উপশ্রেণী

পণ্য (44,000+)

XC4VLX15-11FF668C - 13,824-L-Cell Virtex-4 LX FPGA | AMD
XC4VLX15-11FF668C

XC4VLX15-11FF668C - 13,824-L-Cell Virtex-4 LX FPGA | AMD

The AMD XC4VLX15-11FF668C is a Virtex-4 LX field-programmable gate array with 13,824 logic cells, 884,736 bits of block RAM, 32 DSP slices, and a 668-ball FCBGA package measuring 27 mm by 27 mm. It combines programmable logic, dedicated memory, and DSP resources for parallel processing, interface adaptation, and embedded control applications. A field-programmable gate array is a semiconductor whose digital logic is configured after fabrication. Within the broader programmable-logic hierarchy, an FPGA sits above CPLDs and provides substantially greater logic, memory, and high-speed I/O capacity. The Virtex-4 LX family is positioned between smaller FPGA families and larger high-performance platforms, making it suitable for demanding embedded systems that require parallel computation and flexible interfaces. Key resources include 13,824 logic cells, 864 Kb of block RAM, and 32 DSP48 slices. The dedicated DSP resources accelerate multiplication and arithmetic operations without requiring each operation to be implemented entirely in general-purpose LUT logic. The 668-ball FCBGA package also supports dense board routing for designs with numerous high-speed connections and substantial interface requirements. The “11” portion of the ordering code identifies speed grade 11, while the “C” suffix identifies the commercial-temperature grade. The “FF668” package designation identifies the 668-ball surface-mount package used by this device. Together, these ordering fields provide a concise way to distinguish performance grade, temperature grade, and mechanical package without changing the underlying XC4VLX15 device architecture. Typical design uses include industrial control and automation, networking equipment, test and measurement systems, embedded video processing, communications infrastructure, and high-throughput signal-processing modules. In each case, the FPGA can implement multiple parallel data paths, maintain timing-critical interfaces, and adapt hardware behavior through programmable logic after board fabrication. PCB implementation requires careful power, clock, and differential-signal routing. The 27 mm square FCBGA requires a compatible escape-routing strategy, and high-speed interfaces require controlled impedance, continuous reference planes, and minimized return paths. Designers should also review the AMD Virtex-4 package pinout files and power-decoupling guidance before releasing the layout. This product page consolidates the device identity, package characteristics, resource counts, drop-in alternatives, comparison parameters, and practical implementation guidance. It is intended to help engineers evaluate mechanical reuse, speed-grade differences, temperature-grade differences, and system-level suitability before committing a Virtex-4 LX design to production.

RFQ যোগাযোগ
XC4VLX15-11FFG668C - 13,824-Cell Virtex-4 FPGA | AMD
XC4VLX15-11FFG668C

XC4VLX15-11FFG668C - 13,824-Cell Virtex-4 FPGA | AMD

The AMD Xilinx XC4VLX15-11FFG668C is a Virtex-4 LX field-programmable gate array with 13,824 logic cells, 320 I/O terminals, a 1.2 V supply requirement, and a 668-ball FCBGA package. It uses 90 nm CMOS technology and is designated with speed grade 11 for the commercial temperature range of 0°C to 85°C. The device is suitable for complex digital logic, embedded processing, networking, signal processing, and programmable control systems requiring a high pin count and substantial parallel logic capacity. A field-programmable gate array is a semiconductor device whose digital functionality is configured after fabrication. An FPGA belongs to the programmable-logic hierarchy, combining configurable logic blocks, programmable interconnect, block memory, dedicated input/output resources, and other fixed functions on one integrated circuit. This allows engineers to implement and revise complex circuits without fabricating a custom ASIC. The Virtex-4 LX family is AMD Xilinx's general-purpose FPGA architecture, while the FFG668 option places the device in a large 27 mm by 27 mm flip-chip ball grid array. Key resources include 13,824 logic cells organized into 1,536 configurable logic modules, 320 I/O terminals, and a 668-package footprint. The advertised maximum frequency is 1,205 MHz, although practical performance also depends on the selected logic path, speed grade, external memory, routing congestion, and timing constraints. The XC4VLX15-11FFG668C is identified as a commercial-grade component with a 0°C to 85°C operating-temperature range. Its lead-free FCBGA construction supports compact, high-density board-level integration when the PCB has suitable escape routing, power delivery, and thermal design. The architecture is appropriate for parallel data processing, protocol termination, control-plane logic, test instrumentation, and embedded systems that need configurable hardware rather than a fixed function ASIC. Its 320 I/O terminals provide substantial connectivity for parallel buses, memory interfaces, clocks, and control signals. Designers must still base timing closure on the specific pin assignment and external circuit, because advertised device frequency does not guarantee the same frequency for every implemented design. Configuration storage, programming interfaces, power rails, decoupling, and JTAG access also require board-level implementation. Typical uses include industrial automation, communications infrastructure, instrumentation, defense and aerospace systems, high-speed interface bridging, and programmable signal-processing platforms. The large logic-cell count supports designs requiring multiple parallel channels, moderate on-chip buffering, or soft-processor-based control. For designs migrating from smaller FPGAs, the device can provide additional routing and I/O capacity while preserving a familiar programmable-logic workflow through AMD/Xilinx design tools. A critical implementation consideration is the 668-ball package. Its fine ball pitch requires careful PCB stack-up selection, via-in-pad or microvia planning, fanout routing, and assembly-process qualification. Follow the manufacturer's package pinout files and recommended land-pattern guidance when assigning balls. Power and ground distribution must also meet the device's simultaneous switching requirements; otherwise, high-activity designs may encounter voltage integrity or signal-integrity problems despite satisfactory logic timing. This product page combines device specifications, package guidance, application analysis, drop-in alternatives, and design-oriented comparisons. These engineering details help teams evaluate whether the XC4VLX15-11FFG668C provides the required logic, I/O, speed grade, package, and temperature capability before beginning schematic capture, PCB layout, and FPGA configuration.

RFQ যোগাযোগ
XC4VLX15-11FFG676C - 13,824-Cell Virtex-4 LX FPGA | Xilinx
XC4VLX15-11FFG676C

XC4VLX15-11FFG676C - 13,824-Cell Virtex-4 LX FPGA | Xilinx

The Xilinx XC4VLX15-11FFG676C is a Virtex-4 LX field-programmable gate array with 13,824 logic cells, 320 I/O, and a 676-pin FCBGA package. Built on 90 nm CMOS technology and powered from 1.2 V, this FPGA combines programmable logic, block RAM, XtremeDSP multiply-accumulate resources, and dedicated I/O resources in a single high-performance device. The -11 speed designation and G package suffix identify a lead-free member of the Virtex-4 LX family. A field-programmable gate array is a semiconductor whose digital logic and interconnections can be configured after fabrication. In the FPGA hierarchy, the XC4VLX15 belongs to the Virtex-4 LX family, a programmable-logic platform commonly used when designers need more flexibility than a fixed application-specific integrated circuit can provide. Its architecture supports parallel signal processing, protocol bridging, control, and data-processing functions within one configurable device. The principal feature set includes 320 I/O, 13,824 logic cells, 18-bit by 18-bit multiplier blocks, cascadeable multiply and multiply-accumulate operations, and dedicated XtremeDSP slices operating up to 500 MHz. These resources make the device suitable for demanding parallel pipelines, digital signal processing, communications infrastructure, industrial control, and test equipment. Its 676-ball surface-mount package supports dense board layouts but requires careful via-in-pad and thermal design. At the architectural level, the device combines dedicated DSP arithmetic with general-purpose programmable logic and block memory. An 18-bit by 18-bit multiplier can form the basis of multiply, multiply-accumulate, and complex multiply-add datapaths, while optional pipeline stages can support higher operating frequencies. This combination reduces the need to implement arithmetic operations entirely in fabric and can improve timing predictability in parallel processing architectures. Typical applications include wireless and wired communications, industrial automation, video and image processing, instrumentation, and embedded control systems. The 320 available I/O can accommodate control signals, high-speed interfaces, memory connections, and external peripheral buses, while the DSP resources accelerate filtering, correlation, modulation, and other mathematically intensive operations. PCB design requires a short, well-controlled power-distribution network, solid thermal paths through the 676-pin FCBGA, and clean routing between high-speed I/O and the FPGA core. The power, ground, and decoupling connections must follow the package and device guidance in the manufacturer datasheet, including layer-stack, via, and exposed-thermal-pad requirements. This product page combines the exact device specifications, package details, lifecycle information, drop-in replacement candidates, and practical design guidance into one engineering reference. It also distinguishes speed-grade and temperature-grade options that use the same 676-pin FCBGA footprint, helping engineers select the correct device without assuming that every family member is functionally identical.

