উপশ্রেণী

পণ্য (44,000+)

XC4VLX25-11FFG676C - 24,192-Cell FPGA | AMD Xilinx
XC4VLX25-11FFG676C

XC4VLX25-11FFG676C - 24,192-Cell FPGA | AMD Xilinx

The AMD Xilinx XC4VLX25-11FFG676C is a Virtex-4 LX field-programmable gate array with 24,192 logic cells, 448 user I/O pins, and 1,327,104 bits of block RAM in a 676-pin FCBGA package. It uses 90 nm CMOS technology, operates from a 1.2 V core supply, and is organized into 2,688 configurable logic blocks. The -11 designator identifies its performance grade, while FFG676C specifies the 676-ball fine-pitch FCBGA package and commercial temperature designation. A field-programmable gate array, or FPGA, is a semiconductor whose digital logic, interconnect, and programmable I/O behavior are configured after manufacture. FPGA technology sits within the broader programmable-logic hierarchy and provides parallel hardware implementation of control, data-processing, communications, and signal-generation functions. Unlike a fixed-function application-specific integrated circuit, an FPGA can be reprogrammed for multiple designs and design revisions, which is valuable in legacy control systems, industrial equipment, communications infrastructure, and test platforms. Key device resources include 24,192 logic cells, 2,688 configurable logic blocks, 448 user I/O pins, and 1,327,104 bits of RAM. The 448 I/O pins provide extensive parallel connectivity for external memory, data buses, clocks, control signals, and high-speed interfaces. The large 676-ball FCBGA package also supports power delivery and signal routing requirements that cannot be met as economically by a small leaded or small-outline package. The XC4VLX25 belongs to the Virtex-4 LX architecture and is manufactured using 90 nm CMOS technology. Its logic fabric can implement combinational and sequential digital functions, while dedicated block RAM supports buffering, packet storage, data alignment, and other finite-state storage. The core supply is 1.2 V, with additional power rails required by the selected I/O standards. Configuration, clocking, power sequencing, and pin constraints must be managed through the associated Xilinx ISE design flow. Typical uses include industrial automation controllers, communications equipment, video-processing subsystems, instrumentation platforms, legacy network appliances, and embedded systems that require deterministic parallel logic. The device is particularly appropriate when an existing design uses the Virtex-4 LX package, pinout, and bitstream ecosystem and needs an equivalent source for an exact MPN. For a new PCB, use the official Virtex-4 package pinout file when assigning every ball, power rail, configuration signal, and I/O standard. Check the selected I/O voltage domains against the bank requirements before finalizing the schematic. Because this is a legacy FPGA, tooling availability, configuration memory, and component lifecycle should be reviewed before committing a new production design. This page organizes the device's FPGA resources, package information, direct replacement options, and practical engineering considerations into one engineering reference. It also distinguishes genuine same-package replacements from devices that use different ball counts or footprints, helping prevent an electrically similar part from being selected for a PCB that requires pin-to-pin compatibility.

RFQ যোগাযোগ
XC4VLX25-11FFG676I - 24,192-LC Virtex-4 LX FPGA | AMD
XC4VLX25-11FFG676I

XC4VLX25-11FFG676I - 24,192-LC Virtex-4 LX FPGA | AMD

The AMD XC4VLX25-11FFG676I is a Virtex-4 LX field-programmable gate array with 24,192 logic elements, 2,688 configurable logic blocks, 448 user I/O pins, and 1,327,104 embedded RAM bits in a 676-ball FCBGA package. It is built on 90 nm CMOS technology and belongs to the FPGA & CPLD product hierarchy, where reprogrammable FPGA logic supports hardware customization, parallel processing, high-speed I/O, and system integration. A field-programmable gate array is a programmable-logic semiconductor in which configurable logic blocks, block RAM, programmable I/O, and dedicated resources implement a digital system. An FPGA sits above fixed-function logic devices and below software-programmable processors, combining hardware-level timing control with the flexibility of configuration files. The Virtex-4 LX architecture is appropriate when a design needs substantial parallel logic, high-speed serial connectivity, dedicated memory, or configurable pin assignments. The principal resources include 24,192 logic elements and 2,688 LABs/CLBs, with 1,327,104 total RAM bits available for buffers, lookup tables, control logic, or data processing. The device exposes 448 user I/O pins. Its -11 designation identifies a 11 speed grade for designs that require faster timing performance than the base grade while retaining the same XC4VLX25 device architecture. The XC4VLX25 device combines programmable logic with dedicated hard resources for high-speed connectivity and clocking. This architecture allows multiple independent data paths to operate concurrently, making it useful for telecommunications, industrial automation, aerospace, defense, and high-end computing systems. The 676-ball FCBGA package also provides a large connection count for high-density designs requiring extensive board routing. Typical applications include telecom line cards, packet-processing systems, industrial control platforms, aerospace and defense electronics, test equipment, and high-throughput computing modules. In these systems, the FPGA can implement parallel algorithms, protocol bridges, data acquisition pipelines, and interface adaptation while preserving field-updatable configuration flexibility. PCB implementation requires careful power, thermal, and signal-integrity planning. The FCBGA package has many power and ground balls, so layer transitions and via stitching must follow the AMD package pinout and board-design guidance. Designers should validate the selected bitstream, supported I/O standards, pinout, power sequencing, and board constraints before production release. This page combines the device's resource characteristics, verified package information, drop-in upgrade considerations, and practical design guidance. It helps engineers distinguish fully compatible XC4VLX25 package and speed-grade options from devices that require PCB changes, bitstream changes, or complete platform migration.

RFQ যোগাযোগ
XC4VLX25-11SF363C - 24,192-Cell Virtex-4 LX FPGA | AMD
XC4VLX25-11SF363C

XC4VLX25-11SF363C - 24,192-Cell Virtex-4 LX FPGA | AMD

The AMD XC4VLX25-11SF363C is a Virtex-4 LX field-programmable gate array with 24,192 logic cells, 240 user I/O, and a 363-ball FCBGA package. It uses 90 nm CMOS technology, operates from a 1.2 V core supply, and is offered in the -11 speed grade for designs requiring a balance of logic density, I/O capacity, and performance. The SFC363 package identifies the commercial-temperature 363-ball fine-pitch ball-grid-array configuration. A field-programmable gate array is a programmable digital semiconductor that combines configurable logic, registers, block RAM, dedicated input/output resources, and programmable interconnect blocks on one device. Within the product hierarchy, the XC4VLX25 is an FPGA within the Virtex-4 LX family and a member of AMD's broader semiconductor portfolio. Its architecture allows parallel datapath, control, signal-processing, and interface logic to be consolidated into one device rather than assembled from separate logic devices. The principal device characteristics include 24,192 logic cells, 2,688 configurable logic blocks, 240 user I/Os, 90 nm CMOS construction, and a nominal 1.2 V supply. The -11 suffix denotes the device speed grade, while SF363 identifies the package and commercial temperature configuration. These features make the XC4VLX25 suitable for communications, industrial control, test equipment, embedded processing, and high-density digital interface systems requiring substantially more parallel logic than small CPLDs. The Virtex-4 LX architecture supports programmable interconnect, block RAM, dedicated DSP resources, and selectable I/O standards. Engineers can distribute clocking, use dedicated input and output resources, and implement parallel signal-processing or packet-handling functions. Because this is an established FPGA family, design tools and intellectual-property ecosystems are mature; however, new designs must account for the device's legacy process, large BGA package, power characteristics, and end-of-life migration considerations. Typical deployments include telecom line-card control, video and image-processing pipelines, industrial automation, instrumentation, storage interfaces, and embedded communications gateways. The 240 available I/Os make the device particularly useful for systems combining multiple buses, parallel data acquisition, clock distribution, and on-chip memory. A clock-enabled serial transceiver is also included for high-speed point-to-point links in suitable configurations. PCB implementation requires careful power-plane design, decoupling, controlled impedance routing, and thermal analysis. The 363-ball FCBGA package requires X-ray inspection and appropriate PCB assembly capability, while power sequencing must follow the device's configuration and startup requirements. Engineers should preserve the documented pinout, decoupling network, and voltage tolerances, and should not assume that a higher-speed grade is a complete replacement unless its timing, temperature grade, and bitstream compatibility are confirmed. This product page combines the exact XC4VLX25-11SF363C identification, package details, family specifications, sourced replacement guidance, application guidance, and practical design considerations. It also distinguishes true same-footprint upgrade options from broader FPGA migrations, helping engineering teams preserve an existing 363-ball board when possible or plan a deliberate redesign when legacy-device constraints dominate.

