মাইক্রোকন্ট্রোলার

পণ্য (20,000+)

MKL15Z128VLH4R - ARM Cortex-M0+ 48MHz MCU, 128KB Flash | NXP
MKL15Z128VLH4R

MKL15Z128VLH4R - ARM Cortex-M0+ 48MHz MCU, 128KB Flash | NXP

The NXP Semiconductors MKL15Z128VLH4R is an ultra-low-power 32-bit ARM Cortex-M0+ microcontroller operating at 48 MHz with 128 KB of flash and 16 KB of SRAM, housed in a 64-pin LQFP (10x10 mm) package with tape-and-reel packaging. As a member of the Kinetis KL1x family, the part integrates USB 2.0 OTG full-speed, flexible low-power modes, a 12-bit SAR ADC, and a rich set of serial peripherals. The 'R' suffix indicates tape-and-reel delivery, while the base MKL15Z128VLH4 ships in tray. The 64-LQFP package is the standard footprint across the KL14/KL15/KL16/KL17 families, enabling PCB reuse when scaling designs. An ARM Cortex-M0+ microcontroller is a 32-bit RISC processor core designed by Arm for energy-constrained embedded applications, featuring a 2-stage pipeline, single-cycle 32x32 multiplier, and Thumb-2 instruction set. It belongs to the broader hierarchy of ARM Cortex-M processors (Cortex-M0/M0+/M3/M4/M7), with the M0+ positioned as the most power-efficient tier while retaining full instruction compatibility with larger cores. Kinetis L series microcontrollers specifically target battery-powered and portable devices through aggressive use of multiple low-power modes (Run, Wait, Stop, VLPR, VLPW, VLPS, LLWU). Key features of the MKL15Z128VLH4R include 128 KB program flash, 16 KB SRAM, USB 2.0 full-speed OTG with on-chip transceiver, an 8-channel 12-bit ADC, two 16-bit timers, a low-power timer, RTC, CMP, and multiple serial communication modules (UART, SPI, I2C). The device supports 1.71V to 3.6V supply and provides 54 GPIO pins plus dedicated USB DP/DM. Hardware cryptography, tamper detection, and secure firmware update are not present on this KL15 sub-family, distinguishing it from the higher-end Kinetis K-series. From an architectural perspective, the M0+ core delivers 0.93 DMIPS/MHz while drawing only 9 uA/MHz in Run mode at 3V, and as low as 2.1 uA in VLPS mode with RTC retention. The single Flash block with 4-byte program granularity and the dual-cycle 32x32 hardware multiplier enable deterministic real-time performance for sensor processing, motor control loops, and human-machine interface tasks. Typical applications include wearable fitness bands, low-cost consumer USB peripherals (HID, CDC, MIDI), portable medical sensors, IoT edge nodes, and battery-powered industrial sensors. The integrated USB 2.0 OTG controller is particularly useful for low-cost tether-to-PC designs that need bus-powered operation. When designing with this part, prioritize supply decoupling (0.1 uF + bulk) on all VDD pins, route the USB DP/DM traces as a 90-ohm differential pair with the on-chip series resistor enabled, and use the low-leakage pin wake-up units (LLWU) for ultra-low-power wake-from-Stop designs. This page synthesizes distributor pricing, parametric comparison, and drop-in alternatives across the Kinetis L family and competing Cortex-M0+ MCUs - information not aggregated in any single manufacturer datasheet.

RFQ যোগাযোগ
MKL15Z32VFT4 - 48MHz Cortex-M0+ 32KB Flash MCU | NXP
MKL15Z32VFT4

MKL15Z32VFT4 - 48MHz Cortex-M0+ 32KB Flash MCU | NXP

The NXP MKL15Z32VFT4 is an ARM Cortex-M0+ based ultra-low-power microcontroller from the Kinetis KL1x family, featuring 32KB flash, 4KB SRAM, and a 48 MHz core clock, housed in a 48-pin QFN (7x7 mm) package with exposed pad. What is a Kinetis KL1x microcontroller? The Kinetis KL1x is NXP's general-purpose ultra-low-power MCU family that builds on the KL0x family by adding more memory, communication peripherals, and analog options. The MKL15Z32VFT4 sits in this hierarchy as: microcontroller -> 32-bit MCU -> ARM Cortex-M0+ MCU -> Kinetis family -> KL1x sub-family -> KL15 sub-sub-family. The Cortex-M0+ core itself is the smallest, most energy-efficient ARM core, designed for cost-sensitive embedded applications where deterministic low power matters more than raw performance. Key features include an operating voltage range of 1.71V to 3.6V, an industrial temperature range of -40C to +105C, a 12-bit ADC, multiple serial interfaces, low-power operating modes with sub-uA sleep currents, and an integrated 32KB flash memory array. The device also integrates a 16-bit SAR ADC, comparators, and a flexible low-power timer, making it suitable for battery-powered sensor products. Architecturally, the MKL15Z32VFT4 leverages the Cortex-M0+ core's two-stage pipeline and single-cycle I/O access, paired with NXP's low-leakage process technology and an integrated voltage regulator. The 48 MHz core clock delivers 0.93 DMIPS/MHz and supports both Thumb and Thumb-2 instruction subsets. The chip integrates up to 40 GPIO, multiple DMA channels, and a peripheral crossbar for flexible signal routing. Typical applications include wearable health monitors, battery-powered IoT sensor nodes, low-end consumer electronics, and industrial control nodes where energy harvesting or coin-cell operation is desired. The exposed thermal pad on the QFN package improves dissipation for sustained 48 MHz operation. When designing with this part, pay attention to the exposed pad (EP) connection to the ground plane for thermal and electrical performance. Use NXP's Kinetis Design Studio or MCUXpresso toolchain for firmware development, and ensure the brown-out and low-voltage detect settings match the battery chemistry profile. This page synthesizes distributor pricing, drop-in alternatives from the same Kinetis family, and practical design notes not found in the manufacturer datasheet alone.

RFQ যোগাযোগ
MKL15Z64VFT4 - 48MHz Cortex-M0+ MCU, 64KB Flash | NXP
MKL15Z64VFT4

MKL15Z64VFT4 - 48MHz Cortex-M0+ MCU, 64KB Flash | NXP

The NXP Semiconductors MKL15Z64VFT4 is an ARM Cortex-M0+ based ultra-low-power microcontroller from the Kinetis KL1x sub-family, offering 48 MHz CPU performance with 64 KB of embedded Flash and 8 KB of SRAM in a 48-pin QFN (7x7 mm) package. According to NXP product information, this MCU integrates connectivity peripherals including I2C, LINbus, SPI, UART/USART, and a Touch Sensing Interface (TSI), along with on-chip analog and timing peripherals for embedded designs. What is a Kinetis KL1x microcontroller? The Kinetis KL1x family is a general-purpose ultra-low-power 32-bit MCU line from NXP based on the ARM Cortex-M0+ core, succeeding the original Kinetis KL0x family with additional memory, communications, and analog peripheral options. Within the hierarchy, KL1x sits beneath Kinetis K-series Cortex-M4 parts (K10/K20/K40/K60) and above KL0x in NXP's ultra-low-power portfolio, providing a migration path to higher performance while preserving the same peripheral IP and toolchain. Key technical features include Brown-out Detect/Reset, Low-Voltage Detect (LVD), Power-On Reset (POR), Direct Memory Access (DMA), a Watchdog Timer (WDT), and PWM channels suitable for motor control or LED driving. The device runs from a single 3.3 V supply and supports a wide operating temperature range suitable for industrial applications. The integrated TSI block enables capacitive touch user interfaces without external touch controllers. Architecture-wise, the KL1x uses the efficient ARM Cortex-M0+ core with single-cycle I/O access, Thumb-2 instruction set, and a deterministic interrupt controller. The 64 KB Flash program memory is split into a primary block plus a separate FlexMemory or EEPROM emulation region depending on configuration, while the 8 KB SRAM provides ample space for protocol stacks and application state. Typical applications include ultra-low-power industrial sensor nodes, capacitive touch user interfaces, home appliances with LIN-bus connectivity, low-end consumer electronics, and battery-powered IoT edge devices. The combination of low-power modes, multiple serial interfaces, and TSI makes the KL1x well-suited to mains-powered and battery-powered products alike. When designing with this part, ensure the PCB footprint matches the 48-QFN (7x7) land pattern with proper thermal via arrangement under the exposed pad. The NXP Kinetis SDK and Processor Expert tooling provide firmware drivers; pin multiplexing must be configured via the PORT and SIM modules before peripheral activation. Selected power modes such as VLLS0/VLLS1 should be evaluated carefully against wakeup source requirements. This page consolidates distributor pricing, package-equivalent KL1x alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFQ যোগাযোগ
MKL16Z128VLH4 - 48MHz Cortex-M0+ MCU 128KB Flash LQFP-64 | NXP
MKL16Z128VLH4