RFQ যোগাযোগ
XC4VLX15-11SF363I - 13,824-Cell 90nm FPGA | Xilinx, Inc.
XC4VLX15-11SF363I

XC4VLX15-11SF363I - 13,824-Cell 90nm FPGA | Xilinx, Inc.

Xilinx, Inc. XC4VLX15-11SF363I is a Virtex-4 LX field-programmable gate array with 13,824 logic cells, 240 user I/Os, and a 363-ball FCBGA package. The device uses 90 nm CMOS fabrication and is specified around a nominal 1.2 V core supply. Its -11 speed grade targets demanding general-purpose logic, DSP, embedded processing, networking, and industrial control applications requiring substantial programmable resources in a single package. A field-programmable gate array is a semiconductor device whose digital logic, interconnect, and dedicated blocks are configured after manufacture. The FPGA category sits below programmable logic and above fixed-function processors and custom application-specific integrated circuits. Compared with a mask-programmed ASIC, an FPGA allows design revisions, field updates, and hardware customization without fabricating a new ASIC mask. Compared with smaller CPLDs, it provides substantially greater logic, memory, dedicated processing, and high-speed I/O capability. The XC4VLX15-11SF363I provides 1,536 configurable logic blocks and 13,824 logic cells, with 240 user I/Os distributed through the 363-FCBGA package. Its architecture supports parallel logic implementation, DSP processing, block RAM, and dedicated I/O resources, depending on the selected device features and design. The nominal 1.2 V core voltage is accompanied by a stated operating range of 1.14 V to 1.26 V, while separate supply rails support the device's configurable and fixed-function I/O structures. The -11 designation identifies the device's speed grade, while the industrial suffix identifies its specified operating-temperature class. The package's ball count is larger than its user-I/O count because the FCBGA also provides power, ground, configuration, dedicated function, and other package balls. A complete PCB design must follow the manufacturer package pinout, differential-pair rules, power-plane arrangement, and via requirements rather than treating all 363 balls as general-purpose user I/O. Typical uses include industrial automation, communications infrastructure, test and measurement, high-speed signal processing, embedded control, and prototype systems requiring a high logic-cell count. The Virtex-4 architecture is particularly useful when a design needs parallel DSP pipelines, moderate on-chip RAM, numerous user I/Os, and reconfigurable hardware in one device. Designs should account for configuration memory, startup behavior, clocking, termination, and tool-version compatibility during migration or maintenance. PCB implementation should place decoupling capacitors close to the associated supply balls, route clocks with short return paths, preserve regulated supply sequencing, and use the manufacturer's recommended ball-pad geometry. Because this is a fine-pitch FCBGA device, inspection, assembly, solder-mask definition, via-in-pad practice, thermal management, and board warpage are as important as logic selection. Configuration pins and dedicated inputs must not be left unconstrained merely because they are not user I/Os. This product record combines the verified device identity, package and logic-resource details with sourcing guidance, replacement constraints, and practical design notes. It also distinguishes true package-compatible order-code variants from larger-package devices that would require a PCB redesign, helping engineers evaluate replacement and redesign decisions before committing a new design.

RFQ যোগাযোগ
XC4VLX15-11SFG363C - 13,824-Cell Virtex-4 FPGA | AMD
XC4VLX15-11SFG363C

XC4VLX15-11SFG363C - 13,824-Cell Virtex-4 FPGA | AMD

AMD XC4VLX15-11SFG363C is a Virtex-4 LX field-programmable gate array with 13,824 logic cells, a 1.2 V core supply, and a 363-pin FCBGA package. It uses 90 nm CMOS technology, provides 864 Kb of block RAM, and includes 32 DSP slices. The -11 designation identifies the device speed grade, while the SFG363 suffix identifies the 17 mm × 17 mm FCBGA package and commercial-temperature configuration. A field-programmable gate array is a programmable-logic semiconductor in which interconnect and logic resources are configured after fabrication. Within the device hierarchy, the XC4VLX15 belongs to the Virtex-4 LX FPGA family, combines configurable logic blocks with block RAM and DSP resources, and supports the implementation of parallel processing, control, signal-processing, and interface functions on a single integrated circuit. Unlike a fixed-function application-specific integrated circuit, an FPGA allows its logical architecture to be updated through configuration data. The principal resources are 13,824 logic cells, 864 Kb of block RAM, and 32 DSP slices. The 13,824-cell count describes the device’s configurable logic capacity, while the block RAM enables buffering, packet storage, and general-purpose data retention. Its 32 DSP slices support arithmetic-intensive pipelines, including fixed-point filtering, multiply-accumulate operations, and digital signal-processing functions. The 1.2 V core voltage and 90 nm CMOS process identify the device as a compact, low-voltage programmable-logic platform. The XC4VLX15-11SFG363C is packaged in a 363-FCBGA configuration measuring 17 mm × 17 mm. This high-pin-count surface-mount package provides dense connectivity for configuration, clocking, user I/O, configuration data, and dedicated FPGA functions. Because the package is nonstandard and pin-intensive, board layout should follow the AMD pin-description tables and escape-routing guidance rather than relying on a generic BGA symbol. Decoupling, clock routing, configuration access, and thermal management are therefore central PCB-design considerations. Typical applications include industrial automation, communications infrastructure, networking equipment, embedded control, video and image processing, test equipment, and high-speed signal-processing systems. The 32 DSP slices make the device suitable for parallel filter and transform pipelines, while the 864 Kb block RAM supports buffering between acquisition and processing stages. The 13,824 logic cells can implement protocol engines, state machines, clock-domain crossing logic, and peripheral control functions. Designers should assign the complete FPGA power rails and verify their sequencing, voltage levels, and current requirements against the manufacturer datasheet. Configuration storage must support the device’s programming requirements, and unused balls require appropriate treatment according to the pin-description table. For thermal analysis, estimate board-level dissipation from the configured resource mix and junction-temperature limits rather than assuming that the package alone determines operating temperature. This page combines the part’s key logic, memory, DSP, package, and timing identifiers with replacement guidance, comparison parameters, application fit, and practical board-design considerations for engineers evaluating the XC4VLX15-11SFG363C.

RFQ যোগাযোগ
XC4VLX15-11SFG363I - 13,824-Cell FPGA | Xilinx
XC4VLX15-11SFG363I

XC4VLX15-11SFG363I - 13,824-Cell FPGA | Xilinx

The Xilinx XC4VLX15-11SFG363I is a Virtex-4 LX field-programmable gate array with 13,824 logic cells, 240 I/O, an 11 speed grade, and a 1.2 V core supply in a 363-ball FCBGA package. It combines programmable digital logic, embedded block RAM, dedicated DSP resources, and configurable I/O within a single 90 nm CMOS device. The suffix identifies the package, speed grade, and industrial temperature option used by the target ordering code. A field-programmable gate array is a semiconductor device whose digital function is configured after manufacture. An FPGA belongs to the programmable-logic hierarchy, combining a configurable logic fabric with programmable interconnect, block memory, DSP arithmetic resources, and input/output blocks. Compared with a fixed-function application-specific integrated circuit, an FPGA can be reprogrammed for multiple protocols, test platforms, or control systems without changing the PCB layout. Key features include 13,824 logic cells, 240 I/O, and up to 884,736 gates as listed for this device. The 11 speed grade supports demanding Virtex-4 LX designs, while the 363-ball FCBGA package provides a dense interconnect for high-pin-count FPGA implementations. The 90 nm CMOS process and 1.2 V core voltage position the device within the Virtex-4 LX generation, where programmable logic, block RAM, and DSP blocks can implement parallel data processing without relying on discrete logic devices. The part belongs to the Virtex-4 LX platform, which combines configurable logic cells with dedicated resources for memory-intensive and arithmetic-heavy designs. Its 240 I/O provide connections to external memory, transceivers, clocks, data converters, and digital interfaces. System-level performance depends on the selected I/O standard, clock architecture, board routing, memory interface implementation, and FPGA design; the package itself does not specify one universal application performance. Typical uses include communications infrastructure, industrial control, instrumentation, video processing, test equipment, and embedded high-performance digital systems. The 363-ball FCBGA is appropriate when a design needs many high-speed connections and cannot use a lower-ball-count package. The 11 grade can also suit clocked processing pipelines where logic timing margin is more important than minimum cost or power. PCB design is the primary practical constraint. Follow the AMD Virtex-4 package pinout files for every ball assignment, power rail connection, configuration signal, and exposed thermal requirement. Keep high-speed clock and data nets tightly controlled, provide the specified decoupling and configuration circuitry, and verify that the assembled board has adequate thermal spreading beneath the large FCBGA package. This product record combines the exact device identity, package, resource summary, verified ordering information, compatible family alternatives, and engineering-focused design guidance. It helps engineers distinguish true same-package replacements from related Virtex-4 devices and evaluate FPGA selection, layout, configuration, thermal, and sourcing considerations in one place.

