উপশ্রেণী

পণ্য (44,000+)

XC4VFX40-11FF672I - 90nm Virtex-4 FX FPGA | AMD
XC4VFX40-11FF672I

XC4VFX40-11FF672I - 90nm Virtex-4 FX FPGA | AMD

The AMD XC4VFX40-11FF672I is a Virtex-4 FX field-programmable gate array built on a 90 nm CMOS process, with 4,656 logic cells and a listed internal frequency of 1,028 MHz. It is offered in a 672-pin FCBGA package measuring 27 mm by 27 mm, with an operating-temperature range of 0°C to 85°C. The -11 suffix denotes the device speed grade, while the final I identifies the specified temperature class. A field-programmable gate array is a semiconductor whose digital logic, interconnect, and I/O behavior are configured after manufacture. FPGA devices sit within the broader programmable-logic hierarchy alongside CPLDs, and are used when designers need parallel processing, flexible interfaces, high-speed serial connectivity, or application-specific hardware acceleration. The Virtex-4 FX platform combines general-purpose logic resources with integrated capabilities intended for demanding embedded, communications, and signal-processing systems. The XC4VFX40 family provides 4,656 logic cells in the configuration listed for this device. Its CMOS implementation supports a 1.2 V core supply, while user I/O and auxiliary supply requirements are defined by the family documentation. The 672-pin FCBGA package provides a substantial connection count for external memory, parallel buses, clocks, configuration signals, and high-speed I/O. The reported 1,028 MHz internal frequency represents a device-level performance figure rather than a guarantee that every I/O interface can operate at that frequency. Configuration and system integration are central to this device’s implementation. Designers must observe the power sequencing, configuration-interface, clocking, decoupling, and I/O-standard requirements in the AMD Virtex-4 family documentation. A 27 mm by 27 mm BGA also demands careful PCB planning because solder escape routing, thermal management, and assembly process controls become more restrictive as pin pitch decreases. Typical applications include telecommunications equipment, industrial control, test and measurement, high-speed communications, embedded signal processing, and custom accelerator logic. The large FCBGA package is most appropriate for systems that can support a complex multilayer PCB and controlled assembly process rather than low-complexity prototype boards. The principal design trade-off is capability versus implementation effort. This FPGA offers substantial programmable logic and a high pin count, but requires careful BGA layout, robust multi-rail power delivery, thermal analysis, and validated configuration logic. Verify all speed-grade, temperature, voltage, and package details before releasing a production PCB. This page combines device-level specifications, engineering guidance, application analysis, and same-footprint upgrade options to support FPGA selection and board design. It also highlights where changes in speed grade, temperature class, or package marking affect replacement decisions.

RFQ যোগাযোগ
XC4VFX40-11FFG672C - 41,904-Cell Virtex-4 FX FPGA | AMD
XC4VFX40-11FFG672C

XC4VFX40-11FFG672C - 41,904-Cell Virtex-4 FX FPGA | AMD

The AMD XC4VFX40-11FFG672C is a Virtex-4 FX field-programmable gate array with 41,904 logic cells, 90 nm CMOS technology, a 1.2 V core supply, and 672-ball FCBGA packaging. The -11 speed grade supports general-purpose programmable-logic and signal-processing designs, while the FX architecture integrates programmable logic with dedicated hardware resources for demanding embedded systems. A field-programmable gate array is a semiconductor device whose digital circuits are configured after fabrication. An FPGA belongs to the programmable-logic hierarchy and provides configurable logic, block RAM, digital signal processing resources, and programmable I/O in one integrated device. Compared with a fixed-function application-specific integrated circuit, an FPGA allows design revisions to be implemented by loading a new bitstream rather than fabricating a new ASIC. The XC4VFX40 provides 41,904 logic cells and 352 dedicated multipliers according to the AMD Virtex-4 family documentation. Its 90 nm CMOS process and 1.2 V operating core voltage place it within the Virtex-4 generation of Xilinx/AMD FPGAs. The 672-BBGA package supports high-density board integration, and the suffix “C” identifies the commercial-temperature product grade. The package is offered as FCBGA, also described in distributor catalogs as a 27 mm by 27 mm, 672-ball package. The FX family combines configurable logic with dedicated DSP blocks for filtering, transforms, and fixed-point arithmetic. Designers can partition an application among programmable logic, DSP slices, block RAM, and external memory interfaces rather than using separate fixed-function devices for every function. The -11 grade provides a distinct speed option within the Virtex-4 portfolio, and exact clock, I/O, and memory-interface limits should be selected from the family data sheet for the intended design. Typical uses include industrial control and automation, high-speed data acquisition, communications infrastructure, test and measurement, embedded signal processing, and prototype systems requiring substantial parallel logic. The same device family can implement control logic, hardware video or packet processing, and DSP pipelines when system timing, memory bandwidth, and I/O requirements remain within the device limits. PCB design must account for the 672-ball package, its 1 mm ball pitch, separate supply requirements, and high-speed routing constraints. Use the AMD package documentation and pinout files to assign balls, connect all required power and ground rails, and implement the recommended decoupling, configuration, clock, and differential I/O layouts. Existing Vivado or ISE designs must be checked against the exact device identifier before recompilation. This product record combines the exact device identity, family characteristics, package information, drop-in family alternatives, and practical selection guidance. The comparison table highlights where speed grade, temperature grade, or logic density changes affect substitution, while the design notes focus on footprint compatibility, configuration, signal integrity, and power integrity.

RFQ যোগাযোগ
XC4VFX40-11FFG672I - Virtex-4 FX FPGA, 41904 Logic Cells | AMD
XC4VFX40-11FFG672I

XC4VFX40-11FFG672I - Virtex-4 FX FPGA, 41904 Logic Cells | AMD

The Advanced Micro Devices, Inc. XC4VFX40-11FFG672I is a Virtex-4 FX field-programmable gate array with 41,904 logic cells, 4,656 configurable logic blocks, and 352 user I/O in a 672-ball FCBGA package. The -11 speed grade operates with a 1.2 V core supply, making it a general-purpose programmable-logic device for demanding embedded, telecommunications, networking, and signal-processing systems. A field-programmable gate array is a semiconductor device whose digital logic, interconnect, and I/O behavior are configured after manufacture. Within the FPGA hierarchy, the Virtex-4 FX family combines general-purpose programmable logic with high-speed serial transceivers and selectable DSP resources. The XC4VFX40 is positioned for designs that require substantially more parallel processing capacity than a small microcontroller or CPLD while retaining deterministic hardware-level timing. Key characteristics include a 4,656-CLB logic fabric, 41,904 logic cells, and 352 I/O. The -11 suffix identifies the device's performance grade within the Virtex-4 family, where -12 is the highest speed grade and -10 is the lowest. The FFG672 package designation identifies a 672-ball fine-pitch BGA construction, and a 27 mm by 27 mm body with 1.00 mm terminal pitch supports dense board-level integration. The device uses CMOS technology and includes dedicated clocking, block RAM, and DSP capabilities for parallel data processing. Its internal clock figure is listed as 1,028 MHz, although achievable system clocking depends on the selected logic path, I/O standard, speed grade, device utilization, timing constraints, and power or temperature conditions. Typical applications include telecommunications line cards, network interface controllers, industrial protocol bridges, video and image-processing pipelines, radar or signal-processing modules, and high-throughput embedded control. These designs benefit from parallel datapaths, abundant configurable logic, and deterministic hardware implementation rather than software-driven sequential execution. PCB implementation requires careful power-plane segmentation, controlled-decoupling via via stitching, and pin-aware escape routing from the fine-pitch BGA. Because this is a high-pin-count device, use the AMD package pinout files and device-specific design guidance to assign every ball, power rail, configuration signal, and transceiver connection. This page consolidates device specifications, package details, lifecycle considerations, comparison points, and practical implementation guidance into a single engineering reference for the XC4VFX40-11FFG672I.

