মাইক্রোকন্ট্রোলার

পণ্য (20,000+)

PIC12F1612-E/MF - 8-bit MCU, 3.5KB Flash, 32MHz, 8-DFN | Microchip
PIC12F1612-E/MF

PIC12F1612-E/MF - 8-bit MCU, 3.5KB Flash, 32MHz, 8-DFN | Microchip

The Microchip Technology PIC12F1612-E/MF is an 8-bit PIC microcontroller from the PIC12F family featuring a RISC architecture, 3.5KB of program Flash memory, and an 8-pin VDFN (DFN) exposed-pad package. The device runs at up to 32MHz clock speed with a wide operating voltage range of 2.5V to 5.5V, and integrates a 10-bit ADC, capture/compare/PWM (CCP), 24-bit Signal Measurement Timer (SMT), and zero-cross detect peripherals for embedded motor and general-purpose control applications. An 8-bit microcontroller (MCU) is a small, low-power computing device built around an 8-bit data path and integrated Flash program memory, peripherals, and a CPU core on a single die. The PIC12F1612 belongs to the PIC12F family, which sits within the broader PIC microcontroller hierarchy: 8-bit MCU -> PIC microcontroller -> Microchip MCU portfolio -> embedded computing devices. Low-pin-count PIC12F parts are designed for cost- and space-sensitive designs that still need hardware timers, ADC, and PWM. Key differentiating features of the PIC12F1612 include its on-chip 24-bit Signal Measurement Timer (rare in 8-pin MCUs), zero-cross detection logic for AC-line dimming, complementary waveform generator (CWG), numerically controlled oscillator (NCO), and configurable logic cell (CLC). These peripherals enable motor control, lighting, and signal conditioning without external components. The internal oscillator reduces BOM cost, and the wide 2.5V to 5.5V supply range supports both 3.3V and 5V system rails. The PIC12F1612 uses a Harvard-architecture RISC core with a single-cycle instruction set, enabling deterministic instruction timing. Its analog front-end pairs a 10-bit ADC with comparators and a fixed-voltage reference, while digital peripherals (CCP, CWG, NCO, CLC) provide flexible waveform synthesis. Code protection, low-voltage programming, and In-Circuit Serial Programming (ICSP) support simplify prototyping and field updates. Typical applications include low-end motor control (small DC and brushed motors), AC-line dimming with zero-cross detection, LED lighting and color mixing, sensor signal conditioning, and general-purpose embedded control in white goods, fans, and small appliances. The wide temperature range (-40C to +125C) and small footprint also suit automotive body and industrial sensor nodes. When designing with this part, route the exposed pad (EP) to a solid ground plane for thermal dissipation and electrical reference, and follow Microchip's DFN PCB layout guidelines for the 8-VDFN package. Programming via ICSP requires the standard PGD/PGC pin pair. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes that complement the manufacturer datasheet.

RFQ যোগাযোগ
PIC12F1612-E/SN - 8-bit 32MHz MCU, 3.5KB Flash | Microchip
PIC12F1612-E/SN

PIC12F1612-E/SN - 8-bit 32MHz MCU, 3.5KB Flash | Microchip

The Microchip Technology PIC12F1612-E/SN is an 8-bit PIC RISC microcontroller with 32MHz internal oscillator, 3.5KB (2K x 14) Flash program memory, 256 bytes RAM, and 256 bytes data EEPROM in an 8-pin SOIC package. It operates from 2.5V to 5.5V and integrates 6 I/O pins, 6 timers, a 1-channel 8-bit DAC, and a 4-channel 10-bit ADC. The -E suffix denotes the extended industrial temperature grade of -40C to +125C, while /SN indicates the 8-pin SOIC (150-mil narrow-body) package. What is an 8-bit microcontroller? An 8-bit microcontroller is a small, self-contained computing core on a single IC that fetches, decodes, and executes 8-bit-wide instructions from on-chip Flash memory. PIC12-series parts belong to Microchip's baseline-and-mid-range 8-bit family, positioned hierarchically below PIC16 (mid-range) and PIC18 (enhanced) parts in the broader PIC taxonomy of microcontrollers -> embedded controllers -> semiconductor ICs. The PIC12F1612's distinctive value is on-chip motor-control peripherals such as 24-bit Signal Measurement Timer (SMT), Zero-Cross Detect (ZCD), and Complementary Waveform Generator (CWG), which are uncommon in this pin-count class. Key features include 3.5KB self-programmable Flash with 10,000 erase/write cycles, 256 bytes RAM, 256 bytes EEPROM, a 10-bit ADC with 4 channels and up to 100 ksps conversion rate, an 8-bit DAC, multiple timer modules including the 24-bit SMT for precise time measurement, and Capture/Compare/PWM (CCP) peripherals. The integrated Zero-Cross Detect simplifies AC-line sensing without external optocouplers, and the CWG generates complementary PWM waveforms for driving MOSFET half-bridges in low-power motor control. The PIC12F1612 uses Microchip's enhanced mid-range 8-bit CPU core with a 14-bit instruction word, single-cycle execution except for branches, and a hardware stack for fast context switching. The internal 32MHz oscillator is factory calibrated to +/-1% and supports a wide operating voltage range for both battery and 5V rail applications, while the integrated 4-channel 10-bit ADC enables direct sensor interfacing without external signal conditioning. Typical applications include small DC motor control in fans and pumps, AC-line dimming and zero-cross switching, LED lighting control with PWM and CWG outputs, battery-powered IoT sensor nodes, and general-purpose embedded control in appliances and consumer products. The combination of SMT, ZCD, and CWG peripherals in an 8-pin footprint is rare in the marketplace and is the primary reason engineers select this part over generic PIC12F alternatives. When designing with this device, take care to bypass VDD with a 100nF ceramic capacitor placed within 5mm of the pin, and ensure MCLR is pulled high through a 10k resistor for normal operation. The internal oscillator eliminates external crystals for most uses but may not suit USB or precise-timing applications, where a PIC16F or PIC18F part with an external oscillator is preferred. This page synthesizes distributor pricing, drop-in compatible alternatives from Microchip's PIC12 family, and practical design notes not aggregated on a single manufacturer or distributor page.