RFQ যোগাযোগ
XC4VLX25-11SF363I - 24,192-Cell FPGA | AMD Xilinx
XC4VLX25-11SF363I

XC4VLX25-11SF363I - 24,192-Cell FPGA | AMD Xilinx

The AMD Xilinx XC4VLX25-11SF363I is a Virtex-4 LX field-programmable gate array with 24,192 logic cells, 240 I/O, and a 363-pin FCBGA package. It operates from a 1.2 V core supply, provides 1,296 Kbit of block RAM, and includes 48 DSP slices for parallel signal-processing and fixed-point arithmetic. The -11 speed grade is intended for designs requiring the performance level associated with this Virtex-4 LX configuration. A field-programmable gate array, or FPGA, is a programmable logic device in which digital circuits are configured through a programmable logic array. Unlike a fixed-function application-specific integrated circuit, an FPGA can be reprogrammed during design, prototype, and production phases. Within the device hierarchy, the XC4VLX25-11SF363I belongs to the FPGA and CPLD class of programmable-logic semiconductors, specifically the Virtex-4 LX product family. The XC4VLX25 device contains 10,752 adaptive logic modules organized into 2,688 configurable logic blocks. Its 1,296 Kbit of block RAM supports buffering, packet storage, lookup tables, and moderate-width data paths without relying on external memories. Forty-eight DSP slices accelerate multiply, accumulate, filtering, and signal-processing operations. The listed maximum operating frequency is 1,205 MHz, although practical system performance depends on logic depth, routing, memory interfaces, speed grade, and board constraints. The SF363 package provides 240 user I/O in a 363-terminal FCBGA configuration measuring 17 mm by 17 mm. This high pin count supports wide parallel buses and multiple high-speed interfaces, while demanding careful ball-grid assignment, multilayer PCB construction, dense escape routing, and adequate thermal design. The device uses CMOS technology fabricated on a 90 nm process, combining substantial logic density with a mature programmable-logic architecture. Typical uses include industrial control, telecommunications aggregation, instrumentation, signal processing, communications infrastructure, and embedded systems requiring programmable parallelism. The Virtex-4 LX fabric is especially useful where a design must balance logic density, block RAM, DSP resources, high I/O count, and field programmability without committing to a custom ASIC mask set. A practical design constraint is power and signal integrity. The 1.2 V core and numerous high-speed I/O require multilayer power planes, local decoupling, controlled-impedance routing, and careful separation between clocks, data buses, and sensitive analog interfaces. Configuration storage, startup behavior, bank supply requirements, and the complete 363-ball pin map should be checked against the manufacturer datasheet before schematic capture or PCB release. This product record combines the device identity, package characteristics, verified resource counts, same-package alternatives, pricing status, and engineering guidance into one implementation-oriented reference. It is intended to support footprint planning, replacement assessment, resource budgeting, and FPGA architecture selection before the design moves to detailed schematic and layout work.

RFQ যোগাযোগ
XC4VLX25-11SFG363I - 24K-Cell Virtex-4 LX FPGA | AMD
XC4VLX25-11SFG363I

XC4VLX25-11SFG363I - 24K-Cell Virtex-4 LX FPGA | AMD

The AMD XC4VLX25-11SFG363I is a Virtex-4 LX field-programmable gate array with 24,192 logic cells, 240 I/O sites, and a 363-pin FCBGA package. It uses 90 nm CMOS fabrication technology and is identified with a 1.2 V core supply. The device belongs to the XC4VLX25 device family and targets systems requiring parallel programmable logic, high-speed I/O, embedded block RAM, and dedicated DSP resources in one integrated device. A field-programmable gate array is a semiconductor device whose logic functions are defined by loading a configuration bitstream rather than by a fixed mask programmed during fabrication. Within the product hierarchy, an FPGA is a programmable-logic device and a configurable semiconductor. The Virtex-4 LX family combines general-purpose programmable logic with block RAM, dedicated DSP resources, SelectIO technology, and clock-management resources for communications, industrial control, image processing, and embedded signal-processing systems. Key features include 24,192 programmable logic cells, 240 user I/O, a 1.2 V core architecture, and 90 nm CMOS process technology. The -11 designation identifies the device speed grade, SFG363 identifies the 363-ball flip-chip BGA package, and the I suffix identifies the industrial temperature option. The FPGA integrates multiple configurable logic and memory resources, allowing substantial parallel processing and interface logic to be consolidated in a single package. The XC4VLX25 combines programmable logic blocks with dedicated arithmetic resources and block RAM. This architecture supports parallel datapaths that are useful for filtering, waveform conversion, communications framing, protocol handling, and control logic. The 240 I/O count provides substantial board-level connectivity, while the large FCBGA package accommodates the device's power, ground, configuration, and differential I/O requirements. Exact pin assignments, bank voltages, and I/O standards must be selected from the package pinout and supported-device tables in the manufacturer datasheet. Typical applications include industrial automation, telecommunications line cards, test-and-measurement instrumentation, high-speed data acquisition, digital signal processing, video-processing modules, and embedded communications controllers. The device is especially suitable where parallel processing, deterministic configuration, and a high pin count are more important than minimizing package size or system cost. Legacy designs can also use the same FPGA family as a board-level upgrade path when design constraints permit. For a new PCB, plan power delivery as multiple voltage domains, validate every I/O standard against the selected bank voltage, and keep sensitive configuration and clock routing away from noisy digital paths. Because this is a large leaded FCBGA, inspection, solder-paste volume, thermal management, and board warpage control are essential. Before adopting it for new production, verify lifecycle status, tool-chain support, and availability through the Request a Quote form on this page. This page combines the exact package and logic-cell details with same-footprint speed-grade alternatives, interface-oriented application guidance, and practical PCB and migration considerations. These engineering context fields help distinguish a true drop-in replacement from a merely similar Virtex-4 part and make the selection process more useful than a basic distributor listing.

RFQ যোগাযোগ
XC4VLX25-12FF668C - 24,192-Cell FPGA | AMD | 668-FCBGA
XC4VLX25-12FF668C

XC4VLX25-12FF668C - 24,192-Cell FPGA | AMD | 668-FCBGA

The AMD XC4VLX25-12FF668C is a Virtex-4 LX field-programmable gate array with 24,192 logic cells, 448 I/O, a -12 speed grade, and a 668-pin FCBGA package. The device uses 90 nm CMOS technology and is designed for logic-intensive digital systems requiring programmable parallel processing, high-speed interfaces, and deterministic hardware functions. A field-programmable gate array, or FPGA, is a reconfigurable semiconductor in which logic and interconnect resources are programmed after manufacture. Within the product hierarchy, an FPGA is a programmable logic device and a digital integrated circuit. Unlike a fixed-function application-specific integrated circuit, an FPGA can implement parallel data paths, control logic, protocol interfaces, and signal-processing functions in one configurable device, shortening development cycles and allowing field updates when the system configuration permits. The XC4VLX25 combines 24,192 logic cells with 2,688 configurable logic blocks, 448 user I/O, and a maximum stated clock frequency of 1,205 MHz. Its 90 nm CMOS construction and 1.2 V core supply suit demanding communications, networking, industrial control, image processing, and test-equipment designs. The -12 designation identifies its device speed grade, while the FF668 package code identifies the 668-pin FCBGA configuration. Its architecture allows multiple hardware pipelines to operate concurrently, making the FPGA suitable for deterministic data acquisition, protocol termination, traffic management, and custom accelerator functions. The 448 I/O resources provide substantial connectivity for external memory, clocks, controls, and high-speed interfaces. As with other large FPGAs, achievable system performance depends on pin assignment, clocking, memory implementation, signal integrity, power delivery, and the selected I/O standard. Typical applications include network interface controllers, industrial automation controllers, video-processing pipelines, communications equipment, and embedded test systems. In each case, the device can combine control logic and parallel datapaths while providing deterministic response times. The 668-pin FCBGA package also requires careful PCB layout because its dense ball array and high-speed connections demand controlled impedance, clean power distribution, and robust thermal design. For a new design, validate the complete I/O budget and pin assignments in the AMD pinout file before schematic capture. Route clocks independently from data paths, provide adequate decoupling, and keep sensitive inputs away from high-current switching nodes. Also confirm the selected I/O voltage domains, memory-interface topology, termination requirements, and power-sequencing conditions during system validation. This page combines the exact device identity, verified technical attributes, drop-in migration options, application guidance, and PCB-oriented design notes to support device selection and lifecycle planning. It also distinguishes exact-footprint alternatives from broader FPGA substitutions so engineers can evaluate replacement risk before modifying a released design.