RFQ যোগাযোগ
XC4VFX60-10FF672C - 56,880-Cell Virtex-4 FX FPGA | AMD
XC4VFX60-10FF672C

XC4VFX60-10FF672C - 56,880-Cell Virtex-4 FX FPGA | AMD

The AMD XC4VFX60-10FF672C is a Virtex-4 FX field-programmable gate array containing 56,880 logic cells in a 672-pin FCBGA package. The device provides 25,280 adaptive logic modules, 6,320 configurable logic blocks, a -10 speed grade, and operation from a 1.2 V core supply. Its programmable architecture combines configurable logic, block RAM, DSP48 processing resources, dedicated I/O, and high-speed serial connectivity for parallel processing, communications, control, and embedded systems. An FPGA is a semiconductor whose digital circuit is configured after manufacture through a programmable bitstream. Within the product hierarchy, the XC4VFX60 belongs to the Virtex-4 FX FPGA family, which combines general-purpose programmable logic with parallel processing, block memory, DSP48 arithmetic resources, and dedicated I/O. Compared with a fixed-function ASIC, an FPGA permits logic, interfaces, and signal-processing behavior to be revised through configuration rather than a redesigned silicon mask. Key characteristics include 56,880 logic cells, 25,280 adaptive logic modules, and 6,320 configurable logic blocks. The -10 designation identifies the device speed grade, while the 672-ball FCBGA package supports dense connection to surrounding PCB layers. Its 1.2 V core voltage supports the performance and power characteristics associated with the Virtex-4 generation, while programmable I/O and dedicated high-speed interfaces allow system-specific communication paths to be implemented in the device. The architecture is intended for designs requiring substantial parallel throughput rather than sequential instruction throughput. Configurable logic blocks and adaptive logic modules can implement datapaths, protocol engines, state machines, and control logic concurrently. Block RAM supports on-chip buffering and storage, while DSP48 resources accelerate arithmetic operations such as filtering, transforms, and fixed-point signal processing. Dedicated I/O and serial resources can reduce the external component count when the required interfaces are supported by the selected device configuration. Typical uses include telecommunications line-card control, industrial automation, high-speed instrumentation, network packet processing, defense and aerospace control systems, and embedded signal-processing platforms. A Virtex-4 FX implementation can consolidate parallel logic and DSP functions into one programmable device while preserving the ability to update the bitstream during product development. Exact I/O standards, transceiver features, clocking requirements, and board-level power sequencing should be confirmed against the Virtex-4 family documentation before schematic capture. The principal design consideration is the BGA implementation. A 672-ball FCBGA requires a dense multilayer PCB, exact ball assignments, controlled escape routing, and careful power and ground distribution. The device also requires multiple supply rails, decoupling, clocking, configuration memory, and a valid startup sequence. Thermal performance depends on the FPGA utilization, switching activity, supply voltage, board construction, airflow, and the thermal design of the assembled system rather than on the package name alone. This product record combines device identity, package information, programmable-logic capacity, replacement options, comparison parameters, and practical PCB guidance. It is intended to accelerate sourcing and engineering decisions while keeping mechanical, thermal, configuration, and power-supply checks tied to the original manufacturer documentation.

RFQ যোগাযোগ
XC4VFX60-10FF672I - 56,880-Cell Virtex-4 FX FPGA | AMD
XC4VFX60-10FF672I

XC4VFX60-10FF672I - 56,880-Cell Virtex-4 FX FPGA | AMD

The AMD XC4VFX60-10FF672I is a Virtex-4 FX field-programmable gate array with 56,880 logic cells, 352 user I/Os, a 1.2 V core supply, and 90 nm process technology in a 672-pin FCBGA package. The -10 speed grade provides a distinct performance option for systems requiring predictable timing in logic-intensive embedded designs. Its integrated Virtex-4 FX architecture combines programmable logic with dedicated hardware resources for high-throughput signal processing and general-purpose parallel processing. A field-programmable gate array is a semiconductor whose digital functions are configured after manufacture using a programmable interconnect and configurable logic resources. Within the product hierarchy, an FPGA belongs to programmable logic devices, sits alongside CPLDs, and is implemented as a highly parallel digital semiconductor. Compared with a fixed-function ASIC, an FPGA permits design revisions, adaptable hardware behavior, and faster deployment of complex control, signal-processing, and communications systems. The XC4VFX60-10FF672I combines 56,880 logic cells with 352 user I/O pins in one compact 672-pin FCBGA. The specified 1.2 V core voltage supports low-voltage operation, while the 90 nm fabrication technology reflects the device's period in high-density programmable-logic development. Its 352 I/Os make the device suitable for parallel data acquisition, industrial control, communications infrastructure, embedded vision, and defense or aerospace systems where deterministic parallel processing and substantial external connectivity are valuable. The Virtex-4 FX architecture provides a unified structure of configurable logic, block RAM, dedicated DSP arithmetic, and hard processor resources. This combination allows designers to accelerate data-intensive operations in hardware while retaining programmable control paths. Exact block-RAM, DSP, processor, clock, and I/O performance figures are not stated in the product listing, so engineers should confirm those device-specific limits in the AMD Virtex-4 family documentation before finalizing a clocking, memory, or power budget. Typical implementations include telecom line cards, industrial automation controllers, high-speed measurement systems, radar and signal-processing front ends, network packet processors, and embedded test equipment. The 352 I/O count supports broad parallel interfaces, while the 56,880-cell fabric can host control logic, datapaths, protocol engines, and fixed-point or floating-point processing functions. Designs requiring external processors can also use the integrated hardware resources for tightly coupled accelerator tasks. PCB implementation is the main practical consideration for this 672-pin FCBGA. Power, ground, decoupling, configuration, clock, and high-speed I/O routing must follow the AMD package pinout and PCB design guidance. Differential pairs should use controlled geometry and matched reference planes, while bypass capacitors should connect to the appropriate power and ground planes with very short return paths. Configuration completion and system reset sequencing also require validation before field deployment. This product record combines the exact 56,880-cell, 352-I/O, 1.2 V, 90 nm, 672-FCBGA attributes with same-package speed and temperature alternatives, application guidance, and implementation-focused design notes. It is intended to help engineers identify the correct Virtex-4 FX configuration, verify footprint and lifecycle constraints, and plan a robust implementation before requesting a quotation.

RFQ যোগাযোগ
XC4VFX60-10FFG672C - 56,880-Cell Virtex-4 FX FPGA | AMD
XC4VFX60-10FFG672C

XC4VFX60-10FFG672C - 56,880-Cell Virtex-4 FX FPGA | AMD

The AMD XC4VFX60-10FFG672C is a Virtex-4 FX field-programmable gate array with 56,880 configurable logic cells, 352 I/O positions, 90 nm process technology, and a 1.2 V core supply, housed in a 672-pin FCBGA package. The -10 speed grade targets general-purpose designs requiring a balance of logic density, embedded memory, DSP processing, and programmable I/O. A field-programmable gate array is a semiconductor device whose digital logic, memory, signal processing, and I/O functions are configured after manufacture. An FPGA belongs to the programmable-logic hierarchy, combining configurable logic blocks, programmable interconnect, block RAM, dedicated DSP resources, and selectable I/O standards. This combination allows complex digital systems to be implemented in a compact, reconfigurable device instead of a custom ASIC. The XC4VFX60-10FFG672C provides 56,880 logic cells and 352 I/O positions according to the AMD Virtex-4 family documentation. Its 90 nm fabrication technology supports a 1.2 V operating core, while the FCBGA-672 package provides the board-level connection density required for high-speed parallel interfaces and mixed signal-processing designs. The device belongs to the FX family, which adds programmable DSP resources for filtering, transforms, and other arithmetic-intensive operations. The -10 designation identifies the device speed grade, allowing designers to select a predictable timing-performance level for designs operating within the supported clock and I/O constraints. Configuration and programming are handled through the FPGA configuration architecture, allowing the same board design to support multiple bitstreams or field upgrades when the host system provides the required configuration memory and control logic. Typical applications include industrial control, communications infrastructure, instrumentation, test and measurement, embedded imaging, and high-throughput signal processing. The 352 I/O positions are especially useful where parallel data paths, memory interfaces, clock distribution, and multiple external buses must coexist within a single programmable device. The dedicated DSP resources can accelerate filtering and arithmetic operations without requiring a separate fixed-function processor. Board design should preserve the voltage, decoupling, clock, and high-speed routing requirements associated with a 672-pin FCBGA. Pin assignment, differential-pair constraints, power-plane planning, and package-specific escape routing must be checked against the official Virtex-4 package pinout files before layout release. This page combines package, pricing, lifecycle, alternative-device, and application guidance with practical migration considerations for engineers evaluating the XC4VFX60-10FFG672C or planning a controlled transition to a compatible Virtex-4 FX device.