RFQ যোগাযোগ
XC4VLX15-12FF676C - 13,824-Cell FPGA | AMD | Embedded
XC4VLX15-12FF676C

XC4VLX15-12FF676C - 13,824-Cell FPGA | AMD | Embedded

The AMD XC4VLX15-12FF676C is a Virtex-4 LX field-programmable gate array with 13,824 logic cells, 320 I/O, and a 676-ball FCBGA package. It uses 90 nm CMOS technology with a stated 1.2 V core supply, making it a configurable logic platform for embedded control, signal processing, communications, and industrial systems. The -12 suffix identifies the device speed grade, while FF676C identifies its 676-ball package configuration. An FPGA is a programmable semiconductor whose digital logic, interconnect, and I/O resources are configured after manufacture. Within the electronics hierarchy, an FPGA belongs to programmable logic devices, alongside CPLDs, rather than fixed-function processors or application-specific integrated circuits. Its parallel architecture can execute multiple control, filtering, protocol, or interface functions concurrently, while configuration data determines the implemented circuit. The Virtex-4 LX family combines programmable logic with dedicated resources for demanding embedded designs. The XC4VLX15-12FF676C provides 13,824 logic cells and 320 I/O in one compact package. Its 676-ball surface-mount format supports dense PCB routing, although the large ball pitch and fine-pitch escape routing require careful PCB planning. The 90 nm CMOS process and 1.2 V core voltage should be considered when planning clocking, power delivery, and thermal performance. The device is suited to applications requiring substantial parallel logic rather than a low-pin-count simple controller. Potential uses include industrial automation, test and measurement, communications infrastructure, embedded video processing, and control systems. A 320-I/O budget can connect memory interfaces, parallel buses, high-speed serial links, clocking resources, and external converters while retaining configurable logic capacity. For a new Virtex-4 LX design, engineers should preserve the exact device pinout, supported memory interfaces, configuration interface, and power architecture of the XC4VLX15-12FF676C. Configuration storage and startup behavior are as important as logic capacity: use the manufacturer package pinout files and device documentation when assigning PCB balls and selecting companion components. Thermal design is driven by core activity, I/O toggling, voltage conversion, and ambient conditions. Decoupling networks should follow the manufacturer guidance for each supply rail, and high-speed clock and serial-routing decisions should be made before layout is finalized. Because this package exposes 676 contacts, assembly inspection and board-planarization checks are especially important. This product page combines the exact ordering information, package characteristics, verified technical attributes, same-family drop-in candidates, comparison parameters, and practical design guidance into one engineering reference. It also highlights which attributes require confirmation against the AMD Virtex-4 LX documentation before schematic release or PCB signoff.

RFQ যোগাযোগ
XC4VLX15-12FFG668C - 13,824-Cell -12 Virtex-4 LX FPGA | AMD
XC4VLX15-12FFG668C

XC4VLX15-12FFG668C - 13,824-Cell -12 Virtex-4 LX FPGA | AMD

The AMD XC4VLX15-12FFG668C is a Virtex-4 LX field-programmable gate array with 13,824 logic cells, 320 user I/O, and a -12 speed grade, packaged in a 668-pin FCBGA. It uses 90 nm CMOS technology and operates from a 1.2 V core supply, combining programmable logic density with a large I/O count in a high-pin-count surface-mount package. The -12 suffix identifies the highest performance grade offered for the Virtex-4 LX family. A field-programmable gate array, or FPGA, is a semiconductor whose digital logic, interconnect, and I/O behavior can be configured after fabrication. Within the product hierarchy, an FPGA is a programmable logic device and a type of integrated circuit. The XC4VLX15 belongs to AMD's Virtex-4 LX FPGA family, where the 15 designation identifies the device density tier and the FFG suffix identifies the 668-pin FCBGA configuration. The XC4VLX15-12FFG668C provides 13,824 logic cells, 320 I/O, and an advertised 884,736 logic-gate resource count. Its -12 performance grade makes it the fastest listed grade for this device family. The 668-pin FCBGA exposes substantially more signal connections than lower-pin-count packages, allowing systems to connect external memory, high-speed interfaces, clocks, control signals, and external data buses. The 90 nm CMOS process and 1.2 V core voltage place the device within the Virtex-4 generation of Xilinx/AMD FPGAs. Typical deployments include telecommunications and industrial control equipment, high-throughput data processing, network-interface subsystems, test and measurement systems, embedded signal-processing platforms, and general-purpose accelerator logic. The large I/O count is especially useful where multiple buses and memory interfaces must converge on one programmable device. Applications must also account for the complexity of a 668-pin BGA, including power distribution, decoupling, escape routing, thermal design, and manufacturing inspection requirements. The principal engineering trade-off is performance versus obsolete-product risk. The -12 grade provides maximum timing margin within Virtex-4 LX designs, but FPGA design completion also depends on toolchain, intellectual-property core, and device-support availability. Use the manufacturer datasheet and package pinout files to confirm ball assignments, power rails, configuration requirements, and board-level constraints before layout release. This page combines device characteristics, sourcing guidance, drop-in candidate review, comparison data, and practical design notes to support faster engineering evaluation. It also distinguishes exact electrical equivalents from speed-grade, temperature-grade, and package differences that can affect a production redesign.

RFQ যোগাযোগ
XC4VLX15-12FFG676C - Virtex-4 LX FPGA | AMD Xilinx
XC4VLX15-12FFG676C

XC4VLX15-12FFG676C - Virtex-4 LX FPGA | AMD Xilinx

The AMD Xilinx XC4VLX15-12FFG676C is a Virtex-4 LX field-programmable gate array with 320 outputs, a 676-BBGA FCBGA package, and a -12 speed grade. It is a member of the Virtex-4 family of programmable logic devices, combining configurable digital logic, dedicated resources, programmable I/O, and embedded memory within one integrated circuit. The exact device is identified by the XC4VLX15 base designator, the -12 performance grade, the FFG676 package code, and the C suffix. A field-programmable gate array, or FPGA, is a semiconductor whose digital functionality is configured after fabrication. FPGAs belong to the programmable-logic hierarchy, alongside CPLDs, and are used when engineers need adaptable parallel processing, high I/O density, or hardware acceleration without fabricating a custom ASIC. The Virtex-4 family was designed for communications, industrial control, instrumentation, networking, embedded processing, and other systems requiring configurable logic and substantial board-level integration. The XC4VLX15-12FFG676C combines the Virtex-4 LX architecture with 320 programmable outputs and a 676-ball FCBGA package. Its package provides a high-density connection interface for systems that need many external signals. The -12 suffix denotes its speed grade within the Virtex-4 LX ordering system, while the FFG676 package code identifies the 676-ball fine-pitch BGA configuration. These device and package identifiers are essential when matching the correct footprint, memory interface requirements, and power characteristics. FPGA performance depends on both the selected device and the completed design. The Virtex-4 LX architecture supports parallel datapaths that can accelerate tasks involving serial processing, fixed-function logic, or programmable signal generation. Designers evaluate clocking, pin assignments, memory bandwidth, and routing before implementation. For a production design, the complete AMD pinout and package files should be used to assign power, ground, configuration, clock, and user I/O balls without relying on a simplified distributor diagram. Typical uses include communications equipment, industrial automation, test and measurement systems, network-interface designs, embedded control, and high-density signal processing. The FPGA can implement multiple concurrent pipelines where fixed-function processors would require several devices or extensive parallel hardware. A clocking architecture, power-distribution network, memory interface, and configuration scheme are normally tailored to the specific board rather than copied unchanged between applications. PCB implementation should prioritize the manufacturer's package recommendations, especially for the dense 676-ball FCBGA footprint. Power and ground distribution require low-impedance planes or carefully designed pours, while decoupling must be placed close to the relevant supply balls. Differential clock and high-speed I/O routing also requires controlled impedance, continuous reference planes, and minimized stubs to reduce data-integrity risk. This page combines the exact device identity, 320-output device information, 676-BBGA packaging, family-level guidance, drop-in comparison points, and practical implementation considerations. It is designed to help engineers identify the correct FPGA, compare compatible ordering codes, plan the board footprint, and assess whether the selected Virtex-4 LX device matches the required logic, I/O, and application environment.