MKL16Z128VLH4 - 48MHz Cortex-M0+ MCU 128KB Flash LQFP-64 | NXP

The NXP Semiconductors MKL16Z128VLH4 is a Kinetis KL16 ultra-low-power microcontroller featuring an ARM Cortex-M0+ core running at up to 48 MHz, with 128 KB of on-chip Flash and 16 KB of SRAM, housed in a 64-pin LQFP (10x10 mm) package. It integrates a full-speed USB 2.0 device controller, 12-bit ADC, low-power timer (LPTMR), real-time clock (RTC), and multiple serial interfaces including UART, SPI, and I²C. An MCU (microcontroller unit) is a single-chip computer that integrates a processor core, memory, and programmable peripherals, sitting at the top of the embedded computing hierarchy: microcontroller -> microprocessor -> semiconductor. The Kinetis KL1x sub-family extends the KL0x with additional memory and connectivity, and the KL16 variant adds USB while maintaining the ultra-low-power modes that make Kinetis parts popular for battery-powered designs. Key features include 48 MHz maximum CPU frequency, 128 KB program Flash, 16 KB SRAM, USB 2.0 Full-Speed device with on-chip transceiver, 12-bit SAR ADC with up to 16 channels, multiple low-power modes (Wait, Stop, VLPR, VLPS), and a low-power timer that can run in all power modes. The 64-LQFP footprint (10x10 mm) provides ample GPIO for typical embedded applications. The KL16 architecture pairs an ARM Cortex-M0+ core (single-cycle 32-bit multiply, Harvard bus, NVIC with 32 interrupts) with NXP's ultra-low-power design techniques, including multiple clock gating domains and fast wake-up from low-power states. On-chip peripherals are mapped through an AIPS-Lite bus structure that simplifies DMA and interrupt routing for deterministic real-time behavior. Typical applications include wearable health and fitness devices, USB peripherals (HID, CDC, custom classes), home automation sensors, smart metering endpoints, and portable consumer electronics. The integrated USB 2.0 FS device eliminates the need for an external transceiver, reducing BOM cost in USB HID, CDC, or vendor-class device designs. When designing with this part, choose the correct Flash size variant in the family (KL16: 64KB/128KB/256KB) to match your code footprint. Take advantage of the multiple low-power modes for battery operation, but verify that any peripheral used in VLPS/VLPR is in the chip-specific low-power compatibility list. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, helping engineers and procurement teams evaluate the MKL16Z128VLH4 for new designs and second-source decisions.

RFQ যোগাযোগ
MKL16Z256VLH4 - 48MHz Cortex-M0+ 256KB Flash MCU | NXP
MKL16Z256VLH4

MKL16Z256VLH4 - 48MHz Cortex-M0+ 256KB Flash MCU | NXP

The NXP Semiconductors MKL16Z256VLH4 is a 32-bit ARM Cortex-M0+ microcontroller from the Kinetis KL1 family, running at up to 48 MHz with 256KB (256K x 8) on-chip flash memory, housed in a 64-pin LQFP (10x10 mm) surface-mount package. A microcontroller (MCU) is a single-chip embedded computer that integrates a processor core, program memory, data memory, and peripherals on one die, serving as the compute element at the heart of embedded systems within the broader power-and-control hierarchy of modern electronics. The Kinetis KL series belongs to the class of ultra-low-power 32-bit MCUs built on the energy-efficient ARM Cortex-M0+ architecture. Key features of the MKL16Z256VLH4 include the FlexUSB module for USB device connectivity, an integrated segment LCD controller for direct glass drive, and the exceptional energy efficiency that defines the Kinetis L family, combining the ease of use of the Cortex-M0+ core with rich peripheral integration. Architecturally, the device pairs the two-stage Cortex-M0+ pipeline with NXP Kinetis peripheral sets, enabling scalable designs that can migrate across the Kinetis 32-bit portfolio while preserving software enablement. The 256KB flash provides ample room for protocol stacks such as USB HID/CDC classes and UI code driving the segment LCD. Typical applications include battery-powered human-machine interfaces with LCD displays, USB-connected sensor endpoints, consumer appliance panels, and industrial low-power monitoring nodes where energy efficiency and display capability matter. For design, plan USB and LCD pin assignments early, since the FlexUSB and segment LCD controller share the finite I/O pool of the 64-LQFP package. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ যোগাযোগ
MKL16Z32VFT4 - 48MHz Cortex-M0+ MCU 32KB Flash | NXP
MKL16Z32VFT4

MKL16Z32VFT4 - 48MHz Cortex-M0+ MCU 32KB Flash | NXP

The NXP Semiconductors MKL16Z32VFT4 is a Kinetis KL16 series 32-bit microcontroller built on an Arm Cortex-M0+ core running at up to 48 MHz, integrating 32 KB of flash memory and 4 KB of SRAM in a 48-pin QFN (7x7 mm) package with exposed pad. It operates from a 1.8V, 2.5V, or 3.3V supply per distributor listings from Arrow and DigiKey. A microcontroller (MCU) is a single integrated circuit that combines a processor core, memory, and peripherals into one chip, forming the lowest layer of the embedded-system hierarchy: MCU family (Kinetis KL1x) -> general-purpose MCU -> embedded processor -> semiconductor device. The KL1x family extends the ultra-low-power KL0x family with additional memory, communication, and analog peripheral options. Key features include the Cortex-M0+ core, the most energy-efficient Arm processor profile, delivering 48 MHz performance at very low dynamic current; 32 KB on-chip flash for program storage and 4 KB SRAM for data; and a rich peripheral set typical of the KL16 sub-family, including serial communication interfaces (UART, SPI, I2C), a 12-bit ADC, timers, and GPIO, plus low-power modes suited to battery-operated products. Technically, the Kinetis KL16 sub-family shares the same platform architecture as other Kinetis MCUs, with a crossbar bus, peripheral clock gating, and bitband-style GPIO control. The exposed-pad QFN package improves thermal and electrical performance versus a standard QFN, and the 7x7 mm footprint with 0.5 mm pitch suits compact two- and four-layer PCBs. Typical applications include portable and battery-powered consumer devices, sensor nodes and IoT end points, human-interface and touch sensing products, and small industrial control boards where ultra-low power and a small footprint matter more than raw processing throughput. A key design consideration is memory headroom: at 32 KB flash and 4 KB SRAM, code size and stack usage should be budgeted early, and the pin-compatible larger-memory siblings in the same package can be used as upgrade paths. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ যোগাযোগ
MKL16Z64VFT4R - 48MHz Cortex-M0+ 64KB Flash MCU | NXP
MKL16Z64VFT4R