RFQ যোগাযোগ
PIC12F1612-I/MF - 8-bit MCU, 32MHz, 3.5KB Flash, 8-DFN | Microchip
PIC12F1612-I/MF

PIC12F1612-I/MF - 8-bit MCU, 32MHz, 3.5KB Flash, 8-DFN | Microchip

The Microchip Technology PIC12F1612-I/MF is an 8-bit PIC microcontroller running up to 32 MHz, equipped with 3.5 KB (2K x 14) of Flash program memory, 256 bytes of SRAM, and 256 bytes of EEPROM, housed in an 8-pin DFN (3x3 mm) package. The device integrates core-independent peripherals such as a 10-bit ADC with Computation (ADCC), a 24-bit Signal Measurement Timer (SMT), Complementary Waveform Generator (CWG), Numerically Controlled Oscillator (NCO), and Configurable Logic Cells (CLC), enabling complex control tasks without CPU intervention. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory (typically Flash), working RAM, and a rich set of on-chip peripherals such as timers, ADC, communication interfaces, and I/O pins. The PIC12F1612 belongs to the PIC® 12F family of 8-bit microcontrollers, positioned in Microchip's mid-range PIC portfolio as an 8-pin compact MCU for embedded control of small motors, LED lighting, sensor signal conditioning, and general-purpose applications. Its position in the broader taxonomy is: PIC12F1612 -> PIC12F family -> 8-bit PIC MCU -> Microcontroller -> Semiconductor. Key features of the PIC12F1612 include six I/O pins sharing six peripheral functions, two 8-bit timers plus one 16-bit timer, a 10-bit ADC with oversampling and averaging, hardware limit timer, and zero-cross detection. The device operates from 2.5 V to 5.5 V and supports industrial temperature range of -40 °C to +85 °C. An internal 32 MHz oscillator with ±1 % accuracy eliminates the need for an external crystal in most designs, reducing BOM cost and PCB area. The architecture is built on Microchip's enhanced mid-range 8-bit core using a 14-bit instruction set, providing single-cycle operation for most instructions at 32 MHz (125 ns instruction cycle). On-chip peripherals like CWG and NCO offload waveform synthesis and frequency generation from the CPU, enabling deterministic hardware-driven control loops useful for motor drive, dimming, and pulse generation. The wide peripheral set allows a single MCU to replace multiple analog/discrete components. Typical applications include small DC motor and fan control, LED lighting dimming and color mixing, capacitive-touch user interfaces, sensor signal conditioning with hardware averaging, and compact consumer appliances. The 8-DFN 3x3 mm footprint makes it well-suited for space-constrained designs. When designing with the PIC12F1612, ensure proper decoupling (100 nF + 1 µF) close to VDD, and verify that the total I/O sink/source current budget (per-pin and per-port) is respected for LED or relay drive scenarios. Always check the latest PIC12F1612 errata document for known device issues during firmware development. This page synthesizes distributor pricing, drop-in alternative MCUs, and practical design notes not found in the manufacturer datasheet alone, helping engineers evaluate the PIC12F1612-I/MF against its PIC12F1571, PIC12F1572, and PIC12F1501 siblings, as well as automotive-grade -Q variants.

RFQ যোগাযোগ
PIC12F1612-I/P - 8-Bit MCU, 3.5KB Flash, 32MHz | Microchip
PIC12F1612-I/P

PIC12F1612-I/P - 8-Bit MCU, 3.5KB Flash, 32MHz | Microchip

The Microchip Technology PIC12F1612-I/P is an 8-bit PIC microcontroller with 3.5KB Flash, 256 bytes RAM, and a 32MHz internal oscillator, housed in an 8-pin PDIP through-hole package. It operates from 2.5V to 5.5V and integrates peripherals including a 10-bit ADC, CCP, 24-bit SMT (Signal Measurement Timer), Zero-Cross Detection, and a complementary waveform generator. A PIC microcontroller is a compact, RISC-based 8-bit microprocessor with on-chip Flash, RAM, and peripherals, designed for embedded control tasks. PIC12F16xx devices sit at the low end of the PIC12 family hierarchy, which is part of the broader Microchip 8-bit MCU portfolio spanning PIC10, PIC12, PIC16, and PIC18 families. These tiny MCUs are optimized for cost-sensitive, low-pin-count applications where a full 28- or 40-pin device is overkill. Key features of the PIC12F1612 include 3.5KB (2K x 14) self-programmable Flash program memory, 256 bytes of RAM, 6 I/O pins, an enhanced mid-range 14-bit instruction set, and a 32MHz internal oscillator that eliminates the need for an external crystal. Additional capabilities include a 10-bit ADC with up to 8 channels, 2 PWM modules, I2C and SPI, and a 24-bit SMT for precision timing. The device uses Microchip's enhanced mid-range core with a 14-bit instruction word, supporting interrupts, hardware stack, and 49 instructions. The internal 32MHz oscillator delivers 8 MIPS performance, suitable for motor control loops, LED dimming, and simple state machines without an external clock component. Typical applications include small motor control (BLDC, stepper), general-purpose embedded control, IoT edge nodes, fan control, LED lighting, and consumer appliances. The Zero-Cross Detection and 24-bit SMT make it well-suited for AC line-voltage control and energy metering. When designing with this MCU, allocate at least 1.5KB of Flash for bootloader and application code, use the internal 32MHz oscillator to minimize BOM, and place a 0.1uF decoupling capacitor as close as possible to VDD. The -I/P industrial temperature grade supports -40C to +85C operation. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing engineers with a single decision-ready reference for selecting and sourcing the PIC12F1612-I/P.