RFQ যোগাযোগ
XC4VLX15-12SFG363C - 13,824-Cell FPGA | AMD Xilinx Virtex-4 LX
XC4VLX15-12SFG363C

XC4VLX15-12SFG363C - 13,824-Cell FPGA | AMD Xilinx Virtex-4 LX

The AMD Xilinx XC4VLX15-12SFG363C is a Virtex-4 LX field-programmable gate array with 13,824 logic cells, 1,536 configurable logic blocks, 240 I/O, and 884,736 bits of distributed RAM in a 363-ball FCBGA package. It is built on 90 nm CMOS technology and operates from a 1.2 V core supply. The -12 designation identifies its device speed grade, while SFG363C identifies the 363-ball flip-chip BGA package configuration. A field-programmable gate array is a semiconductor whose digital logic, interfaces, and signal-processing functions are configured after manufacture. FPGAs belong to the programmable-logic hierarchy, alongside CPLDs, and combine configurable logic blocks with programmable interconnect and input/output resources. The Virtex-4 LX family balances medium-scale logic capacity with embedded arithmetic, block RAM, and high-performance differential I/O for communications, industrial control, instrumentation, and embedded signal-processing systems. The XC4VLX15 provides 13,824 logic cells distributed across 1,536 CLBs, with 240 user I/O in the 363-FCBGA configuration. Its 90 nm CMOS process supports integration of configurable logic, 884,736 bits of distributed RAM, dedicated block RAM, and DSP48 arithmetic resources. This combination allows designers to implement parallel datapaths, protocol controllers, and control logic in one programmable device rather than combining an FPGA with multiple discrete components. The FCBGA package uses an area-array ball interface and is intended for surface-mount PCB assembly. Because the device contains many high-speed signals, board design must provide continuous return paths beneath the device, carefully controlled impedance, clean power distribution, and a thermal design that accounts for the concentrated logic activity of a 363-ball package. The manufacturer package documentation should be used directly when defining escape routing and ball assignments. Typical applications include industrial control systems, telecom line-card and interface logic, test-and-measurement equipment, high-speed data acquisition, embedded networking, and defense or aerospace subsystems that require programmable logic. In each case, the FPGA can implement parallel processing, state machines, bus protocols, and custom interfaces while retaining the flexibility to revise hardware behavior through configuration updates. Design planning should begin with the complete pin and power requirements in the manufacturer datasheet, followed by device utilization checks in the appropriate FPGA implementation tools. Engineers should reserve configuration-memory resources, validate pin assignments against board constraints, confirm supported I/O standards, and estimate junction temperature for the selected PCB and enclosure. The -12 speed grade must also be checked against the timing targets of the finished design. This product page combines the exact XC4VLX15-12SFG363C configuration with practical alternatives, package-aware comparisons, application guidance, and design cautions. It is intended to accelerate engineering review while preserving the distinction between a true same-footprint replacement, a different speed grade, and a functionally related but non-identical FPGA choice.

RFQ যোগাযোগ
XC4VLX25-10FF668C - 24,192-Cell FPGA | AMD Xilinx
XC4VLX25-10FF668C

XC4VLX25-10FF668C - 24,192-Cell FPGA | AMD Xilinx

The AMD Xilinx XC4VLX25-10FF668C is a Virtex-4 LX field-programmable gate array with 24,192 programmable logic cells, 448 I/O sites, and a 668-pin FCBGA package. It uses 90 nm CMOS fabrication technology, a 1.2 V core supply, and a -10 speed grade for general commercial applications. The FPGA combines programmable logic, block RAM, dedicated DSP processing resources, and programmable I/O in a single device. A field-programmable gate array is a semiconductor device whose digital logic is configured after manufacture. An FPGA belongs to the programmable-logic hierarchy, where configurable logic blocks are connected through programmable routing resources. Compared with application-specific integrated circuits, an FPGA permits hardware updates, parallel processing, and rapid adaptation without redesigning an ASIC. The Virtex-4 LX family targets demanding signal-processing, communications, industrial-control, and embedded-computing systems. The XC4VLX25 provides 2,688 configurable logic blocks, equivalent to the reported 24,192 logic cells, and 448 available I/O sites. Its 90 nm CMOS process and 1.2 V core voltage represent the architectural characteristics of the Virtex-4 generation. The -10 suffix identifies the device speed grade, while FF668 identifies a 668-pin FCBGA package configuration. The device supports high-density parallel logic and dedicated fixed-function resources within one programmable package. Virtex-4 LX devices combine general-purpose programmable logic with dedicated DSP blocks and block RAM. This heterogeneous architecture allows each design to allocate parallel arithmetic paths, storage, control logic, and external interfaces according to workload. The 448 I/O sites support substantial connectivity to memory, transceivers, converters, clocks, and custom peripherals. Exact RAM, DSP, and I/O characteristics should be confirmed in the relevant Virtex-4 family documentation before final resource allocation. Typical uses include digital signal processing, serial interface bridging, industrial automation, communications infrastructure, instrumentation, and embedded control. The 24,192-cell device is particularly appropriate when several parallel data paths must execute concurrently and design updates are needed after deployment. It is also suitable for legacy platform maintenance where an established Virtex-4 design, bitstream, and 668-pin board layout must remain unchanged. The main design consideration is board-level compatibility. A replacement must preserve the 668-pin FCBGA footprint, power architecture, configuration method, bank assignments, and supported bitstream behavior. A faster speed grade can change timing margins and should be evaluated against the original -10 timing constraints. Component substitutions should therefore be verified using the AMD package-pinout files and the original design constraints. This page organizes the device specifications, package implications, application fit, and compatible family variants into an engineering-oriented selection reference. It also distinguishes genuine drop-in options from unrelated FPGA families whose different die sizes, packages, I/O structures, and configuration requirements prevent direct board-level substitution.

RFQ যোগাযোগ
XC4VLX25-10FF668I - 24,192-Cell Virtex-4 LX FPGA | AMD
XC4VLX25-10FF668I

XC4VLX25-10FF668I - 24,192-Cell Virtex-4 LX FPGA | AMD

AMD XC4VLX25-10FF668I is a Virtex-4 LX field-programmable gate array with 24,192 logic cells, 448 I/O, and a 668-ball FCBGA package. The device is associated with a -10 speed grade and an industrial operating-temperature range of -40°C to 100°C. Its 90 nm CMOS implementation, 1.2 V core technology, and 1,028 MHz maximum clock frequency place it in the class of high-density FPGAs used for configurable logic, parallel processing, signal acquisition, and control systems. A field-programmable gate array is a programmable digital integrated circuit whose logic, interconnect, and input/output behavior are configured after manufacture. An FPGA sits above simple programmable logic devices in the digital-semiconductor hierarchy because it combines programmable logic blocks, block RAM, programmable I/O, dedicated arithmetic resources, and user-selectable routing. The XC4VLX25 belongs to the Virtex-4 LX family, where LX identifies the general-purpose logic density and architecture tier. The verified component listings identify 24,192 logic cells, 448 I/O, and a 668-ball grid-array package. This combination supports parallel datapaths and moderate-to-high pin counts on systems with complex control or interface requirements. The -10 designation identifies the performance grade, while the industrial suffix identifies the intended temperature class. A lead-free G-terminal variant of the same speed grade is also listed, providing a sourcing option where the required qualification and board-compatibility conditions are satisfied. The FPGA uses 90 nm CMOS technology and operates from a 1.2 V core supply according to the family-level comparison information. Its maximum clock frequency is listed as 1,028 MHz. Actual design performance depends on the selected Xilinx development environment, device configuration, clocking topology, memory interfaces, routing congestion, and the speed grade of the production device; a theoretical maximum clock should not be treated as a guaranteed system operating frequency. Typical Virtex-4 LX design uses cases include industrial control, networking equipment, instrumentation, telecommunications, embedded signal processing, test systems, and high-speed interface aggregation. The 448-I/O device is particularly useful where multiple buses, parallel converters, memory interfaces, clocks, and control signals must coexist on one programmable device. Its relatively large 668-ball package also requires careful PCB layout, power planning, and thermal analysis. Replacement planning should begin with the exact package and device family because footprint compatibility alone does not guarantee an interchangeable design. AMD support guidance identifies another XC4VLX25 in the same package as the fully compatible route, with speed grade and temperature grade determining suitability. PCB designers must also verify power sequencing, configuration memory, bank voltages, decoupling, differential I/O requirements, and the generated bitstream before approving a substitution. This page consolidates the device identity, package, temperature class, speed grade, and sourced replacement paths into an engineering-focused comparison. It also separates documented selection criteria from design-dependent performance, helping teams evaluate FPGA replacements without overlooking temperature, tooling, bitstream, or PCB compatibility requirements.