RFQ যোগাযোগ
XC4VFX60-10FFG672I - 56,880-Cell FPGA with 352 I/O | AMD
XC4VFX60-10FFG672I

XC4VFX60-10FFG672I - 56,880-Cell FPGA with 352 I/O | AMD

The AMD XC4VFX60-10FFG672I is a Virtex-4 FX field-programmable gate array with 56,880 logic cells, 352 user I/Os, and a 672-ball FCBGA package. Fabricated using 90 nm CMOS technology with a 1.2 V core voltage, it combines programmable logic, block RAM, hard processor cores, and high-speed serial transceivers on one semiconductor device. A field-programmable gate array is a semiconductor device whose digital logic is configured after fabrication. An FPGA belongs to the broader programmable-logic hierarchy, alongside CPLDs, and its internal configurable logic blocks, routing fabric, memory, input/output resources, embedded processors, and transceivers can be adapted to many system functions. Unlike a fixed-function ASIC, an FPGA permits design revisions to be implemented by replacing the configuration bitstream rather than fabricating a new chip. The Virtex-4 FX device provides 6,320 configurable logic blocks and 4,276,224 total RAM bits within the 56,880-cell logical resource count. Its 352 user I/Os support board-level connectivity, while the integrated dual PowerPC 405 processor cores provide embedded processing resources. Up to 16 RocketIO transceivers support serial data rates from 622 Mb/s to 6.5 Gb/s, making the device suitable for communications, networking, industrial control, test equipment, and embedded processing systems. The -10 suffix identifies a supported device speed grade for this family, while the FFG672 portion identifies the 672-ball FCBGA package arrangement. This package provides 352 user I/Os and occupies a 27 mm by 27 mm area. The device combines substantial fixed-function hardware with a large programmable fabric, allowing parallel datapaths, protocol bridges, control logic, and hardware acceleration to share the same FPGA rather than requiring separate devices for each function. Typical applications include serial network interfaces, telecommunications line cards, industrial controllers, instrumentation platforms, storage systems, and embedded communications equipment. RocketIO channels can handle high-speed serial links, the PowerPC 405 cores can execute supervisory software, and the programmable I/O can connect external memories and peripherals. System partitioning should account for the fixed silicon resources and the bandwidth available through the routing fabric. PCB implementation requires a high-density, multilayer FCBGA layout with carefully controlled power, ground, and high-speed routing. Follow the AMD package pinout files for ball assignments and escape routing. Decoupling, via-in-pad construction, layer transitions, and differential-pair geometry should be reviewed against the applicable device implementation guidance before fabrication. This product page combines the device’s documented resource counts, package information, speed-grade references, and board-level implications into an engineering-focused selection guide. It also distinguishes same-footprint family alternatives and identifies where a new FPGA platform may provide a longer product roadmap than this mature Virtex-4 FX design.

RFQ যোগাযোগ
XC4VFX60-11FF1152C - 56,880-Cell FPGA with 16 RocketIO | AMD
XC4VFX60-11FF1152C

XC4VFX60-11FF1152C - 56,880-Cell FPGA with 16 RocketIO | AMD

AMD XC4VFX60-11FF1152C is a Virtex-4 FX field-programmable gate array with 56,880 logic cells, 6,320 configurable logic blocks, 1,181 MHz internal frequency, and a 1,152-pin FCBGA package. It combines programmable logic with two embedded PowerPC 405 processor cores and 16 RocketIO multi-gigabit transceivers for high-speed embedded and serial-interface designs. A field-programmable gate array is a semiconductor whose digital logic, interfaces, and signal processing can be configured after manufacture. FPGA belongs to the programmable-logic hierarchy, combining parallel logic elements, block RAM, programmable input/output, dedicated processing cores, and high-speed serial transceivers. This integration allows one configurable device to implement control logic, protocol bridges, packet processing, and embedded software tasks without relying on several separate components. The XC4VFX60-11FF1152C uses 90 nm CMOS fabrication and a 1.2 V supply. Its 56,880 logic cells and 6,320 CLBs provide substantial capacity for telecommunications, industrial control, test equipment, networking, and high-speed embedded systems. The -11 speed grade identifies the device's performance class, while the 1,152-ball FCBGA package supports the dense pin and power-distribution requirements of this large Virtex-4 FX implementation. Two embedded PowerPC 405 cores provide a hardware platform for real-time control, protocol handling, and application-specific processing. Sixteen RocketIO transceivers support high-speed serial links, reducing the need for external line drivers and receivers in suitable point-to-point designs. The combination of parallel programmable logic, processors, and serial transceivers is the central architectural advantage over a conventional ASIC-only or smaller FPGA-only implementation. Typical uses include telecommunications line-card control, network-interface and packet-processing modules, industrial automation controllers, high-speed test systems, embedded communications equipment, and aerospace or defense programs requiring a combination of parallel logic and serial connectivity. Because the device is a mature Virtex-4 FX member, engineers should confirm tooling, design support, and availability before beginning a new production design. PCB implementation requires careful treatment of the 1,152-ball FCBGA footprint, power delivery, thermal management, and high-speed signal integrity. Follow the AMD package and pinout files for ball assignments, and preserve the power and ground-plane structure specified by the device documentation. Configuration-bitstream integrity and sequencing should also be verified before field deployment. This product record combines the device's published architecture, package characteristics, cross-reference options, and practical implementation considerations. It also highlights the distinctions among speed-grade and temperature-ordering variants, helping engineers determine whether a candidate is a true PCB-compatible replacement rather than merely a similar FPGA.

RFQ যোগাযোগ
XC4VFX60-11FF672C - 56,880 Logic Cells FPGA | AMD
XC4VFX60-11FF672C

XC4VFX60-11FF672C - 56,880 Logic Cells FPGA | AMD

The AMD XC4VFX60-11FF672C is a Virtex-4 FX field-programmable gate array with 56,880 logic cells, a -11 speed grade, and a 672-pin flip-chip ball grid array package. The device is manufactured on 90 nm CMOS technology and operates from a nominal 1.2 V core supply, making it suitable for high-density programmable logic, high-speed connectivity, and embedded processing systems. A field-programmable gate array is a semiconductor device whose digital logic, interfaces, and other configurable circuits are programmed after manufacture. Within the FPGA hierarchy, the Virtex-4 FX platform combines programmable logic, block RAM, DSP resources, and high-speed serial connectivity in one device. This combination allows complete digital subsystems to be integrated on a single FPGA rather than assembled from separate programmable and fixed-function components. The XC4VFX60 provides 6,320 configurable logic blocks and 56,880 logic cells. Its -11 designation identifies the device performance grade, while the FF672 package exposes 352 user input/output positions according to the manufacturer listing. SelectIO resources support multiple standards, and the device includes LVCMOS drive-strength options of 2, 4, 6, 8, 12, or 16 mA. These resources support communication, control, storage, and specialized signal-processing interfaces. The FPGA is built on 90 nm CMOS and operates around a nominal 1.2 V supply. Its family architecture includes logic cells, block RAM, DSP48 processing elements, and high-speed serial transceiver resources. A maximum clock frequency of 1,181 MHz is reported for this device family, while exact timing limits remain design- and tool-version-dependent. Designers should use the Virtex-4 timing models and implementation tools for final sign-off rather than treating the maximum figure as a guaranteed operating frequency. Typical applications include industrial control, test and measurement, communications infrastructure, high-speed data acquisition, signal processing, and embedded systems. The integrated DSP and memory resources allow filters, transforms, packet processing, and control logic to share one programmable platform. The large I/O count also makes the device useful for parallel interfaces, custom accelerator boards, and legacy system expansions requiring a high pin count. Implementation requires a 672-ball PCB footprint with careful power, ground, decoupling, and high-speed routing. The exposed package demands a thermal strategy appropriate to the board stack-up and enclosure. Differential and high-speed signals require controlled impedance, while unused inputs must be connected according to the Virtex-4 design guidelines. Configuration, clocking, power sequencing, and JTAG debugging must follow the family architecture documentation. This page combines device specifications, same-package alternatives, application guidance, comparison parameters, and practical PCB considerations. The alternatives are distinguished by temperature grade, speed grade, or ordering code rather than by functional equivalence. Engineers should confirm package markings, timing behavior, temperature requirements, and bitstream compatibility before approving any substitution.