RFQ যোগাযোগ
XC4VLX25-12FFG668C - 24192-LC -12 FPGA | AMD Xilinx
XC4VLX25-12FFG668C

XC4VLX25-12FFG668C - 24192-LC -12 FPGA | AMD Xilinx

The AMD Xilinx XC4VLX25-12FFG668C is a Virtex-4 LX field-programmable gate array with 24,192 logic cells, 448 I/O, and 2,688 configurable logic blocks in a 668-ball FCBGA package. Built on 90 nm CMOS technology, this -12 speed-grade device targets high-density logic, telecommunications, networking, industrial control, and defense systems. Its 1.2 V core supply operates from 1.14 V to 1.26 V, while the commercial-grade temperature range is 0 °C to 85 °C. A field-programmable gate array is a programmable digital integrated circuit in which configurable logic blocks, programmable interconnect, and dedicated input/output resources implement application-specific circuits after manufacture. Within the broader semiconductor hierarchy, an FPGA belongs to the programmable-logic family and occupies the space between fixed-function ASICs and software-programmable processors. This makes it especially useful where parallelism, high I/O density, deterministic hardware timing, and field-updatable functionality are required. Key device characteristics include 24,192 logic cells organized into 2,688 configurable logic blocks, 448 user I/O, and approximately 1.3 Mb of block RAM. The -12 designation identifies the highest-performance Virtex-4 speed grade, while FFG668 specifies the 668-ball package and C identifies the commercial temperature class. The 90 nm ASMBL-oriented implementation supports high clocking performance and substantial general-purpose logic capacity in a single package. The device combines programmable logic fabric with block RAM, dedicated input/output resources, and on-chip clocking and configuration capabilities. Its large I/O count allows designers to connect external memories, network PHYs, converters, capture devices, and high-speed interfaces without relying on external glue logic. Compared with a smaller FPGA in the same family, the XC4VLX25 provides more logic and I/O while retaining the architectural advantages of the Virtex-4 LX platform. Typical applications include telecommunications line-card and switching equipment, industrial automation controllers, high-throughput network interfaces, radar and signal-processing modules, test-and-measurement platforms, and embedded systems that require hardware-assisted parallel processing. The device is particularly appropriate for legacy systems that were designed around the Virtex-4 LX family and require a second-source or lifecycle-continuation path. The primary design consideration is package continuity. The XC4VLX25-12FFG668C uses a 668-ball FCBGA footprint with fine interconnect pitch, so board layout, solder-mask definition, and assembly process must match the package drawing exactly. Use the AMD package pinout files and the device data sheet before routing power, configuration pins, and high-speed I/O. This page combines device specifications, lifecycle-relevant cross references, drop-in alternatives, and application guidance to support component selection, PCB compatibility checks, and sourcing decisions for the XC4VLX25-12FFG668C.

RFQ যোগাযোগ
XC4VLX25-12FFG676C - Virtex-4 LX FPGA, 24192 LUTs, 448 I/O | AMD
XC4VLX25-12FFG676C

XC4VLX25-12FFG676C - Virtex-4 LX FPGA, 24192 LUTs, 448 I/O | AMD

The AMD XC4VLX25-12FFG676C is a Virtex-4 LX field programmable gate array built on 90 nm CMOS, providing 24,192 logic cells organized in 2,688 CLBs with 1,327,104 bits of block RAM and 448 user I/O in a 676-ball plastic flip-chip BGA (FCBGA) package. The device runs from a 1.2 V core supply (1.14 V to 1.26 V) and is specified to a 0 °C to 85 °C junction temperature range in the commercial C grade. A field programmable gate array is a reconfigurable digital integrated circuit whose logic, interconnect and memory blocks are programmed after manufacture. Within the semiconductor hierarchy an FPGA sits above a fixed-function ASIC as a programmable alternative, and within the FPGA family the Virtex-4 LX device targets general-purpose high-performance logic, DSP and embedded processing rather than extreme density or lowest cost. Key features of this device include 24,192 logic cells and 2,688 CLBs for wide datapath and control-logic implementation, 1,327,104 bits of block RAM for buffered packet or video line storage, 448 user I/O for high-pin-count external interfaces, and a maximum clock frequency of approximately 1205 MHz in the -12 speed grade. The -12 designation denotes the middle speed grade of the Virtex-4 LX family, balancing performance against static power in industrial and commercial equipment. Architecturally, the device uses 8-input lookup table logic elements with dedicated carry chains, distributed RAM, and dedicated DSP48 arithmetic slices, all linked by programmable routing over column-based interconnect. Multiple on-chip regulators supply the internal core, block RAM and I/O banks, so a single 1.2 V rail family covers core, auxiliary and I/O supplies. Because a 676-ball FCBGA has thousands of fine-pitch balls, this part is intended for multilayer boards with via-in-pad and careful escape-routing techniques. Typical applications include telecom line-card and cross-connect equipment, network interface and packet-processing line cards, industrial control and data-acquisition systems, video and image processing pipelines, storage and SAS controllers, and test-and-measurement instrumentation with high-speed serial links. When laying out a board around this FPGA, follow the Virtex-4 package and pinout specification for ball assignment, keep unused VCCO and VCC balls connected as shown in the guidance, and provide clean decoupling on every supply rail. Because the -12 grade is specified to 85 °C junction temperature, derate output-current and speed budgets in hot enclosures or specify an industrial-grade counterpart instead.

RFQ যোগাযোগ
XC4VLX25-12SF363C - 24,192-LC FPGA | AMD Xilinx
XC4VLX25-12SF363C

XC4VLX25-12SF363C - 24,192-LC FPGA | AMD Xilinx

The AMD Xilinx XC4VLX25-12SF363C is a Virtex-4 LX field-programmable gate array with 24,192 logic cells, 2,688 configurable logic blocks, and 240 I/O sites in a 363-pin FCBGA package. It uses a 90 nm CMOS process, operates from a nominal 1.2 V core supply, and belongs to the -12 commercial speed grade, which AMD identifies as the highest-performance Virtex-4 grade. A field-programmable gate array is a programmable digital semiconductor in the FPGA and programmable-logic hierarchy. Unlike a fixed-function application-specific integrated circuit, an FPGA combines configurable logic blocks, programmable interconnects, block RAM, dedicated input/output resources, and embedded hard processors. Its configuration architecture allows one PCB design to support multiple logic functions through a bitstream, making Virtex-4 LX devices useful where performance, interface flexibility, and product differentiation must coexist within a high-pin-count package. The 24,192 available logic cells provide substantial parallel-processing capacity, while the 2,688 configurable logic blocks support pipelined datapaths, control logic, protocol bridges, and signal-processing functions. The device offers up to 240 user I/O sites, depending on the exact pin allocation and configuration. Its 363-FCBGA package is specified as 17 x 17 mm and uses surface-mount assembly, allowing dense connections between the FPGA and external memory, transceivers, clocks, and high-speed interfaces. The XC4VLX25 belongs to the Virtex-4 LX architecture and is manufactured on 90 nm CMOS technology. The -12 suffix identifies the commercial -12 speed grade. Published device information lists a maximum clock frequency of 1205 MHz and a core supply range of 1.14 V to 1.26 V, with 1.2 V nominal. These figures characterize the device family and selected commercial option rather than guaranteeing equivalent performance in every implemented design. Typical applications include telecommunications line-card and switching equipment, industrial control systems, high-throughput data acquisition, test and measurement platforms, embedded video processing, and network interface equipment. The large logic-cell count and I/O availability are particularly useful when parallel data paths must converge on high-speed serial links or external memory. Board design should preserve the manufacturer's recommended power architecture, use appropriate decoupling close to the supply pins, and follow the Virtex-4 packaging and pinout specification for escape routing. Configuration storage, clock distribution, termination, signal-integrity analysis, and thermal-management requirements also need to be evaluated before the package is committed to a multi-layer PCB. This page organizes the key device specifications, credible same-footprint alternatives, package constraints, and practical design considerations in one place. It also distinguishes directly interchangeable speed-grade choices from package-only ordering variants, helping engineers select a Virtex-4 LX device without overlooking bitstream, timing, temperature-grade, or PCB compatibility requirements.