RFQ যোগাযোগ
XC4VLX25-10FFG668C - 24,192-Cell Virtex-4 LX FPGA | AMD
XC4VLX25-10FFG668C

XC4VLX25-10FFG668C - 24,192-Cell Virtex-4 LX FPGA | AMD

The AMD XC4VLX25-10FFG668C is a Virtex-4 LX field-programmable gate array with 24,192 logic cells, 2,688 logic blocks, 448 I/O, and 1,327,104 bits of block RAM in a 668-pin FCBGA package. The device uses CMOS fabrication on a 90 nm process and belongs to the -10 speed grade, with an operating temperature range of 0°C to 85°C. An FPGA is a programmable semiconductor whose configurable logic, interconnect, memory, and I/O resources implement digital systems that would otherwise require multiple discrete devices. The Virtex-4 LX FPGA family is positioned within the broader hierarchy of programmable logic devices, combining configurable logic blocks with embedded block RAM, programmable input/output resources, dedicated clock and routing networks, and high-speed serial connectivity. This makes the device suitable for communication, control, processing, and interface-intensive systems. Key resources include 24,192 logic cells organized into 2,688 logic blocks, 1,327,104 bits of total RAM, and 448 I/O. The listed internal frequency is 1,028 MHz, while the -10 suffix identifies the device speed grade. The package is a 668-pin FCBGA measuring 27 mm by 27 mm according to the product listing, and the device uses a 1.2 V supply in the manufacturer’s family description. The lead-free G finish supports RoHS-oriented manufacturing, while the C suffix denotes the commercial temperature range. Technically, the XC4VLX25-10FFG668C integrates programmable CLBs, distributed and block RAM, dedicated DSP resources, clock management, and SelectIO structures into one device. This resource mix allows parallel datapaths, protocol bridging, buffering, and control logic to be consolidated on a single FPGA. Designers must still constrain each design for its target clock, I/O standards, memory interfaces, and physical implementation using the supported AMD/Xilinx design environment. Typical applications include industrial networking, telecommunications equipment, embedded control, test and measurement, signal processing, and high-speed data acquisition. Its 448 I/O and 1.327 Mbit of block RAM provide substantial integration capacity, while the Virtex-4 LX fabric supports parallel processing and clocked digital architectures. Industrial control systems can also use the FPGA for deterministic acquisition, protocol conversion, and supervisory logic. A critical design consideration is package-level signal integrity. The 668-pin FCBGA requires a controlled multilayer PCB stack-up, exact escape routing, power and ground-plane distribution, and careful decoupling. Differential and high-speed interfaces must be routed according to the family datasheet and device pinout files. Because this is a large pin-count BGA, assembly inspection, via-in-pad strategy, thermal management, and connector or heatsink placement can materially affect system reliability. This page combines the verified device specifications, resource comparisons, same-package replacement guidance, and practical implementation notes to help engineers evaluate the XC4VLX25-10FFG668C for legacy Virtex-4 LX designs. AMD identifies fully compatible replacements as other XC4VLX25 devices using the same package with a different speed or temperature grade.

RFQ যোগাযোগ
XC4VLX25-10FFG668I - 24K Cell Virtex-4 LX FPGA | AMD
XC4VLX25-10FFG668I

XC4VLX25-10FFG668I - 24K Cell Virtex-4 LX FPGA | AMD

The AMD XC4VLX25-10FFG668I is a Virtex-4 LX field-programmable gate array with 24,192 logic cells, 448 I/O terminals, and a 668-pin FCBGA package. It uses 90 nm CMOS fabrication technology, operates from a 1.2 V core supply, and is offered in the -10 speed grade. The device is designed for high-performance programmable-logic systems requiring substantial parallel processing capacity, high I/O density, and deterministic FPGA-based architecture. A field-programmable gate array is a programmable semiconductor whose logic fabric, interconnect network, and I/O blocks can be configured after manufacture. Within the FPGA hierarchy, the Virtex-4 LX family provides general-purpose programmable logic for communications, control, networking, industrial, and embedded systems. Unlike fixed-function logic, an FPGA allows design changes to be implemented through a new configuration bitstream while retaining the same physical device and board layout. Key device characteristics include 24,192 logic cells, 2,688 configurable logic blocks, 448 I/O terminals, and a listed maximum internal frequency of 1028 MHz. Its 668-position FCBGA package concentrates a very large pin count into a compact surface-mount footprint. The -10 suffix identifies the device speed grade, while the FFG package code identifies the 668-ball package family used by this ordering code. The Virtex-4 architecture combines programmable logic blocks with dedicated resources for high-speed serial connectivity, memory, clock management, and general-purpose I/O. Its 448 I/O resources allow the device to interface directly with parallel buses, memory devices, control signals, and external data-conversion or communication circuits. Designers can partition the available logic among datapath processing, protocol handling, state machines, and supervisory functions. Typical uses include high-speed telecommunications equipment, network-interface controllers, industrial automation, test and measurement systems, signal processing, and embedded control platforms. The large logic capacity is particularly useful when implementing multiple parallel channels, substantial control logic, and hardware-assisted protocol processing on one programmable device. Configuration, clocking, power sequencing, and I/O standards should be established from the appropriate AMD device documentation before layout release. PCB implementation requires careful attention to the 668-ball FCBGA escape routing, power and ground distribution, decoupling, and high-speed signal integrity. A multilayer board with solid reference planes is generally preferable for a device with this many connections. Maintain the power and ground connectivity specified by the manufacturer, route sensitive clock and serial interfaces consistently, and validate the finished design with appropriate signal-integrity and thermal simulations. This product page combines the exact ordering-code details with practical selection guidance, same-package replacement analysis, and engineering-focused implementation notes. It is intended to help designers distinguish speed-grade and temperature-grade alternatives without confusing them with devices that require a different footprint, voltage configuration, bitstream, or board redesign.

RFQ যোগাযোগ
XC4VLX25-10FFG676C - 24,192-Cell Virtex-4 FPGA | Xilinx
XC4VLX25-10FFG676C

XC4VLX25-10FFG676C - 24,192-Cell Virtex-4 FPGA | Xilinx

The Xilinx XC4VLX25-10FFG676C is a Virtex-4 LX field-programmable gate array with 24,192 logic cells, 448 I/O, and a -10 speed grade, housed in a 676-ball FCBGA package. It combines programmable logic, configurable I/O, block RAM, and DSP resources in a single device for high-performance embedded signal-processing and control designs. The exact target also carries the G package suffix and C commercial temperature designation. A field-programmable gate array, or FPGA, is a semiconductor whose digital logic can be configured after manufacture. The FPGA belongs to the Virtex-4 LX family and sits within the broader hierarchy of programmable logic devices, digital semiconductors, and embedded processing components. Unlike a fixed-function application-specific integrated circuit, an FPGA lets engineers implement parallel pipelines, protocol interfaces, control algorithms, and system interconnect in configurable hardware. The principal identifiers are the XC4VLX25 device family, the -10 performance grade, the FFG676 package code, and the C commercial-temperature suffix. According to the manufacturer datasheet and distributor specifications, the device provides 24,192 logic cells and 448 I/O. Its 676-ball FCBGA package supports a high-density interface arrangement, making the device suitable for systems requiring numerous external connections alongside substantial parallel processing capacity. The Virtex-4 LX architecture supports multiple clocking and I/O resources, embedded block memory, dedicated DSP multipliers, and programmable interconnect. These resources can be combined in parallel rather than relying on sequential software execution, which is advantageous for image pipelines, protocol termination, fixed-function cryptography, data acquisition, and high-speed control. The -10 designation identifies the device speed grade; exact timing limits depend on the selected I/O standard, clocking conditions, and implemented logic. Typical applications include telecommunications line-card interface logic, industrial automation and motion control, radar or signal-processing front ends, high-speed data acquisition, network packet handling, and test equipment. The 448-I/O count also supports designs that interface multiple converters, memory devices, transceivers, and clock sources without requiring a separate external bus controller. When assigning this FPGA to a PCB, use the manufacturer’s Virtex-4 packaging and pinout specification to assign power, configuration, clock, and I/O balls. Preserve the prescribed decoupling and ballout geometry, and verify the selected package, speed grade, temperature range, and configuration interface before release. Bitstream compatibility is device-specific, so any alternative must be checked against the target part number and the original design constraints. This product record combines the exact XC4VLX25-10FFG676C identifiers with practical replacement guidance, package-aware comparisons, and design notes focused on FPGA integration. It helps engineers distinguish true same-device upgrades from different-package or functionally similar Virtex-4 options before beginning PCB or bitstream changes.