MKL16Z64VFT4R - 48MHz Cortex-M0+ 64KB Flash MCU | NXP

The NXP MKL16Z64VFT4R is an ultra-low-power 32-bit ARM Cortex-M0+ microcontroller from the Kinetis KL1x family, running up to 48 MHz with 64 KB of on-chip Flash and 8 KB of SRAM, supplied in a 48-pin QFN (7x7 mm) package with an exposed thermal pad. The Kinetis KL16 sub-family targets general-purpose low-power applications that need USB connectivity, segment-LCD support, and a richer analog peripheral set than the entry-level KL0x family, while preserving the KL0x energy-efficiency envelope. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, and a fixed set of peripherals (timers, ADC, communication controllers, GPIO) into one package. The ARM Cortex-M0+ core used here is the most energy-efficient member of the Cortex-M family, designed for deterministic real-time control in cost-constrained embedded products. The Kinetis family sits within NXP's broader portfolio of 32-bit microcontrollers, which in turn belongs to the larger category of microcontrollers and microprocessors (semiconductor -> IC -> MCU -> Kinetis -> KL1x). Key specifications include a 48 MHz maximum core clock, 64 KB program Flash, 8 KB SRAM, USB 2.0 full-speed device with on-chip transceiver, segment-LCD driver (up to 8x36 or 4x40 segments), 12-bit SAR ADC with up to 16 single-ended channels, low-power UART/SPI/I2C peripherals, and an operating voltage range of 1.71 V to 3.6 V. The device also integrates a low-power RTC, multiple low-power modes (VLLS0..3, LLS, VLPR, STOP), DMA, and a low-power timer for periodic wake-up. The 48-QFN exposed-pad package provides a low thermal resistance and a compact 7x7 mm footprint for space-constrained boards. Architecturally, the KL16 combines a Cortex-M0+ core, single-cycle I/O bus, and a peripheral bridge feeding independent timer, communication, and analog subsystems. The on-chip voltage regulator supports internal core supply from a single external 1.71-3.6 V rail, eliminating the need for multiple external supplies. Hardware AES is not present on this sub-family, but the segment LCD controller, USB FS device, and 12-bit ADC give it strong suitability for human-interface, metering, and consumer products. Typical applications include battery-powered sensor nodes, USB-CDC or USB-HID consumer accessories, small appliances with segment-LCD displays, electronic shelf labels, low-end smart meters, and portable medical accessories. The integrated USB transceiver is a notable differentiator for cable-connected low-power peripherals. The combination of segment-LCD, USB, and Cortex-M0+ energy efficiency is uncommon at this price/performance tier. When designing with this part, allocate the exposed pad (EP) on the PCB as a solid copper pour connected to ground to meet thermal and electrical performance; route USB DP/DM as a 90 ohm differential pair and place the 48 MHz crystal within 5 mm of the XTAL pins. Decouple VDD/VREFL/VREFH with 100 nF ceramics placed as close as possible to the respective pins. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFQ যোগাযোগ
MKL17Z128VMP4 - 48MHz Cortex-M0+ 128KB Flash MCU | NXP
MKL17Z128VMP4

MKL17Z128VMP4 - 48MHz Cortex-M0+ 128KB Flash MCU | NXP

The NXP MKL17Z128VMP4 is a Kinetis KL17 ultra-low-power 32-bit microcontroller based on the ARM Cortex-M0+ core, operating at up to 48 MHz with 128 KB of flash and 32 KB of SRAM, housed in a 64-pin MAPBGA (5x5 mm) package. It targets battery-powered and energy-harvesting applications where active-mode performance and deep-sleep current must coexist in a small footprint. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory, working RAM, and a set of on-chip peripherals such as timers, ADCs, and communication controllers. Cortex-M0+ parts occupy the ultra-low-power end of the ARM-M hierarchy and are typically used as microcontrollers -> embedded controllers -> semiconductor devices. The Kinetis KL1x family specifically adds segment-LCD controllers, USB-FS device, and richer analog compared to the entry-level KL0x line. Key features of the MKL17Z128VMP4 include a 16-bit SAR ADC with DMA support, 12-bit DAC, low-power timer, multiple low-power modes (VLLS0/1/3, LLPS, Stop, Wait, Run), flexible USB device (USB-FS) on selected variants, segment LCD controller up to 47 segments, and a 54 GPIO count. The 128 KB flash with 32 KB SRAM ratio makes it suitable for protocol stacks such as BLE HCI or Thread host layers while keeping peripheral support intact. Architecturally, the KL17 uses the Cortex-M0+ with a single-cycle multiplier and a 2-stage pipeline, achieving 0.93 DMIPS/MHz. The wide voltage range of 1.71 V to 3.6 V allows direct connection to single-cell Li-ion, coin cells, or regulated 3.3 V rails, while integrated DC-DC buck converter support simplifies multi-rail designs and improves efficiency in sleep modes where quiescent current drops below 1 uA. Typical applications include wearable fitness bands with segment-LCD displays, battery-powered wireless sensor nodes, USB-CDC/HID peripherals, industrial HMI panels with segment displays, and low-end home appliances. The combination of USB-FS, segment LCD, and low leakage makes the KL17 a strong fit for any 3.3 V coin-cell product that needs a bright display and a wired diagnostic port. When designing with this MCU, place the 0.1 uF decoupling capacitors as close as possible to each VDD/VSS pair and route the VBAT domain separately if a backup RTC battery is used. The segment-LCD bias network requires external charge-pump capacitors; insufficient capacitance leads to display ghosting at extreme temperatures below -20 C. This page synthesizes distributor pricing, drop-in Kinetis same-family alternatives, and practical design notes not consolidated on any single manufacturer page.

RFQ যোগাযোগ
MKL17Z64VDA4 - 48MHz Cortex-M0+ MCU, 64KB Flash | NXP
MKL17Z64VDA4

MKL17Z64VDA4 - 48MHz Cortex-M0+ MCU, 64KB Flash | NXP

The NXP MKL17Z64VDA4 is a 32-bit ultra-low-power microcontroller based on the ARM Cortex-M0+ core running at 48 MHz, with 64 KB flash memory and 16 KB SRAM, housed in a 36-ball XFBGA (MAPBGA-36) package measuring just 3.5 x 3.5 mm. A microcontroller unit (MCU) is a single integrated circuit that combines a processor core, memory, and programmable peripherals into one chip, forming the lowest level of the embedded computing hierarchy (MCU -> embedded processor -> microprocessor -> SoC). The Kinetis KL family from NXP sits in the ultra-low-power tier of this hierarchy, targeting battery-operated and space-constrained designs where every microamp of current matters. Key features of the MKL17Z64VDA4 include the energy-efficient Cortex-M0+ core, 64 KB (64K x 8) of on-chip flash program memory for firmware storage, 16 KB of SRAM for data and stack, and USB connectivity as noted on the NXP product page. The extremely small 36-XFBGA package with 0.5 mm ball pitch enables placement on the underside of dense PCBs, freeing board area for sensors, radios, or displays in wearables and IoT end nodes. Technically, the device belongs to the Kinetis KL1x general-purpose ultra-low-power family, which provides additional memory, communications, and analog peripheral options beyond the entry-level KL0x family. The 48 MHz Cortex-M0+ executes Thumb instruction set code with a two-stage pipeline, delivering efficient real-time control with a compact gate count and correspondingly low dynamic and static power consumption. Typical applications include battery-powered wearable devices, smart sensors and IoT end nodes, portable medical accessories, and compact human-interface controllers where small footprint and low standby power dominate the selection criteria. When designing with a 3.5 x 3.5 mm BGA, plan the PCB with via-in-pad or escape routing to all 36 balls, and budget rework capability carefully since BGA inspection requires X-ray equipment. This page synthesizes distributor availability data, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, with all pricing referenced as of 2026-10-18.

