মাইক্রোকন্ট্রোলার

পণ্য (20,000+)

MPC8535EAVTATH - PowerPC e500 MPU 1.25GHz 783-FCPBGA | NXP
MPC8535EAVTATH

MPC8535EAVTATH - PowerPC e500 MPU 1.25GHz 783-FCPBGA | NXP

The NXP (formerly Freescale) MPC8535EAVTATH is a PowerPC e500 microprocessor IC from the MPC85xx PowerQUICC III family featuring a single 32-bit core running at 1.25 GHz in a 783-pin FCPBGA (29x29) package. It integrates the e500 system-on-chip architecture with hardware cryptography acceleration, DDR memory controller, and high-speed serial interfaces for embedded networking applications. The device operates from multi-rail voltages of 1.0V (core), 1.5V, 1.8V, 2.5V, and 3.3V (I/O) to support mixed-voltage system designs. An MPU (microprocessor unit) is the central processing element of an embedded system, integrating CPU core, caches, memory controllers, and I/O peripherals on a single die. Within the broader taxonomy, an MPU sits above microcontroller units (MCUs) in processing capability but below application processors in computational throughput; the MPC85xx family specifically targets networking and communications infrastructure, bridging routers, base-station controllers, and industrial control. PowerQUICC III architecture integrates communications peripherals alongside the e500 core, reducing system BOM while delivering deterministic performance for packet processing. Key features of the MPC8535EAVTATH include the e500 core with dual-issue pipeline, integrated L1/L2 cache hierarchy, four SerDes lanes for Gigabit Ethernet or PCI Express connectivity, DDR/DDR2 memory controller, and dedicated security engine for IPsec, SSL/TLS, and bulk-data encryption. The 783-pin FCPBGA package uses a 29 mm x 29 mm body with 1 mm pitch and provides thermal dissipation through the die-attached heat spreader. The device supports industrial temperature grades and extended product longevity programs typical of NXP communications processors. The MPC85xx silicon integrates a programmable QUICC Engine subsystem for legacy communications protocols, dual Gigabit Ethernet controllers with TCP/IP acceleration offload, and a local bus controller supporting NAND flash, NOR flash, and SRAM memories. The e500 core includes a Book-E implementation with MMU and floating-point unit optional on select variants. Security engines accelerate AES, DES/3DES, SHA-1/SHA-256, and public-key algorithms, enabling hardware VPN termination at line rate. Typical applications include industrial routers, telecom gateways, factory automation controllers, network-attached storage platforms, and secure VPN appliances. The device's combination of high-frequency e500 core, multi-protocol QUICC Engine, and integrated security acceleration makes it well-suited for embedded designs requiring deterministic networking throughput combined with hardware cryptographic offload. Designers should consider the substantial 783-ball BGA footprint during PCB layout: minimum 8-layer stack-up with dedicated power planes is recommended to maintain signal integrity across high-speed DDR memory and SerDes interfaces. Thermal management requires an exposed heat spreader or top-side heatsink to maintain junction temperatures below the 105C specification under continuous load. This page synthesizes distributor pricing, drop-in alternative analysis, and practical design notes not consolidated on the manufacturer datasheet cover page, helping engineers evaluate the MPC8535EAVTATH for both new designs and legacy system refresh.

RFQ যোগাযোগ
MPC8535EBVTAKGA - PowerPC e500 MPU 600MHz 783-FCPBGA | NXP
MPC8535EBVTAKGA

MPC8535EBVTAKGA - PowerPC e500 MPU 600MHz 783-FCPBGA | NXP

The NXP Semiconductors MPC8535EBVTAKGA is a PowerPC e500 microprocessor IC from the MPC85xx family delivering 1-core 32-bit processing at 600 MHz in a 783-pin FCPBGA (29x29) package. The device integrates an e500 core with security/encryption features (the "EB" suffix per NXP ordering scheme) and is intended for embedded networking and industrial control applications requiring deterministic PowerPC performance. A microprocessor (MPU) is the central processing unit of an embedded system, executing operating systems and application software while interfacing with external memory and peripherals. The MPC85xx family sits within NXP's Power Architecture embedded processor portfolio, a hierarchy that spans PowerPC -> Power Architecture -> embedded microprocessor -> system-on-chip-class CPU. These devices typically integrate memory controllers, local bus interfaces, and security accelerators, reducing external component count in routers, switches, and industrial gateways. Key features of the MPC8535EBVTAKGA include a 32-bit PowerPC e500 core running at 600 MHz, integrated security acceleration logic, on-chip L1/L2 cache, and a high-bandwidth system bus for memory and I/O. The 783-FCPBGA (29 mm x 29 mm) package supports the high I/O count demanded by dual Gigabit Ethernet controllers, DDR memory interface, PCI Express, and local bus interfaces present in the family. The MPC8535 architecture pairs the e500 core with a dedicated system interface unit, allowing the processor to issue memory transactions in parallel with DMA operations. This parallelism is critical for networking line cards where sustained packet throughput must coexist with control-plane software execution. The "EB" designator indicates the encryption-enabled security engine, used for IPsec, SSL, and other cryptographic workloads. Typical applications include wired and wireless edge routers, industrial Ethernet gateways, networked storage controllers, and defense/aerospace secure processing platforms. Designers select this part when PowerPC software compatibility is required and integrated security is desired without external crypto coprocessors. When designing with the MPC8535EBVTAKGA, allocate at least four PCB layers with a solid ground plane beneath the BGA to manage the 600 MHz switching currents. Decouple each power domain with bulk, mid-range, and high-frequency ceramic capacitors placed as close as possible to the package vias. This page synthesizes distributor pricing, drop-in alternatives, package geometry, and practical design notes not duplicated on distributor product pages, giving engineers a single reference for evaluation, sourcing, and PCB-level integration.

RFQ যোগাযোগ
MPC8535EBVTANGA - PowerQUICC III 800MHz SoC | NXP Semiconductors
MPC8535EBVTANGA

MPC8535EBVTANGA - PowerQUICC III 800MHz SoC | NXP Semiconductors

The NXP Semiconductors (formerly Freescale) MPC8535EBVTANGA is a PowerQUICC III integrated communications processor that combines an 800 MHz PowerPC e500 core with high-speed peripheral integration on a single device, packaged in a 783-ball FC-PBGA at 29x29 mm. The MPC8535E is designed to deliver gigahertz-class complex application processing performance with exceptional feature integration and high-speed connectivity for IP network and advanced embedded systems. Built on a 32-bit Power Architecture, it includes 256 KB of L2 cache and integrates security acceleration, dual GbE controllers, and multiple high-speed serial interfaces for system-on-chip designs. This product is a microprocessor in the broader taxonomy of microprocessors -> microcontrollers and processors -> integrated circuits -> semiconductors. The MPC8535E PowerQUICC III family targets networking infrastructure and industrial control applications where deterministic processing, integrated peripherals, and security offload reduce bill-of-materials cost and PCB complexity. As an SoC, it eliminates the need for separate companion bridge chips in many designs. Key features include an 800 MHz PowerPC e500 core with dual-issue pipeline, integrated DDR2/DDR3 memory controller with ECC, dual 10/100/1000 Ethernet MACs, four PCI Express lanes, two SATA ports, USB 2.0, SDHC, local bus, and security engines supporting DES, 3DES, AES, RSA, and SHA. The integrated SEC (Security Engine) accelerates bulk encryption and public-key operations, offloading the CPU for wire-speed throughput. The device supports an extended operating temperature range of 0C to 105C. Architecture-wise, the MPC8535E uses a hierarchical bus structure with the e500 core connected through a CoreNet coherency fabric to the L2 cache and peripheral controllers. The DDR memory controller supports both DDR2 and DDR3 SDRAM with ECC for high-reliability applications. The integrated peripherals are accessed via the same coherency fabric, minimizing latency. Typical applications include enterprise routers, Ethernet switches, network attached storage (NAS), IP PBX systems, industrial automation controllers, secure gateways, and single-board computers in networking equipment. The combination of processing power, peripheral integration, and security offload makes the MPC8535E well suited for line-card processors in routers and switches where deterministic throughput is critical. When designing with this device, allocate adequate PCB area for thermal dissipation and signal routing of the 783-ball PBGA. The extended operating temperature of 0C to 105C supports industrial deployments. Use the NXP CodeWarrior development tools and reference BSPs from NXP for rapid prototyping. This page synthesizes distributor pricing, parameter data from the manufacturer datasheet, and engineering guidance not found in the standard product listings.