RFQ যোগাযোগ
XC4VLX25-10FFG676I - 24,192-LC Virtex-4 LX FPGA | Xilinx
XC4VLX25-10FFG676I

XC4VLX25-10FFG676I - 24,192-LC Virtex-4 LX FPGA | Xilinx

Xilinx XC4VLX25-10FFG676I is a Virtex-4 LX field-programmable gate array with 24,192 logic cells, 448 I/O pins, and 1,327,104 RAM bits in a 676-ball FCBGA package. The device combines ASMBL architecture with programmable logic, block RAM, dedicated DSP resources, and configurable I/O for complex digital systems. A field-programmable gate array is a programmable logic device in which the digital circuit is defined through configuration data rather than a fixed ASIC mask. In the device hierarchy, an FPGA sits above programmable logic arrays and logic cells, while the Virtex-4 LX family combines configurable logic blocks, embedded memory, DSP arithmetic, high-speed serial connectivity, and selectable I/O standards within one semiconductor. The XC4VLX25-10FFG676I provides 2,688 configurable logic blocks, 24,192 logic cells, and 448 user I/O. Its 1,327,104 bits of block RAM support buffering, packet storage, lookup logic, and data-pipeline functions. The -10 suffix identifies the device speed grade, while the FFG676 package designation identifies the 676-ball fine-pitch BGA package and its 1.00 mm terminal pitch. This device uses the Virtex-4 LX ASMBL architecture, combining programmable logic with dedicated arithmetic resources for high-throughput digital signal processing. The 448 I/O pins can support memory interfaces, parallel buses, clocks, and control signals, making the device suitable for designs requiring a large pin count and substantial on-chip storage. Its industrial temperature option is specified for junction temperatures from -40 °C to 100 °C. Typical uses include industrial control and data acquisition, communications infrastructure, test and measurement systems, video and imaging processing, high-speed interface bridging, and embedded DSP systems. Its combination of 24,192 logic cells and 1,327,104 RAM bits permits complete subsystem integration without relying on external logic devices for ordinary control and data-path functions. The main design consideration is package complexity. A 676-ball FCBGA requires a dense multilayer PCB, exact ball-map compatibility, controlled impedance routing, and assembly processes capable of handling a 1.00 mm pitch. Designers must also verify configuration memory, supply sequencing, thermal performance, and the complete pinout before committing to layout. This page consolidates the device identity, verified electrical characteristics, package constraints, drop-in family alternatives, comparison parameters, and practical PCB guidance into an engineering-focused reference for legacy Virtex-4 LX upgrades and obsolescence planning.

RFQ যোগাযোগ
XC4VLX25-10SF363C - 24,192-Cell Virtex-4 LX FPGA | AMD
XC4VLX25-10SF363C

XC4VLX25-10SF363C - 24,192-Cell Virtex-4 LX FPGA | AMD

The AMD XC4VLX25-10SF363C is a Virtex-4 LX field-programmable gate array with 24,192 system gates, 2,688 configurable logic blocks, 240 user inputs, 240 user outputs, and a 1,028 MHz internal-frequency figure. It is packaged in a 363-ball FCBGA and operates in the commercial temperature range of 0°C to 85°C. The -10 suffix identifies a 10-speed-grade device, while the SF363 suffix denotes the FCBGA package configuration. A field-programmable gate array is a programmable digital semiconductor that belongs to the FPGA hierarchy within programmable logic devices, semiconductors, and embedded processing systems. Unlike a fixed-function ASIC, an FPGA allows designers to configure programmable logic, block memory, DSP48 processing resources, and interconnect paths after manufacture. This makes Virtex-4 LX devices useful when a design needs substantial parallel processing, flexible logic density, or product upgrades without fabricating a new custom chip. The XC4VLX25-10SF363C combines 2,688 configurable logic blocks with 48 DSP48 slices and 1,296 Kbit of block RAM. Its 240 I/O pins support interfaces to external memory, high-speed serial links, clocks, data acquisition hardware, and control peripherals. The advertised 1,028 MHz frequency is a device-level performance figure rather than a guarantee that every user design will operate at that rate; achievable clock speed depends on the selected logic path, resource usage, timing constraints, and I/O standard. The device is manufactured using 90 nm CMOS technology and belongs to the Virtex-4 LX family. Its large logic capacity allows multiple processing pipelines to coexist with parallel memory interfaces and DSP-intensive operations. Relative to smaller CPLDs, the XC4VLX25 provides substantially more configurable logic and dedicated block RAM, making it suitable for complex digital engines rather than simple combinational control logic. Relative to later FPGA families, however, it offers lower capacity and fewer high-speed serial transceiver resources. Typical uses include high-throughput signal processing, video and image pipelines, industrial control systems, communications infrastructure, test equipment, and embedded accelerators. The dedicated DSP48 resources are particularly useful for filtering, multiplication, fixed-point arithmetic, and digital modulation. Designers can also use the large block-RAM pool for packet buffering, lookup tables, waveform storage, and local data-plane memories. PCB design must account for the fine-pitch 363-ball FCBGA, power integrity, thermal performance, and high-speed routing. A multilayer board with a solid ground plane, short supply connections, carefully placed decoupling capacitors, and controlled clock routing is generally appropriate. Because this is a large BGA, via-in-pad or via-under-bump construction may be needed when the device does not provide a usable thermal escape path. This product overview combines the verified package, logic, I/O, speed-grade, temperature, and architectural details with a practical replacement framework. It also explains when another XC4VLX25 package-compatible configuration is a defensible substitution and when temperature, speed-grade, or package differences prevent a true drop-in replacement.

RFQ যোগাযোগ
XC4VLX25-10SF363I - 24,192-Cell Virtex-4 LX FPGA | Xilinx
XC4VLX25-10SF363I

XC4VLX25-10SF363I - 24,192-Cell Virtex-4 LX FPGA | Xilinx

The Xilinx XC4VLX25-10SF363I is a Virtex-4 LX field-programmable gate array with 24,192 logic cells, 240 user I/Os, 1,296 Kbit of block RAM, and 48 DSP48 slices in an FCBGA-363 package. The -10 speed grade is intended for general-purpose designs requiring a mature, high-density programmable logic platform. A field-programmable gate array is a semiconductor device whose digital logic, interconnect, memory, and signal-processing resources can be configured after manufacture. The Virtex-4 LX family belongs to the broader FPGA and programmable-logic hierarchy, combining configurable logic blocks, block RAM, dedicated DSP resources, and high-speed I/O in one CMOS device. This integration allows complex parallel processing and interface functions to be implemented on a single package. The XC4VLX25-10SF363I provides 24,192 logic cells for digital control, datapath, protocol, and state-machine designs. Its 1,296 Kbit of block RAM supports buffering, packet storage, lookup functions, and data-plane pipelines. Forty-eight DSP48 slices provide dedicated arithmetic resources for filtering, fixed-point processing, and signal transformation, reducing the amount of logic that must be used for multiply-accumulate operations. The device offers 240 user I/Os and an internal frequency listed as 1,028 MHz in the device specifications. The FCBGA-363 package supports dense PCB routing, although its large pin count and fine-pitch ball array require careful escape routing, layer transitions, and thermal design. The listed operating-temperature range is 0°C to 85°C, placing the part in an industrial-temperature grade rather than an extended-temperature option. Typical uses include telecommunications line-card control, industrial automation, networking equipment, test and measurement systems, embedded signal processing, and high-speed interface bridging. The 48 DSP48 slices are particularly useful in filter, transform, and digital signal-processing pipelines, while the block RAM supports buffering and protocol state management. Board design should preserve adequate power and ground connectivity around the FCBGA-363 device and follow the manufacturer's package, decoupling, and thermal-layout guidance. Because this package contains 363 balls, escape routing and multilayer-transition planning should begin before component placement and stack-up decisions are finalized. This product record combines the known device specifications with lifecycle, procurement, and replacement guidance. It also distinguishes the exact XC4VLX25-10SF363I ordering code from the lead-free XC4VLX25-10SFG363I code and identifies the important package, speed-grade, environmental, and programming constraints engineers must check before reuse on an existing PCB.