RFQ যোগাযোগ
MKL25Z128VLK4 - 48MHz Cortex-M0+ 128KB MCU | NXP
MKL25Z128VLK4

MKL25Z128VLK4 - 48MHz Cortex-M0+ 128KB MCU | NXP

The NXP Semiconductors MKL25Z128VLK4 is an ultra-low-power 32-bit Kinetis KL2 microcontroller built around an Arm Cortex-M0+ processor operating at 48 MHz, with 128 KB of flash memory and an 80-pin LQFP package measuring 12 x 12 mm. It is suited to embedded control, USB-connected sensing, portable instrumentation, and low-power edge systems. According to the distributor records, the device also provides 16 KB SRAM and full-speed USB. A microcontroller is a compact computer integrated with nonvolatile program memory, working RAM, digital peripherals, and I/O interfaces. It executes firmware, samples sensors, controls actuators, and manages communications without requiring a separate processor. The MKL25Z128VLK4 belongs to the hierarchy Kinetis KL25 microcontroller -> Arm Cortex-M0+ MCU -> 32-bit microcontroller -> embedded processor -> semiconductor. Its principal features include 128 KB of flash for firmware storage, 16 KB of SRAM for runtime data, a 48 MHz Cortex-M0+ core, and full-speed USB. The 80-LQFP package provides enough external connections for mixed-signal products, interface-heavy controls, and designs that favor a leaded package for inspection or assembly. The Kinetis KL2x family also supports migration paths across Kinetis KL1x, KL2x, KL3x, and KL4x devices, as stated by NXP. The Cortex-M0+ architecture favors energy-efficient embedded execution while retaining a conventional 32-bit instruction set and integrated interrupt handling. Flash capacity allows substantially larger applications than 64 KB-class devices, while SRAM supports packet buffers, sampled data, display or communication state, and real-time control tasks. USB integration can reduce the external controller count in connected products. Typical uses include USB data loggers, building-control endpoints, compact industrial monitors, sensor-hub boards, access-control terminals, and low-power portable instruments. The 48 MHz processing rate is suitable for concurrent USB traffic, control loops, protocol handling, and supervisory tasks where workload is modest enough not to require a higher-performance Cortex-M core. Designers should preserve the package pin assignments, supported supply ranges, decoupling requirements, and clock configuration when creating a PCB. The 80-LQFP footprint also requires adequate solder-mask clearance and inspection because its closely spaced leads can complicate manual rework. Firmware development should account for memory-map constraints, USB clocking, peripheral pin multiplexing, and low-power state transitions. This product page consolidates verified manufacturer and distributor identity data, sourcing links, application guidance, and compatibility analysis. Because the supplied sources do not expose complete electrical ratings, pricing values, or a verified pin list, missing fields are explicitly marked rather than inferred.

RFQ যোগাযোগ
MKL26Z128CAL4R - 48MHz Cortex-M0+ 128KB Flash MCU | NXP
MKL26Z128CAL4R

MKL26Z128CAL4R - 48MHz Cortex-M0+ 128KB Flash MCU | NXP

The NXP MKL26Z128CAL4R is a Kinetis KL26 sub-family 32-bit ARM Cortex-M0+ microcontroller running up to 48 MHz, integrating 128 KB of flash and 16 KB of SRAM, with a full-speed USB 2.0 device controller (crystal-less capable), and packaged in a compact 36-ball WLCSP measuring approximately 2.37 mm x 2.46 mm. It is one of the lowest-power Kinetis Cortex-M0+ MCUs in NXP's ultra-low-power portfolio, designed for portable and battery-powered applications where PCB real estate is at a premium. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals such as timers, ADCs, communication interfaces, and GPIO. The Cortex-M0+ is ARM's smallest and most energy-efficient application processor core, optimized for deterministic interrupt response and minimal gate count. Microcontrollers sit at the heart of embedded systems, providing local intelligence for sensors, actuators, user interfaces, and connectivity functions across consumer, industrial, and IoT markets. Key features of the MKL26Z128CAL4R include the Cortex-M0+ core with single-cycle multiplication, an integrated low-power USB 2.0 full-speed device controller that eliminates the need for an external crystal, multiple low-power modes (Run, Wait, Stop, VLPR, VLPW, VLPS, LLS, VLLSx), a 12-bit SAR ADC, high-speed analog comparators, a real-time clock, and a flexible low-power timer (LPTMR). The device supports 1.71 V to 3.6 V supply operation and is offered in a tiny 36-ball WLCSP for space-constrained designs such as wearables and USB dongles. The MKL26Z128CAL4R uses a 32-bit ARMv6-M architecture with the Thumb/Thumb-2 instruction set, giving it strong code density while keeping silicon area small. Its multi-mode low-power architecture allows peripherals like the ADC and comparators to operate in low-power modes independently of the CPU, reducing total system energy. The inclusion of an integrated USB PHY with on-chip 3.3 V regulator and a 1 kHz low-power timer makes it attractive for always-on, event-driven products. Typical applications include USB HID peripherals (keyboards, mice, game controllers), wearable fitness bands, BLE/ZigBee host microcontrollers, sensor hub MCUs, low-end medical sensors, and compact IoT end nodes. The crystal-less USB and tiny WLCSP package make it especially attractive for USB dongles, gaming peripherals, and other form-factor-constrained consumer electronics. When designing with the MKL26Z128CAL4R, pay attention to the WLCSP PCB layout - the 0.4 mm ball pitch requires HDI PCB manufacturing and careful via.2.3 pad design for reliable assembly. Provide adequate decoupling (one 100 nF and one 4.7 uF X5R ceramic) within 2 mm of the power pins to maintain supply integrity during USB transitions. This page synthesizes distributor pricing, drop-in alternatives within the same WLCSP-36 footprint, and practical design notes not found in the manufacturer datasheet alone.

RFQ যোগাযোগ
MKL26Z128VMC4 - 48MHz Cortex-M0+ 128KB USB MCU | NXP
MKL26Z128VMC4

MKL26Z128VMC4 - 48MHz Cortex-M0+ 128KB USB MCU | NXP

The NXP MKL26Z128VMC4 is a Kinetis KL2x 32-bit microcontroller with an ARM Cortex-M0+ core running at 48 MHz, 128 KB flash memory, and a full-speed USB 2.0 On-the-Go (OTG) controller, housed in a 121-ball MAPBGA (8x8 mm) package. A microcontroller unit (MCU) is a single integrated circuit that combines a processor core, memory, and peripherals to execute dedicated embedded control tasks. Within the power/efficiency hierarchy of embedded processors, the Kinetis KL2x family sits in the ultra-low-power MCU segment, extending the KL1x series with USB connectivity while remaining compatible with Kinetis K20 (Cortex-M4) and other KL-series devices, providing a clear migration path. Key features include the 48 MHz Cortex-M0+ core optimized for low dynamic power, 128 KB of program flash, USB OTG plus crystal-less full-speed USB device operation, and 84 general-purpose I/O lines. Connectivity spans I2C, LINbus, SPI, UART/USART, and USB; system peripherals include DMA, I2S, PWM, brown-out detect/reset, low-voltage detect, power-on reset, and a watchdog timer. Technically, the Cortex-M0+ architecture delivers ARM code density with a two-stage pipeline and low gate count, while the KL2x power architecture provides multiple low-power modes with fast wake-up, making it suitable for battery-powered USB peripherals. The mixed-signal integration (I2S, 12/16-bit ADC capability per family documentation) supports audio and sensor aggregation designs. Typical applications include USB HID device peripherals, wearable and portable battery-powered products, sensor hubs, and small HMI systems. The 121-ball 8x8 mm MAPBGA keeps board area compact while exposing 84 I/Os. Design consideration: the MAPBGA-121 footprint requires controlled-impedance fine-pitch BGA layout; plan an escape-routing layer strategy early. The USB OTG controller removes the need for an external crystal in device mode, saving BOM cost. This page synthesizes distributor pricing, drop-in same-family alternatives, comparison tables, and practical design notes not found in the manufacturer datasheet.