RFQ যোগাযোগ
PIC12F1612T-I/MF - 8-bit MCU, 3.5KB Flash, 32MHz | Microchip
PIC12F1612T-I/MF

PIC12F1612T-I/MF - 8-bit MCU, 3.5KB Flash, 32MHz | Microchip

The Microchip Technology PIC12F1612T-I/MF is an 8-bit PIC microcontroller featuring 3.5KB Flash program memory, 256 bytes of RAM, and a 32 MHz internal oscillator, housed in an 8-pin VDFN (Dual Flat No-lead) exposed-pad package. The "T" suffix denotes tape-and-reel packaging, "I" indicates the industrial temperature grade (-40C to +85C), and "MF" specifies the 8-pin VDFN package with an exposed thermal pad. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (RAM), and programmable I/O peripherals. The PIC12 family belongs to Microchip's 8-bit mid-range core architecture, sitting within the broader taxonomy of embedded microcontrollers -> microcontrollers -> microprocessors -> semiconductors. The PIC12F1612 specifically targets low pin-count applications where compact size, integrated peripherals, and low power are critical. Key differentiating features include on-chip 10-bit Analog-to-Digital Conversion (ADC), Capture/Compare/PWM (CCP) modules, 24-bit Signal Measurement Timer (SMT), Zero-Cross Detection, and Math Accelerator peripherals. These integrated features reduce external component count and BOM cost while supporting applications such as small motor control, LED driving, and sensor signal conditioning. The device operates from 2.3V to 5.5V across the industrial temperature range, providing flexibility for both 3.3V and 5V system designs. The internal 32 MHz oscillator eliminates the need for an external crystal in cost-sensitive designs, and the exposed thermal pad enhances power dissipation for applications running at higher clock rates or in thermally constrained enclosures. Typical applications include small DC motor control (fans, blowers, valve actuators), LED lighting control, sensor interface boards, low-cost consumer appliances, and general-purpose embedded control. The combination of compact 8-pin packaging and rich peripheral integration makes it well suited for space-constrained designs. A key design consideration is the exposed pad on the VDFN package, which must be soldered to the PCB ground plane to meet the specified thermal performance. For applications requiring more memory or peripherals, designers should evaluate the PIC12F1613 or PIC16F1614/1618 variants in larger pin-count packages. This page synthesizes distributor pricing, drop-in alternative cross-references, and practical PCB design notes for the PIC12F1612T-I/MF that are not consolidated on any single manufacturer or distributor page, providing actionable information for both design engineers and component buyers.

RFQ যোগাযোগ
PIC12F1822-E/MF - 8-Bit 32MHz XLP MCU 3.5KB Flash | Microchip
PIC12F1822-E/MF

PIC12F1822-E/MF - 8-Bit 32MHz XLP MCU 3.5KB Flash | Microchip

The Microchip PIC12F1822-E/MF is an 8-bit PIC microcontroller from the PIC12F family built on Microchip's enhanced mid-range core, featuring 3.5KB (2K x 14) of Flash program memory, 128 bytes of SRAM, and 256 bytes of EEPROM, packaged in an 8-pin DFN (3x3 mm) industrial-grade enclosure. It operates from 1.8V to 5.5V supply, runs at up to 32 MHz internal oscillator, and integrates nanoWatt XLP (eXtreme Low Power) technology that drops quiescent current to roughly 20 nA in sleep mode. An 8-bit microcontroller (MCU) is a small single-chip computer built around an 8-bit data path; it is the simplest member of the microcontroller hierarchy, sitting below 16-bit MCUs, 32-bit ARM Cortex-M MCUs, and microprocessors. The PIC12F1822 belongs to Microchip's 8-bit PIC microcontroller family, which uses a RISC Harvard architecture and is widely deployed in low-cost, low-power embedded control tasks. Within the broader taxonomy: PIC12F -> PIC10/12/16 family -> 8-bit MCU -> microcontroller -> embedded processor -> semiconductor. Key features include six I/O pins, an integrated 32 MHz internal oscillator with 4x PLL option, 10-bit ADC with up to 8 channels, multiple PWM and enhanced PWM modules, an EUSART, an MSSP (I2C/SPI) module, and an on-chip temperature indicator. The device offers configurable internal pull-ups, interrupt-on-change pins, and a watchdog timer for safety-critical applications. Peripherals are individually enabled via the PMD (Peripheral Module Disable) registers to minimize dynamic power consumption. The PIC12F1822 is implemented in a low-power CMOS process, with supply current scaling linearly with clock speed. The architecture supports 49 instructions, a 16-level hardware stack with overflow/underflow reset, and direct/indirect/relative addressing modes. In-circuit debugging is available via the ICSP interface using PICkit 3, MPLAB ICD 3, or the optional AC244043/AC244044 headers, removing the need for an external debug header. Typical applications include battery-powered sensor nodes, low-end remote controls, LED lighting controllers, energy-harvesting devices, household appliances, and portable medical accessories. The combination of tiny DFN-8 footprint and nanoWatt XLP sleep currents makes it especially attractive for coin-cell and energy-harvesting designs. Designers should choose this part when a sub-$1 MCU with deep-sleep current below 50 nA, 6 usable I/O lines, and a 3x3 mm PCB footprint is needed. Note that the Extended (E) temperature grade spans -40C to +125C, so for cost-sensitive commercial-only designs the -I/MF variant can be considered instead. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone. It is intended as a technical reference complementing the Microchip PIC12F1822 datasheet (DS40001413G).

