Virtex-4 FX field-programmable gate array with 41,904 logic cells, 90 nm CMOS fabrication, a 1.2 V internal supply, and a 672-BBGA FCBGA package. It is identified by the -10 speed grade and industrial temperature designation while providing high-density programmable logic for communications, industrial control, test equipment, and embedded signal-processing systems. A field-programmable gate array is a semiconductor whose logic, routing, and I/O functions are configured after fabrication. The Virtex-4 FX FPGA belongs to the broader FPGA, programmable-logic, semiconductor, and digital-signal-processing hierarchies. Unlike a fixed-function application-specific integrated circuit, an FPGA allows designers to implement parallel processing, control, protocol, and interface logic in one reconfigurable device. The XC4VFX40-10FF672I combines 41,904 logic cells with an internal frequency listed as 1,028 MHz. Its 672-pin FCBGA package supports a high-density connection interface for systems requiring numerous I/O and internal signal routes. The -10 designation identifies its speed grade, while the trailing I identifies the industrial-temperature option. Designers must also account for the package's 1 mm ball pitch and its demanding board-level power, thermal, and signal-integrity requirements. Virtex-4 FX devices are available in -12, -11, and -10 speed grades, with -12 providing the highest performance according to the family documentation. The -10 grade is therefore positioned below the -12 grade in maximum timing performance, but it can satisfy designs that prioritize the -10 grade operating point without requiring the fastest available grade. Final design timing must be checked against the applicable AMD device specifications rather than inferred from the family headline frequency. Typical uses include high-speed data acquisition, industrial automation, communications infrastructure, embedded processing, and test-and-measurement systems. Parallel pipelines are especially suitable because FPGA logic can execute multiple channels or lanes concurrently. The device can combine programmable logic, DSP-oriented processing, memory interfaces, and external I/O while preserving the flexibility of field updates and product-line differentiation. PCB implementation requires careful treatment of the 672-BBGA FCBGA footprint. Power and ground planes should be designed for the device's multi-supply architecture, while decoupling must be placed close to the relevant balls. Full-package escape routing, simultaneous-switching-noise control, and high-speed length matching are necessary to preserve signal integrity. Thermal analysis should use actual utilization, ambient temperature, airflow, and board construction rather than a generic package-power assumption. This product page combines the exact ordering information, package details, architecture description, qualified comparison options, and practical implementation guidance needed to evaluate XC4VFX40-10FF672I for a new FPGA design or an existing Virtex-4 board.

RFQ যোগাযোগ
XC4VFX40-10FFG672C - 41,904-Cell FPGA | AMD | Industrial
XC4VFX40-10FFG672C

XC4VFX40-10FFG672C - 41,904-Cell FPGA | AMD | Industrial

The AMD XC4VFX40-10FFG672C is a Virtex-4 FX field-programmable gate array built on 90 nm CMOS technology, with 41,904 logic cells, 4,656 configurable logic blocks, and 352 user I/O in a 672-pin FCBGA package. The device operates from a 1.2 V core supply, is specified for a 0°C to 85°C temperature range, and belongs to the -10 speed grade. A field-programmable gate array is a semiconductor device whose digital logic, interfaces, and signal processing are configured after manufacture. In the device hierarchy, an FPGA is a programmable logic device, while an FPGA combines programmable logic blocks, programmable I/O, memory resources, clocking, and dedicated fabric into one reconfigurable integrated circuit. The Virtex-4 FX architecture gives engineers a single device for parallel processing, interface bridging, protocol handling, and embedded control without a custom ASIC. Key resources include 41,904 logic cells organized into 4,656 configurable logic blocks. The device provides 352 I/O and uses a 1.2 V supply for its core, while the -10 designation identifies its performance grade. Its 672-pin flip-chip ball grid array supports the high-density pin and routing requirements of the Virtex-4 FX implementation. The 90 nm CMOS process places this device in the mature generation of high-density programmable logic used for communications, industrial control, test equipment, signal processing, and embedded systems. Architecturally, the FPGA supports parallel digital implementation through its configurable logic blocks and routing fabric. This parallelism allows multiple independent channels, protocol engines, or control paths to execute concurrently. The 352-I/O interface provides substantial connectivity, while the large cell count supports designs combining logic, state machines, data alignment, and interface functions. Exact clock, memory, differential-I/O, configuration, and electrical limits should be established from the manufacturer data sheet for the selected board-level implementation. Typical applications include industrial control and automation, communications infrastructure, instrumentation, broadcast video processing, semiconductor test systems, and embedded signal-processing platforms. It is particularly useful when concurrent logic and many external connections are required but the schedule or economics of an ASIC are unfavorable. The device can also support hardware updates because its configuration logic can be reprogrammed rather than permanently masked. Board design must account for the FCBGA package, power distribution, decoupling, configuration storage, clocking, and high-speed routing. Place power and ground connections according to the package and board guidelines in the manufacturer documentation, and validate signal integrity with the selected I/O standards. A prototype or replacement should be checked for device identifier, speed grade, temperature grade, package fit, configuration compatibility, and complete timing closure rather than by package name alone. This product record combines the verified device identity, package and resource summary, family-level replacement context, and engineering selection guidance. It also highlights the practical checks required to migrate a 672-ball Virtex-4 FX design without overlooking configuration, temperature, timing, or PCB-compatibility differences.