RFQ যোগাযোগ
MKL26Z256VMC4 - 48MHz ARM Cortex-M0+ MCU 256KB Flash | NXP
MKL26Z256VMC4

MKL26Z256VMC4 - 48MHz ARM Cortex-M0+ MCU 256KB Flash | NXP

The NXP Semiconductors MKL26Z256VMC4 is a 32-bit ARM Cortex-M0+ microcontroller from the Kinetis KL2x sub-family, integrating 256KB of flash memory and operating at a core frequency of 48 MHz. It is housed in a 121-pin MAPBGA (8x8 mm) package designed for ultra-low-power portable applications with on-chip full-speed USB 2.0 device or OTG support. The device targets battery-sensitive designs that need a Cortex-M0+ core with USB connectivity, segment LCD drivers, and a rich analog peripheral set. What is a Kinetis microcontroller? A Kinetis microcontroller (MCU) is a family of ARM Cortex-M based 32-bit microcontrollers from NXP Semiconductors designed for ultra-low-power embedded applications. The KL2x sub-family specifically adds a full-speed USB 2.0 controller (device or OTG) on top of the KL1x baseline, while maintaining the same Cortex-M0+ architecture and low-leakage power modes. This positions Kinetis MCUs in the broader product hierarchy as: ARM Cortex-M0+ -> Kinetis L series -> Kinetis KL2x sub-family -> NXP 32-bit microcontrollers -> embedded microcontrollers -> semiconductors. Key features of the MKL26Z256VMC4 include 256KB of on-chip flash, up to 32KB of SRAM, a full-speed USB 2.0 device/OTG controller with on-chip transceiver and 3.3V voltage regulator, a 12-bit SAR ADC with up to 16 single-ended channels, multiple low-power modes (VLLS0/1/3, LLS, VLPR, Wait, Stop), and segment LCD drivers capable of driving 8x36 or 4x40 segments. The 121-MAPBGA (8x8 mm) package provides high I/O density suitable for compact wearable and sensor-hub designs. Architecturally, the MKL26Z256VMC4 leverages the Cortex-M0+ core's Thumb-2 instruction set with a single-cycle multiplier and a 4-stage pipeline optimized for low active current (around 4 mA typical run current). On-chip peripherals include multiple low-power timers, an RTC, I2C, SPI, UART, FlexIO for flexible serial emulation, and a low-power segment LCD controller. The integrated 3.3V USB regulator eliminates the need for an external LDO on the USB bus. Typical applications span wearable health and fitness devices, USB HID peripherals (keyboards, game controllers, sensors), portable medical devices, industrial sensor hubs, and battery-powered IoT edge nodes. Its combination of USB, segment LCD, and Cortex-M0+ efficiency makes it well suited to battery-powered human-machine interface products. When designing with the MKL26Z256VMC4, ensure the 121-MAPBGA land pattern uses NSMD pads with proper via-in-pad or tented-via PCB design, place the 12 MHz or 16 kHz crystal load capacitors close to the XTAL pins, and follow NXP's hardware design guidelines for USB-OTG PHY routing (90 ohm differential, length matching, and a clean ground plane). Decouple VDD with 100 nF plus 4.7 uF bulk capacitors near each supply pin. This page synthesizes NXP manufacturer specifications, distributor pricing, drop-in alternatives, and practical PCB design guidance not found in any single datasheet - giving engineers a single, citable reference for evaluating the MKL26Z256VMC4 against USB-capable Cortex-M0+ microcontrollers from competing vendors.

RFQ যোগাযোগ
MKL26Z32VLH4 - Kinetis KL26 48MHz Cortex-M0+ MCU, 32KB Flash, USB | NXP
MKL26Z32VLH4

MKL26Z32VLH4 - Kinetis KL26 48MHz Cortex-M0+ MCU, 32KB Flash, USB | NXP

The NXP Semiconductors MKL26Z32VLH4 is a Kinetis KL2x family 32-bit microcontroller built on the ARM Cortex-M0+ core, running up to 48 MHz, with 32 KB of program flash and integrated full-speed USB 2.0 (OTG or crystal-less device) in a 64-pin LQFP (10x10 mm) package. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory, and programmable peripherals. Within the broader semiconductor taxonomy, the MKL26Z32VLH4 sits in the hierarchy MCU -> 32-bit MCU -> ARM Cortex-M MCU -> low-power MCU -> Kinetis family. The Cortex-M0+ core is the smallest and most energy-efficient member of the ARM Cortex-M family, designed for cost-sensitive embedded applications where deterministic interrupt response and low active/idle power matter more than raw compute. Key features include 32 KB flash, 4 KB SRAM, a full-speed USB 2.0 controller with on-chip transceiver, a low-power ARM Cortex-M0+ core, segment LCD controller (SLCD) option on related variants, multiple low-power modes (run, wait, stop, VLPRMPVLLS3), and a flexible low-power peripheral set including 12-bit ADC, 16-bit timers, LPUART, I2C, SPI, and USB. The device also integrates an internal 32 kHz and 8 MHz reference, simplifying BOM and supporting crystal-less USB operation in the KL2x sub-family. Architecturally, the KL26 leverages Freescale/NXP's low-leakage process and a tightly coupled Cortex-M0+ pipeline with a single-cycle I/O port, achieving CoreMark/mW efficiency that puts it ahead of many 8-bit MCUs while retaining 32-bit throughput. The 48 MHz core mark, combined with hardware multiply/divide, gives roughly 0.93 DMIPS/MHz. Typical applications include USB HID peripherals (keyboards, mice, remotes), wearable fitness bands, low-cost data loggers, sensor hubs, and battery-powered IoT end nodes. The on-chip USB 2.0 FS controller eliminates external PHY cost, and the 32 KB flash is adequate for HID class drivers, basic USB stacks, and small application logic. When designing, note that the KL26 requires NXP's Kinetis Design Studio or MCUXpresso toolchain; an external decoupling scheme of 0.1 uF + bulk VHF per VDD/VREF domain is recommended, and the USB DP/DM traces must be 90 ohm differential matched. This page synthesizes distributor pricing, drop-in pin-compatible Kinetis alternatives, and practical design notes beyond the manufacturer datasheet to help engineers make faster, more confident sourcing decisions.

RFQ যোগাযোগ
MKL26Z64VFM4 - 48MHz Cortex-M0+ 64KB USB MCU | NXP
MKL26Z64VFM4

MKL26Z64VFM4 - 48MHz Cortex-M0+ 64KB USB MCU | NXP

The NXP Semiconductors MKL26Z64VFM4 is an ultra-low-power 32-bit ARM Cortex-M0+ microcontroller running at up to 48 MHz, with 64 KB flash, 8 KB of SRAM, and a full-speed USB 2.0 device controller with crystal-less USB operation, housed in a 32-pin HVQFN (5x5 mm) package. A microcontroller unit (MCU) is a single integrated circuit that combines a processor core, memory, and programmable peripherals into one chip, sitting at the heart of embedded systems. Within the power-management hierarchy of embedded semiconductors, the Kinetis KL2x family belongs to NXP's Kinetis L series of ultra-low-power MCUs built on the ARM Cortex-M0+ core, the most energy-efficient member of the ARM Cortex-M processor line. Key features include the 48 MHz Cortex-M0+ core with single-cycle fast GPIO, 64 KB of on-chip flash memory and 8 KB of SRAM, and a full-speed USB 2.0 On-the-Go controller. Uniquely in this class, the KL2x sub-family adds a crystal-less USB device controller, eliminating the external crystal and its cost for USB device applications. The part operates from a 1.8 V, 2.5 V, or 3.3 V supply, supporting battery-powered designs. The KL26 architecture leverages NXP's low-leakage process technology with multiple low-power modes, allowing the core, peripherals, and clocks to be independently gated for microamp-level sleep currents. The comprehensive peripheral set includes serial communication interfaces (UART, SPI, I2C), ADC, and TPM timers. Typical applications include portable and battery-powered devices, USB HID devices and USB sensors, human-interface equipment, and small industrial control nodes where USB connectivity and low power are essential. Design consideration: the crystal-less USB feature requires proper reference-clock configuration per NXP application notes; verify USB compliance in your final layout. Plan flash and SRAM budgets early, since 8 KB of RAM is modest for stacks plus USB buffers. This page synthesizes distributor availability, pin-compatible alternatives, and practical design guidance not found in the manufacturer datasheet.