RFQ যোগাযোগ
XC4VLX25-10SFG363C - 24192-Cell FPGA | AMD | FCBGA-363
XC4VLX25-10SFG363C

XC4VLX25-10SFG363C - 24192-Cell FPGA | AMD | FCBGA-363

The AMD XC4VLX25-10SFG363C is a Virtex-4 LX field-programmable gate array built on CMOS technology, with 24,192 logic cells, 2,688 configurable logic blocks, 240 I/O, and a maximum internal clock frequency of 1028 MHz. The device is supplied in a 363-ball FCBGA package and is identified with the -10 speed grade and commercial temperature range. A field-programmable gate array, or FPGA, is a programmable digital integrated circuit whose configurable logic blocks, programmable input/output blocks, and embedded memory resources can be interconnected to implement hardware functions. Within the semiconductor hierarchy, an FPGA belongs to the programmable-logic IC family and the FPGA and CPLD category. Unlike a fixed-function application-specific integrated circuit, an FPGA allows logic, routing, and interface behavior to be redefined by loading a bitstream. The XC4VLX25-10SFG363C provides 22,272 logic cells according to one aggregated part record, while the manufacturer-aligned distributor and component records identify 24,192 total logic cells and 2,688 CLBs. Its 240 I/O support high-speed connectivity to external memory, transceivers, processors, and custom interfaces. The 363-ball package offers substantially more electrical connections than a typical quad-flat package, making the device suitable for designs that require wide parallel interfaces. The -10 designation identifies one of the Virtex-4 LX speed grades, with -12 providing the highest performance. This part therefore targets designs that need substantial parallel logic capacity and a large pin count without moving to the fastest available speed grade. A maximum internal frequency of 1028 MHz describes the device capability associated with its clocking resources; achievable system clock rates remain dependent on design timing, I/O standards, and the selected device variant. Typical applications include telecommunications line-card and aggregation equipment, industrial control systems, network interface modules, high-speed data acquisition, storage controllers, and embedded systems requiring parallel bus connectivity. Its large 363-ball package also supports designs with numerous power, ground, configuration, clock, and user-I/O connections. When laying out the PCB, follow the AMD package footprint, ball map, and escape-routing guidance exactly. Configuration pins, dedicated supply rails, decoupling requirements, and the 0.8 mm ball pitch must be treated as layout-critical. Existing Virtex-4 designs should be revalidated whenever the speed grade, temperature grade, or package marking changes. This page combines the part identity, verified capacity and frequency data, drop-in upgrade options, comparison parameters, and practical design guidance in one engineering reference. It also distinguishes true same-footprint replacements from larger Virtex devices that require a different package or PCB redesign.

RFQ যোগাযোগ
XC4VLX25-10SFG363I - 24,192-Cell Virtex-4 LX FPGA | Xilinx
XC4VLX25-10SFG363I

XC4VLX25-10SFG363I - 24,192-Cell Virtex-4 LX FPGA | Xilinx

The Xilinx XC4VLX25-10SFG363I is a Virtex-4 LX field-programmable gate array with 24,192 logic cells, 1,327,104 bits of block RAM, 48 DSP48 slices, and 240 user I/Os, packaged in a 363-ball FCBGA. It is manufactured on 90 nm CMOS technology for -10 speed-grade operation with an industrial temperature rating of -40°C to 100°C junction temperature. An FPGA is a reprogrammable semiconductor that combines configurable logic blocks, programmable interconnect, block memory, and dedicated digital signal processing resources on one device. The Virtex-4 LX platform belongs to the broader FPGA and programmable-logic hierarchy, allowing designers to implement parallel datapaths, control logic, protocol handling, and signal processing without the fixed function of an ASIC. The XC4VLX25 is positioned for communications, industrial control, networking, test equipment, and embedded signal-processing systems. The device provides 2,688 logic blocks, 48 DSP48 slices, 240 user I/O channels, and 1,327,104 total RAM bits. Its 363-ball FCBGA footprint is approximately 17 mm by 17 mm. According to the AMD support cross-reference, fully footprint- and bitstream-compatible substitutions are limited to other XC4VLX25 devices using the same package with a different speed or temperature grade, making the package suffix a critical selection constraint. The -10 speed grade provides a practical balance between performance and operating characteristics for designs that do not require the -11 or -12 grades. The internal operating supply is listed as 1.2 V, while the I/O and auxiliary supply requirements are defined in the family documentation. The 90 nm CMOS architecture supports clocked logic, distributed RAM, block RAM, DSP pipelines, and programmable I/O standards determined by board-level design and the selected I/O supply. Typical uses include telecommunications line-card interfaces, industrial networking equipment, video-processing pipelines, radar and test instrumentation, and high-throughput data acquisition. The 48 DSP48 slices allow filters, correlators, FFT pipeline stages, and fixed-point multiply-accumulate operations to be implemented in parallel. The 240 user I/Os provide parallel connectivity for high-speed transceivers, memory interfaces, clocks, and control signals. Board design requires careful decoupling of the core and auxiliary supplies, controlled clock distribution, and verification that the selected I/O voltage and standards match attached devices. A 363-ball BGA also requires an assembly process with suitable stencil, solder-paste, and thermal-management practices to achieve reliable joint formation. This page consolidates package, resource, and lifecycle information with same-footprint upgrade guidance, engineering design notes, and direct comparisons among speed- and temperature-grade alternatives. It is intended to shorten the selection path between the exact ordered MPN, a compatible engineering upgrade, and a board-level redesign that requires a different package.

RFQ যোগাযোগ
XC4VLX25-11FF668C - 24,192-Cell FPGA | AMD Xilinx
XC4VLX25-11FF668C

XC4VLX25-11FF668C - 24,192-Cell FPGA | AMD Xilinx

The AMD Xilinx XC4VLX25-11FF668C is a Virtex-4 LX field-programmable gate array with 24,192 logic cells, 448 I/O, and a 668-ball FCBGA package. The device uses 90 nm CMOS technology and a 1.2 V core supply, combining programmable logic, block RAM, DSP resources, and programmable I/O in one high-performance FPGA package. A field-programmable gate array, or FPGA, is a semiconductor whose digital functionality is configured after manufacture. The FPGA hierarchy places the device among programmable logic devices and system-programmable semiconductors, above individual combinational and sequential logic elements. Its parallel architecture makes it suitable for parallel data processing, signal generation, interface aggregation, and control functions that would require multiple conventional processors or ASIC blocks. The XC4VLX25 device provides 24,192 logic cells, 448 I/O, 1,327,104 block RAM bits, and 24,192 total logic-related resources in a 668-ball FCBGA package. Its -11 designation identifies the device speed grade, while the C suffix identifies the commercial temperature option. These parameters make the part relevant to communications equipment, industrial control, test and measurement, embedded video, and high-speed digital interface designs. The 90 nm Virtex-4 architecture combines configurable logic blocks with dedicated memory and DSP48 processing elements. This heterogeneous resource mix allows designers to map parallel arithmetic, filtering, packet handling, and control functions onto dedicated silicon while using programmable logic for interfaces and state machines. The large 448-I/O count supports substantial board-level connectivity without requiring multiple external interface devices. Typical applications include network packet processing, industrial automation controllers, data-acquisition systems, communications infrastructure, high-speed test equipment, and embedded processing platforms. The 668-ball grid-array package also demands careful PCB layout, controlled impedance routing, thermal analysis, and assembly process control because of its pin density and the number of simultaneous high-speed connections. For a new design, verify configuration compatibility, supported I/O standards, clocking resources, power rails, and board-level pin assignments against the manufacturer datasheet and package files. A replacement should preserve the Virtex-4 LX device density, package footprint, configuration capability, voltage requirements, and timing margin; changing only the speed or temperature grade can be appropriate when those requirements remain satisfied. This page consolidates package details, sourcing guidance, drop-in upgrade paths, and practical design considerations for engineers evaluating the XC4VLX25-11FF668C. It distinguishes exact compatibility from broader FPGA substitutions and focuses on options that can support controlled redesigns or board reuse.