RFQ যোগাযোগ
XC4VLX25-12SFG363C - 24K Logic Cell FPGA | Xilinx
XC4VLX25-12SFG363C

XC4VLX25-12SFG363C - 24K Logic Cell FPGA | Xilinx

The Xilinx XC4VLX25-12SFG363C is a Virtex-4 LX field-programmable gate array built on a 90 nm CMOS process, with 24,192 logic cells, 1,296 Kb of block RAM, 48 DSP slices, and 240 I/Os in a 363-pin FCBGA package measuring 17 x 17 mm. It operates from a 1.2 V core supply and is intended for commercial-temperature applications rated from 0 °C to 85 °C junction temperature. A field-programmable gate array, or FPGA, is a semiconductor whose digital logic, memory, and I/O behavior can be configured after manufacture. The Virtex-4 LX family belongs to the broader FPGA and CPLD hierarchy within programmable logic devices. Its combination of configurable logic, dedicated block RAM, DSP processing resources, and high-density differential and single-ended I/O makes it useful where a fixed logic device would require extensive redesign. Key features include 2,688 configurable logic blocks, 24,192 logic cells, 1,296 Kb of block RAM, and 48 DSP slices. The -12 designation identifies the device's performance grade, while the SFG363 suffix identifies the lead-free 363-pin FCBGA configuration used by this part. The commercial temperature rating supports industrial enclosure, test equipment, communications infrastructure, video processing, and embedded control applications where operating conditions remain within the specified junction range. The Virtex-4 architecture provides programmable logic, RAM, DSP, and I/O resources within one device. At the system level, the FPGA can implement parallel datapaths, protocol bridges, signal processing chains, and control functions while reducing the number of external discrete components. Its 363-pin package also supports high I/O density, but the substantial pin count requires careful escape-routing, via planning, and thermal management on multilayer printed circuit boards. Typical applications include telecommunications line-card interfaces, industrial automation and control, high-speed data acquisition, defense and aerospace subsystems, broadcast video processing, and embedded test systems. For designs using multiple power rails, careful sequencing is required. For designs migrating from Virtex-4 to a newer FPGA family, PCB changes and design-tool migration may be necessary even when the logical function remains similar. Place decoupling capacitors close to the power and ground pins, preserve the manufacturer's recommended ball assignments, and route high-speed differential pairs as controlled-impedance nets. Confirm the complete pinout, configuration requirements, clocking limits, and I/O standards against the Virtex-4 packaging and pinout specification before releasing the PCB layout. This page combines the XC4VLX25-12SFG363C's key architecture, package, qualification, pricing, and lifecycle details with compatible speed-grade considerations, practical PCB guidance, and application-focused comparisons for engineers evaluating this legacy Virtex-4 LX design.

RFQ যোগাযোগ
XC4VLX40-10FF668C - 41,472-Cell Virtex-4 LX FPGA | AMD
XC4VLX40-10FF668C

XC4VLX40-10FF668C - 41,472-Cell Virtex-4 LX FPGA | AMD

The AMD XC4VLX40-10FF668C is a Virtex-4 LX field-programmable gate array with 41,472 logic cells, 448 I/O positions, and a 668-ball FCBGA package. It uses CMOS fabrication technology and a 1.2 V core supply, while the -10 speed grade defines the target performance class. The device is designed for embedded systems requiring programmable parallel processing, high-speed connectivity, dedicated block RAM, and configurable DSP resources in a single integrated circuit. A field-programmable gate array is a digital semiconductor whose logic, interconnect, memory, and signal-processing blocks are configured after manufacture. In the product hierarchy, an FPGA is a programmable logic device within the broader semiconductor category. Virtex-4 LX devices combine configurable logic blocks with block RAM and DSP48 resources, allowing parallel algorithms, protocol interfaces, control logic, and data processing to be implemented in one device. The XC4VLX40 provides 41,472 logic cells and 448 I/O positions in a 668-FCBGA package measuring 27 mm by 27 mm. Its CMOS implementation operates from a 1.2 V core supply. The -10 designation identifies the device speed grade, providing a performance-oriented option for clocked datapaths and communication systems. Detailed electrical characteristics, configuration requirements, memory capacities, and supported I/O standards should be selected from the manufacturer datasheet tables using the exact ordering code. The Virtex-4 LX architecture is appropriate when several independent processing paths must operate concurrently. Configurable logic supports datapath control, while dedicated block RAM reduces the need for external memory in buffering, packet storage, and data-capture systems. DSP48 resources can accelerate multiply-accumulate operations involved in filtering, modulation, signal analysis, and fixed-point processing. The large 448-I/O interface also permits direct connection to high-speed memory, transceivers, converters, and board-level buses. Typical uses include telecommunications line-card control, industrial automation, high-speed data acquisition, network packet processing, test equipment, signal processing, and embedded control with substantial parallel logic. For a new Virtex-4 LX design, the XC4VLX40-11 variants may provide a different performance trade-off, while the XC4VLX40-10FFG668C provides the same device speed grade with a lead-free package option. Board design must preserve the BGA escape-routing and power-delivery requirements associated with a 668-ball FCBGA. Configuration storage, startup behavior, decoupling, clock integrity, and I/O voltage compatibility should be validated before schematic sign-off. Use the manufacturer pinout and board-design guidance when assigning every power, ground, configuration, clock, and user I/O connection. This product page combines the verified device identity, package information, lifecycle status, compatible ordering options, parameter comparisons, and practical implementation guidance. It is intended to accelerate initial component selection while preserving the need to check the complete manufacturer datasheet and design-support documents for a production release.

RFQ যোগাযোগ
XC4VLX40-10FF668I - 41,472-Cell -10 Virtex-4 LX FPGA | AMD
XC4VLX40-10FF668I

XC4VLX40-10FF668I - 41,472-Cell -10 Virtex-4 LX FPGA | AMD

The AMD XC4VLX40-10FF668I is a Virtex-4 LX field-programmable gate array with 41,472 logic cells, 1,769,472 RAM bits, and 448 I/O sites, operating from a 1.2 V supply in a 668-pin FCBGA package. The -10 suffix identifies the device speed grade, while the FF668I package designation identifies the 668-ball surface-mount configuration. A field-programmable gate array, or FPGA, is a semiconductor whose digital logic, memory, and I/O behavior is configured after fabrication. The Virtex-4 LX FPGA belongs to the broader FPGA and CPLD hierarchy and combines configurable logic blocks, block RAM, programmable I/O, dedicated multipliers, and high-speed serial transceivers. This makes it suitable for parallel processing, network interfaces, signal processing, control systems, and ASIC-prototype implementations. The XC4VLX40-10FF668I provides 41,472 logic cells organized into 4,608 logic blocks or configurable logic blocks. Its 1,769,472 RAM bits can support buffers, packet memories, lookup tables, filters, and embedded data storage. The device also offers 448 I/O and 176,9472-bit block RAM resources according to its product listing, providing substantial implementation capacity for connected embedded systems. Virtex-4 devices are available in -10, -11, and -12 speed grades, with -12 representing the highest performance grade and -10 the lower-speed option represented by this part. The architecture is based on CMOS FPGA technology and uses configurable logic blocks, dedicated block RAM, arithmetic resources, and programmable input/output structures rather than a fixed instruction set. Its large pin count supports extensive external connectivity and multi-component system integration. Typical applications include industrial networking equipment, telecommunications interfaces, video and image processing, instrumentation, embedded storage controllers, and ASIC prototyping. The 448 available I/O sites are especially useful where a design must connect multiple buses, memories, converters, and clock sources. Designers should also account for the device's large power requirement and the complex power, ground, decoupling, and configuration requirements of a 668-ball BGA implementation. For a new design, verify that the selected -10 speed grade satisfies the timing requirements and that the PCB supports the complete 668-pin FCBGA footprint, thermal design, configuration interface, and memory interfaces. A successful hardware design also requires rigorous signal-integrity analysis for high-speed interfaces and careful power-plane construction around this large, high-pin-count programmable device. This product summary combines the exact MPN identification, package information, logic and memory capacity, speed-grade context, drop-in alternatives, and PCB-oriented engineering guidance. It helps engineers distinguish the industrial -10 device from adjacent speed grades while focusing attention on the actual FPGA resource limits, pin count, power architecture, and board-level implementation constraints.