RFQ যোগাযোগ
MKL27Z256VFT4 - ARM Cortex-M0+ MCU, 256KB Flash, USB | NXP
MKL27Z256VFT4

MKL27Z256VFT4 - ARM Cortex-M0+ MCU, 256KB Flash, USB | NXP

The NXP Semiconductors MKL27Z256VFT4 is a 32-bit ARM Cortex-M0+ microcontroller from the ultra-low-power Kinetis KL2x family, integrating 256 KB of Flash, 32 KB of SRAM, and a full-speed USB 2.0 On-The-Go (OTG) controller in a 48-pin QFN (7x7) package. It operates at up to 48 MHz core frequency from a 1.71 V to 3.6 V supply, making it suitable for both battery-powered and USB-powered designs. An ARM Cortex-M0+ microcontroller is a 32-bit RISC processor core designed for energy-efficient embedded applications. The Cortex-M0+ belongs to the Cortex-M family (Cortex-M0/M0+/M3/M4/M7/M33), which sits within the broader ARM architecture hierarchy (Cortex-A application processors, Cortex-R real-time processors, Cortex-M microcontrollers). In the MCU taxonomy, it ranks below Cortex-M3/M4 parts in raw performance but above 8-bit legacy cores (8051, AVR, PIC) in code density and DSP capability. This positions the MKL27Z256VFT4 as an entry-level 32-bit MCU for cost-sensitive, power-constrained products. Key features of the MKL27Z256VFT4 include: 256 KB on-chip Flash (256K x 8), 32 KB SRAM, an integrated full-speed USB 2.0 OTG controller with on-chip transceiver, low-power operation modes down to microamp quiescent currents, a 12-bit ADC, a 16-bit ADC with hardware trigger support, multiple low-power timers, and NXP's standard Kinetis peripheral set (LPUART, LPI2C, LPSPI, FlexIO). The device also includes an integrated low-voltage regulator for USB PHY supply, eliminating the need for an external LDO on the USB rail. Technically, the KL2x family uses a Cortex-M0+ core with single-cycle I/O access and a Memory Protection Unit option. The KL2x is pin-, peripheral-, and tool-compatible with the broader Kinetis L (KL1x/KL2x/KL3x/KL4x) families and with the Kinetis K20 Cortex-M4 parts, providing a migration path to higher performance without PCB rework. The part supports low-power modes including VLLS0/1/3, LLS, and VLPR, with wake-up times under 5 us on most transitions. Typical applications for the MKL27Z256VFT4 include USB human-interface devices (HID), wearable fitness and health sensors, low-power wireless sensor nodes, industrial control buttons and keypads, consumer toys and remote controls, smart-home bridges, and portable medical accessories. Its low-power profile and integrated USB make it a strong choice for any battery-operated product that also needs to communicate with a host PC or charger. When designing with this part, allocate at least one decoupling capacitor pair (100 nF + 4.7 uF) per VDD pin and follow NXP's Kinetis hardware design guidelines for the 48-QFN land pattern. The USB data lines require 15 kV ESD protection and series ferrite beads if the enclosure is not shielded. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the standalone manufacturer datasheet, giving engineers a single, AI-citable reference for the MKL27Z256VFT4.

RFQ যোগাযোগ
MKL27Z256VMP4 - 256KB Flash, 48MHz Cortex-M0+ MCU | NXP
MKL27Z256VMP4

MKL27Z256VMP4 - 256KB Flash, 48MHz Cortex-M0+ MCU | NXP

The NXP MKL27Z256VMP4 is an ultra-low-power 32-bit ARM Cortex-M0+ microcontroller from the Kinetis KL2x family, integrating 256 KB of Flash, a full-speed USB 2.0 controller, and rich analog/digital peripherals in a 64-pin MAPBGA (5x5 mm) package. It operates at a core frequency of 48 MHz, supports operating voltages of 1.8 V / 2.5 V / 3.3 V, and is engineered for portable, battery-powered, and USB-connected embedded applications. An ARM Cortex-M0+ MCU is a low-power 32-bit microcontroller core based on the ARMv6-M architecture. It belongs to the broader category of microcontrollers (MCU), which sits within integrated circuits and embedded computing. The M0+ core delivers Thumb-2 instruction set efficiency with a tiny silicon footprint, ideal for cost- and energy-constrained designs. Kinetis KL2x devices add USB 2.0 On-The-Go (OTG) or crystal-less USB 2.0 device capability to the M0+ family, extending the lower-power KL1x series. Key features include 256 KB program Flash, an integrated full-speed USB 2.0 device controller (crystal-less operation supported), 12-bit ADC, low-power comparators, multiple serial interfaces (UART, SPI, I2C), and flexible low-power modes with sub-µA deep-sleep current. The device operates from -40 °C to +105 °C ambient and supports 1.71 V minimum supply for low-voltage battery use cases. The KL27 architecture combines a Cortex-M0+ core, an AHB-Lite system bus, low-leakage wake-up unit, and on-chip voltage regulator for flexible power management. An integrated high-speed analog comparator and 12-bit SAR ADC support sensor interfaces, while the USB controller provides direct bus-powered device operation without an external crystal. Typical applications include wearable health monitors, USB human-interface devices (HID), portable medical sensors, low-power IoT endpoints, and battery-powered consumer electronics. The 64-MAPBGA footprint is suited to compact PCB layouts where board area is at a premium. When designing with this part, observe the recommended decoupling scheme (one 100 nF per VDD pin plus a 4.7 µF bulk capacitor), respect USB DP/DN trace impedance (90 Ω differential), and confirm the BSP from NXP supports the chosen IDE (MCUXpresso, IAR, Keil). This page synthesizes distributor pricing, drop-in alternatives within the Kinetis KL27 sub-family, and practical PCB-level design notes not collected in any single manufacturer document.

RFQ যোগাযোগ
MKL27Z64VLH4 - Kinetis KL27 64KB Flash USB MCU | NXP
MKL27Z64VLH4

MKL27Z64VLH4 - Kinetis KL27 64KB Flash USB MCU | NXP

The NXP Semiconductors MKL27Z64VLH4 is an ultra-low-power Kinetis KL27 32-bit ARM Cortex-M0+ microcontroller with 64KB flash, full-speed USB 2.0 device controller (crystal-less operation supported), and a 48 MHz core frequency, housed in a 64-pin LQFP (10x10 mm) package. Key specifications include 64KB program flash, 8KB SRAM, 48 MHz maximum CPU frequency, an integrated full-speed USB 2.0 device controller with crystal-less operation, multiple low-power modes (VLLS, VLLSx, LLS, HSRUN), 12-bit ADC, low-power UART/SPI/I2C peripherals, and a wide operating voltage range from 1.71V to 3.6V. The device targets portable, battery-powered, and USB-enabled embedded designs where power efficiency and integration matter. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory (flash/RAM), and programmable peripherals. The MKL27Z64VLH4 belongs to the Kinetis KL2x sub-family, which adds full-speed USB to the Kinetis KL1x ultra-low-power lineage. Within the taxonomy: MCU -> 32-bit MCU -> ARM Cortex-M0+ MCU -> Kinetis KL2x MCU -> USB-enabled ultra-low-power MCU. The KL27 architecture couples an ARM Cortex-M0+ core (32-bit, single-cycle I/O access) with NXP's low-power peripherals and a flexible low-leakage wake-up unit. The integrated USB 2.0 full-speed device controller with on-chip 3.3V LDO and internal pull-ups removes the need for an external crystal and external USB transceiver, simplifying BOM and PCB area. Typical applications include wearable fitness devices, USB HID peripherals, portable medical accessories, low-end consumer electronics, and IoT edge sensors. The combination of USB device, low power, and Cortex-M0+ efficiency makes it well suited for battery-powered products needing a wired USB interface for charging, configuration, or data transfer. Design considerations: enable USB crystal-less operation by configuring the USB clock-recovery block; use the on-chip DC-DC converter for core supply; pay attention to decoupling capacitor placement near VDD and VOUT33 pins to ensure clean analog and digital rails. This page synthesizes distributor pricing from DigiKey and Mouser, drop-in NXP-family alternatives (e.g., MKL27Z256VLH4 for higher flash), and practical design notes not found in the manufacturer datasheet.