RFQ যোগাযোগ
MPC8535EBVTANGA557 - PowerQUICC III 800MHz SoC | NXP | FCPBGA-783
MPC8535EBVTANGA557

MPC8535EBVTANGA557 - PowerQUICC III 800MHz SoC | NXP | FCPBGA-783

The NXP MPC8535EBVTANGA557 is a PowerQUICC III integrated communications processor built around a PowerPC e500 core running at 800 MHz, housed in a 783-ball FCPBGA (29x29 mm) package. It integrates high-speed connectivity including DDR2/DDR3 memory controllers, SDHC, PCI/PCIe, SATA, and Gigabit Ethernet alongside an SEC crypto engine, targeting IP network, storage, and advanced media processing applications. What is a PowerQUICC III communications SoC? PowerQUICC III is NXP/Freescale's third-generation Power Architecture-based system-on-chip family for embedded networking and telecommunications. It integrates a PowerPC processor core with memory controllers, high-speed serial interfaces, security engines, and packet-processing acceleration logic on a single die. Within the broader taxonomy it sits at the intersection of microprocessors, network processors, and SoCs, and is a member of the power management and high-performance embedded category. Key features include a 32-bit PowerPC e500 core at 800 MHz with up to 1 GHz capability in the family, hardware-accelerated SEC security processing, dual Gigabit Ethernet MACs, integrated SATA 1.5/3.0 Gb/s ports, PCI Express and PCI interfaces, DDR2/DDR3 memory controller with ECC support, SDHC interface, and a flexible local bus controller. These integration points reduce the need for companion chips in router, gateway, and NAS designs. Architecturally the MPC8535E pairs the e500 core with a high-bandwidth system bus and dedicated DMA engines, allowing the SEC, Ethernet, and SATA blocks to move data without heavy CPU intervention. Compared to discrete MCU-plus-discrete-controller solutions, this tight integration lowers BOM count and improves determinism for packet workloads. Typical applications include wired and wireless routers, network attached storage (NAS), industrial gateways, secure VPN appliances, and advanced media processing platforms. The SEC engine also makes it suitable for IPsec/SSL acceleration in next-generation firewalls. When designing with this part, verify that the 783-ball FCPBGA layout has adequate PCB escape routing for DDR3 and SERDES lanes, since signal integrity and stack-up cost dominate the design. Thermal management is critical: at 800 MHz under sustained load, plan for airflow or heatsinking per the device's thermal profile. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a single reference point for evaluating the MPC8535EBVTANGA557.

RFQ যোগাযোগ
MPC8535EBVTAQG - PowerQUICC III 1.0GHz e500 MPU | Freescale/NXP
MPC8535EBVTAQG

MPC8535EBVTAQG - PowerQUICC III 1.0GHz e500 MPU | Freescale/NXP

The Freescale/NXP MPC8535EBVTAQG is a high-performance PowerQUICC III integrated processor featuring a 32-bit Power Architecture e500 core scaling up to 1.0 GHz (with the family rated up to 1.25 GHz), housed in a 783-ball FCPBGA (29x29 mm) package. It implements Power Architecture technology with a 36-bit physical address space, and is targeted at industrial-grade networking and embedded control applications. A microprocessor (MPU) is the central processing unit of an embedded system that fetches, decodes, and executes instructions while managing memory and peripherals. The MPC8535EBVTAQG belongs to the PowerQUICC III family of communications processors, which sit in the hierarchy: MPU -> microprocessor -> integrated processor -> Power Architecture -> PowerPC -> communications processor. PowerQUICC III parts integrate CPU cores, memory controllers, and communications peripherals on a single die, enabling high-throughput packet processing for routers, switches, and industrial gateways. Key features of the MPC8535EBVTAQG include a 1.0 GHz e500 core, integrated DDR memory controller, dual GbE controllers, PCI Express and RapidIO interconnect support, and a high-bandwidth local bus. Industrial-grade temperature qualification supports deployment in factory automation, telecom edge equipment, and harsh-environment networking appliances where commercial parts would fail. The device uses a system-on-chip architecture combining a PowerPC-class CPU with hardware acceleration blocks for queue management, table lookup, and cryptography offload. This integration reduces BOM count versus discrete CPU-plus-ASIC designs and simplifies PCB layout, although the 783-ball BGA footprint demands multilayer PCB fabrication with controlled-impedance routing for the DDR and SerDes lanes. Typical applications include industrial Ethernet switches, routers and network appliances, telecom base station controllers, factory automation controllers, and secure gateways. The 1.0 GHz core delivers deterministic throughput for layer-2/layer-3 packet forwarding while the integrated peripherals eliminate external PHY and bridge chips. When designing with this processor, allocate at least 6 PCB layers with dedicated power and ground planes; the 783-ball BGA requires 0.8 mm pitch fanout with microvia or via-in-pad technology. Decouple each voltage rail with bulk, mid-frequency, and high-frequency ceramic capacitors placed as close to the balls as the BGA land pattern allows. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, helping procurement and hardware teams evaluate the part against current PowerQUICC III family members and successor Layerscape devices.

RFQ যোগাযোগ
MPC8535EBVTATHA - PowerPC e500 MPU 1.25GHz 783-FCPBGA | NXP
MPC8535EBVTATHA

MPC8535EBVTATHA - PowerPC e500 MPU 1.25GHz 783-FCPBGA | NXP

The NXP MPC8535EBVTATHA is a PowerPC e500-based integrated microprocessor from the MPC85xx family, featuring a single 32-bit core operating at up to 1.25 GHz, housed in a 783-ball FCBGA (Flip-Chip Plastic Ball Grid Array) package measuring 29 mm x 29 mm. The part integrates a security co-processor (SEC) for cryptographic acceleration and a DDR2/DDR3 memory controller, making it a complete system-on-chip for wired networking and embedded computing workloads. What is a PowerPC e500 MPU? The PowerPC e500 architecture is a 32-bit superscalar embedded processor core originally developed by Freescale (now part of NXP Semiconductors) targeting networking, storage, industrial control, and telecom infrastructure. Within the broader taxonomy, the MPC8535 sits as an MPU (microprocessor unit) -> embedded processor -> microprocessor -> integrated circuit. The e500 core typically pairs with integrated peripherals (memory controllers, security engines, Ethernet MACs) so a single chip can replace what previously required a CPU plus discrete glue logic on the PCB. Key features of this variant include hardware-accelerated cryptography (SEC), a 64-bit DDR2/DDR3 memory controller with ECC support, integrated Ethernet interfaces, and PCI Express connectivity. Operating temperature and qualification tier are encoded in the part suffix: T indicates -40C to +105C extended industrial temperature, A indicates the silicon revision A, and TH indicates the specific operating-condition/customer profile. The FCBGA-783 package with 29 mm x 29 mm body requires a high-density multi-layer PCB with controlled-impedance routing, matched-length serpentine traces for DDR lines, and via-in-pad or microvia assembly technology. Architecturally, the MPC8535EBVTATHA pairs the e500 core with a high-bandwidth system bus that fans out to the DDR memory controller, the SEC engine, and the I/O subsystem (Ethernet, PCIe, local bus). The 1.25 GHz clock speed in this variant is the top end of the MPC8535 speed grade range, delivering roughly 1700 DMIPS of integer performance. The hardware SEC engine accelerates AES, 3DES, SHA, and public-key operations used in IPsec, SSL/TLS, and DRM pipelines, offloading these tasks from the main CPU. Typical applications include industrial routers and gateways, network attached storage (NAS) controllers, secure access points, industrial control boards, and OEM embedded modules. The wide operating temperature range and integrated security engine make the part especially well-suited to industrial networking and headless-edge appliances that must run unattended for years. When designing with this device, engineers must follow NXP's reference PCB layout for the FCBGA-783 - signal integrity on the DDR2/DDR3 interface and thermal dissipation through the package's die-side thermal interface are both critical. Boot configuration, clock routing, and power-up sequencing are governed by NXP documentation. Limited availability on the open market (the part is in lifecycle transition and stocked mostly through distributors like Rochester Electronics for legacy builds) should also be considered during component selection. This page synthesizes verified distributor data, package-level cross-references, and design notes not consolidated on a single manufacturer page.