RFQ যোগাযোগ
XC4VLX25-11FF668I - 24,192-Cell Virtex-4 LX FPGA | AMD
XC4VLX25-11FF668I

XC4VLX25-11FF668I - 24,192-Cell Virtex-4 LX FPGA | AMD

The AMD XC4VLX25-11FF668I is a Virtex-4 LX field-programmable gate array with 24,192 logic cells, 448 I/O sites, 1,327,104 bits of block RAM, 24,192 DSP48 slices as listed in the product record, and a 668-ball FCBGA package. Built on 90 nm FPGA technology, the device operates from a 1.2 V supply and is identified by the -11 speed grade and industrial-temperature suffix. It combines programmable logic, dedicated arithmetic resources, block memory, and high-speed parallel I/O in one package. A field-programmable gate array is a semiconductor device whose digital circuitry is defined after manufacture through a configuration bitstream. The Virtex-4 LX family belongs to the FPGA and CPLD hierarchy within programmable-logic semiconductors. Instead of implementing every digital function with separate gates, a design can combine parallel processors, serial transceivers, clocking, memory, and custom interfaces in one configurable device. This integration reduces component count and provides flexible hardware that can be revised before final production. The XC4VLX25-11FF668I provides 24,192 logic cells, 448 I/O, 1,327,104 bits of block RAM, and a 668-pin FCBGA package. The listed 1.2 V core supply and 90 nm process are central to its performance and power characteristics. The -11 ordering code identifies the device speed grade, while the I suffix identifies the industrial temperature option. Its high pin count supports wide parallel interfaces and pin-intensive mixed-signal or networking equipment. Virtex-4 LX devices use configurable logic blocks and dedicated DSP48 arithmetic resources, with block RAM available for buffering, packet storage, and data-plane implementations. The architecture is suited to designs requiring parallel throughput, deterministic real-time behavior, or extensive I/O. Designers must also account for configuration storage, auxiliary supply rails, clock distribution, bank-specific voltage requirements, and the thermal demands of a large BGA device. Typical uses include network packet processing, telecom line-card and aggregation equipment, industrial control, high-speed data acquisition, digital signal processing, and embedded test systems. The 448 I/O sites and large logic capacity suit designs connecting multiple buses or external memories. The device can also support serial transceiver, clock, and digital signal-processing functions when the selected design and package connections permit them. Board design should follow the AMD Virtex-4 package pinout files and the manufacturer configuration guidance. Decoupling, multilayer return paths, controlled clock routing, and exposed-pad heat removal are critical in a 668-ball FCBGA layout. Configuration should include proper startup sequencing and a dependable completion indication, while unused pins and banks should follow the family guidance to avoid unnecessary signal activity. This product record combines package, resource, interface, and application information with practical replacement guidance. It also identifies same-footprint Virtex-4 LX options, distinguishes industrial and commercial temperature variants, and highlights the need to verify configuration compatibility before substituting a device in an existing board.

RFQ যোগাযোগ
XC4VLX25-11FFG668C - 24,192-Cell Virtex-4 LX FPGA | AMD
XC4VLX25-11FFG668C

XC4VLX25-11FFG668C - 24,192-Cell Virtex-4 LX FPGA | AMD

The AMD XC4VLX25-11FFG668C is a Virtex-4 LX field-programmable gate array with 24,192 logic cells, 2,688 configurable logic blocks, 448 I/O sites, and a 668-ball FCBGA package. Its -11 speed grade supports operation up to 1,205 MHz, making the device suitable for logic-intensive systems requiring high-performance parallel processing and programmable digital architectures. A field-programmable gate array is a semiconductor whose logic, interconnect, and I/O resources can be configured after fabrication. The FPGA product hierarchy extends from programmable logic devices to field-programmable gate arrays and then to general-purpose semiconductor logic. Virtex-4 LX devices combine configurable logic blocks, block RAM, dedicated DSP resources, and selectable I/O standards within a single CMOS device. The XC4VLX25 device provides 24,192 logic cells organized into 2,688 configurable logic blocks. Its 448 I/O sites support board-level connectivity for parallel buses, control signals, high-speed interfaces, memory connections, and external peripherals. The 668-ball FCBGA package uses a 1.00 mm ball pitch, providing a compact surface-mount solution for dense FPGA boards. The -11 designation identifies the device's performance grade. The -11 grade can reach a maximum clock frequency of 1,205 MHz according to the listed device specifications. This performance is useful for parallel data processing, protocol handling, digital filtering, embedded control, and accelerator logic. The 24,192-cell density provides substantially more logic capacity than a basic programmable-logic device while retaining the flexibility of FPGA configuration and field upgrades. Typical uses include industrial control systems, communications infrastructure, instrumentation, video-processing front ends, test equipment, and embedded signal-processing platforms. Engineers can implement finite-state machines, parallel datapaths, packet-processing engines, and mixed control/logic functions in one device. The 448 I/O sites also allow high pin-count designs to be consolidated without relying on several lower-density programmable components. PCB design should follow the AMD package pinout files for the exact ordering code and ball assignment. Differential pairs, supply distribution, decoupling, and configurable I/O standards require careful planning because a footprint-compatible replacement does not automatically guarantee identical timing, voltage, or legacy package behavior. Verify the bitstream target and system constraints before substituting another grade. This product page combines the key device identity, package facts, upgrade paths, application guidance, and engineering cautions needed to evaluate the XC4VLX25-11FFG668C. It also distinguishes true same-package family alternatives from broader FPGA conversions that require different tools, footprints, bitstreams, or board-level redesign.

RFQ যোগাযোগ
XC4VLX25-11FFG668I - 24,192 Logic Cell FPGA | AMD | Industrial
XC4VLX25-11FFG668I

XC4VLX25-11FFG668I - 24,192 Logic Cell FPGA | AMD | Industrial

The AMD XC4VLX25-11FFG668I is a Virtex-4 LX field-programmable gate array with 24,192 logic cells, 448 I/O, and an 11 speed grade, housed in a 668-pin FCBGA package. It is a CMOS programmable-logic device intended for demanding embedded systems requiring parallel processing, high-speed interfaces, and configurable digital logic. The -11 suffix identifies the device speed grade, while FFG668 identifies the 668-ball FCBGA package. An FPGA is a programmable semiconductor in the semiconductor hierarchy. Unlike fixed-function logic, an FPGA combines configurable logic blocks, programmable input/output logic, block RAM, DSP resources, clocking, and dedicated I/O into one device. The Virtex-4 LX family extends this architecture into high-performance systems used for embedded processing, communications, networking, industrial control, and test equipment. The XC4VLX25 provides 24,192 logic cells and 448 I/O according to the AMD distributor catalog data. Its 11 speed grade occupies the middle of the Virtex-4 performance range, between the -10 and -12 grades. The 668-ball FCBGA package supports dense board-level interconnect, while its 1.27 mm ball pitch and large thermal footprint require careful PCB layout, plane assignment, and heat management. Virtex-4 devices combine programmable logic with dedicated hardware resources that can accelerate repetitive digital operations. Designers can implement parallel datapaths, packet processing, protocol bridges, control logic, and high-speed serial interfaces while using clock-management resources to distribute and condition timing signals. The architecture supports multiple I/O standards, but each interface must satisfy the voltage, drive, timing, and termination requirements defined for the selected bank configuration. Typical applications include industrial automation, telecommunications equipment, network appliances, instrumentation, defense systems, embedded video processing, and high-speed test equipment. The large I/O count is particularly useful when a design combines wide parallel buses, memory interfaces, control signals, and multiple high-speed links. Configuration storage and startup behavior must also be planned around the system power sequence. For PCB implementation, follow the AMD Virtex-4 package pinout files and place decoupling and power-plane structures directly beneath the device. Validate every pin assignment against the package file for the exact speed-grade suffix. Do not reuse a layout intended for a different Virtex-4 package without checking ball assignments, power requirements, and differential-pair routing. This page consolidates the device specifications, package constraints, lifecycle information, and practical selection guidance into one engineering reference. It also identifies same-family drop-in alternatives and distinguishes their speed or temperature grades from the industrial-grade target for design review and sourcing decisions.

RFQ যোগাযোগ