RFQ যোগাযোগ
XC4VFX60-11FF672I - Virtex-4 FX FPGA, 56880 Logic Cells | AMD
XC4VFX60-11FF672I

XC4VFX60-11FF672I - Virtex-4 FX FPGA, 56880 Logic Cells | AMD

The AMD XC4VFX60-11FF672I is a Virtex-4 FX field-programmable gate array with 56,880 logic cells, 6,320 configurable logic blocks, 352 user I/Os, and a maximum internal frequency of 1181 MHz. The device is supplied in a 672-pin FCBGA package and uses CMOS technology with a 1.2 V nominal supply. It is designed for high-performance programmable logic, embedded processing, networking, telecommunications, and signal-processing systems. A field-programmable gate array is a semiconductor device whose digital logic, interconnect, and input/output behavior are configured after manufacture. The Virtex-4 FX architecture combines programmable logic resources with dedicated hardware blocks for high-speed serial connectivity and embedded processing, allowing complex systems to be consolidated into a single device. This FPGA belongs to the Virtex-4 family, which uses 90 nm CMOS technology and is organized around configurable logic blocks, block RAM, dedicated multipliers, and GTP serial transceivers. Key device characteristics include 56,880 logic cells, 6,320 CLBs, 352 user I/Os, and 16 GTP transceivers in the FF672 package. The -11 speed grade provides a maximum internal frequency of 1181 MHz. The device operates from a 1.14 V to 1.26 V supply range with a nominal 1.2 V core voltage, and its specified operating temperature range is 0 °C to 85 °C. The FF672 package supports 352 user I/Os, making it suitable for designs that require substantial parallel connectivity but do not need the 576 user I/Os available in the larger FF1152 package. The FF672 footprint is compatible with other Virtex-4 FX devices in the same package family, including the XC4VFX40 and XC4VFX20, which can support upgrade paths where the required logic and I/O resources remain available. Typical applications include high-speed network interface equipment, telecommunications backplanes, industrial control systems, test and measurement instrumentation, storage controllers, defense and aerospace electronics, and embedded signal-processing platforms. The device is useful when design flexibility, parallel interface density, and dedicated serial connectivity are needed in one programmable component. For PCB design, follow the Virtex-4 FPGA PCB Designer's Guide and the package pinout files from AMD. Decoupling, power-plane distribution, thermal management, and high-speed routing must be planned around the selected speed grade and clocking architecture. Because the package exposes a large BGA land pattern, assembly inspection and adequate thermal spreading are especially important. This page combines device specifications, package details, compatible same-family options, comparison parameters, and application guidance to support component selection and hardware design planning.

RFQ যোগাযোগ
XC4VFX60-11FFG672C - 56,880-Cell Virtex-4 FX FPGA | AMD
XC4VFX60-11FFG672C

XC4VFX60-11FFG672C - 56,880-Cell Virtex-4 FX FPGA | AMD

The AMD XC4VFX60-11FFG672C is a Virtex-4 FX field-programmable gate array with 56,880 logic cells, 6,320 configurable logic blocks, a maximum clock frequency of 1,181 MHz, and a 672-ball FCBGA package. The commercial-temperature suffix C identifies the device as the 0°C to 85°C grade, while the -11 designator identifies its performance class. An FPGA is a semiconductor whose digital logic, interfaces, and signal-processing blocks are configured after manufacture. The Virtex-4 FX family combines configurable logic blocks with dedicated processing, memory, clocking, and high-speed serial resources. This hierarchy places the XC4VFX60 in the FPGA and CPLD category, where parallel programmable logic, embedded hard processors, and high-speed I/O can support complete digital subsystems on one device. Key resources include 4,276,224 RAM bits, two embedded PowerPC 405 processor cores, and as many as 16 RocketIO multi-gigabit transceivers. The device provides 352 user I/Os and operates from a nominal 1.2 V core supply, with a reported range of 1.14 V to 1.26 V. These resources make the FPGA suitable for parallel data processing, embedded control, telecommunications, industrial equipment, and high-speed serial interfaces. The Virtex-4 FX architecture is implemented on 90 nm copper CMOS technology. Its combination of 6,320 configurable logic blocks and hard processor cores allows designers to partition a design between programmable logic and dedicated embedded processing. The 1,181 MHz figure is the maximum internal clock stated for this family, rather than a guarantee that every design or I/O interface will operate at that rate. Typical applications include telecom line cards, industrial control systems, network interface equipment, high-speed protocol bridges, embedded processors, and test systems requiring substantial parallel logic. The 672-ball FCBGA also provides a large pin count for high-speed differential pairs, memory connections, clocks, and programmable I/O. The number of available RocketIO channels depends on the selected device, package, pin configuration, and design constraints. Designers should verify the exact bank voltages, pin assignments, configuration requirements, and differential I/O rules against the AMD package pinout files before layout release. A 27 mm by 27 mm BGA requires careful escape routing, adequate via access, and a thermal design that accounts for the concentration of power and ground balls beneath the device. This page combines the device architecture, package characteristics, configuration guidance, drop-in family alternatives, and application-oriented design notes. It also provides search-focused technical comparisons for engineers evaluating PCB reuse, speed-grade substitution, temperature-grade substitution, and FPGA resource planning.

RFQ যোগাযোগ
XC4VFX60-11FFG672I - 672-Ball Virtex-4 FX FPGA | AMD
XC4VFX60-11FFG672I

XC4VFX60-11FFG672I - 672-Ball Virtex-4 FX FPGA | AMD

The AMD XC4VFX60-11FFG672I is a Virtex-4 FX field-programmable gate array built on 90 nm CMOS technology and packaged in a 672-ball FCBGA. It provides 56,880 logic cells, 352 user I/O, an operating temperature range of 0 C to 85 C, and an internal frequency listed at 1181 MHz. The device also includes 6,320 logic blocks and operates from a 1.2 V core supply. A field-programmable gate array, or FPGA, is a reprogrammable semiconductor used to implement digital logic, control systems, signal processing, and hardware acceleration. An FPGA sits between fixed-function ASICs and software processors: its parallel configurable architecture can execute multiple tasks concurrently, while its logic, block RAM, DSP resources, processors, and transceivers are configured through programmable logic rather than fixed masks. The Virtex-4 FX platform combines substantial programmable logic capacity with hard processor and transceiver capabilities. The XC4VFX60-11FFG672I is suited to embedded systems, digital signal processing, and high-speed communication designs. Its 352 I/O provide external interfaces for control, data capture, memory, clocks, and serial links, while the 56,880-cell fabric supports parallel datapaths and high-throughput state machines. The -11 designation identifies the middle speed grade in a family also offered in -12 and -10 grades, according to the Virtex-4 family literature. The I suffix identifies the industrial temperature option, and the FFG672 package designation identifies the 672-ball package. Package pin assignment must be taken from the AMD Virtex-4 package pinout files because a full 672-ball map is not reproduced in the component listing. Typical deployments include industrial control equipment, telecommunications infrastructure, instrumentation, video processing, radar and signal-processing subsystems, and embedded communications platforms. Engineers should use the AMD package pinout file when assigning PCB tracks and confirm the selected device, package code, and temperature grade before releasing a layout. This page consolidates device specifications, qualified package information, practical design guidance, and same-package upgrade options. It also compares the -11 device with other Virtex-4 FX speed grades and the XC4VFX40, helping engineers separate genuine drop-in choices from options that require a different package or device density.