RFQ যোগাযোগ
PIC12F1822-E/P - 8-bit MCU, 3.5KB Flash, 32MHz, 8-PDIP | Microchip
PIC12F1822-E/P

PIC12F1822-E/P - 8-bit MCU, 3.5KB Flash, 32MHz, 8-PDIP | Microchip

The Microchip Technology PIC12F1822-E/P is an 8-bit RISC microcontroller from the PIC12F family featuring 3.5 KB of FLASH program memory, 128 bytes of RAM, and 256 bytes of EEPROM, housed in an 8-pin PDIP (through-hole) package. The device operates from 1.8 V to 5.5 V (per the family datasheet) and runs at up to 32 MHz internal oscillator speed, delivering 49 instructions with a 16-level hardware stack and 8-bit data path. An 8-bit microcontroller (MCU) is a single-chip computer with an 8-bit data bus, integrating a CPU, non-volatile program storage (FLASH/ROM), working memory (RAM), and peripherals. The PIC12F1822 belongs to the PIC12F sub-family -> PIC10/12/16 family -> PIC microcontrollers -> 8-bit microcontrollers -> microcontroller (MCU) -> embedded processor -> integrated circuit hierarchy. It is specifically engineered for low-pin-count, ultra-low-power applications using Microchip's nanoWatt XLP technology, which can reduce sleep current to ~20 nA. Key features include 6 bidirectional I/O pins, four 10-bit ADC channels (shared with I/O), one 5-bit DAC, two comparators, five timers, capture/compare/PWM modules, EUSART, MSSP (I2C/SPI), and integrated ICD (in-circuit debug) support. The 32 MHz internal oscillator provides 8 MIPS throughput. Brown-out Reset (BOR), Power-On Reset (POR), and Watchdog Timer (WDT) provide embedded robustness. Compared to the older PIC12F615/PIC12F508, the PIC12F1822 adds a richer peripheral set and CIP (Core Independent Peripherals). Typical applications include battery-powered sensor nodes, LED control, consumer appliance user-interface boards, and low-cost logic-replacement modules where size and power are critical. The integrated CIP peripherals (e.g., PWM, ADC, comparator) let designers replace discrete analog blocks with deterministic on-chip silicon, reducing BOM cost. When designing with this part, place a 100 nF decoupling capacitor as close to VDD as possible and respect the ICD signal-pin layout (PGC/PGD on RA0/RA1) to enable in-circuit debug via PICkit 3 or MPLAB Snap. The device supports the ICSP programming interface through the same pins. This page synthesizes verified distributor pricing, drop-in compatible alternatives (same 8-pin PDIP footprint), and practical design notes that augment the manufacturer datasheet.

RFQ যোগাযোগ
PIC12F1822-I/SN - 8-Bit XLP MCU, 3.5KB Flash, 32MHz | Microchip
PIC12F1822-I/SN

PIC12F1822-I/SN - 8-Bit XLP MCU, 3.5KB Flash, 32MHz | Microchip

The Microchip Technology PIC12F1822-I/SN is an 8-bit PIC® XLP™ microcontroller featuring a 32MHz internal oscillator, 3.5KB (2K x 14 words) of Flash program memory, 128 bytes of RAM, and 256 bytes of EEPROM, housed in an 8-pin SOIC (SN) package. It belongs to the enhanced mid-range PIC12 family and integrates six general-purpose I/O pins plus one input-only pin, making it suitable for compact, low-pin-count designs. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, program memory (Flash/ROM), data memory (RAM), non-volatile storage (EEPROM), and peripheral interfaces onto one silicon die. The PIC12F1822 uses Microchip's RISC-based PIC architecture with 200 ns instruction execution, a single-cycle oscillator, and nanoWatt XLP technology. Within the product hierarchy, this places it as: 8-bit MCU -> microcontroller -> embedded processor -> semiconductor. The XLP nanoWatt feature set enables ultra-low sleep currents below 50 nA typical, which is critical for battery-powered applications. Key features include 6 I/O pins with individual direction control, an internal 32MHz oscillator (selectable from 31kHz to 32MHz via software), a 10-bit ADC with up to 8 channels, two 8-bit timers plus one 16-bit timer, enhanced PWM modules (ECCP + CCP), hardware USART, I2C, and SPI peripherals, and an integrated temperature indicator. It also supports capacitive-touch sensing via the mTouch™ peripheral and includes an on-chip debug interface. Typical applications include battery-powered sensor nodes, IoT end devices, LED lighting controllers, consumer appliance user-interface controllers, smart-home sensor hubs, and hobbyist/Maker projects using the Curiosity development board. Designers benefit from in-circuit serial programming (ICSP) for low-voltage programming and debug without a separate header. When designing with this part, ensure VDD decoupling with 100nF ceramic capacitors close to the supply pin. For ICSP, dedicate pins to ICSPCLK and ICSPDAT, and avoid placing large capacitors on those lines. The wide 1.8V-5.5V operating range allows direct Li-ion battery operation.