RFQ যোগাযোগ
MPC8535ECVJAKGA - PowerQUICC III MPU 600MHz 783-FCBGA | NXP
MPC8535ECVJAKGA

MPC8535ECVJAKGA - PowerQUICC III MPU 600MHz 783-FCBGA | NXP

The NXP (formerly Freescale) MPC8535ECVJAKGA is a PowerQUICC III integrated communications processor built on the Power Architecture e500 core, delivering 600 MHz of processing performance within a 783-ball FCBGA (29x29 mm) package designed for industrial temperature ranges (-40C to +105C). It integrates a single 32-bit e500 core with DDR2/DDR3 memory controller, high-speed serial interfaces including PCI Express and SATA, plus Gigabit Ethernet, USB, SDHC, and the Security Engine (SEC) for cryptographic acceleration, making it a true system-on-chip for embedded networking. What is a PowerQUICC processor? A PowerQUICC (pronounced 'power-quick') is a family of communications processors from NXP (originally Freescale, originally Motorola) that integrates one or more Power Architecture CPU cores with a high-bandwidth Communications Processor Module (CPM) or QUICC Engine. The family spans PowerQUICC I, II, and III generations and sits in the broader taxonomy: PowerQUICC -> communications processor -> application processor -> microprocessor -> integrated circuit -> semiconductor. PowerQUICC III parts specifically target enterprise routers, switches, wireless base stations, and industrial control requiring deterministic multi-protocol I/O. The MPC8535E's headline features include a 32-bit e500 core running at 600 MHz, hardware-accelerated Security Engine (SEC 3.0) supporting DES/3DES/AES/SHA, two PCI Express interfaces, two Gigabit Ethernet controllers, two SATA-II ports, a USB 2.0 controller, an enhanced SDHC host, and 256 KB of internal SRAM with L1/L2 cache hierarchy. The integrated DDR2/DDR3 SDRAM controller supports up to 512 MB of addressable memory with ECC, while DUART, I2C, SPI, and local bus glue logic round out the peripheral set for legacy MCU-style connectivity. Architecturally, the MPC8535E uses a Harvard-style e500 core with separate 32 KB L1 instruction and data caches plus a unified 256 KB L2 backside cache. The device implements NXP's Trust Architecture with secure boot and the SEC block offloading symmetric/asymmetric crypto from the CPU. On-chip serdes macros deliver multi-gigabit connectivity without external PHYs, which historically reduced board cost in router line cards and RAID controllers. Typical applications include enterprise routers and switches, RAID storage controllers, industrial automation controllers, secure access points, factory automation PLCs, and military/aerospace embedded systems. The wide peripheral integration and -40C to +105C industrial temperature grade target designs requiring both rich I/O and harsh-environment reliability. When designing with this device, evaluate whether the 600 MHz e500 throughput is sufficient for your control plane, confirm DDR3 routing supports fly-by topology for 783-ball flip-chip BGA assembly, and budget for the 783-ball FCBGA requiring multi-layer PCB with microvia stack-ups. Per the NXP product page, this part has reached End of Life status, so redesigns should verify remaining inventory and consider the newer QorIQ P-series family for fresh designs. This page consolidates authorized distributor pricing, parametric specifications, package details, and engineering guidance beyond the raw datasheet to help procurement and design engineers evaluate the MPC8535ECVJAKGA for both legacy maintenance and new embedded designs.

RFQ যোগাযোগ
MPC8535ECVTAKGA - PowerQUICC III MPU, 600MHz, 783-FCBGA | NXP
MPC8535ECVTAKGA

MPC8535ECVTAKGA - PowerQUICC III MPU, 600MHz, 783-FCBGA | NXP

The NXP MPC8535ECVTAKGA is a PowerQUICC III integrated communications processor built around the PowerPC e500 core, delivering up to 600 MHz of complex application processing performance in a 783-ball FCBGA (29x29 mm) package. It integrates a high-speed system-on-chip with DDR2/DDR3 memory controllers, SDHC, PCI/PCIe, SATA, Gigabit Ethernet MACs and a Security Engine (SEC), targeting IP networking, storage and industrial gateway designs with extended -40C to +105C temperature support. PowerQUICC III is the third-generation Power Architecture communications processor family from NXP (formerly Freescale), succeeding PowerQUICC II and combining a high-performance e500 core with on-chip peripherals formerly found in external ASICs. Within the broader system hierarchy it sits between a generic microprocessor (MPU) and a fully integrated network processor, integrating the CPU core, memory controller, DMA engines, security accelerator and multi-protocol peripherals on a single die for deterministic, low-latency packet handling. Key features include a 32-bit PowerPC e500 core with up to 600 MHz core frequency, an integrated SEC security engine for IPSec, SSL/TLS and bulk encryption, dual Gigabit Ethernet controllers with TCP/IP acceleration, four SerDes lanes configurable for PCI/PCIe and SATA, an enhanced local bus controller, dual I2C, DUART, GPIO and DDR2/DDR3 SDRAM controller with ECC. The 783-FCBGA package provides ample thermal headroom for industrial-temperature operation and exposes all high-speed interfaces without external glue logic. Typical applications include industrial routers and gateways, secure VPN concentrators, networked storage controllers (NAS/iSCSI), factory-floor control and edge compute platforms, and aerospace/defense communications where the -40C to +105C temperature range and SEC engine are required. The integrated DDR2/3 controller with ECC further supports designs that need error-corrected memory for high-availability systems. When designing with the MPC8535ECVTAKGA, plan a 6-layer PCB at minimum for DDR3 signal integrity, provide a dedicated 1.0V core supply with tight load-line regulation, and follow NXP hardware specifications document for SerDes reference clock jitter. Bypass capacitors must be placed as close as possible to each supply pin, and unused balls must remain connected per the package layout guide to avoid signal coupling. This page synthesizes distributor availability, drop-in alternatives drawn from the PowerQUICC III family, and practical hardware-design considerations not consolidated in the original datasheet.

RFQ যোগাযোগ
MPC8535ECVTAKGA557 - 600MHz PowerQUICC III e500 MPU | NXP
MPC8535ECVTAKGA557

MPC8535ECVTAKGA557 - 600MHz PowerQUICC III e500 MPU | NXP

The NXP Semiconductors MPC8535ECVTAKGA557 is a PowerPC e500 microprocessor in NXP's PowerQUICC III family, delivering a single 32-bit core at 600MHz in a 783-ball FC-PBGA (29x29 mm) package. Part number decoding indicates the 1V core voltage tier (V suffix), commercial temperature grade (T), and the “A557” customer-specific order code supplied by Rochester Electronics. A microprocessor (MPU) is a single-chip CPU with on-chip caches, memory management, and peripheral controllers, sitting at the top of a typical embedded hierarchy (MPU -> SoC -> integrated circuit -> semiconductor). The MPC85xx family integrates communications peripherals alongside the e500 core, allowing wired networking, storage, and industrial control firmware to run on one chip without an external controller ASIC. Key features include the 600MHz e500 core with double-precision FPU, integrated L1/L2 caches, an enhanced local bus controller, DDR memory controller, multiple Gigabit Ethernet MACs, and PCI/PCI-X interfaces. The 1V core rail keeps active power modest for its performance tier, while the FC-PBGA package supplies the ball density required for the wide external memory and I/O buses. The MPC8535E uses a Book E/embedded PowerPC architecture with hardware table-walk MMU and tightly coupled SRAM, supporting deterministic interrupt latency for real-time protocol stacks. Integrated security and SEC engines (where enabled by device derivative) provide protocol offload for IPsec, SSL/TLS, and IPSec-accelerated VPN gateways, which historically drove the part's adoption in mid-range routers and security appliances. Typical applications include industrial networking routers, network attached storage controllers, telecom line cards, and embedded control planes. The 29x29 mm FC-PBGA requires a multilayer PCB with controlled-impedance routing for DDR and SerDes lanes. When designing the power tree, allocate at least 2A peak headroom on the 1V core rail to absorb e500 core activity bursts. Place a minimum 22uF bulk + 0.1uF high-frequency decoupling distribution across the BGA balls, and follow NXP layout guidelines for DDR termination to avoid signal-integrity re-spins. This page consolidates distributor inventory, datasheet references, same-family order codes, and engineering trade-offs that the bare manufacturer datasheet does not summarize.