RFQ যোগাযোগ
XC4VLX15-10FF668C - 13,824-Cell FPGA | AMD | Logic
XC4VLX15-10FF668C

XC4VLX15-10FF668C - 13,824-Cell FPGA | AMD | Logic

The AMD XC4VLX15-10FF668C is a Virtex-4 LX field-programmable gate array with 13,824 logic cells, 320 I/O, and a 668-ball FCBGA package. The device is manufactured in 90 nm CMOS technology, operates from a 1.2 V core supply, and is identified as a -10 speed-grade component with a listed maximum operating frequency of 1028 MHz. A field-programmable gate array is a programmable digital logic device. It belongs to the FPGA and CPLD hierarchy and ultimately to the broader semiconductor and digital-logic categories. Unlike a fixed-function application-specific integrated circuit, an FPGA combines configurable logic blocks, programmable I/O, and internal routing resources. This architecture allows a board to be adapted, revised, or expanded by loading a different bitstream rather than changing the integrated circuit. The XC4VLX15-10FF668C provides 13,824 logic cells and 320 I/O in a 668-BBGA FCBGA package. Its 90 nm CMOS process and 1.2 V core supply place it among the established Virtex-4 generation of FPGAs. The 320-I/O count supports substantial connectivity to external memory, data converters, network transceivers, and general-purpose logic interfaces, while the -10 grade identifies its performance class within the device family. The architecture combines 1,536 configurable logic blocks, according to the listed device description, with programmable interconnect resources and selectable I/O standards. A design can divide its resources among parallel datapaths, control logic, state machines, protocol interfaces, and DSP-oriented arithmetic pipelines. The 1.2 V core operating point requires a suitably regulated supply, while the 668-ball package demands careful PCB escape-routing and thermal analysis. Typical uses include industrial control, communications equipment, instrumentation, image and signal processing, high-speed interface bridging, and embedded test systems. In each case, the FPGA provides reconfigurable parallelism and adaptable I/O, making it useful where product requirements may evolve or where several fixed-format functions must be consolidated into one programmable device. PCB implementation should follow the AMD Virtex-4 package pinout files and the device-specific design guidance. Because no 668-ball diagram is present in the package library, verify every power, ground, configuration, and user-I/O assignment against the manufacturer package files before fabrication. Differential pairs and high-speed memory interfaces also require controlled impedance, length matching, and unobstructed return paths. This page organizes the exact package, logic-cell, I/O, process, speed, and lifecycle information for the XC4VLX15-10FF668C. It also identifies same-family drop-in candidates, separates lead-free and industrial-grade order codes, and highlights the package and timing checks that must be completed before reuse on an existing board.

RFQ যোগাযোগ
XC4VLX15-10FF668I - 13,824-Cell Virtex-4 LX FPGA | AMD
XC4VLX15-10FF668I

XC4VLX15-10FF668I - 13,824-Cell Virtex-4 LX FPGA | AMD

AMD XC4VLX15-10FF668I is a Virtex-4 LX field-programmable gate array with 13,824 logic cells, 320 I/O, and a 668-pin FCBGA package. The device uses a 90 nm CMOS process, operates from a 1.2 V core supply, and is offered in the -10 speed grade with an industrial-temperature designation. Its combination of programmable logic, block RAM, DSP resources, and a high pin count makes it suitable for demanding embedded systems requiring substantial parallel processing and external connectivity. A field-programmable gate array is a semiconductor whose digital functions are defined after fabrication through a configuration bitstream. The Virtex-4 LX FPGA family combines configurable logic blocks, programmable interconnect, block RAM, dedicated DSP resources, and selectable I/O resources. Within the broader hierarchy, this device is an FPGA, a semiconductor, and a programmable-logic IC. Its architecture permits one package to support multiple control, data-processing, interface, and signal-routing functions instead of requiring a collection of fixed-function devices. The principal characteristics visible for XC4VLX15-10FF668I include 13,824 logic cells, 320 user I/O, 884,736 as listed in the distributor specification snippet, and a 668-pin FCBGA package. The -10 suffix identifies the performance grade within the Virtex-4 family. The listing also identifies the device as a CMOS FPGA, while an FPGA catalog entry specifies 90 nm fabrication technology and a 1.2 V operating supply. The high logic density and extensive I/O capacity distinguish this Virtex-4 LX device from smaller FPGAs and CPLDs. A 320-I/O package allows concurrent connections to external memory, parallel buses, high-speed interfaces, control signals, and clock resources without requiring multiple programmable-logic packages. The FCBGA construction also supports dense PCB routing, but its thermal and mechanical requirements demand careful PCB design, thermal verification, and assembly control. Typical applications include industrial control, telecommunications equipment, test and measurement systems, embedded video processing, data-acquisition systems, and high-performance communications infrastructure. In these systems, the Virtex-4 LX FPGA can implement parallel datapaths, protocol controllers, state machines, signal processing, and programmable I/O logic in a single device. The same footprint can also support laboratory prototypes and production configurations that differ in bitstream or external interface behavior. A critical design consideration is that the 668-ball FCBGA cannot be treated like a leaded package. Its power, ground, and high-speed signals require a multilayer PCB with carefully controlled impedance, uninterrupted return paths, dense via distribution, and assembly-process qualification. Confirm the exact pin assignments from the AMD Virtex-4 package pinout files before routing the board. This product record combines the exact device identity, 668-package alternatives, technical distinctions, application guidance, and package-level engineering considerations to support component selection and PCB planning without relying solely on a basic catalog listing.

RFQ যোগাযোগ
XC4VLX15-10FF676C - Virtex-4 LX 13,824-Cell FPGA | AMD
XC4VLX15-10FF676C

XC4VLX15-10FF676C - Virtex-4 LX 13,824-Cell FPGA | AMD

AMD XC4VLX15-10FF676C is a Virtex-4 LX field-programmable gate array with 13,824 logic cells, 884,736 bits of configuration memory, and 320 I/O in a 676-BBGA FCBGA package. The -10 designation identifies the device speed grade, while the 676 package provides a high pin count for demanding embedded and signal-processing designs. Its device type, logic-cell count, configuration memory, I/O count, package size, and -10 speed grade form the principal electrical and mechanical identifiers. A field-programmable gate array, or FPGA, is a programmable semiconductor in which digital logic and interconnect are configured after fabrication. An FPGA belongs to the parallel programmable-logic hierarchy, where configurable logic blocks, programmable I/O, embedded resources, and memory are connected by routing fabric. This capability allows one physical device to implement different control, arithmetic, communications, or signal-processing functions through a configuration bitstream. The XC4VLX15 combines 13,824 logic cells with 320 I/O, providing substantial parallelism for embedded control, industrial automation, communications, signal processing, and test equipment. Its 884,736-bit configuration memory stores the programmable logic definition and configuration data. The -10 speed grade supports higher clocking performance than slower members of the same Virtex-4 LX family while retaining the same 676-BBGA FCBGA mechanical format. The XC4VLX15-10FF676C is a discrete, non-volatile FPGA whose configuration is loaded from an external source. Unlike mask-programmable logic devices, an FPGA can be reconfigured for multiple firmware images or board-level functional variations. Engineering reuse is therefore achieved through configuration bitstreams and tool-supported constraints rather than changing the physical IC. Designers must preserve the exact device identifier, package, speed grade, and supported configuration-memory requirements across the board design and production configuration. Typical applications include industrial control systems, communications infrastructure, instrumentation, embedded video, aerospace-support equipment, and high-performance digital signal processing. The 320-I/O count is particularly useful when a design needs numerous differential or single-ended interfaces alongside substantial parallel processing. Compared with a smaller FPGA in the same family, the LX15 provides additional logic and I/O without moving to a larger package. Place the XC4VL15-10FF676C on a multilayer PCB with a continuous ground plane, short point-of-load supply connections, and controlled-length routes for high-speed differential pairs. Follow the AMD package pinout and configuration guidance when assigning power, ground, configuration, clock, and user I/O pins. Verify thermal performance at the highest expected junction temperature because a 676-BBGA device can concentrate power dissipation beneath its central package area. This page combines the exact catalog identifiers, package details, source links, design guidance, and carefully qualified drop-in alternatives to support faster engineering review. It also distinguishes genuine same-package drop-ins from similarly named devices that require a different package or design migration.