RFQ যোগাযোগ
PIC12F1822T-E/MF - 8-bit MCU, 3.5KB Flash, 32MHz, DFN-8
PIC12F1822T-E/MF

PIC12F1822T-E/MF - 8-bit MCU, 3.5KB Flash, 32MHz, DFN-8

The Microchip Technology PIC12F1822T-E/MF is an 8-bit enhanced mid-range PIC12 microcontroller built on nanoWatt XLP (eXtreme Low Power) technology, delivering 32 MHz performance from a 3.5 KB Flash program memory and 128 B SRAM in an 8-pin DFN-EP package on tape-and-reel. According to the Microchip product family brief, the PIC12F1822 family integrates a precision 32 MHz internal oscillator, 10-bit ADC with computation (ADC2), up to four PWM modules, and configurable logic cells that replace simple external glue logic. What is an 8-bit PIC microcontroller? An 8-bit PIC microcontroller is a RISC-based CMOS microcomputer from Microchip Technology that executes one instruction per cycle (typically 200 ns at 20 MHz, 125 ns at 32 MHz) and is part of the broader microcontroller > microcomputer > embedded IC hierarchy. The PIC12 sub-family targets ultra-small pin-count (8-pin and 14-pin) applications where board space, low quiescent current, and integrated peripherals matter more than raw computational throughput. Key features of the PIC12F1822T-E/MF include 3.5 KB self-programmable Flash with 256 B EEPROM, 128 B RAM, six I/O pins plus one input-only pin, and a 32 MHz internal oscillator accurate to within ±1% across voltage and temperature. Peripherals include a 10-bit ADC, two 8-bit timers and one 16-bit timer, enhanced USART, MSSP (SPI/I2C), up to four 10-bit PWM outputs with complementary and dead-band control, and configurable logic cells (CLC) that implement combinational/sequential logic in hardware. The architecture uses a 14-bit instruction word with an 8-level hardware stack, 32-byte access bank for fast SFR access, and a vectored interrupt controller with context save-on-entry. The XLP technology delivers typical sleep currents below 20 nA at 1.8 V, watchdog timer currents around 400 nA, and active currents around 50 µA/MIPS at 1 MHz / 1.8 V, making the part attractive for battery-powered and energy-harvesting designs. Typical applications include automotive sensor interfaces (the -E suffix denotes -40°C to +125°C automotive temperature grade), low-power IoT sensor nodes, LED lighting controllers, consumer appliance user interfaces, and small motor-control loops using the integrated PWM and CLC blocks. The wide 1.8 V to 5.5 V operating range allows direct connection to 2-cell battery stacks or 5 V rails without external level shifting. When designing with the PIC12F1822T-E/MF, leverage the integrated 32 MHz oscillator to avoid external crystals, reserve one I/O for ICSP programming, and place a 0.1 µF decoupling capacitor within 5 mm of the VDD pin. The DFN-EP exposed pad must be soldered to a thermal pad on the PCB for proper thermal dissipation. This page synthesizes distributor pricing, drop-in alternatives from the PIC12 family, and practical design notes not found in the manufacturer datasheet.

RFQ যোগাযোগ
PIC12F1822T-I/MF - 8-bit 32MHz 3.5KB Flash MCU | Microchip
PIC12F1822T-I/MF

PIC12F1822T-I/MF - 8-bit 32MHz 3.5KB Flash MCU | Microchip

The Microchip PIC12F1822T-I/MF is an 8-bit PIC microcontroller from the PIC12 enhanced mid-range lineup, featuring 3.5KB (2K x 14) of Flash program memory, 128 bytes of RAM, and 256 bytes of EEPROM in a compact 8-pin DFN (3x3 mm) package. It executes instructions at 200 ns (5 MIPS at 32 MHz) while supporting a wide 1.8V to 5.5V operating voltage range and consuming as little as 20 nA in sleep mode, making it one of Microchip's nanoWatt XLP eXtreme Low-Power family members. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O onto one silicon die. The PIC family falls under the broader hierarchy: 8-bit microcontroller -> microcontroller -> embedded processor -> semiconductor. MCUs run firmware stored in non-volatile memory and target deterministic real-time control tasks, in contrast to microprocessors that require external memory and run operating systems. The PIC12 sub-family targets low-pin-count, cost-sensitive, battery-powered designs where smallest PCB footprint and lowest quiescent current are critical. Key features include an integrated 32 MHz internal oscillator (no external crystal required), 6 I/O pins, four 10-bit ADC channels, two PWM modules, three timers, an Enhanced Universal Synchronous Asynchronous Receiver Transmitter (EUSART), and an MSSP module supporting SPI and I2C. The on-chip debugger and ICSP programming interface eliminate external debug headers on basic designs, and a Peripheral Pin Select (PPS) remaps digital peripherals to any I/O pin. The PIC12F1822 architecture uses a 14-bit instruction word RISC core with a hardware stack and 32-level deep interrupt priority, enabling deterministic interrupt response. Internal voltage reference, comparators, and a configurable logic cell (CLC) allow analog signal conditioning without external components, while nanoWatt XLP technology provides multiple low-power modes (sleep, dozing, peripheral module disable) for energy harvesting and coin-cell applications. Typical applications include IoT sensor nodes, battery-powered remote controls, wearable health monitors, LED lighting controllers, low-end motor control (small DC fans and BLDC drivers), white goods user-interface boards, and consumer peripherals. Industrial uses include 4-20 mA loop-powered sensor transmitters, HVAC damper actuators, and small appliance control boards. When designing with this device, derate the maximum clock frequency linearly below 2.3V to 16 MHz. Place a 0.1 uF decoupling capacitor within 3 mm of VDD and a 10 uF bulk capacitor near the package. Avoid using the ICSP pins as high-current outputs because the in-circuit debugger shares those pads. This page consolidates distributor pricing, drop-in same-package alternatives, application circuits, and design notes that complement the manufacturer datasheet.