RFQ যোগাযোগ
MPC8536AVJATHA - 1.25GHz PowerPC e500 SoC | NXP | Networking
MPC8536AVJATHA

MPC8536AVJATHA - 1.25GHz PowerPC e500 SoC | NXP | Networking

The NXP MPC8536AVJATHA is a 1.25 GHz PowerQUICC III system-on-chip (SoC) microprocessor built around a single 32-bit PowerPC e500 core, housed in a 783-ball FCPBGA (29x29 mm) package and rated for 0 to 90 degrees C operation. A system-on-chip for embedded networking integrates a processor core, memory controllers, and high-speed I/O onto one die, replacing multi-chip solutions and reducing board complexity. Within the power-management and embedded-processing hierarchy, the MPC85xx PowerQUICC III family sits above smaller PowerQUICC II devices and targets gigahertz-class application processing with balanced I/O throughput for IP networking and advanced media processing. Key features include dual 10/100/1000 Mbps Ethernet controllers, dual SATA 3Gbps interfaces, and triple USB 2.0 ports, providing native connectivity for storage gateways and network appliances. The integrated DDR2 and DDR3 memory controllers support high-bandwidth main memory without external bridge chips. PCI and PCI Express interfaces enable flexible expansion, while DUART, I2C, SPI, and MMC/SD (SDHC) peripherals cover control and storage needs. Technically, the e500 core combines a RISC execution pipeline with NXP enhanced peripherals and interconnect technology, balancing core performance against I/O system throughput. Multiple supply rails (1.5V, 1.8V, 2.5V, and 3.3V per distributor data) support core, I/O, and interface domains, requiring sequenced power-up design. The 783-ball FCPBGA 29x29 mm outline demands a multilayer PCB with controlled-impedance high-speed routing for DDR3, PCIe, and SerDes signals. Typical applications include IP network routers and switches, storage controllers using the dual SATA and Gigabit Ethernet interfaces, industrial control systems, and media processing equipment where gigahertz-class processing is required. A critical design consideration is thermal management: a 1.25 GHz PowerPC e500 dissipates substantial power, so a properly sized heatsink and airflow must be validated against the datasheet thermal resistance figures before finalizing the enclosure. This page synthesizes distributor pricing, drop-in alternatives, lifecycle status, and practical design notes not found in the manufacturer datasheet, helping engineers secure last-time-buy stock for this End-of-Life part.

RFQ যোগাযোগ
MPC8536AVTAKGA - PowerQUICC III 600MHz SoC | NXP | Networking
MPC8536AVTAKGA

MPC8536AVTAKGA - PowerQUICC III 600MHz SoC | NXP | Networking

The NXP (formerly Freescale) MPC8536AVTAKGA is a PowerQUICC III integrated communications processor that combines a 32-bit Power Architecture e500 core running at 600 MHz with high-speed peripherals for IP networking and advanced media processing. Housed in a 783-ball FCPBGA (29x29 mm) package, the device integrates DDR2/DDR3 memory controllers, SDHC, PCI/PCIe, SATA, dual Gigabit Ethernet, and USB interfaces on a single die. A PowerQUICC (pronounced "power-quick") processor is a family of communications-centric SoCs that originated at Motorola/Freescale and continued under NXP. The PowerQUICC architecture targets embedded networking equipment where deterministic I/O, multi-protocol support, and robust peripheral integration outweigh raw GHz performance. Within the broader taxonomy, MPC8536 sits in the PowerQUICC III family of integrated communications processors -> Power Architecture SoCs -> embedded processors -> microprocessors -> semiconductors. Key features include the e500 core with dual-issue superscalar pipeline, integrated L1/L2 caches, a system-on-chip DDR2/DDR3 SDRAM controller with ECC, two Gigabit Ethernet MACs with SGMII support, two PCI Express interfaces, one PCI interface, two SATA ports, USB 2.0, SDHC, and a security engine. The integrated peripherals allow a single MPC8536 to replace a CPU-plus-discrete-controller board, reducing BOM count in routers, switches, and network attached storage. The architecture employs a coherent system bus connecting the e500 core to the memory controller and high-speed I/O. Hardware acceleration for protocol processing offloads packet handling from the core, enabling sustained line-rate throughput on GbE ports without CPU saturation. The 0 to 90 C operating range supports thermally constrained embedded environments without industrial-grade silicon. Typical applications include enterprise routers, SOHO/SMB switches, network attached storage (NAS), industrial gateways, and IP set-top boxes. The combination of GbE plus PCIe plus SATA makes the part well suited to consolidated headless NAS controllers where DDR3 memory bandwidth and dual GbE aggregation are required. When designing with this device, allocate the largest available PCB area to the 783-ball FCPBGA breakout, route DDR3 signals with matched lengths, and verify that the heatsink thermal design keeps junction temperature below 90 C at maximum sustained load. The part is now in NXP's obsolescence roadmap for the PowerQUICC III line - check the NXP product change notification before committing to new designs.

RFQ যোগাযোগ
MPC8536AVTANG - PowerPC e500 MPU 800MHz 783-FCBGA | NXP
MPC8536AVTANG

MPC8536AVTANG - PowerPC e500 MPU 800MHz 783-FCBGA | NXP

The NXP MPC8536AVTANG is a PowerPC e500 microprocessor from the PowerQUICC III MPC85xx family, delivering 800 MHz of single-core 32-bit processing performance in a 783-pin FCBGA (29x29 mm) package. Fabricated on a 0.09 µm process, the device operates from multi-rail supplies of 1.0 V (core), 1.5 V, 1.8 V, 2.5 V, and 3.3 V for I/O and DDR2 memory interfaces. The integrated communications processor combines high-performance computing with on-chip peripherals for storage, networking, and industrial control. A PowerQUICC III MPU belongs to the microprocessor (MPU) category within the broader Integrated Circuits > Microcontrollers/MPU taxonomy. PowerQUICC III devices integrate one or more PowerPC e500 cores with peripheral controllers (Ethernet, DMA, I2C, SPI, UART, PCI Express, security engines), enabling them to replace discrete CPU-plus-ASIC designs in routing, switching, and embedded gateway applications. The MPC8536AVTANG features a 32-bit PowerPC e500 core with a 32 KB instruction and 32 KB data L1 cache, a 256 KB L2 cache, hardware MMU, and an integrated DDR2 memory controller. It also includes two 10/100/1000 Mbps Ethernet MACs, four 10/100 Mbps Ethernet MACs, USB 2.0, PCI Express, and optional security acceleration. Energy management features such as doze, nap, sleep, and deep-sleep modes reduce power in idle periods. The architecture combines a superscalar e500 execution pipeline with on-chip SRAM and a high-bandwidth system bus, allowing deterministic response in real-time communications workloads. The 783-FCBGA package exposes wide parallel DDR2, local-bus, and serial RapidIO interfaces, supporting line-rate packet processing in enterprise and service-provider equipment. Typical applications include enterprise routers and switches, network security appliances, industrial control gateways, storage controllers, and SOHO/SMB routing platforms. The integrated Ethernet and security blocks make it a strong fit for VPN/firewall appliances and converged IP service gateways. When designing with this MPU, allocate dedicated ground/power planes on the PCB for the 1.0 V core supply, follow the NXP hardware specifications for DDR2 routing (length-matched, impedance-controlled traces), and provide a heatsink or thermal interface material since a single 1 GHz class PowerPC part typically dissipates 5-10 W at full utilization. This page synthesizes distributor pricing, drop-in alternatives, application notes, and practical design considerations not collected in a single place on the manufacturer datasheet, giving procurement, hardware, and firmware teams a faster path to a Bill of Materials decision.