RFQ যোগাযোগ
XC4VLX40-10FFG668C - 4608-LC Virtex-4 LX FPGA | AMD
XC4VLX40-10FFG668C

XC4VLX40-10FFG668C - 4608-LC Virtex-4 LX FPGA | AMD

The AMD XC4VLX40-10FFG668C is a Virtex-4 LX field-programmable gate array with 4,608 logic cells, 448 logic blocks, and 448 I/Os, packaged in a 668-BBGA FCBGA configuration. It uses CMOS technology, operates from 0°C to 85°C, and is associated with a 1,028 MHz internal frequency in the published product specifications. An FPGA is a programmable semiconductor whose logic, interconnect, and I/O resources are configured after manufacture. The FPGA category sits below programmable logic and above fixed-function integrated circuits: unlike an ASIC, an FPGA permits field upgrades, shorter development cycles, and hardware customization without changing the printed circuit board. The Virtex-4 LX family targets general-purpose logic, high-speed connectivity, DSP, embedded processing, and control systems. The XC4VLX40-10FFG668C combines 4,608 logic cells with 448 logic blocks and 448 I/Os. Its -10 designation identifies the device speed grade, while the 668 suffix denotes the 668-BBGA package configuration. The device is specified for commercial-temperature operation from 0°C to 85°C and uses CMOS logic, making it suitable for controlled industrial, communications, test, measurement, and embedded-control environments. The main engineering value of this device is the combination of programmable logic density, extensive I/O capacity, and a large BGA package in a single Virtex-4 LX implementation. A 448-I/O device can support parallel data interfaces, memory interfaces, control signals, clocks, and high-speed serial I/O resources when the design and selected I/O standards permit them. The 4,608-cell fabric supports concurrent control logic, data-path processing, protocol handling, and application-specific state machines. Typical uses include industrial automation controllers, network interface equipment, data-acquisition systems, test and measurement platforms, embedded video processing, and high-speed communications equipment. In each case, designers benefit from parallel development of firmware-like HDL logic and reusable interface blocks. The 448 available I/Os are particularly useful where a design requires numerous physical connections rather than only a small number of high-speed serial links. PCB implementation requires careful attention to the 668-BBGA footprint, power sequencing, decoupling, via-in-pad strategy, and escape routing. A dense BGA also complicates inspection and rework, so assembly process controls and board-level test planning should be established before layout release. Configuration storage, startup behavior, clock distribution, and I/O voltage compatibility must be verified against the selected board platform. This page organizes the available device specifications, package details, directly related family alternatives, application guidance, and PCB considerations into a practical engineering reference. It also distinguishes genuine same-footprint family alternatives from options that would require a different package, voltage standard, speed grade, or device architecture.

RFQ যোগাযোগ
XC4VLX40-10FFG668I - 41,472-Cell FPGA | Xilinx
XC4VLX40-10FFG668I

XC4VLX40-10FFG668I - 41,472-Cell FPGA | Xilinx

The Xilinx XC4VLX40-10FFG668I is a Virtex-4 LX field-programmable gate array with 41,472 logic elements, 448 user I/Os, a maximum clock frequency of 1028 MHz, and a 1.14 V to 1.26 V supply range. The device is supplied in a 668-pin FCBGA package designated FFG668. A field-programmable gate array is a programmable-logic semiconductor whose configurable logic blocks, I/O blocks, block RAM, and dedicated processing resources can be interconnected to implement digital systems. Within the product hierarchy, an FPGA is a programmable-logic device, a semiconductor, and a configurable alternative to a fixed-function application-specific integrated circuit. Virtex-4 LX devices use the ASMBL architecture to combine configurable logic with high-speed serial connectivity and dedicated hardware resources. The XC4VLX40-10FFG668I provides 41,472 logic elements, 448 I/Os, and a stated internal or maximum clock frequency of 1028 MHz. Its -10 speed designation identifies the performance grade, while FFG668 identifies the 668-ball fine-pitch grid-array package. The industrial-temperature suffix I supports use in extended-temperature equipment. The device is manufactured in 90 nm CMOS technology and operates from a 1.2 V core supply, making it suitable for demanding embedded, communications, networking, and signal-processing designs. Its 668-ball package exposes substantially more interconnect and user I/O than a typical low-cost FPGA package. The package therefore supports designs requiring parallel interfaces, multiple memory interfaces, high-speed clock distribution, and dedicated I/O resources. Designers must follow the AMD package pinout file when assigning balls, planning power rails, and reviewing voltage-versus-current limits for the BGA escape and power-distribution network. Typical uses include high-throughput network interfaces, protocol bridges, video and image processing, industrial control, storage interfaces, and adaptive signal-processing systems. For designs moving from Virtex-4 LX to later AMD FPGA families, migration requires a complete package-ball, voltage, clock, configuration, and design-tool compatibility review; a similar logic-cell count alone does not guarantee a drop-in migration. The primary design consideration is the fine-pitch 668-pin BGA layout. Use the manufacturer package files for land patterns and differential-pair routing, and plan power delivery so that the 1.2 V core rail meets its transient requirements. Confirm configuration memory, clocking, and I/O standards against the device datasheet before schematic release. This page combines exact ordering information, package details, sourced electrical characteristics, drop-in alternatives, and application guidance to support component selection and PCB planning. It also distinguishes the directly relevant same-package options from larger Virtex-4 devices whose different packages prevent drop-in replacement.

RFQ যোগাযোগ
XC4VLX40-11FF1148I - 41,472-Cell Virtex-4 LX FPGA | AMD
XC4VLX40-11FF1148I

XC4VLX40-11FF1148I - 41,472-Cell Virtex-4 LX FPGA | AMD

Advanced Micro Devices XC4VLX40-11FF1148I is a Virtex-4 LX field-programmable gate array with 41,472 logic cells, 4,608 configurable logic blocks, and a maximum internal frequency of 1,028 MHz. The device is manufactured on 90 nm CMOS technology, operates from a 1.2 V core supply, and is packaged in a 1,148-pin FCBGA. Its architecture combines programmable logic, dedicated hardware resources, and high-speed connectivity for logic-intensive embedded systems. An FPGA is a programmable semiconductor whose internal circuit configuration is stored after manufacture. Within the semiconductor hierarchy, an FPGA sits above programmable logic devices and provides parallel hardware implementation through configurable logic blocks, block RAM, digital signal processing resources, programmable input/output blocks, and high-speed serial transceivers. This makes an FPGA suitable when fixed-function logic would require repeated board revisions or when several parallel processing paths must operate at high throughput. Key characteristics of the XC4VLX40 include 41,472 logic cells, 4,608 configurable logic blocks, a 1,028 MHz internal frequency, and a 1,148-pin FCBGA package. The 90 nm CMOS process and 1.2 V supply place it in the Virtex-4 LX generation. The large logic capacity supports demanding datapaths, protocol bridges, network interfaces, embedded processing, and control systems requiring substantially more parallelism than a conventional microcontroller provides. The -11 speed designation identifies the device's performance grade within the Virtex-4 family, while the FF1148 suffix identifies its 1,148-pin FCBGA configuration. The I suffix distinguishes this ordering variant from other temperature-grade versions. Published package information identifies the component as a CMOS FPGA with 640 I/O and an operating temperature range of 0 °C to 85 °C. Designers should verify timing, power, configuration, and thermal requirements against the applicable AMD documentation before releasing a production design. Typical applications include high-speed network packet processing, industrial control and automation, telecommunications interface conversion, test and measurement systems, embedded signal processing, and aerospace or defense equipment. Its 41,472-cell fabric is especially useful for parallel algorithms, wide data aggregation, multiport control, and high-speed serial connectivity. A system requiring deterministic hardware parallelism can implement critical functions directly in FPGA logic rather than sharing a processor across many concurrent tasks. Board design requires careful attention to power integrity, decoupling, clocking, controlled-impedance routing, and thermal management around the large FCBGA. The FPGA package pinout files should be used during symbol creation and PCB layout, while the device configuration interface must be designed for reliable loading and recovery. Differential and high-speed interfaces also require length matching and controlled-impedance routing derived from the board stack-up. This product record combines package, logic-capacity, speed, and connectivity information with engineering guidance for FPGA selection, footprint verification, and implementation. It also identifies confirmed same-package Virtex-4 alternatives and distinguishes their ordering differences so engineers can narrow replacement candidates without overlooking qualification, programming, or temperature-grade requirements.