RFQ যোগাযোগ
PIC12F1822T-I/RF - 8-Bit MCU, 3.5KB Flash, 32MHz, 8-UDFN | Microchip
PIC12F1822T-I/RF

PIC12F1822T-I/RF - 8-Bit MCU, 3.5KB Flash, 32MHz, 8-UDFN | Microchip

The Microchip PIC12F1822T-I/RF is a nanoWatt XLP 8-bit PIC microcontroller based on the Enhanced Mid-Range core, offering 3.5KB Flash program memory (2K x 14), 128 bytes of SRAM, and 256 bytes of Data EEPROM in an 8-pin UDFN (3x3x0.5mm) surface-mount package. It operates across 1.8V to 5.5V with internal 32MHz oscillator support, integrates 6 I/O pins, and targets AEC-Q100 automotive-grade applications with an industrial -40C to +85C temperature range. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash/ROM), working memory (RAM), non-volatile data storage (EEPROM), and programmable I/O peripherals. PIC microcontrollers from Microchip use a RISC Harvard architecture with separate program and data buses, providing deterministic single-cycle instruction execution. The 8-bit PIC12F family is positioned for cost-sensitive, space-constrained embedded designs that require low power consumption and minimal pin count, and sits within the broader semiconductor hierarchy of microcontrollers, embedded processors, and integrated circuits. Key features include nanoWatt XLP technology for ultra-low-power sleep modes (down to sub-microamp quiescent currents), an internal 32MHz high-speed oscillator selectable via configuration bits, an on-board 10-bit ADC with computation, and multiple communication peripherals including EUSART, MSSP (SPI/I2C), and PWM modules. The device also integrates a configurable logic cell (CLC), Complementary Waveform Generator (CWG), and Numerically Controlled Oscillator (NCO) for flexible signal generation without external components. Typical applications include battery-powered IoT sensor nodes, automotive body and lighting controllers, white-goods user interfaces, low-cost motor control, and consumer remote controls. The 8-UDFN package footprint of 3x3mm is one of the smallest available for PIC MCUs, enabling dense PCB layouts in wearables and space-constrained modules. When designing with the PIC12F1822T-I/RF, prioritize decoupling capacitor placement near the VDD pin and use the MPLAB X IDE with the XC8 compiler for firmware development. The integrated debug logic via ICSP allows in-circuit programming without a debug header, reducing BOM cost for prototype to production transition. Ensure configuration bits are properly set for the desired oscillator source before code deployment.

RFQ যোগাযোগ
PIC12F1840-E/MF - 8-bit 32MHz 7KB Flash MCU 8-DFN | Microchip
PIC12F1840-E/MF