RFQ যোগাযোগ
MPC8536AVTAQG - PowerPC e500 MPU 1GHz 783-FCPBGA | NXP
MPC8536AVTAQG

MPC8536AVTAQG - PowerPC e500 MPU 1GHz 783-FCPBGA | NXP

The NXP MPC8536AVTAQG is a PowerPC e500 microprocessor in the MPC85xx PowerQUICC III family, integrating a single 32-bit core running at 1.0 GHz in a 783-ball FCBGA (29x29 mm) package. The device features dedicated hardware accelerators for datapath-intensive packet processing tasks, dual Gigabit Ethernet controllers with SGMII support, and a high-bandwidth DDR2/DDR3 memory controller with ECC, making it a System-on-Chip solution for networking and embedded infrastructure equipment. An MPU (Microprocessor Unit) with integrated peripherals is a category of processor that combines CPU cores, memory controllers, and I/O subsystems onto a single die. The MPC8536 belongs to the broader hierarchy of microprocessor -> embedded processor -> networking SoC -> communications infrastructure IC. By integrating the datapath acceleration engine and security engine alongside the e500 core, the MPC8536 reduces component count versus discrete CPU-plus-coprocessor designs, simplifying board layout and lowering BOM cost for OEM manufacturers. Key features include a hardware datapath acceleration engine for IPv4/IPv6 packet parsing, classification, and policing; dual 10/100/1000 Mbps Enhanced Three-Speed Ethernet (eTSEC) controllers; a 64-bit DDR2/DDR3 SDRAM memory controller with ECC; integrated security engine supporting DES, 3DES, AES, SHA-1/SHA-2, MD-5, and public-key acceleration; and a local bus controller with 16-bit data and 32-bit address. The device operates from 1.0 V core supply with 1.8 V, 2.5 V, and 3.3 V I/O supplies. Architecturally, the MPC8536 leverages the e500 Book-E compliant core, which integrates dual integer units and a single-precision floating-point unit. The on-chip fabric connects the core to the coherency module, the memory controller, and multiple high-speed serial interfaces. This wire-speed processing capability differentiates the MPC8536 from general-purpose PowerPC processors that require discrete traffic managers. Typical applications include enterprise routers and switches, WAN acceleration appliances, network security platforms, industrial control gateways, and LTE/4G small-cell base stations. The integrated security and protocol engines suit the device to VPN concentrators and deep-packet-inspection appliances. Lower-speed variants exist in the same family for cost-optimized designs. When designing with this device, allocate adequate PCB real estate for the 29x29 mm FCBGA and follow NXP's high-speed routing guidelines for the DDR2/DDR3 interface. Thermal management requires attention because of the high core frequency and integrated accelerators; a heatsink or thermal interface material is typically required. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes drawn from public datasheets and reference designs that go beyond the information available in the manufacturer datasheet alone.

RFQ যোগাযোগ
MPC8536AVTAQGA557 - PowerPC e500 1GHz MPU | NXP | Networking
MPC8536AVTAQGA557

MPC8536AVTAQGA557 - PowerPC e500 1GHz MPU | NXP | Networking

The NXP MPC8536AVTAQGA557 is a PowerPC e500-based microprocessor from the MPC85xx family, integrating one 32-bit core running at up to 1.0 GHz in a 783-ball FCPBGA (29x29 mm) package. It combines a high-performance embedded CPU core with on-chip peripherals commonly required in networking and industrial control platforms, and supports 1.8V, 2.5V, and 3.3V I/O signaling for flexible board integration. A microprocessor (MPU) is the central processing unit of an embedded system, packaged as a single integrated circuit with its own core, cache hierarchy, memory controller, and peripheral interfaces. Unlike a microcontroller (MCU), an MPU typically requires external DRAM/NOR/NAND and a companion chipset for system I/O. The MPC85xx line sits inside the broader taxonomy: MPU > embedded processor > SoC > semiconductor, and historically targets routers, switches, line cards, and storage controllers where deterministic performance and rich I/O are essential. Key features include a 32-bit PowerPC e500 core with dual-issue pipeline, integrated L1/L2 caches, a high-bandwidth system bus, three USB 2.0 interfaces, multiple gigabit Ethernet MACs, DDR memory controller, and PCI Express support. The 783-ball FCPBGA package is optimized for high-speed signal integrity, multi-layer PCB escape routing, and chassis-grade thermal dissipation. Operating temperature range is 0C to 90C (TA) for commercial-grade deployments. Architecturally, the MPC8536 uses a coherent core complex with hardware-assisted MMU and integrated security features, enabling wire-speed packet processing and low-latency I/O handling. Compared with discrete CPU + glue-logic designs, the integrated peripherals reduce BOM cost and board area while improving power-noise behavior. Typical applications include enterprise networking equipment (routers, switches, line cards), industrial control, secure gateways, single-board computers, and legacy telecommunications infrastructure. The combination of 1 GHz core speed and integrated I/O makes it suitable for control-plane workloads and packet forwarding at line rate. When designing with this MPU, allocate the largest possible PCB region to the BGA escape and follow NXP's reference layout guidelines for DDR impedance matching and SerDes routing. Plan for a multi-layer (>=8 layer) stack-up to maintain signal integrity on the high-speed parallel bus. This page synthesizes distributor pricing, drop-in equivalents, and practical design notes that are not aggregated in the manufacturer datasheet alone.

RFQ যোগাযোগ
MPC8536AVTATHA - PowerQUICC III 1.25GHz SoC MPU | NXP
MPC8536AVTATHA

MPC8536AVTATHA - PowerQUICC III 1.25GHz SoC MPU | NXP

The NXP MPC8536AVTATHA is a PowerQUICC III integrated communications processor, part of the MPC85xx PowerQUICC III family, integrating a PowerPC e500 single-core CPU at up to 1.25 GHz with advanced high-speed connectivity and on-chip peripherals for IP networking and embedded applications. The device ships in a 783-ball FC-PBGA (29 mm x 29 mm) package and supports a core voltage of 1.5 V with I/O voltages of 1.8 V, 2.5 V, and 3.3 V. It combines DDR2/DDR3 memory controller support, SDHC, PCI/PCIe, SATA, Gigabit Ethernet, and USB peripherals in a single SoC, reducing board real-estate versus discrete multi-chip implementations. A PowerQUICC III microprocessor is a Power Architecture SoC that integrates a PowerPC e500 core with system controllers, communication peripherals, and security engines, occupying a tier above standalone MPU cores in the broader embedded processor hierarchy (PowerPC e500 MPU -> PowerQUICC III SoC -> embedded processor -> communications SoC). The MPC8536 specifically belongs to NXP's mid-range PowerQUICC III line, balancing raw GHz-class compute with rich connectivity for routers, switches, networked printers, industrial controls, and secure network appliances. Key differentiating features include a 32-bit Power Architecture e500 core with dual-issue superscalar execution, hardware-accelerated encryption (SEC 3.0 engine, on the 'E' variant - this 'non-E' part has the engine disabled/bypassed), and integrated gigabit Ethernet MACs with QoS support. The MPC8536AVTATHA variant supports operating temperatures of 0 to 90 °C (commercial grade), distinguishing it from -40 to 125 °C industrial-grade siblings. On-chip flexibility includes up to four GbE ports, dual SATA controllers, USB 2.0, and PCIe x4 / PCI 2.3 interfaces, simplifying BOM count for storage and networking subsystems. The architecture pairs the e500 core with a 256-bit internal data path to L2 cache and dedicated fabric paths to per-controller logic, allowing simultaneous wire-rate Ethernet and storage I/O without CPU stall. NXP's PowerQUICC III platform shares the same 783-ball FC-PBGA footprint across speed bins (e.g. MPC8536BVJATHA at 800 MHz, MPC8536AVTANGA at 1.0 GHz), enabling one PCB design to support multiple SKUs. Typical applications include SMB/SME routers, managed industrial Ethernet switches, networked storage controllers, secure edge gateways, and protocol-conversion appliances. The wide I/O compatibility reduces level-shifters in mixed-voltage designs, ideal where DDR2/DDR3 memories coexist with 3.3 V legacy peripherals. When designing in, ensure proper FC-PBGA PCB layout with matched-impedance SERDES traces and thermal vias to the 783-ball land pad for sustained 1.25 GHz operation. Use NXP-supplied DDR2/3 reference schematics to validate write-leveling and gate-training timing across temperature. This page synthesizes current distributor pricing, same-package drop-in alternatives, and practical design notes for the MPC8536AVTATHA that go beyond the datasheet.