RFQ যোগাযোগ
XC4VLX15-10FF676I - 320-I/O Virtex-4 LX FPGA | AMD
XC4VLX15-10FF676I

XC4VLX15-10FF676I - 320-I/O Virtex-4 LX FPGA | AMD

AMD XC4VLX15-10FF676I is a Virtex-4 LX field-programmable gate array with 320 user I/O, 13,824 logic cells, a -10 speed designation, and a 676-pin Flip-Chip Ball Grid Array package. The industrial-temperature suffix I identifies its intended operating class for demanding embedded systems. Its programmable logic fabric supports parallel processing, interface bridging, protocol conversion, and high-speed control functions within a single device. A field-programmable gate array is a semiconductor whose digital logic is configured after manufacture. It belongs to the hierarchy of programmable logic devices, including complex programmable logic devices and FPGAs, and occupies the programmable logic and semiconductor categories. Unlike fixed-function application-specific integrated circuits, an FPGA can be reprogrammed for different architectures, algorithms, and peripheral combinations while retaining the same board-level package. The XC4VLX15 combines 13,824 logic cells with 320 user I/O in a 676-FCBGA package. Its catalog listing identifies 884,736 as an additional device-resource metric. The -10 designation is retained by the comparable ordering variants listed for this family. Industrial-grade availability and high pin density make the device appropriate for complex control systems requiring substantial external connectivity rather than compact low-I/O applications. The device integrates programmable logic with dedicated FPGA resources, allowing parallel datapaths to be implemented without relying on repeated processor instruction execution. The large I/O count supports memory interfaces, high-speed serial links, parallel buses, clock distribution, and multiple peripheral interfaces. Engineers must still validate every external interface against the manufacturer’s pinout files and device constraints before finalizing a high-speed board. Typical applications include industrial automation, telecommunications equipment, video processing, test and measurement systems, communications infrastructure, and embedded control platforms. The 320-I/O capacity is especially useful where several buses, memories, converters, and control signals converge on one FPGA. Its 676-pin FCBGA package supports dense interconnect but requires careful escape routing, adequate PCB microvias, and controlled power delivery around the device. The primary design consideration is package complexity. A 676-FCBGA footprint has a much finer escape-routing requirement than a leaded package, so layer count, via geometry, solder-mask definition, and assembly capability should be reviewed before layout begins. Power, ground, configuration, and high-speed signal integrity should be evaluated together rather than treated as separate routing tasks. This page combines catalog specifications, compatible ordering variants, comparison information, and practical implementation guidance for engineers evaluating the XC4VLX15-10FF676I. Use the manufacturer pinout files and device documentation for the authoritative ball assignment and final design sign-off.

RFQ যোগাযোগ
XC4VLX15-10FFG668C Virtex-4 LX FPGA | AMD Xilinx
XC4VLX15-10FFG668C

XC4VLX15-10FFG668C Virtex-4 LX FPGA | AMD Xilinx

AMD Xilinx XC4VLX15-10FFG668C is a Virtex-4 LX field-programmable gate array with 13,824 programmable logic cells, 320 I/O, and a -10 speed grade, supplied in a 668-pin FCBGA package. The device provides 12,288 logic cells according to family-level Virtex-4 LX specifications and is associated with a maximum internal frequency of 1,028 MHz. Its CMOS implementation is designed for programmable digital logic, parallel processing, high-speed interface bridging, and embedded control applications. A field-programmable gate array, or FPGA, is a reconfigurable digital semiconductor whose logic, interconnect, and I/O resources can be programmed after manufacture. The FPGA hierarchy places this device in the Virtex-4 LX family and within the broader category of programmable logic devices, FPGAs, and digital semiconductors. Unlike a fixed-function application-specific integrated circuit, an FPGA can support multiple hardware functions and accommodate design changes without changing the physical PCB layout. The XC4VLX15 combines 13,824 fabric logic cells with 320 user I/O in a compact FCBGA-668 package. Its -10 speed designation identifies a specific Virtex-4 performance grade, while the 1,028 MHz figure describes the maximum internal frequency associated with the LX-15 family. The 668-pin package supports dense pin assignment and high interconnect density, although its fine-pitch ball-grid construction requires careful PCB layout, inspection, and thermal design. Architecturally, the Virtex-4 LX platform uses selectable logic resources, dedicated hard resources, and high-speed I/O paths for demanding designs. This device is particularly useful where parallelism, flexible data paths, rapid prototyping, or field-update capability are more important than the power efficiency and fixed cost of an ASIC. Implementation decisions should be based on actual timing closure for the selected clock, I/O standards, memory interfaces, and external components. Typical applications include high-speed network packet processing, industrial control and automation, test and measurement systems, telecommunications equipment, signal-processing boards, and embedded video or communications infrastructure. In these systems, the programmable fabric can implement parallel algorithms, protocol bridges, acquisition pipelines, and control logic while the dedicated FPGA resources accelerate suitable workloads. PCB implementation requires a multilayer board with controlled-impedance routing, solid power and ground planes, and short connections between the FPGA, memory, and clock circuitry. Decoupling, independent power rails, via-in-pad structures, and thermal relief should follow the package and device guidance for the selected FPGA. BGA assembly also requires compatible board design rules, X-ray or other inspection, and a controlled rework process. This page organizes the exact orderable MPN, package and resource information, verified sourcing records, speed-grade alternatives, application guidance, and design considerations. It also highlights engineering constraints that are not obvious from the part number alone, including the distinction between the 668-pin and 676-pin Virtex-4 LX packages and the need to validate every mechanical, timing, and thermal requirement before production release.

RFQ যোগাযোগ
XC4VLX15-10FFG668I - 13,824-LC Virtex-4 LX FPGA | AMD
XC4VLX15-10FFG668I

XC4VLX15-10FFG668I - 13,824-LC Virtex-4 LX FPGA | AMD

The AMD XC4VLX15-10FFG668I is a Virtex-4 LX field-programmable gate array with 13,824 logic cells, 320 I/O, and 884,736 RAM bits in a 668-ball FCBGA package. Its 26 mm by 26 mm package is identified as BGA668. The -10 suffix denotes the Virtex-4 LX -10 performance grade, while the trailing I identifies the industrial-temperature product version. A field-programmable gate array is a semiconductor device whose digital logic, interconnect, and memory resources are configured after manufacture. The Virtex-4 LX family belongs to the broader FPGA and CPLD hierarchy and combines configurable logic blocks, block RAM, dedicated input/output resources, and high-speed serial transceivers. This makes the FPGA suitable when a design requires parallel processing, flexible interfaces, or hardware-level adaptation without changing the printed circuit board. The XC4VLX15 provides 13,824 logic cells, 320 user I/O, and 884,736 RAM bits. These resources support concurrent control logic, data processing, packet handling, interface bridging, and programmable signal generation. Its 668-ball FCBGA package provides dense board-level connectivity for high-I/O designs and allows the device to be used with external memory and high-speed interface components when the selected design requires them. The device is based on CMOS FPGA technology and belongs to the Virtex-4 LX architecture. Its logic fabric allows configuration data to define combinational and sequential functions, while dedicated block RAM supports storage-intensive functions. For engineering decisions, the distinction between the 320 I/O and the 668 package balls is important: not every package ball is a user I/O, and the power, ground, configuration, and dedicated-function assignments must be taken from the AMD package pinout files. Typical uses include industrial control and automation, communications infrastructure, instrumentation, embedded signal processing, test equipment, and high-speed networking. The ample logic and I/O resources allow parallel data acquisition, protocol conversion, and supervisory control to be consolidated in one programmable device. A Virtex-4 implementation can also support custom interface logic for legacy peripherals that would otherwise require several supporting devices. PCB implementation requires careful planning for the 26 mm by 26 mm FCBGA land pattern, multilayer escape routing, power and ground distribution, and thermal management. Use the AMD Virtex-4 package device pinout files when assigning balls and checking power rails. Confirm the required configuration device, clocking, decoupling, voltage levels, and high-speed routing before releasing the layout. This product page consolidates the exact package and resource details, replacement analysis, comparison data, and practical implementation guidance. It also distinguishes true same-footprint alternatives from devices that merely use a similar 668-ball package but provide a different FPGA architecture or resource mix.