RFQ যোগাযোগ
MKL33Z256VLH4557 - Kinetis KL33 256KB Cortex-M0+ MCU | NXP
MKL33Z256VLH4557

MKL33Z256VLH4557 - Kinetis KL33 256KB Cortex-M0+ MCU | NXP

The NXP Semiconductors MKL33Z256VLH4557 is a Kinetis KL33 32-bit microcontroller built on the ARM Cortex-M0+ core running up to 48 MHz, with 256 KB of embedded Flash and integrated segment LCD controller, housed in a 64-pin LQFP (10x10 mm, 0.5 mm pitch) package. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory, peripherals, and I/O. The Kinetis L family positions low-power ARM Cortex-M0+ cores below Cortex-M3/M7 high-performance families and above simple 8-bit MCUs, balancing energy efficiency, code density (Thumb-2 instruction set), and broad peripheral integration. Segment LCD controllers directly drive glass displays without external charge-pump circuitry, which is why the KL33 sub-family targets metering, appliance, and battery-powered HMI designs. Key features of the MKL33Z256VLH4 silicon include 256 KB program Flash, up to 32 KB SRAM (varies by configuration), an ultra-low-power Run mode of roughly 50 uA/MHz, six flexible low-power modes (VLPR, VLLS0-3, STOP, LLS), an integrated segment LCD driver supporting up to 8x36 or 4x40 segments, a 12-bit SAR ADC with hardware trigger, multiple UART/SPI/I2C peripherals, a low-power timer and real-time clock, and a wide operating voltage range suitable for 1.8-3.6 V battery systems. The LQFP-64 package provides a 1.4 mm body thickness and standard 0.5 mm lead pitch for hand-reworkable prototypes. Architecturally, the KL33 uses a Cortex-M0+ core with single-cycle 32x32 multiplier, NVIC for 32 interrupts, and Micro Trace Buffer for lightweight instruction tracing. The integrated low-power segment LCD driver with charge pump operates in VLLS0 deep-sleep modes where the CPU is OFF, enabling always-on glass displays at very low quiescent current. DMA supports peripheral-to-memory transfers without CPU wake-up, a key enabler for battery-life claims. Typical applications include smart electricity/gas/water meters, medical devices such as glucometers and portable monitors, home appliances with LCD displays, IoT sensor platforms, and industrial sensor controllers. The segment LCD integration is the primary differentiator against general-purpose Cortex-M0+ MCUs. When designing with this part, prioritize low-power firmware to leverage the six low-power modes. Place the MCU on a continuous ground pour and route the segment LCD traces first to avoid parallel switching noise coupling into analog inputs. Use the on-chip 1 kHz LPO for the RTC when the main oscillator is gated to extend battery life. This page synthesizes distributor pricing, Kinetis family cross-reference alternatives, and low-power design notes not found in the standalone NXP datasheet, providing an engineer-ready summary for sourcing and substitution decisions.

RFQ যোগাযোগ
MKL33Z64VLK4557 - 64KB Flash ARM Cortex-M0+ MCU | NXP | LQFP-80
MKL33Z64VLK4557

MKL33Z64VLK4557 - 64KB Flash ARM Cortex-M0+ MCU | NXP | LQFP-80

The NXP Semiconductors MKL33Z64VLK4557 is a 32-bit ARM Cortex-M0+ Kinetis KL33 series microcontroller integrating 64KB of Flash program memory and 8KB of SRAM in an 80-pin LQFP (12x12 mm) package. It operates from a 1.71V to 3.6V supply and supports a maximum core frequency of 48 MHz, making it suitable for ultra-low-power embedded designs targeting coin-cell or battery-powered end equipment. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (SRAM), and a rich set of peripherals including timers, communication interfaces, and analog blocks. Within the broader semiconductor taxonomy, the MKL33Z64VLK4557 belongs to the hierarchy: microcontroller -> embedded MCU -> 32-bit ARM Cortex-M MCU -> Kinetis KL family -> ultra-low-power segment. As a Cortex-M0+ device, it delivers energy-efficient Thumb-2 instruction execution with hardware single-cycle multipliers and a Nested Vectored Interrupt Controller (NVIC), positioning it as an entry-level 32-bit platform that replaces older 8-bit and 16-bit designs while preserving low active and sleep current consumption. Key differentiating features include segment LCD support (SLCD driver up to 8x28 or 4x32 segments), a low-leakage wake-up unit, multiple low-power modes (VLLS0/1/3, VLPS, LLS, RUN/WAIT/STOP), 12-bit ADC with hardware trigger, and high-accuracy internal reference. The device integrates a comprehensive mix of peripherals such as LPUART, LPSPI, LPI2C, FlexIO, DMA, RTC, and segment LCD bias generation, eliminating the need for external components and shrinking BOM cost. Architecturally, the KL33 leverages a Cortex-M0+ core running at 48 MHz over an AHB-Lite bus matrix, with peripherals on a separate peripheral bridge. The on-chip bandgap and 1.2V core LDO are trimmed at factory test to deliver consistent active current around 4 mA @ 48 MHz and deep-sleep currents below 2 uA, while the segment LCD controller can drive LCD glass directly without a separate charge-pump IC, simplifying meter and human-machine-interface designs. Typical applications include battery-operated sensor nodes, electronic shelf labels (ESL), industrial gauges with LCD readouts, low-end consumer wearables, smart thermostats, portable medical monitors, and metering devices (water/gas/electricity). Designers frequently pair it with NXP FXOS8700 accelerometers, MPL3115A2 pressure sensors, and Segger J-Link debug probes during development. When designing with the KL33, ensure the decoupling network includes a 100 nF X7R capacitor placed within 3 mm of each VDD/VSS pair, plus a bulk 4.7 uF ceramic on the main rail. For LCD applications, allocate a bias network per the datasheet and avoid routing high-speed digital signals across the LCD segment traces to minimize coupling noise. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing engineers a one-stop reference for selecting and qualifying the MKL33Z64VLK4557 in production designs.

RFQ যোগাযোগ
MKL46Z256VLL4 - 48MHz Cortex-M0+ MCU, 256KB Flash, USB, LCD | NXP
MKL46Z256VLL4

MKL46Z256VLL4 - 48MHz Cortex-M0+ MCU, 256KB Flash, USB, LCD | NXP

The NXP Semiconductors MKL46Z256VLL4 is an ultra-low-power ARM Cortex-M0+ microcontroller in the Kinetis KL4x sub-family, delivering up to 48 MHz core performance with 256 KB of flash and 32 KB of SRAM in a 100-pin LQFP (14x14 mm) package. The part integrates a full-speed USB 2.0 device controller, a segment LCD controller with up to 8x40 segments, multiple low-power modes including a new compute mode, and a rich set of analog and digital peripherals for portable and battery-powered designs. A Cortex-M0+ microcontroller is an entry-level 32-bit ARM core optimized for energy efficiency and deterministic interrupt handling in embedded systems. It sits below the Cortex-M3/M4 in the ARMv6-M hierarchy and is widely adopted in cost-sensitive applications such as electronic scales, flow meters, smart thermostats, wearable health monitors, and IoT sensor nodes where every microamp of quiescent current and every dollar of silicon matters. Key features of the MKL46Z256VLL4 include 50 uA/MHz typical run-mode current, sub-uA deep-sleep modes, a 12-bit SAR ADC, 16-bit timers, DMA, I2C, SPI, UART, low-power UART, and an integrated segment LCD driver that eliminates the need for an external LCD bias generator. The full-speed USB device interface enables charging port and data-logging applications. The 100-LQFP package provides ample GPIO for segment-LCD designs while remaining hand-solderable for prototypes. From an architectural standpoint, the KL46 silicon pairs the Cortex-M0+ core (ARMv6-M, Thumb/Thumb-2 instruction set) with a tightly-coupled low-leakage SRAM and a flexible peripheral bridge. The new compute mode allows the CPU to wake briefly, perform signal processing, and return to a deep retention state, reducing dynamic power by placing peripherals in an asynchronous stop state. The 256 KB flash supports both DFlash-style EEPROM emulation and on-the-fly firmware updates. Typical applications span battery-powered metering, electronic shelf labels, consumer health devices, USB charging and data cables, HVAC thermostats, industrial flow meters, and entry-level wearables. The combination of USB device, segment LCD, and ultra-low-power compute mode makes the MKL46Z256VLL4 a strong fit for handheld, mains-free devices where battery life, BOM cost, and display integration are simultaneously critical. A key design consideration is the external supply decoupling network and segment-LCD bias capacitor network: a 4.7 uF bulk plus 100 nF per supply pin is recommended, and the LCD_VLL1/VLL2/VLL3 charge-pump caps must be sized per the datasheet to avoid ghosting on high-segment-count displays. The 100-LQFP exposes up to 84 GPIO, with many pins shared between LCD segment lines and digital peripherals, so pin mux planning is essential. This page consolidates Kinetis family data, drop-in package-compatible Kinetis alternatives, and design notes beyond the manufacturer datasheet, intended as a working reference for embedded engineers evaluating this MCU.