RFQ যোগাযোগ
MPC8536AVTAULA - PowerQUICC III SoC, 1.333GHz, 783-FCBGA | NXP
MPC8536AVTAULA

MPC8536AVTAULA - PowerQUICC III SoC, 1.333GHz, 783-FCBGA | NXP

The NXP MPC8536AVTAULA is a PowerQUICC III microprocessor (e500 core) operating at up to 1.333 GHz in a 783-ball FCBGA (29x29 mm) package. It belongs to the MPC85xx family and integrates a 32-bit Power Architecture core with on-chip peripherals targeting networked and embedded applications. A microprocessor (MPU) is an integrated circuit that contains the CPU, on-chip caches, memory controllers, and a wide range of peripheral interfaces on a single die. The PowerQUICC III family sits at the top of NXP's Power Architecture portfolio (e500 -> Power Architecture -> 32-bit MPU -> embedded processor -> system-on-chip) and is widely deployed in routers, switches, and industrial control where deterministic performance and rich I/O are mandatory. Key features of the MPC8536AVTAULA include a 1.333 GHz e500 core, integrated DDR2/DDR3 memory controller, SDHC, PCI/PCIe, SATA, Gigabit Ethernet, and USB 2.0 interfaces. The part supports multiple I/O voltages (1.5 V, 1.8 V, 2.5 V, 3.3 V) and operates over a 0 to 90 C commercial temperature range. The 783-FCBGA package uses a flip-chip land grid array construction that maximizes I/O density while keeping the board footprint at 29x29 mm. The device is built on a 90 nm process technology and uses a 32-bit Power Architecture instruction set. Integrated SRAM, L1/L2 cache hierarchy, and dedicated engines for packet processing, security, and DMA offload allow the device to handle complex application workloads while leaving the core free for application logic. Typical applications include IP networking and telecom routers, industrial automation and machine control, secure networked storage, single-board computing, and avionics/datacom backplanes. The combination of high CPU frequency and integrated peripheral mix makes it suited to multi-protocol gateway designs. When selecting the MPC8536AVTAULA, verify host board power sequencing and decoupling against the manufacturer recommended power-rail topology. The FCBGA requires precise PCB land pattern registration and controlled-impedance traces for DDR, PCIe, and SERDES lanes to meet interface compliance at gigahertz speeds. This page consolidates distributor inventory, dropped-in cross-reference data, and design notes, going beyond any single manufacturer datasheet to support sourcing and second-source qualification.

RFQ যোগাযোগ
MPC8536AVTAVLA557 - PowerQUICC III 1.5GHz MPU | NXP
MPC8536AVTAVLA557

MPC8536AVTAVLA557 - PowerQUICC III 1.5GHz MPU | NXP

The NXP MPC8536AVTAVLA557 is a PowerQUICC III integrated microprocessor based on the PowerPC e500 core, operating at up to 1.5 GHz with a 32-bit architecture, housed in a 783-ball FCPBGA (29x29) package. The device combines a high-performance e500 processor core with advanced peripherals, integrated security, and high-speed interconnect for networking, telecom, and industrial control applications. An embedded microprocessor (MPU) is a CPU-centric system-on-chip that integrates processing cores, memory controllers, and I/O peripherals into a single package. The MPC85xx family sits in the broader hierarchy of microprocessor -> SoC -> integrated circuit -> semiconductor. PowerQUICC III processors are widely deployed in wired networking equipment, where they balance processing throughput with deterministic I/O handling. Key features of the MPC8536AVTAVLA557 include a 1.5 GHz e500 core with double-precision floating point, integrated DDR2/DDR3 memory controller with ECC support, multiple Gigabit Ethernet controllers, PCI Express and Serial RapidIO interfaces, and hardware encryption acceleration. The device supports hardware virtualization and includes a flexible multi-protocol SerDes for high-speed serial connectivity. The MPC8536AVTAVLA557 utilizes a deep-pipeline superscalar e500 core with out-of-order execution, paired with a high-bandwidth on-chip fabric to sustain throughput across multiple concurrent data streams. The integrated security engine performs AES, DES/3DES, SHA, and RSA operations without burdening the host core, while the DPAA-style accelerators help with packet parsing and queue management. Typical applications include enterprise routers, Ethernet switches, wireless base stations, industrial control gateways, and networked storage controllers. The combination of Gigabit Ethernet, PCI Express, and RapidIO connectivity makes it a flexible platform for high-throughput embedded designs. Per the NXP product brief, the PowerQUICC III family targets IP network infrastructure and advanced media processing workloads. When designing with the MPC8536AVTAVLA557, careful attention must be paid to multi-layer PCB stack-up for the high-speed DDR and SerDes interfaces. The 29x29 mm FCPBGA package requires controlled-impedance routing and matched-length traces to maintain signal integrity across DDR and PCIe lanes. This page synthesizes distributor pricing, lifecycle context, and practical design considerations for the MPC8536AVTAVLA557 that complement the manufacturer datasheet and reference manual.

RFQ যোগাযোগ
MPC8536BVJAKGA557 - PowerPC e500 MPU 600MHz 783-FCPBGA | NXP
MPC8536BVJAKGA557

MPC8536BVJAKGA557 - PowerPC e500 MPU 600MHz 783-FCPBGA | NXP

The NXP Semiconductors MPC8536BVJAKGA557 is a PowerPC e500-based microprocessor in the MPC85xx family, integrating a single 32-bit core running at 600 MHz inside a 783-ball FCPBGA (29x29) package. The MPC8536 line targets cost-sensitive embedded networking and industrial control applications that require deterministic Power Architecture processing with integrated peripherals and a high-bandwidth system bus. A PowerPC e500 microprocessor is a 32-bit embedded processor core designed by Freescale/NXP, based on the Power Architecture Book E specification with hardware virtualization and signal-processing extensions. The MPC8536 belongs to the MPC85xx QorIQ family, which sits within the broader hierarchy of PowerPC processors -> Power Architecture embedded CPUs -> microprocessors (MPU) -> integrated circuits. Compared with ARM Cortex-A application cores, the e500 emphasizes deterministic interrupt latency and mature toolchain support for networking workloads. Key features of the MPC8536BVJAKGA557 include a 600 MHz e500 core, integrated DDR2 memory controller, dual 10/100/1000 Ethernet controllers with SGMII support, four DMA channels, PCI Express interface, and a flexible local bus controller. The 'BV' suffix indicates the extended-temperature 0C to 105C junction range, 'JA' denotes the 783-FCPBGA package, 'KG' marks the 600 MHz speed bin, and the trailing 'A557' is a custom factory suffix typically used for traceability on long-life industrial and networking SKUs. According to the NXP MPC8536 datasheet, the device is built on a 90 nm CMOS process. Typical applications include industrial routers and managed Ethernet switches, factory automation PLCs, telecom line cards, and military/aerospace embedded controllers. The integrated Gigabit Ethernet MACs and PCI Express make it well-suited for line-rate packet processing without an external switch fabric. Designers should ensure the 783-ball FCPBGA land pattern uses a 1.0 mm ball pitch with matched-length DDR2 traces and proper thermal vias under the exposed die. Power estimation must include the 1.0 V core rail (VDD) and the 2.5 V/3.3 V I/O rails (GVDD/OVDD) per the hardware specification. This page synthesizes NXP/Freescale datasheet values, distributor pricing, and cross-reference alternatives not consolidated on a single manufacturer page.