RFQ যোগাযোগ
XC4VLX40-11FF668C - 4608-Cell Virtex-4 LX FPGA | AMD
XC4VLX40-11FF668C

XC4VLX40-11FF668C - 4608-Cell Virtex-4 LX FPGA | AMD

The AMD XC4VLX40-11FF668C is a Virtex-4 LX field-programmable gate array with 4,608 logic cells, a -11 speed grade, and 668 ball-grid-array terminals. It is packaged in a 668-FBGA configuration and operates from 0°C to 85°C. The device provides programmable logic resources for demanding embedded systems requiring parallel processing, high-speed interfaces, and flexible hardware configuration. A field-programmable gate array is a semiconductor device whose digital functionality is defined after manufacture by loading a configuration bitstream. Within the product hierarchy, an FPGA is a programmable logic device, a type of digital integrated circuit and semiconductor. Virtex-4 LX devices combine configurable logic, block RAM, programmable input/output resources, and dedicated clock-management functions, making them suitable for systems where fixed-function ASIC economics or late hardware changes would be undesirable. The XC4VLX40-11FF668C provides 4,608 logic cells and supports an internal clock frequency listed as 1,028 MHz. Its -11 designation identifies the middle of the three documented Virtex-4 speed grades, which are -10, -11, and -12. The 668-FBGA package exposes 668 terminals and uses a square package form, allowing dense board-level integration without the mechanical footprint of a larger ball-grid array. The -11 speed grade balances performance and operating characteristics for general-purpose FPGA applications. Configuration data determines the implemented digital architecture, while dedicated resources can accelerate storage-intensive and interface-heavy designs. The listed operating range of 0°C to 85°C supports commercial-temperature equipment, while the large 668-terminal package provides substantial I/O and power-distribution connectivity. Typical uses include industrial control and automation, telecommunications equipment, high-speed data processing, test and measurement systems, embedded video infrastructure, and network-interface designs. The FPGA can implement parallel algorithms, protocol bridges, acquisition pipelines, and control logic in one reconfigurable device, reducing the number of surrounding discrete components when system requirements are expected to evolve. Board design requires careful attention to the 668-FBGA layout, including ball assignment, power and ground distribution, decoupling, configuration-interface routing, and thermal management. Use the AMD Virtex-4 package pinout files to assign every ball and verify the selected configuration, clock, and I/O standards before fabrication. Programming and timing closure should be completed with the ISE design tool flow appropriate for the Virtex-4 device family. This product page combines the exact ordering code, key device specifications, package information, same-footprint alternatives, and practical design guidance. It also distinguishes verified electrical and packaging facts from fields that still require confirmation from the AMD documentation, helping engineers plan replacement decisions without changing the PCB land pattern unnecessarily.

RFQ যোগাযোগ
XC4VLX40-11FF668I - 41,472-LC Virtex-4 LX FPGA | AMD
XC4VLX40-11FF668I

XC4VLX40-11FF668I - 41,472-LC Virtex-4 LX FPGA | AMD

The AMD/Xilinx XC4VLX40-11FF668I is a Virtex-4 LX field-programmable gate array with 41,472 logic cells, a -11 speed grade, and a 668-pin FCBGA package. It combines 4,608 configurable logic blocks with 448 I/O positions and operates from a 1.2 V core supply, making it suitable for high-density programmable logic, embedded DSP, and parallel interface systems. The device uses 90 nm CMOS fabrication and is specified for 0°C to 85°C operation. A field-programmable gate array, or FPGA, is a semiconductor whose digital logic, interconnect, and I/O behavior can be programmed after manufacture. The FPGA hierarchy places this device in the Virtex-4 LX family, within the broader field-programmable logic and semiconductor categories. Unlike a fixed-function application-specific integrated circuit, an FPGA can support multiple interface standards, parallel processing architectures, and evolving system requirements without requiring a new physical layout. The XC4VLX40 provides 41,472 logic cells organized into 4,608 configurable logic blocks, with an internal frequency listed as 1,028 MHz. Its 448 I/O positions support substantial board-level connectivity, while the -11 speed designation identifies its performance class within the Virtex-4 lineup. The 668-pin FCBGA package supports dense external connectivity and is intended for multilayer PCB layouts with careful power, ground, and escape-routing planning. Technically, the device is a CMOS FPGA optimized for general-purpose programmable logic rather than a fixed digital signal processor. Its distributed architecture allows designers to instantiate parallel datapaths, state machines, interface bridges, protocol controllers, and custom accelerators. The 1.2 V core supply keeps device-level power requirements lower than many older FPGA architectures, although final board power depends on logic activity, I/O loading, speed grade, and selected I/O standards. Typical applications include industrial control systems, telecommunications interface modules, test and measurement instrumentation, embedded signal-processing systems, and legacy networking equipment. In a telecommunications design, the dense I/O and parallel logic capacity can support multiple buses and data paths. In industrial equipment, programmable logic can implement protocol conversion, acquisition control, and timing functions while retaining the flexibility of FPGA-based field updates. PCB design should follow the AMD package pinout files and the manufacturer’s power, decoupling, and thermal guidance. Place bypass capacitors near the supply pins, provide a low-impedance ground-plane structure, and route high-speed interfaces with controlled length and impedance. Because the 668-pin package has no corresponding diagram in the standard XAIPART package library, verify every ball assignment against the official AMD package file before fabrication. This page combines exact catalog identifiers, package information, application guidance, comparison criteria, and practical design considerations for engineers evaluating the XC4VLX40-11FF668I. It also distinguishes true same-footprint alternatives from parts that merely use a similar FPGA package or belong to a different package size.

RFQ যোগাযোগ
XC4VLX40-11FFG668C - 41,472-Cell Virtex-4 LX FPGA | AMD
XC4VLX40-11FFG668C

XC4VLX40-11FFG668C - 41,472-Cell Virtex-4 LX FPGA | AMD

The AMD XC4VLX40-11FFG668C is a Virtex-4 LX field-programmable gate array with 41,472 programmable logic cells, 448 I/O, a 90 nm process implementation, and a 1.2 V supply in a 668-pin FCBGA package. The -11 speed grade places the device in the middle of the Virtex-4 performance range, while the C suffix identifies the commercial operating-temperature option. A field-programmable gate array, or FPGA, is a programmable digital integrated circuit in which configurable logic blocks and programmable input/output resources implement a digital design. Within the semiconductor hierarchy, an FPGA belongs to the programmable-logic family and provides an ASIC-like hardware function without committing the design to fixed silicon. The Virtex-4 LX family uses Xilinx Advanced Silicon Modular Block architecture and supports general-purpose programmable logic, embedded hard processors, block RAM, and dedicated DSP resources. The XC4VLX40-11FFG668C provides 41,472 logic cells and 448 user I/O in a dense 668-pin flip-chip ball grid array. Its 90 nm CMOS construction and 1.2 V core supply are characteristic of the Virtex-4 generation. The -11 speed grade controls timing performance, while the commercial temperature suffix supports general commercial equipment rather than the extended industrial temperature range. Exact clock, block-RAM, DSP, and I/O standard parameters should be selected from the family configuration table for the specific design. Its architecture is suited to parallel datapaths because thousands of configurable logic blocks can execute multiple operations simultaneously. Dedicated block RAM supports buffering, packet storage, and data-plane queues, while DSP slices accelerate multiply-accumulate operations common in filtering and modulation. This combination allows communications, industrial control, test equipment, and image-processing systems to combine fixed-function blocks with programmable logic in one device. Typical uses include telecom line-card and packet-processing equipment, industrial automation controllers, high-speed data acquisition, radar and signal-processing prototypes, and ASIC prototyping. The 448 I/O resources provide substantial board-level connectivity, although high-speed interfaces require careful assignment of pins, clocking resources, and I/O standards. Legacy designs can also retain an established tool flow and PCB architecture when migrating to a newer FPGA requires board respin. The primary design consideration is thermal management. A large Virtex-4 LX device can consume substantial power under heavy logic or DSP utilization, so designers should evaluate worst-case activity, supply current, copper area, airflow, and adjacent heat sources. Decoupling, independent and globally buffered clock distribution, proper I/O standard selection, and complete timing closure are essential for reliable operation at the -11 speed grade. This page combines device identification, verified package and resource information, drop-in speed-grade options, and application-focused engineering guidance. It also documents which specifications require confirmation against the exact Virtex-4 data sheet, helping designers distinguish a true package-compatible substitution from a merely related FPGA.