PIC12F1840-E/MF - 8-bit 32MHz 7KB Flash MCU 8-DFN | Microchip

The Microchip Technology PIC12F1840-E/MF is an 8-bit PIC® XLP™ flash microcontroller delivering 32 MHz CPU performance with 7 KB (4K x 14) of program Flash and 256 bytes of EEPROM, housed in an 8-pin DFN (3x3 mm) surface-mount package. The part integrates six general-purpose I/O pins, an internal 32 MHz oscillator, multiple serial communication peripherals including I²C, SPI, and EUSART, plus a 10-bit ADC and PWM/timer/capture modules, all on a single CMOS die designed for nanoWatt XLP low-power operation. The operating voltage range spans 1.8 V to 5.5 V with extended (-40 °C to +125 °C) industrial temperature grade, enabling battery-powered and harsh-environment designs. A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory (Flash/ROM), volatile data memory (RAM), non-volatile data memory (EEPROM), and configurable peripheral blocks such as timers, ADCs, and communication controllers. Within the broader hierarchy of semiconductor devices, an MCU sits under microcontrollers -> microcomputer ICs -> integrated circuits. The PIC12F1840 belongs to Microchip's enhanced mid-range 8-bit PIC12 family, which traces its lineage back to the original Harvard-architecture PIC® RISC cores and is the smallest-footprint 8-bit MCU family Microchip ships in production. Key features include 7 KB self-programmable Flash, 256-byte EEPROM, 256-byte SRAM, six I/O pins, four 10-bit PWM outputs, four 10-bit ADC channels, a comparator module, and nanoWatt XLP sleep currents as low as 20 nA typical, with an active current of approximately 1.8 mA at 4 MHz / 2 V. Core-independent peripherals such as the Configurable Logic Cell (CLC), Numerically Controlled Oscillator (NCO), and Complementary Waveform Generator (CWG) offload timing-critical tasks from the CPU, allowing continued peripheral operation in sleep mode. The integrated 32 MHz internal oscillator eliminates the need for an external resonator in space-constrained designs. Typical applications include battery-powered IoT sensor nodes, portable consumer devices, LED lighting controllers, low-cost motor control, and remote/wireless control transmitters. The wide 1.8 V-5.5 V operating range and nanoWatt XLP sleep performance make it especially suitable for energy-harvesting and coin-cell applications where quiescent current is critical. When designing with this device, allocate the six I/O pins carefully because three are shared with the ICSP programming interface, leaving only three usable for application I/O if ICSP is retained in-circuit. Place a 100 nF decoupling capacitor within 5 mm of the VDD pin and reserve the exposed pad (DFN package) for proper thermal dissipation and ground return. The internal 32 MHz oscillator is factory calibrated to ±2% typical, so designs that need precise UART baud rates over temperature should use the PLL or external crystal options. This page synthesizes distributor stock and pricing, drop-in package-equivalent alternatives, and practical design notes that are not consolidated in the manufacturer datasheet alone, helping procurement and design engineers evaluate the PIC12F1840-E/MF against pin-compatible options in the Microchip PIC10/PIC12/PIC16 families.

RFQ যোগাযোগ
PIC12F1840-E/P - 8-bit MCU, 7KB Flash, nanoWatt XLP DIP-8
PIC12F1840-E/P

PIC12F1840-E/P - 8-bit MCU, 7KB Flash, nanoWatt XLP DIP-8

The Microchip Technology PIC12F1840-E/P is an 8-bit enhanced mid-range flash microcontroller featuring 7KB of Flash program memory, 256 bytes of EEPROM, and 256 bytes of RAM, all integrated into a 300-mil 8-pin PDIP (P) through-hole package. Operating from 1.8V to 5.5V with nanoWatt eXtreme Low Power (XLP) technology, it delivers active current as low as 50 µA/MHz at 3V and sleep currents down to 20 nA, making it ideal for battery-powered edge nodes. The core executes instructions in a single 200 ns cycle across a 49-instruction set with 16 stack levels. A PIC microcontroller is a compact, deterministic CMOS processor built on a Harvard RISC architecture with separate program and data buses, widely used in embedded designs that require low power, low cost, and small footprint. Within the broader taxonomy, the PIC12F1840 sits in the hierarchy: PIC microcontroller -> 8-bit MCU -> enhanced mid-range core -> flash MCU with XLP -> embedded controller. This positioning explains why the part is so common in consumer, IoT, and industrial sensor front-ends where deterministic interrupt latency and ultra-low standby current matter more than raw compute throughput. Key features include six I/O pins with independent weak pull-ups and interrupt-on-change, four 10-bit ADC channels, two 8-bit timers and one 16-bit timer, a Capture/Compare/PWM (CCP) module, an Enhanced Universal Synchronous/Asynchronous Receiver/Transmitter (EUSART), and an integrated configurable reference and temperature indicator. The device supports in-circuit serial programming (ICSP) and in-circuit debugging through PICkit 3, MPLAB ICD 3, or the MPLAB Snap programmer. Architecturally, the PIC12F1840 uses Microchip's enhanced mid-range core with a 14-bit instruction word and an internal 32 MHz oscillator, alongside an 8 MHz calibrated HFINTOSC factory-trimmed to ±1%. The internal oscillator eliminates external crystals in most designs and reduces BOM cost. The XLP family design minimizes dynamic and leakage power, allowing years of operation from a single coin cell. Typical applications include battery-backed sensor nodes, LED lighting controllers, low-power remote controls, simple motor drivers, and home automation peripherals. The combination of nanoWatt sleep modes and fast wake-up from interrupt makes the part well suited to event-driven IoT endpoints. When designing with this device, plan the I/O pinout carefully - only six of the eight pins are general-purpose because VDD, VSS, and ICSPCLK/ICSPDAT also share pins. Use MPLAB X IDE with XC8 compiler and reserve a pull-up on MCLR unless the internal MCLR is enabled. For low-power designs, configure unused peripherals to OFF and use the deep-sleep current of approximately 20 nA.

RFQ যোগাযোগ
PIC12F1840-E/SN - 8-bit 32MHz 7KB Flash MCU | Microchip | SOIC-8
PIC12F1840-E/SN