RFQ যোগাযোগ
XC4VLX15-10FFG676C - 13,824-LCE FPGA | AMD
XC4VLX15-10FFG676C

XC4VLX15-10FFG676C - 13,824-LCE FPGA | AMD

AMD XC4VLX15-10FFG676C is a Virtex-4 LX field-programmable gate array with 13,824 logic cells, 320 I/O, 1,536 configurable logic blocks, and a 676-pin FCBGA package. It combines a 90 nm CMOS implementation with a nominal 1.2 V core supply and a -10 speed grade, making it suitable for demanding parallel processing, interface, networking, communications, and embedded control designs. A field-programmable gate array is a semiconductor whose digital logic and interconnect functions are configured after fabrication. The FPGA category belongs to programmable logic devices and combines the programmability of a microcontroller-based system with parallel hardware acceleration. Within the AMD Virtex-4 product hierarchy, the XC4VLX15 belongs to the LX family, where logic cells, block RAM, dedicated multipliers, input/output capability, and package resources are balanced for general-purpose high-performance logic. The device provides 13,824 logic cells and 1,536 configurable logic blocks for combinational and sequential digital implementation. Its 320 I/O positions support substantial board-level connectivity, while 884,736 embedded RAM bits support buffering, packet storage, and data-plane designs. The 1.2 V core voltage belongs to the lower-voltage programmable-logic environment, requiring the power architecture and decoupling strategy to be planned as an FPGA-specific design rather than as a conventional low-power IC. The -10 suffix identifies the device speed grade within the Virtex-4 LX family. A 676-pin FCBGA provides substantial pin availability but requires a land grid with fine-pitch escape routing and careful via-in-pad or fanout design. Designers should preserve the device's supply, ground, decoupling, configuration, clock, and differential I/O requirements exactly as defined by the Virtex-4 package data and device documentation. Typical uses include network interface controllers, telecommunications line cards, industrial data-acquisition systems, storage controllers, video-processing pipelines, and test equipment. The large logic-cell count and embedded memory make the part useful for parallel datapaths, protocol engines, and fixed-function digital subsystems that would otherwise require several programmable devices or complex discrete logic. The primary design consideration is that a legacy 676-ball FPGA demands disciplined power integrity, thermal planning, configuration management, and PCB manufacturing capability. Validate layer stack-up, solder-mask and paste design, assembly yield, signal integrity, and thermal performance in the exact production stack-up before committing to a high-volume board. This page organizes the device's key engineering facts, compares pin-compatible family options, and translates the FPGA's logic, memory, I/O, speed-grade, and packaging characteristics into practical selection guidance for engineers planning Virtex-4 LX implementations.

RFQ যোগাযোগ
XC4VLX15-10FFG676I - 13,824-Cell 90 nm FPGA | Xilinx
XC4VLX15-10FFG676I

XC4VLX15-10FFG676I - 13,824-Cell 90 nm FPGA | Xilinx

The Xilinx XC4VLX15-10FFG676I is a Virtex-4 LX field-programmable gate array with 13,824 logic cells, 320 user I/O, and a 676-ball FCBGA package. The -10 suffix identifies the performance grade, while the I suffix denotes the industrial temperature option. Built on a 90 nm process with a 1.2 V core supply, this device belongs to the FPGA and CPLD category within programmable logic semiconductors. The Virtex-4 LX architecture combines programmable logic, block RAM, dedicated DSP arithmetic, and programmable I/O in a single monolithic device. This combination makes the XC4VLX15 suitable for parallel signal processing, embedded control, industrial protocol bridging, and high-speed data acquisition. Its 320 I/O provide substantial connectivity for parallel buses, memory interfaces, clock distribution, and multi-channel control logic. Key engineering characteristics include the 90 nm process node, 1.2 V core voltage, 13,824 logic cells, and 320 user I/O. The device uses a 676-BBGA FCBGA package and supports the -10 speed grade. The Xilinx Virtex-4 product family uses configurable logic blocks and selectable I/O standards, allowing a design to combine multiple interface types while retaining deterministic timing within each supported I/O standard. Typical uses include industrial machine vision, test-and-measurement acquisition systems, telecom signal conditioning, embedded DSP pipelines, and communications equipment. Its 320 I/O make it particularly suitable for parallel ADC and DAC interfaces, where many data, clock, and control signals must terminate in one device. The FPGA can also implement protocol converters, timing controllers, and real-time data filters. PCB implementation requires careful treatment of the 676-ball BGA footprint. Signal-integrity and power-delivery design should follow the manufacturer's package pinout files, including prescribed ball assignments for configuration pins, dedicated pins, and supply connections. Use the AMD Virtex-4 package device pinout files when assigning tracks and verifying every ball location. Because this is a legacy programmable-logic device, engineers should confirm toolchain support, bitstream compatibility, I/O voltage requirements, and end-of-life purchasing status before starting a new design. Existing industrial and telecommunications platforms can retain a stable upgrade path by using the same XC4VLX15 device family and package variants rather than redesigning the board.

RFQ যোগাযোগ
XC4VLX15-10SF363C - 13,824-Cell Virtex-4 LX FPGA | Xilinx
XC4VLX15-10SF363C

XC4VLX15-10SF363C - 13,824-Cell Virtex-4 LX FPGA | Xilinx

The Xilinx XC4VLX15-10SF363C is a Virtex-4 LX field-programmable gate array with 13,824 logic cells, 240 inputs, 240 outputs, and a 363-ball FCBGA package. It uses 90 nm CMOS technology and is associated with a 1.2 V supply. The -10 suffix denotes the speed grade, while SF363 identifies the 363-ball package and the C suffix identifies the commercial temperature grade. These characteristics make the device suitable for high-performance programmable logic, embedded processing, networking, communications, industrial control, and test-equipment designs. A field-programmable gate array, or FPGA, is a semiconductor whose logic, interconnect, and programmable resources are configured after manufacture. Within the product hierarchy, an FPGA is a programmable logic device and a semiconductor integrated circuit. Unlike a fixed-function application-specific integrated circuit, an FPGA can be reconfigured to implement parallel processing, protocol handling, interface bridging, signal processing, and control logic. The Virtex-4 LX family is designed for balanced logic density, block RAM, dedicated multipliers, and high-speed serial I/O capabilities. The XC4VLX15 provides 13,824 logic cells and supports 240 input and 240 output terminals in a 363-ball FCBGA package. The listed logic density and I/O count make it useful for designs that need substantial parallel throughput without moving to a larger device. Its 1.2 V core-supply operation is suitable for modern FPGA power architectures when paired with correctly designed regulators, bypass capacitors, and I/O voltage planning. The commercial grade is associated with a 0 °C to 85 °C operating-temperature range. The device is manufactured using 90 nm CMOS technology and is identified as a -10 speed-grade member. This places it in the Virtex-4 LX performance class for designs that require predictable timing closure at moderate logic density. Exact clock-rate, memory, multiplier, and power specifications must be selected from the manufacturer documentation for the specific design configuration because FPGA performance depends on the implemented logic, clocking, I/O standards, and timing constraints. Typical applications include network interface and packet-processing equipment, industrial automation controllers, communications infrastructure, embedded test systems, and high-speed signal-processing platforms. In each case, the 240 I/O terminals and 13,824 logic cells provide a practical balance between connectivity and programmable logic capacity. Designs requiring embedded hard processors or substantially higher logic density should be reviewed against other FPGA families before schematic capture. PCB implementation should preserve the 363-ball footprint and follow the manufacturer's escape-routing and via-in-pad guidance. Decoupling must be placed directly at the relevant supply balls, while high-speed routing requires short return paths and controlled reference-plane continuity. Because no complete ball map is reproduced here, use the pin-description table in the manufacturer datasheet when assigning power, ground, configuration, clock, and user I/O balls. This page consolidates the exact orderable MPN, package and technology details, source-backed specifications, realistic drop-in alternatives, comparison parameters, and practical implementation guidance. It is intended to help engineers evaluate the XC4VLX15-10SF363C for legacy or ongoing Virtex-4 LX designs without changing the board footprint unnecessarily.