RFQ যোগাযোগ
XC4VLX40-11FFG668I - 41,472 Logic Cell FPGA | Xilinx
XC4VLX40-11FFG668I

XC4VLX40-11FFG668I - 41,472 Logic Cell FPGA | Xilinx

The Xilinx XC4VLX40-11FFG668I is a Virtex-4 LX FPGA with 41,472 logic cells, 448 I/O sites, and a 1.2 V core supply in a 668-ball FCBGA package. The -11 speed grade targets general-purpose programmable-logic applications requiring substantial parallel processing capacity, deterministic interface support, and high-density fabric resources. Its industrial temperature suffix, I, identifies the extended-temperature grade, while FFG denotes the lead-free 668-ball package configuration. A field-programmable gate array, or FPGA, is a semiconductor whose logic, routing, and I/O resources are configured after manufacture. An FPGA belongs to the programmable-logic hierarchy, alongside CPLDs, and provides parallel hardware acceleration for signal processing, protocol handling, interface bridging, control, and test systems. Unlike a fixed-function processor, its internal datapaths can execute several operations simultaneously, making it suitable for workloads requiring predictable throughput and low latency. The Virtex-4 LX architecture combines 41,472 logic cells with 176,9472 as listed in the distributor record, along with dedicated block RAM and digital signal-processing resources. The device provides 448 I/O sites and uses a nominal 1.2 V core supply. The -11 speed grade places it between the faster -12 grade and the lower-speed -10 grade, providing a practical balance of performance, power, and design maturity for established Virtex-4 systems. The 668-ball FCBGA package supports dense board-level integration but demands careful escape-routing, via assignment, and power-plane design. High-speed signals require short, impedance-controlled paths, while separate power and ground distribution must minimize supply-noise coupling into configurable logic and memory. Because this family uses an older CMOS process, designers should account for legacy tooling, bitstream compatibility, and end-of-life procurement constraints when starting a new design. Typical applications include telecommunications line-card control, industrial automation, high-speed data acquisition, radar and signal-processing infrastructure, storage controllers, networking equipment, and test-and-measurement systems. The large logic fabric is especially useful when multiple parallel pipelines must operate concurrently, while the 448 I/O sites can connect processors, memory, transceivers, clocks, and high-speed parallel interfaces. For a new PCB, preserve the 1.0 mm ball pitch, define every power and ground ball according to the manufacturer pinout, and validate layer transitions before fabrication. Do not substitute a 1.0 mm FCBGA footprint with a 668-ball FBGA arrangement based only on ball count; package ball maps, keep-out regions, and solder-ball definitions must match exactly. Legacy Vivado or ISE projects should also be checked for the exact device, package, speed grade, and temperature-grade suffix. This page consolidates the exact manufacturer part number, package and logic-density details, sourcing information, drop-in family options, comparison parameters, and practical design guidance. It also distinguishes true temperature-grade alternatives from broader Virtex-4 devices that require a different package, pin map, or design migration.

RFQ যোগাযোগ
XC4VLX40-12FF668C - 41,472 Logic Cell -12 FPGA | AMD
XC4VLX40-12FF668C

XC4VLX40-12FF668C - 41,472 Logic Cell -12 FPGA | AMD

The AMD XC4VLX40-12FF668C is a Virtex-4 LX field-programmable gate array with 41,472 logic elements, 4,608 configurable logic blocks, 448 I/O, and a 1.2 V operating supply in a 668-BBGA package. The -12 designation identifies the highest-performance Virtex-4 speed grade in this family, while the listed internal frequency is 1,028 MHz. A field-programmable gate array is a semiconductor device whose digital logic, interconnect, and I/O behavior are configured after manufacture. The XC4VLX40 belongs to the Virtex-4 LX hierarchy of FPGA and CPLD devices, combining programmable logic blocks, embedded block RAM, dedicated I/O, and clocking resources in one reconfigurable device. This makes it suitable for implementing parallel processing, interface bridging, protocol conversion, and embedded control functions without relying on fixed application-specific logic. Key device characteristics include 41,472 logic elements, 4,608 configurable logic blocks, 18,432 adaptive logic modules, 448 I/O, 1.69 Mbit of embedded memory, and a nominal 1.2 V supply. The -12 grade is specified for the highest performance among the Virtex-4 speed grades. Its commercial operating-temperature range is listed as 0°C to +85°C, making it appropriate for controlled commercial and industrial equipment environments. The device uses a 90 nm CMOS process and a 668-BBGA package. Its four-digit speed code is separate from the FF668 package identifier, so procurement and board design must distinguish the exact XC4VLX40-12FF668C ordering code from other speed grades and package variants. FPGA designs require configuration storage, initialization support, clock distribution, and careful high-speed routing around the BGA device. Typical uses include network interface adapters, test and measurement equipment, industrial protocol bridges, video processing pipelines, and high-throughput digital control systems. The 448 available I/O support connections to external memory, transceivers, converters, and clock sources, while the embedded memory provides dedicated on-chip storage for buffers, lookup tables, and data pipelines. Design planning should begin with the AMD Virtex-4 package pinout files and the device datasheet. Verify every power, ground, configuration, clock, and differential I/O connection against the exact package, provide suitable decoupling and multiple power rails, and confirm that the PCB stack-up supports the device's high-speed routing requirements before releasing the layout. This page combines device specifications, sourcing information, replacement considerations, application guidance, and PCB-level design notes. These engineering details help teams evaluate the XC4VLX40-12FF668C against related Virtex-4 devices while accounting for speed grade, package, thermal conditions, configuration requirements, and design-tool compatibility.

RFQ যোগাযোগ
XC4VLX60-10FF1148I - 59,904-Cell Virtex-4 LX FPGA | AMD
XC4VLX60-10FF1148I

XC4VLX60-10FF1148I - 59,904-Cell Virtex-4 LX FPGA | AMD

The AMD XC4VLX60-10FF1148I is a Virtex-4 LX field-programmable gate array built on a 90 nm CMOS process, providing 59,904 logic cells, 26,624 adaptive logic modules, and 640 user I/O in a 1148-ball FCBGA package. Its 1.2 V core supply and -10 speed designation identify it as a high-performance, general-purpose programmable-logic device for demanding embedded systems. A field-programmable gate array is a semiconductor whose logic and interconnect resources are configured after manufacture. Within the programmable-logic hierarchy, an FPGA combines configurable logic blocks, block RAM, programmable input/output blocks, clocking, and dedicated hard processors into a single device. The Virtex-4 LX family is positioned for high-performance systems requiring substantial parallel processing, flexible interfaces, and rapid hardware customization without changing a PCB layout. The XC4VLX60-10FF1148I provides 6,656 logic array blocks, 2.81 Mbit of embedded memory, and 640 user I/O. Its 26,624 adaptive logic modules provide programmable combinational and sequential logic resources, while the 1148-ball FCBGA supports dense board-level interconnect requirements. The industrial-temperature suffix and -10 performance grade target systems where operating-temperature qualification and predictable logic performance are important. The device belongs to the Virtex-4 LX architecture and uses a 1.2 V core voltage. Its large logic array is suitable for parallel datapaths, protocol engines, embedded processor systems, network interfaces, and test equipment. Dedicated hard resources can reduce implementation effort when a design can use established blocks such as Ethernet controllers, memory controllers, or multiplier/accumulator functions rather than implementing every function in soft logic. Typical applications include high-speed network equipment, industrial control systems, telecommunications infrastructure, instrumentation, embedded computing, and ASIC prototyping. Its 640 user I/O makes it especially useful for boards carrying substantial parallel data, control signals, memory interfaces, clocks, and high-speed serial links. Designers should still verify every interface voltage, speed, pin standard, and power requirement against the device documentation before beginning implementation. The primary engineering constraint is power and signal integrity in the 1148-ball FCBGA. A multilayer PCB with a solid ground plane, carefully decoupled supply rails, controlled-impedance routing, and complete test access is strongly recommended. Device configuration also depends on a valid startup sequence and suitable configuration memory, so power rails and configuration control must be designed together rather than treated as independent blocks. This page combines the exact ordering information, package characteristics, architecture parameters, drop-in family options, comparison data, and implementation guidance needed to evaluate the XC4VLX60-10FF1148I before schematic capture or PCB layout. It also distinguishes exact same-footprint alternatives from options that require a different package or a different FPGA architecture.