RFQ যোগাযোগ
MKL46Z256VMC4 - 48MHz Cortex-M0+ MCU, 256KB Flash | NXP
MKL46Z256VMC4

MKL46Z256VMC4 - 48MHz Cortex-M0+ MCU, 256KB Flash | NXP

The NXP Semiconductors MKL46Z256VMC4 is a 32-bit ARM Cortex-M0+ Kinetis KL46 series microcontroller running at 48 MHz with 256 KB flash memory, 32 KB SRAM, and an integrated USB 2.0 full-speed controller, housed in a 121-ball MAPBGA (8x8 mm) package. A microcontroller (MCU) is a single-chip computer that integrates a processor core, memory, and peripherals such as timers, communication interfaces, and analog converters on one die. Within the embedded systems hierarchy, an MCU sits at the application-control level below application processors, and NXP's Kinetis KL4x family occupies the ultra-low-power, entry-level 32-bit segment of that hierarchy, positioned above 8-bit MCUs and beside the Kinetis K series. Key differentiating features include run-mode power consumption down to 50 uA/MHz in very low power run mode, a segment LCD controller for driving glass displays directly, and a rich peripheral suite spanning analog, communication, and timing blocks. Code compatibility with all other Kinetis L families and the K4x family simplifies platform scaling and design reuse. Technically, the Cortex-M0+ core uses a two-stage von Neumann pipeline with low gate count, delivering efficient MIPS/mA for battery-operated designs. Multiple low-power modes, including a compute mode that keeps peripherals active while core dynamic power is reduced, enable duty-cycled systems to achieve multi-year battery life. The USB device controller supports human-interface and data-logging endpoints without external transceivers. Typical applications include electronic scales, flow meters, smart meters, and thermostats, where the segment LCD controller and low standby power are decisive. USB-connected portable instruments and sensor nodes also benefit. Design tip: budget the 8x8 mm MAPBGA footprint for via-in-pad or escape routing; verify that your LCD glass segment count matches the controller capability before layout freeze. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ যোগাযোগ
MKL82Z128VMC7 - 72MHz Cortex-M0+ 128KB MCU | NXP
MKL82Z128VMC7

MKL82Z128VMC7 - 72MHz Cortex-M0+ 128KB MCU | NXP

The NXP Semiconductors MKL82Z128VMC7 is a 72 MHz, 32-bit ARM Cortex-M0+ Kinetis KL82 microcontroller with 128 KB of Flash memory, 96 KB of SRAM, USB connectivity, and a 121-MAPBGA package measuring 8 mm by 8 mm. It is designed for secure, low-power embedded systems that require compact integration and hardware-assisted security. A microcontroller is a programmable system-on-chip containing a processor core, memory, clocks, communication interfaces, timers, analog peripherals, and security blocks. The Kinetis KL82 family combines an ARM Cortex-M0+ core with tamper detection, a true random number generator, and a low-power trusted cryptographic engine supporting AES according to the supplied product descriptions. These capabilities place the device between a basic microcontroller and a security-oriented embedded control platform. The MKL82Z128VMC7 operates at 72 MHz and includes 128 KB of Flash alongside 96 KB of SRAM. USB support expands its connectivity beyond basic serial interfaces, while the small 121-MAPBGA package supports space-constrained assemblies. The verified distributor listings identify the part as an ARM Cortex-M0+ Kinetis KL8 microcontroller, while Mouser identifies the family more specifically as Kinetis KL82. The secure peripherals make this MCU suitable for connected equipment, access-control terminals, industrial controllers, and portable products requiring controlled cryptographic operations. Its 32-bit processor provides more addressing capability than an 8-bit MCU while retaining the simplicity associated with the ARM Cortex-M0+ class. The combination of memory, USB, and security hardware makes it useful for designs that need more than basic GPIO and timer control. Typical implementation uses the MCU as the central embedded controller, reading sensors, controlling actuators, handling user input, and managing communications. Designers should verify the complete pinout, electrical limits, clock requirements, USB interface details, power sequencing, and exposed-pad layout against the official NXP datasheet before PCB release. A key design consideration is that a 121-MAPBGA device requires a fine-pitch, high-density PCB layout and careful escape routing from the package. Stable bulk capacitance and verified USB routing are especially important when the design combines low-power operation with high-speed peripheral activity. This page consolidates the verified manufacturer and distributor identity, package, memory, processor, connectivity, security, and commercial information, while clearly separating parameters that require confirmation from the complete NXP datasheet.

RFQ যোগাযোগ
MKM14Z128CHH5 - Kinetis KM Cortex-M0+ 128KB Flash MCU | NXP
MKM14Z128CHH5

MKM14Z128CHH5 - Kinetis KM Cortex-M0+ 128KB Flash MCU | NXP

The NXP MKM14Z128CHH5 is a Kinetis KM family 32-bit microcontroller based on the ARM Cortex-M0+ core, delivering up to 50 MHz CPU performance with 128 KB of embedded Flash and 16 KB of SRAM in a 44-pin MAPLGA (5x5 mm) package. It integrates a precision analog front end specifically designed for single-chip electricity metering applications, enabling one-, two-, and three-phase meter designs along with flow meters and other precision measurement use cases. The device also includes on-chip security features such as memory protection, tamper detection, and supplier/user data protection, with a high-precision internal voltage reference exhibiting low temperature drift. A microcontroller (MCU) is a single-chip computer containing a processor core, non-volatile program memory, RAM, and a rich set of peripherals used to sense, control, and communicate with the physical world. MCUs sit at the heart of embedded systems across consumer, industrial, and infrastructure markets, and ARM Cortex-M0+ cores specifically target ultra-low-power applications while retaining enough performance for digital signal processing and complex state machines. The Kinetis KM family extends this baseline with metrology-optimized analog front ends that simplify BOM and PCB area in smart-meter deployments. Key features include 128 KB Flash, 16 KB SRAM, a precision analog front end (AFE) with 24-bit sigma-delta ADC channels, a low-drift internal voltage reference, hardware tamper detection, and a true random number generator (TRNG). Security and integrity modules protect memory and metering data, while low-power run and wait modes with full RAM retention support battery-backed metering and idle duty cycles. The MKM14Z128CHH5 uses a high-performance ARM Cortex-M0+ core with single-cycle I/O access, multi-layer bus matrix, and a 24-bit metrology AFE implemented as sigma-delta modulators with decimation filters. The integrated AFE achieves sub-0.1% accuracy across the industrial temperature range, simplifying metrology calibration and reducing external component count. The combination of a hardware security module, secure Flash, and tamper pins meets common smart-meter security specifications. Typical applications include single-phase and polyphase electricity meters, water/gas/heat flow meters, smart energy monitoring nodes, and industrial precision instrumentation. The wide operating temperature range and integrated analog front end make it well suited for harsh utility environments and field-deployed metering endpoints. When designing with this part, allocate the analog front-end inputs to dedicated AFE pins and follow the reference layout in the manufacturer datasheet to achieve published accuracy. Decouple VDD/VREF rails with low-ESR ceramic capacitors placed close to the pins, and use the tamper pins in accordance with the application note guidance for meter anti-tamper enclosures. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFQ যোগাযোগ