RFQ যোগাযোগ
XC4VLX15-10SF363I - 13,824-Cell FPGA | AMD Xilinx | Industrial
XC4VLX15-10SF363I

XC4VLX15-10SF363I - 13,824-Cell FPGA | AMD Xilinx | Industrial

The AMD Xilinx XC4VLX15-10SF363I is a Virtex-4 LX field-programmable gate array with 13,824 logic cells, 90 nm CMOS technology, a 1.2 V supply, and a speed grade of 10. The device is supplied in a 363-pin FCBGA package measuring 17 × 17 mm. Its combination of parallel programmable logic, block RAM, and DSP resources makes it suitable for embedded systems that require substantial fixed-function acceleration without the complexity of a discrete processor, ASIC, or multi-chip implementation. A field-programmable gate array is a semiconductor device containing configurable logic and interconnect resources. An FPGA sits within the broader hierarchy of programmable-logic semiconductors, combining the parallel performance of hardware with firmware-like design flexibility. The Virtex-4 LX family uses 90 nm CMOS construction and is positioned between general-purpose FPGAs and larger high-performance programmable-logic devices. This makes the XC4VLX15 useful where parallel datapaths, high-speed interface termination, protocol handling, or fixed-function acceleration must coexist on one device. The XC4VLX15 device contains 13,824 logic cells. The same-family documentation identifies 864 Kb of block RAM and 32 DSP slices for the Virtex-4 LX 15 configuration. These resources allow designers to implement parallel filters, control logic, packet processing, signal transformation, and interface bridges in hardware. Block RAM can store lookup tables, packet buffers, or fixed coefficients, while the DSP slices can accelerate multiply-accumulate operations commonly found in digital filtering, signal processing, and fixed-point arithmetic. The “-10” portion identifies speed grade 10, allowing the design to meet the timing requirements associated with that performance class. The device operates from a 1.2 V supply and uses a 363-ball FCBGA package with a reported 0.8 mm ball pitch. Its large BGA land pattern supports numerous high-speed I/O connections, but it also requires careful PCB routing, controlled-reference-plane design, thermal analysis, and assembly-process compatibility. The industrial “I” suffix distinguishes this ordering variant from commercial-temperature variants, while the “SF” ordering code identifies the package and finish configuration used by the device family. Typical applications include industrial control systems, communications infrastructure, video-processing equipment, instrumentation, and embedded signal-processing systems. In each case, the device can consolidate multiple fixed-function blocks into a single programmable platform. Designers can use serial or parallel interfaces to connect processors, memory, converters, and network transceivers, while programmable logic handles protocol conversion, data alignment, buffering, and real-time control. This integration can reduce component count and simplify system architecture when requirements are stable enough to justify programmable logic. The primary design trade-off is package complexity. A 363-pin FCBGA requires a fine-pitch multilayer PCB, suitable solder-mask and paste design, X-ray or other assembly inspection, and careful handling of thermal expansion. Signal-integrity work is equally important because high-speed I/O performance can be affected by return paths, impedance discontinuities, supply noise, and inadequate decoupling. Use the manufacturer’s device pinout, package data, and PCB design guidance when defining the land pattern, power planes, and assembly process. This product record combines the confirmed XC4VLX15-10SF363I device identity, package information, logic-cell count, process technology, supply voltage, and available drop-in ordering variants with practical guidance for FPGA selection, PCB implementation, sourcing, and system integration.

RFQ যোগাযোগ
XC4VLX15-10SFG363C - 13,824-LC Virtex-4 FPGA | AMD
XC4VLX15-10SFG363C

XC4VLX15-10SFG363C - 13,824-LC Virtex-4 FPGA | AMD

AMD XC4VLX15-10SFG363C is a Virtex-4 LX field-programmable gate array with 13,824 logic cells, 240 inputs, 240 outputs, and a maximum clock frequency of 1028 MHz. The device uses 90 nm CMOS technology, operates from a 1.14 V to 1.26 V supply, and is packaged in a lead-free 363-pin FCBGA measuring 17 mm by 17 mm. A field-programmable gate array, or FPGA, is a programmable-logic semiconductor whose configurable lookup tables, routing fabric, block memory, and digital signal processing resources implement digital functions after manufacture. An FPGA belongs to the programmable-logic hierarchy that includes CPLDs, ASICs, processors, and SoCs. It is especially useful when a design needs high parallel throughput, reconfigurable hardware, or dedicated acceleration without the development cost of a custom ASIC. The XC4VLX15 combines 13,824 logic cells with 864 Kb of block RAM and 32 DSP slices. Its 240 input and 240 output positions support interfaces, control logic, and high-speed digital connections. The speed grade 10 designation identifies its performance class, while the commercial temperature range of 0°C to 85°C targets industrial, networking, communications, embedded, and test-equipment systems operating within those limits. Technically, the XC4VLX15 belongs to the Virtex-4 LX architecture and combines programmable logic with dedicated block RAM and DSP48 resources. This mixed architecture allows control-heavy functions, packet processing, filtering, and fixed-point arithmetic to share one device. The 1028 MHz maximum clock figure describes the device’s stated clock capability; practical interface rates remain constrained by I/O standards, board-level timing, external memory performance, and the design’s timing constraints. Typical applications include high-speed network adapters, industrial control and monitoring, communications infrastructure, video and image processing, embedded signal-processing systems, and test-and-measurement equipment. Its 32 DSP slices are particularly useful for filters, transforms, fixed-point arithmetic pipelines, and real-time data conditioning, while 864 Kb of block RAM supports buffering, packet storage, and lookup functions. PCB design requires careful attention to the 363-ball FCBGA footprint, multilayer escape routing, power and ground distribution, and decoupling. The 1.14 V to 1.26 V operating range defines the core-supply envelope, so voltage regulation, plane geometry, thermal management, and high-speed signal integrity should be validated against the device guidance before layout release. This product page combines the device architecture, package constraints, commercial sourcing guidance, family-level replacement analysis, and practical design considerations to help engineers evaluate the XC4VLX15-10SFG363C before integrating it into an FPGA-based system.

RFQ যোগাযোগ
XC4VLX15-10SFG363I - Virtex-4 LX FPGA | AMD Xilinx
XC4VLX15-10SFG363I

XC4VLX15-10SFG363I - Virtex-4 LX FPGA | AMD Xilinx

The AMD Xilinx XC4VLX15-10SFG363I is a Virtex-4 LX field-programmable gate array with 13,824 logic cells, 240 user I/O, and a 10 speed grade, housed in a 363-pin FCBGA package. The industrial-temperature device operates with a junction-temperature range of -40°C to 100°C and uses 90 nm FPGA technology. A field-programmable gate array is a semiconductor device whose digital logic, interconnect, and dedicated hardware blocks are configured after manufacture. The Virtex-4 LX platform belongs to the FPGA hierarchy, where an FPGA combines configurable logic, block RAM, programmable I/O, dedicated arithmetic resources, and parallel processing in one device. This integration allows a system designer to implement control, datapath, interface, and protocol functions without using a fixed-function ASIC. The XC4VLX15-10SFG363I provides 13,824 logic cells and 240 I/O, making it suitable for designs requiring substantial parallel logic and broad external connectivity. Its -10 speed designation identifies the performance grade, while the G suffix denotes the industrial-temperature option. The package data identifies RoHS compliance and lead-free construction. Dedicated FPGA resources also make the device relevant to parallel data acquisition, signal processing, communications, industrial control, and embedded accelerator workloads. The 90 nm Virtex-4 LX implementation balances programmable functionality with relatively high-density logic integration. In a design, the FPGA fabric can execute parallel pipelines or state machines while block RAM buffers samples and I/O banks connect the device to external interfaces. Configuration determines the final circuit, but the physical design still requires correct power sequencing, clocking, decoupling, configuration-memory connection, and signal-integrity control to achieve reliable operation. Typical uses include industrial automation controllers, communications equipment, data-acquisition systems, test and measurement platforms, embedded signal processors, and control systems with numerous external connections. The 240 I/O count is especially valuable when a design must bridge multiple buses, capture parallel data, drive displays, or interface with external converters and memories. Parallel workloads can also exploit the FPGA fabric more effectively than a sequential microcontroller architecture. For layout, follow the manufacturer’s pinout, power-decoupling, and ball-assignment instructions exactly because FCBGA routing and configuration requirements are package-specific. Place bypass capacitors close to the relevant supply balls, provide a low-impedance ground reference, and validate high-speed interfaces with controlled impedance. Because configuration and startup behavior are integral to FPGA operation, review the device programming guidance before releasing the board layout. This page combines the principal device characteristics, package-specific sourcing information, drop-in ordering alternatives, application guidance, and engineering design notes. It also distinguishes temperature and speed-grade variants so engineers can identify a valid replacement without confusing a different package or functional implementation with a true board-level substitute.

RFQ যোগাযোগ