RFQ যোগাযোগ
XC4VLX60-10FF668C - 59,904-Cell FPGA | AMD Xilinx
XC4VLX60-10FF668C

XC4VLX60-10FF668C - 59,904-Cell FPGA | AMD Xilinx

The AMD Xilinx XC4VLX60-10FF668C is a Virtex-4 LX field-programmable gate array built on 90 nm CMOS technology, with 59,904 logic cells, 6,656 configurable logic blocks, 448 I/O sites, and a 668-pin FCBGA package. The -10 speed grade supports an internal clock frequency of 1,028 MHz, while the specified commercial operating-temperature range is 0°C to 85°C. These characteristics position the device for high-density parallel processing, embedded control, networking, signal processing, and communications systems requiring substantial programmable logic and I/O bandwidth. An FPGA is a reconfigurable digital semiconductor whose programmable logic blocks, routing fabric, block RAM, dedicated arithmetic resources, and input/output resources can be configured after manufacture. Within the device hierarchy, the XC4VLX60 belongs to the Virtex-4 LX FPGA family and combines configurable logic, embedded memory, DSP-oriented arithmetic blocks, high-speed serial connectivity, and programmable I/O. This combination allows a single device to implement parallel datapaths and control logic that would otherwise require multiple programmable devices. The principal features include 59,904 logic cells, 6,656 configurable logic blocks, 448 I/O, a 1,028 MHz internal frequency, and CMOS operation. The 668-ball FCBGA package supports dense PCB routing while requiring careful high-speed layout, power-plane design, via structure, and thermal analysis. The -10 suffix identifies the performance grade, while the FF668 suffix identifies the 668-pin package configuration and the C suffix identifies the commercial temperature grade. The XC4VLX60-10FF668C is architecturally a 90 nm CMOS FPGA built around an interconnected fabric of configurable logic blocks. Its 6,656 CLBs support parallel Boolean, arithmetic, control, and data-processing implementations. The 448 I/O provide substantial connectivity for external memories, transceivers, clocks, data converters, and communication peripherals. Because the device combines many high-speed domains, system timing closure depends on constrained clocking, correct I/O standards, and controlled impedance routing rather than function alone. Typical applications include high-throughput network packet processing, industrial automation and control, video and image pipelines, telecommunications equipment, test and measurement systems, and embedded signal-processing platforms. In these systems, the programmable architecture allows designers to change interfaces or algorithms without changing the PCB, while the large logic count supports parallel computation and the I/O count supports wide data buses. The primary design consideration is power and signal integrity. Designers should use the manufacturer's power-decoupling and pin-placement guidance, provide clean references and clocking, and constrain all high-speed interfaces. The 668-pin FCBGA also requires thermal-aware via placement and adequate copper spreading beneath the device to prevent localized heating from reducing timing performance or reliability. This product record combines the exact ordering information, logic density, package characteristics, speed grade, temperature range, and I/O count with practical guidance for FPGA migration, replacement assessment, high-speed PCB layout, and application selection. It also distinguishes same-footprint Virtex-4 LX alternatives by speed, temperature, and package suffix so engineers can identify changes that require design review rather than assuming every ordering code is interchangeable.

RFQ যোগাযোগ
XC4VLX60-10FF668I - 59,904-Cell 90nm FPGA | AMD | FBGA-668
XC4VLX60-10FF668I

XC4VLX60-10FF668I - 59,904-Cell 90nm FPGA | AMD | FBGA-668

The AMD XC4VLX60-10FF668I is a Virtex-4 LX field-programmable gate array with 59,904 logic cells, 448 I/O sites, and a 668-ball FCBGA package. Built on 90 nm CMOS technology and powered from 1.2 V, it targets complex fixed-function logic, interface bridging, DSP, networking, telecommunications, and industrial control systems requiring substantial parallel programmable resources. An FPGA is a semiconductor whose digital behavior is defined after manufacture through a configuration bitstream. Within the product hierarchy, this device is an FPGA and programmable logic device, combining configurable logic blocks, block RAM, dedicated DSP resources, programmable I/O, and clock-management circuitry. The Virtex-4 LX architecture provides a unified fabric for implementing parallel datapaths and control logic rather than relying on several discrete logic devices. Key device attributes include 59,904 logic cells, 448 I/O, 26,624 adaptive logic modules, 2.81 Mbit of embedded memory, 90 nm CMOS construction, and a 1.2 V supply. The -10 speed grade targets the lower-performance end of the Virtex-4 LX range, while the industrial I suffix identifies operation from 0°C to 85°C. The 668-ball FCBGA package supports dense board integration but requires careful via-in-pad, solder-mask, and thermal design. The part's 59,904 logic cells provide substantially more parallel capacity than small CPLDs, while its 448 I/O sites support high-pin-count interfaces. Embedded memory supports packet buffering, frame storage, lookup functions, and data-plane buffering. Dedicated DSP arithmetic and selectable clocking help implement fixed-point signal processing, serializers, and multi-clock systems without relying entirely on soft processors. Typical uses include telecommunications line cards, industrial automation, data acquisition, video processing, network equipment, and embedded control. For high-speed memory interfaces or external buses, designers must implement timing constraints, clocking, and I/O standards correctly. Firmware development should account for configuration storage, startup sequencing, JTAG access, and the effect of board-level signal integrity on the 668-ball package. For a new design, first verify the bitstream targets the exact device and speed grade. Use AMD package pinout files and the Virtex-4 documentation to assign every ball, and confirm power, decoupling, clock, configuration, and JTAG requirements. Existing legacy designs should also review tool-chain support and long-term availability before committing to a new production run. This page combines device specifications, package-level engineering guidance, lifecycle considerations, comparison parameters, and practical drop-in alternatives. These details help engineers distinguish speed-grade, temperature-grade, and lead-free ordering variants before making a board-level replacement decision.

RFQ যোগাযোগ
XC4VLX60-10FFG668C - 6656-LC Virtex-4 LX FPGA | AMD
XC4VLX60-10FFG668C

XC4VLX60-10FFG668C - 6656-LC Virtex-4 LX FPGA | AMD

AMD XC4VLX60-10FFG668C is a Virtex-4 LX field-programmable gate array with 6656 logic cells, 448 I/O, a -10 speed grade, and a 668-ball FCBGA package. The device operates from a 1.2 V core supply and is specified for the commercial 0°C to 85°C temperature range. Its 1028 MHz internal frequency figure identifies it as a high-performance FPGA platform for parallel processing, programmable logic, signal processing, and communication-system control. An FPGA is a programmable semiconductor whose digital logic, interconnect, and dedicated resources can be configured after manufacture. The Virtex-4 LX belongs to the FPGA and programmable-logic hierarchy, combining configurable logic blocks, programmable routing, block RAM, and input/output resources in one integrated device. This architecture allows engineers to implement parallel datapaths and protocol-specific functions that may otherwise require numerous fixed-function ASICs or discrete logic devices. The XC4VLX60 portion of the ordering code identifies the LX device with 6656 logic cells. The -10 designation denotes its speed grade, while the FFG668C ordering suffix identifies the 668-ball package and commercial temperature option. The device provides 448 I/O according to its distributor listing, enabling interfaces to external memory, network transceivers, clocks, data converters, and high-speed parallel buses. The listed 1028 MHz internal frequency should not be interpreted as a guaranteed I/O or system clock rate. Practical operating frequency depends on the selected design, clocking resources, timing constraints, I/O standards, speed grade, and board implementation. Engineers must complete timing analysis and verify the implemented clocks against the device characterization rather than treating the internal-frequency figure as a universal performance guarantee. Typical uses include network interface controllers, telecommunications line cards, industrial control and acquisition systems, video-processing pipelines, storage interfaces, and embedded test equipment. The large I/O count is particularly useful when a design combines wide parallel buses with memory, DSP pipelines, and several clock domains. Dedicated block RAM also makes the FPGA useful for buffering, packet storage, and high-throughput data movement. PCB implementation must follow the AMD package data, including ball assignments, power rails, decoupling requirements, and controlled-impedance routing. The 668-ball FCBGA makes careful escape routing essential around the device, while the 1.2 V core rail requires a low-noise supply network and effective bulk and high-frequency decoupling. The AMD Virtex-4 package pinout resource should be used during symbol creation and PCB-library validation. This product page combines the exact ordering-code details, package information, documented parameter values, same-family drop-in options, and application guidance. It also distinguishes speed-grade, package-code, and temperature-grade changes that can otherwise make an FPGA replacement appear compatible at the family level but unsuitable for the exact operating requirement.

RFQ যোগাযোগ