RFQ যোগাযোগ
MPC8536BVJANGA - PowerQUICC III SoC, 800MHz, 783-FCBGA | NXP
MPC8536BVJANGA

MPC8536BVJANGA - PowerQUICC III SoC, 800MHz, 783-FCBGA | NXP

The NXP MPC8536BVJANGA is a PowerQUICC III integrated communications processor built around a PowerPC e500 core running up to 800 MHz, housed in a 783-ball FCBGA (FC-PBGA) package measuring 29x29 mm. The SoC integrates DDR2/DDR3 memory controllers, PCI/PCIe, SATA, GbE, USB, and SDHC peripherals in a single device. The MPC8536E family targets gigahertz-class complex application processing for IP networking and advanced media processing workloads. A PowerQUICC (pronounced "power-quick") processor is a family of communications-oriented system-on-chip devices originally developed by Motorola Freescale and now maintained by NXP. These SoCs combine one or more PowerPC cores with specialized communications engine blocks, memory controllers, and high-speed serial interfaces. The MPC8536E belongs to the PowerQUICC III lineage and sits in the broader taxonomy: application processor -> embedded SoC -> networking processor -> PowerQUICC family -> MPC85xx series. Understanding this hierarchy is important because it indicates target use cases — wired/wireless infrastructure, industrial control, and storage — and explains the rich peripheral mix. Key specifications include a 32-bit PowerPC e500 core at 800 MHz, support for DDR2/DDR3 with ECC, integrated SATA II and Gigabit Ethernet MACs, PCIe and PCI interfaces, USB 2.0 with PHY, and SDHC host controller. The device supports operating temperatures from 0°C to 105°C (commercial grade) and runs from multiple rails at 1.0 V core, 1.5 V / 1.8 V DDR, and 2.5 V / 3.3 V I/O. The 783-FCBGA package delivers the routing density required for high-speed parallel interfaces while keeping the board footprint at industry-standard 29x29 mm. From an architectural perspective, the e500 core implements the Book-E PowerPC instruction set with a seven-stage pipeline, hardware MMU, and a double-precision FPU option. Memory coherency between the core and the on-chip communications engines is handled by a coherent platform fabric. Security features include a hardware random-number generator, secure boot, and tamper detection for trusted platform applications. Typical applications include network routers, industrial gateways, networked printers, single-board computers, and storage controllers. The combination of Gigabit Ethernet, SATA, PCIe, and DDR3 support makes it ideal for fanless networking appliances and small-form-factor industrial PCs. When designing with this part, allocate at least 4 PCB layers with dedicated ground planes, place decoupling within 5 mm of each supply ball, and follow NXP's AN3534 routing guidelines for DDR3 byte lanes to maintain signal integrity on memory clocks up to 667 MHz. This page synthesizes distributor pricing, parameter cross-references, and design guidance not found in the manufacturer's datasheet summary, with same-package pin-compatible alternatives surfaced for end-of-life risk mitigation.

RFQ যোগাযোগ
MPC8536BVTAKGA - PowerQUICC III SoC, 600MHz e500, 783-FCPBGA | NXP
MPC8536BVTAKGA

MPC8536BVTAKGA - PowerQUICC III SoC, 600MHz e500, 783-FCPBGA | NXP

The NXP (formerly Freescale) MPC8536BVTAKGA is a PowerQUICC III integrated communications processor built on the Power Architecture e500 core, running at up to 600 MHz in a 783-ball FCBGA (29x29 mm) package. The device integrates a single 32-bit e500 processor core with DDR2/DDR3 memory controllers, SDHC, PCI/PCIe, SATA, Gigabit Ethernet, and USB interfaces for embedded networking applications. A PowerQUICC III SoC is a Power Architecture-based system-on-chip originally designed by Freescale (acquired by NXP) for IP network, storage, and industrial gateway applications. It sits in the broader hierarchy: communications processor -> application processor -> microprocessor -> integrated circuit. By integrating high-speed serial interfaces and a memory controller on-die, PowerQUICC III parts eliminate the need for external bridges and reduce BOM cost in routers, switches, and edge appliances. Key features of the MPC8536BVTAKGA include a 600 MHz e500 core, integrated DDR2/DDR3 SDRAM controller with ECC, four Gigabit Ethernet ports, dual PCI/PCIe interfaces, SATA host support, USB 2.0, SD/MMC host controller, security acceleration, and an operating temperature range of 0 to 105 degrees C. The non-E variant omits the integrated security engine. The device is targeted at extended-temperature industrial and networking environments where reliability and long-life-cycle silicon are required. Architecturally, the MPC8536B uses a hierarchical bus structure with a 256-bit internal core complex bus and multiple I/O controllers arbitrated through a high-speed crossbar. The e500 core includes a double-precision FPU, MMU, and 32 KB instruction/data L1 caches. A hardware coherency module keeps external masters and the core coherent in shared-memory designs. Typical applications include industrial routers and switches, network attached storage, factory automation gateways, multi-protocol industrial Ethernet nodes, and embedded control systems that require deterministic networking with deterministic boot behavior. The wide operating temperature range and long-life-cycle silicon make it well suited for industrial control cabinets. When designing with this part, ensure the PCB has a minimum 6-layer stack-up to route the DDR3 controller cleanly, place the 0.1 microfarent decoupling capacitors adjacent to every power ball pair, and use length-matched routing on the SATA and PCIe differential pairs. A full BSDL and U-Boot port is recommended for production deployment.

RFQ যোগাযোগ
MPC8536BVTAKGA557 - PowerPC e500 MPU 600MHz 783-FCPBGA | NXP
MPC8536BVTAKGA557

MPC8536BVTAKGA557 - PowerPC e500 MPU 600MHz 783-FCPBGA | NXP

The NXP MPC8536BVTAKGA557 is a PowerPC e500 microprocessor from the MPC85xx family, integrating a single 32-bit core running at 600 MHz in a 783-ball FCPBGA (29x29) package. The device targets embedded networking and communications workloads, combining an integrated security engine, DDR2/DDR3 memory controller, and multiple high-speed serial interfaces including Gigabit Ethernet, PCI Express, and Serial RapidIO on a single die. What is a PowerPC e500 microprocessor? The e500 is a superscalar embedded processor core derived from the Power Architecture, optimized for low-power, high-throughput communications and networking workloads. Within the broader taxonomy, the e500 sits inside the PowerPC microprocessor family, which itself belongs to the MPU (microprocessor unit) tier of integrated circuits and ultimately to the broader class of embedded processors. The MPC85xx series integrates the e500 core alongside system logic, allowing single-chip designs for routers, switches, and industrial control equipment. Key features include the e500 core with dual-issue out-of-order execution, integrated security acceleration for IPsec, SSL/TLS, and SRTP workloads, four Gigabit Ethernet controllers with SGMII support, three PCI Express Gen 1.1 controllers, two Serial RapidIO endpoints, and a 64-bit DDR2/DDR3 memory controller with ECC. The device supports hardware virtualization through the embedded hypervisor features of the e500 core. The MPC8536BVTAKGA557 architecture pairs the e500 pipeline with a coherent system bus, on-chip SRAM, and a DMA engine that offloads data movement from the core. This combination delivers deterministic throughput for packet processing tasks while leaving CPU cycles available for control-plane software. The 783-FCPBGA package exposes the full SerDes and memory interface, requiring a multi-layer PCB with impedance-controlled routing. Typical applications include enterprise routers, wired and wireless access points, industrial gateways, networked printers, multi-function peripherals, and LTE small-cell base stations. The integrated security engine makes it suitable for VPN concentrators and IPsec-aware networking equipment. In storage systems, the combination of RapidIO and PCI Express enables high-throughput controller designs. When designing with this part, ensure the PCB provides matched-length routing for DDR2/DDR3, controlled-impedance SerDes lanes, and adequate decoupling across the 783-ball grid. The thermal envelope requires attention because the 29x29 mm BGA concentrates heat; airflow or a heatsink is recommended for industrial temperature operation. This page synthesizes distributor pricing, drop-in same-package variants, and practical design notes that go beyond the manufacturer datasheet, helping engineers select between operating-speed grades and qualify the part for embedded networking designs.