RFQ যোগাযোগ
XC4VFX40-10FFG672I - 41,904-Cell Virtex-4 FX FPGA | AMD
XC4VFX40-10FFG672I

XC4VFX40-10FFG672I - 41,904-Cell Virtex-4 FX FPGA | AMD

AMD XC4VFX40-10FFG672I is a Virtex-4 FX field-programmable gate array with 41,904 logic cells, 4,656 configurable logic blocks, a 1,028 MHz internal frequency, and a 672-ball FCBGA package. The industrial-temperature grade operates from 0°C to 85°C and combines programmable logic with dedicated DSP, PowerPC 405 processor, and multi-gigabit RocketIO resources. A field-programmable gate array is a semiconductor whose digital architecture is configured after fabrication. An FPGA belongs to the programmable-logic hierarchy, where configurable logic blocks implement Boolean logic, state machines, datapaths, and interface logic. The Virtex-4 FX family adds heterogeneous processing resources so one device can combine parallel logic, DSP pipelines, processor software, and high-speed serial connectivity. The XC4VFX40-10FFG672I provides 352 I/O in a 27 mm by 27 mm FCBGA package and is manufactured using a 90 nm triple-oxide process. Its -10 speed grade, industrial temperature range, and 1.2 V supply identify it for industrial embedded systems requiring substantial logic density in a compact surface-mount device. Two PowerPC 405 processor blocks provide a hard processor subsystem alongside XtremeDSP slices and RocketIO transceivers. The combination of 4,656 configurable logic blocks and dedicated fixed-function resources allows hardware partitioning. General-purpose logic can implement control paths and protocol state machines, while DSP slices handle filters, transforms, and digital signal processing. RocketIO channels support multi-gigabit serial links, and the embedded processor blocks can execute control software or coordinate test and initialization functions. Device configuration is performed through the FPGA configuration architecture rather than a conventional masked ROM program. Typical uses include industrial control and test equipment, high-performance telecommunications, aerospace and defense systems, embedded signal-processing platforms, and network appliances. The device is especially appropriate when a design requires deterministic parallel processing alongside serial connectivity and enough logic capacity for multiple subsystems. Exact transceiver counts, power specifications, configuration interface details, and package thermal data must be confirmed in the AMD Virtex-4 family documentation before schematic release. PCB implementation requires careful power and signal-integrity work around the 672-ball FCBGA. Follow the package ball-assignment, recommended decoupling, and high-speed routing guidance in the family datasheet. Validate the complete power-up sequence and configuration interface on hardware because the industrial-grade FPGA combines multiple supply rails, high-speed I/O, and a large BGA escape requirement. This product record combines device-specific characteristics, family-level architecture, application guidance, and structured alternatives. It also provides the information needed to distinguish exact ordering codes from nearby speed, package, and temperature variants while preserving the critical check that a proposed replacement uses the same 672-ball FCBGA footprint.

RFQ যোগাযোগ
XC4VFX40-11FF1152I - 41904-Cell Virtex-4 FX FPGA | AMD
XC4VFX40-11FF1152I

XC4VFX40-11FF1152I - 41904-Cell Virtex-4 FX FPGA | AMD

AMD XC4VFX40-11FF1152I is a Virtex-4 FX field-programmable gate array with 41,904 logic cells, 4,656 configurable logic blocks, 448 I/O, and a maximum internal clock frequency of 1028 MHz. The device is manufactured in 90 nm CMOS technology, operates from a 1.2 V core supply, and is packaged in a 1152-terminal FCBGA. Its -11 speed grade and 0°C to 85°C industrial temperature range support high-performance programmable logic designs requiring substantial parallel processing capacity. A field-programmable gate array is a semiconductor whose digital logic, interconnects, and I/O behavior are configured after fabrication. The FPGA category sits below programmable logic devices and combines configurable logic blocks, block RAM, DSP resources, programmable interconnect, and user I/O in one device. Virtex-4 FX devices combine this general-purpose fabric with embedded processors and high-speed serial transceivers, allowing complex control, datapath, connectivity, and network functions to be integrated in a single package. The XC4VFX40-11FF1152I provides 4,656 configurable logic blocks, 41,904 logic cells, and 448 I/O according to the device listing. Its 90 nm CMOS process supports a 1.2 V core operating supply. A 1028 MHz internal frequency is listed for the -11 grade, while the Virtex-4 family supports -10, -11, and -12 performance grades. The 1152-terminal FCBGA exposes substantially more device interconnect than a typical low-pin-count FPGA package. This device belongs to the Virtex-4 FX platform, which integrates programmable logic with a hard processor subsystem and dedicated serial transceiver resources. That architecture allows designers to implement multi-gigabit interfaces, packet-processing engines, embedded control functions, and parallel datapaths without combining several separate devices. Because FPGA configuration determines routing and logic, timing closure depends on placement, clocking constraints, I/O standards, and the selected implementation toolchain. Typical uses include telecommunications line cards, network switches, packet-processing systems, industrial control platforms, high-speed test equipment, and embedded signal-processing appliances. The 448 I/O and 4,656 configurable logic blocks are particularly useful where parallel interfaces coexist with high-speed serial links. Designers should also account for the memory, transceiver, and I/O capabilities required by the selected Virtex-4 FX device rather than evaluating logic cells alone. Power and signal-integrity planning are critical for a 1152-terminal FCBGA implementation. Follow the AMD/Xilinx PCB design guidance for power-plane distribution, decoupling, ball escapes, and high-speed layer transitions. Confirm that every power rail, decoupling capacitor, configuration interface, and I/O standard in the schematic matches the device pinout and board constraints before fabrication. This product record combines device specifications, temperature-grade and speed-grade distinctions, verified drop-in candidates, and practical selection guidance. It also highlights where a direct PCB substitution can retain the package while changing performance grade, industrial temperature coverage, or configuration-device suffix, allowing procurement and engineering teams to assess each transition explicitly.

RFQ যোগাযোগ