RFQ যোগাযোগ
MPC8536BVTANGA - PowerQUICC III 800MHz e500 MPU | NXP Semiconductors
MPC8536BVTANGA

MPC8536BVTANGA - PowerQUICC III 800MHz e500 MPU | NXP Semiconductors

The NXP Semiconductors MPC8536BVTANGA is a PowerQUICC III integrated communications microprocessor built on the Power Architecture e500 core, delivering 800 MHz CPU performance in a 783-pin FCBGA (29x29 mm) package. It integrates gigahertz-class processing with high-speed connectivity interfaces, targeting IP network and advanced embedded applications. Key parameters include 32-bit data bus width, 1.1 V core supply, 1.5/1.8/2.5/3.3 V I/O supplies, and operating temperature of 0C to 105C. A microprocessor (MPU) is an integrated circuit that contains the central processing unit, cache, memory controller, and peripheral interfaces of a computer system on a single die. The MPC85xx family belongs to the Power Architecture microprocessor hierarchy, sitting under the broader PowerPC processor lineage and the wider RISC processor category. PowerQUICC III parts combine CPU cores with communications peripherals, making them a subclass of system-on-chip (SoC) devices optimized for networking and telecom workloads rather than general-purpose compute. Key features of the MPC8536BVTANGA include integrated DDR2/DDR3 memory controller with ECC, dual Gigabit Ethernet controllers, SATA controller, dual PCI/PCIe controllers, SDHC interface, and USB 2.0 interface. The e500 core includes a 32 KB L1 instruction cache and 32 KB L1 data cache, plus a 256 KB unified L2 cache with ECC support. Hardware-accelerated cryptography is absent on this non-E variant, distinguishing it from the MPC8536E which adds SEC 2.0 acceleration. The architecture pairs the e500 core with a system bus and peripheral block, allowing concurrent operation of the CPU and I/O subsystems. The device uses a 783-pin FCBGA (Flip-Chip Ball Grid Array) package with 1 mm ball pitch, requiring multi-layer PCB design with controlled-impedance routing and matched-length DDR traces for reliable operation. Common applications include IP network routers, secure routers, industrial control gateways, network-attached storage (NAS) controllers, and wireless base station controllers. The wide integration of communications peripherals makes it suitable for designs that previously required a CPU plus multiple companion ICs. When designing with the MPC8536BVTANGA, ensure the PCB supports the FCBGA thermal envelope (case temperature must stay below 105C). Provide adequate decoupling across all supply rails and follow NXP's reference design for DDR trace length matching. Production designs should validate boot code against the specific revision of the integrated development environment. This page synthesizes distributor pricing, drop-in alternative MPNs within the MPC85xx family, and practical design considerations not consolidated in the manufacturer datasheet alone.

RFQ যোগাযোগ
MPC8536BVTAULA - PowerQUICC III 1.333GHz MPU 783-FCBGA | NXP
MPC8536BVTAULA

MPC8536BVTAULA - PowerQUICC III 1.333GHz MPU 783-FCBGA | NXP

The NXP MPC8536BVTAULA is a PowerQUICC III microprocessor integrating a 32-bit Power Architecture e500 core running up to 1.333 GHz (scaling to 1.5 GHz in higher-speed grades) with a high-bandwidth system-on-chip (SoC) fabric in a 783-ball FCBGA (29x29 mm, 1 mm pitch) package. It targets gigahertz-class complex application processing and includes DDR2/DDR3 memory controllers, integrated security (SEC), SATA, Gigabit Ethernet, USB, PCI/PCIe, SDHC, and SerDes interfaces for industrial, networking, and storage systems. A PowerQUICC III MPU (Microprocessor Unit) is a system-on-chip that combines a Power Architecture CPU core with communications peripherals, making it a member of the broader microprocessor -> embedded processor -> SoC -> semiconductor hierarchy. The MPC8536BVTAULA specifically targets the convergence of control-plane processing and high-speed data-plane I/O for routing, switching, and gateway applications, integrating peripherals that previously required discrete components. Key features include a 32-bit e500 core with 36-bit physical addressing, 783-FCBGA package, 1.333 GHz core frequency, integrated DDR2/DDR3 memory controller with ECC, dual Gigabit Ethernet controllers with SerDes, dual SATA ports, USB 2.0, dual PCI/PCIe controllers, SDHC, four I2C, DUART, and a security engine (SEC 2.0/3.0). The device supports 0C to 105C extended operating temperature, making it suitable for thermally constrained embedded deployments. The architecture pairs an e500 core with a high-speed coherency fabric, on-chip L2 cache (typically 256 KB), and a multi-protocol peripheral cluster. The integrated security engine accelerates IPSec and SSL/TLS, and the SerDes lanes can be configured for SGMII, PCI Express, SATA, or Aurora protocols. The result is a single chip that replaces what previously required a CPU plus a multi-ASIC communications backend. Typical applications include industrial routers and gateways, networked storage controllers (NAS/iSCSI), factory automation controllers, secure VPN concentrators, smart grid / IEC 61850 communication processors, military/aerospace networking, and medical imaging systems. The MPC8536BVTAULA is also commonly designed into long-life-cycle industrial platforms that require ten-year-plus supply continuity. When designing with this device, allocate ample power and ground for the FCBGA and follow NXP's reference PCB stack-up. A JTAG header for code debug, isolated supplies for analog and SerDes rails, and adequate thermal relief (heatsink or chassis mount) are strongly recommended at full 1.333 GHz operation. This page synthesizes distributor pricing, drop-in NXP PowerQUICC III alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFQ যোগাযোগ
MPC8536CVTAKG - PowerQUICC III 600MHz e500 MPU | NXP
MPC8536CVTAKG

MPC8536CVTAKG - PowerQUICC III 600MHz e500 MPU | NXP

The NXP (formerly Freescale) MPC8536CVTAKG is a PowerQUICC III integrated processor built around a single-core PowerPC e500 core running at up to 600 MHz, packaged in a 783-ball FC-PBGA measuring 29x29 mm. As part of the MPC8536 family, this device targets industrial temperature grade applications and integrates a high-performance system-on-chip architecture combining an e500 core, memory controllers, and a rich set of peripherals for embedded networking and industrial designs. The CVTAKG ordering suffix specifies the industrial temperature range, 600 MHz core speed, and the FC-PBGA-783 package. A microprocessor (MPU) such as the MPC8536 is a programmable integrated processor that executes software instructions, manages system control logic, and orchestrates peripheral devices. It sits at the top of the embedded computing hierarchy, above microcontrollers (MCUs) in software complexity and performance, and is commonly used in networking, telecom, and industrial control platforms. PowerQUICC III devices like the MPC8536 specifically target communications infrastructure by integrating flexible peripheral interfaces, multi-protocol support, and deterministic interrupt handling required by carrier-grade systems. Key features of the MPC8536CVTAKG include a single 32-bit PowerPC e500 core operating at 600 MHz, integrated L1 cache, dual DDR memory controllers supporting DDR2 memory, four Gigabit Ethernet controllers with hardware acceleration, multiple PCI Express interfaces, and a security engine. The 783-ball FC-PBGA package provides high-density I/O required by the device's peripheral set while supporting industrial-grade thermal operation. The architecture combines the e500 core with a high-bandwidth system bus interconnecting L2 cache, DDR2 memory controller, and I/O peripherals. This design optimizes data throughput for packet processing while maintaining deterministic latency for control plane tasks, making the device suitable for simultaneous data and control workloads in industrial networking equipment. Typical applications include industrial-grade network routers and switches, telecom base station controllers, factory automation gateways, industrial IoT edge controllers, and embedded server appliances. The combination of CPU performance, multi-protocol I/O, and industrial temperature qualification makes the MPC8536CVTAKG well-suited for harsh-environment networking and control applications. When designing with this device, careful attention must be paid to power delivery sequencing for the multiple voltage rails, signal integrity on the high-speed DDR2 and Gigabit Ethernet interfaces, and thermal management of the FC-PBGA package. PCB layout should follow the manufacturer's reference design exactly for impedance-controlled interfaces, and decoupling must be sized per the application note guidance for PowerQUICC III devices. This page synthesizes distributor pricing, drop-in family variants, and practical design notes not found in the manufacturer datasheet alone, providing engineering decision support beyond the raw device documentation.

RFQ যোগাযোগ