PIC12F1840-E/SN - 8-bit 32MHz 7KB Flash MCU | Microchip | SOIC-8

The Microchip Technology PIC12F1840-E/SN is an 8-bit PIC® microcontroller with nanoWatt XLP technology, featuring 7KB (4K x 14) FLASH program memory, 256 bytes RAM, and 256 bytes EEPROM in an 8-pin SOIC package. It operates up to 32MHz internal oscillator speed and runs from 2.5V to 5.5V supply. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and peripherals around an 8-bit data path. The PIC12F1840 belongs to the enhanced mid-range PIC12 family, which sits in the broader hierarchy: PIC12 -> PIC10/12/16/18 family -> 8-bit PIC microcontroller -> microcontroller -> embedded processor -> semiconductor. The 8-bit MCU category is widely used in cost-sensitive, low-power embedded designs where deterministic instruction execution and ultra-low standby current matter more than raw computational throughput. Key features include six I/O pins, an integrated 32MHz internal oscillator, 12-bit ADC with computation, multiple communication peripherals (I²C, SPI, EUSART), and Microchip's nanoWatt XLP energy-saving modes that allow standby current below 100nA typical. The 'E' temperature grade suffix denotes the Extended operating range of -40C to +125C, suitable for industrial and harsh-environment designs. Architecturally, the PIC12F1840 uses a RISC Harvard architecture with 49 instructions, 16-level hardware stack, and 200ns instruction execution at 20MHz. Its peripheral set includes enhanced PWM modules, configurable logic cells (CLC), numerically controlled oscillator (NCO), and complementary waveform generator (CWG), enabling flexible signal generation without external components. Typical applications include IoT sensor nodes, battery-powered remote controls, low-power wireless sensor interfaces, LED lighting controllers, home automation edge nodes, and portable medical accessories where low quiescent current extends battery life. When designing with this part, ensure MPLAB X IDE and XC8 compiler compatibility. Decoupling: place a 100nF ceramic capacitor within 5mm of VDD, with VSS star-grounded. The internal oscillator eliminates external crystals but can be calibrated via OSCTUNE for tight timing applications. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFQ যোগাযোগ
PIC12F1840-I/P - 8-bit 32MHz XLP MCU 7KB Flash | Microchip
PIC12F1840-I/P

PIC12F1840-I/P - 8-bit 32MHz XLP MCU 7KB Flash | Microchip

The Microchip Technology PIC12F1840-I/P is an 8-bit PIC microcontroller in the enhanced mid-range core family with 7KB (4K x 14) Flash program memory, 256 bytes of EEPROM, and 256 bytes of RAM, housed in an 8-pin PDIP through-hole package. It operates at up to 32 MHz internal clock speed from a 1.8V to 5.5V supply, delivering 49 instructions with 16-level hardware stack, interrupt context saving, and nanoWatt XLP extreme-low-power technology for battery-sensitive designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory, RAM, and programmable peripherals into one package. The PIC12F1840 belongs to the 8-bit PIC microcontroller family, itself a subfamily of microcontrollers within the broader integrated circuit and embedded systems taxonomy. Its XLP variants extend the family into ultra-low-power domains where quiescent current is measured in nanoamperes, making the PIC12F1840-I/P a hybrid of compact 8-pin form factor and modern low-power performance. Key features include six I/O pins multiplexed with peripherals such as a 10-bit ADC, two 8-bit timers, one 16-bit timer, Enhanced PWM, MSSP for SPI/I2C, EUSART, and configurable logic cells. The device supports internal 32 MHz oscillator, 31 kHz LFINTOSC, and PLL, eliminating external crystals in many designs. Core peripherals include a WWDT windowed watchdog, BOR/POR power management, in-circuit serial programming (ICSP), and code protection via Microchip's low-pin-count IP (US Patent 5,847,450). Architecturally, the PIC12F1840 uses a RISC Harvard CPU with separate program and data buses, single-cycle instruction execution at 32 MHz (125 ns instruction time), and 16-deep hardware stack. The flash memory is self-read/write capable, supporting live firmware updates and data EEPROM emulation. XLP technology provides sleep currents as low as 20 nA typical, with multiple power-managed operating modes (Run, Idle, Sleep) selectable in software. Typical applications include consumer remote controls, sensor node interfaces, battery-powered IoT edge devices, simple motor control loops, LED driving, and low-cost educational platforms. The 8-pin PDIP form factor is also widely used in retrofits for legacy PIC12F675/PIC12F683 designs, since the PIC12F1840 offers a clean migration path with substantially more memory and peripherals. When designing with this device, ensure decoupling caps (100 nF + 10 uF bulk) are placed close to VDD/VDDCORE pins, MCLR is pulled up correctly for ICSP, and unused I/O pins are configured as outputs low to minimize current. For automotive or AEC-Q100 work, the PIC12F1840-I/P industrial grade operates from -40C to +85C, so consult the automotive grade separately if required. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFQ যোগাযোগ
PIC12F1840-I/SN - 8-bit XLP MCU 32MHz 7KB Flash SOIC-8 | Microchip
PIC12F1840-I/SN

PIC12F1840-I/SN - 8-bit XLP MCU 32MHz 7KB Flash SOIC-8 | Microchip

The Microchip Technology PIC12F1840-I/SN is an 8-bit Flash microcontroller from the PIC XLP 12F family, offering a 32 MHz internal oscillator, 7 KB (4K x 14) Flash program memory, 256 bytes of EEPROM, and 256 bytes of SRAM in an 8-pin SOIC package. It runs from 2.5 V to 5.5 V with industry-leading nanoWatt XLP sleep currents below 20 nA in deep sleep. A microcontroller (MCU) is a single-chip computer containing a CPU core, program and data memory, programmable I/O peripherals, and communication interfaces. The PIC12F1840 uses an Enhanced Mid-Range 8-bit core with 49 instructions and a 16-level hardware stack, sitting in the taxonomy chain microcontroller -> embedded controller -> semiconductor IC. It is designed for low-pin-count, battery-powered, and always-on applications. Key features include an internal 32 MHz oscillator, four 10-bit ADC channels, a configurable mTouch capacitive sensing module, a Data Signal Modulator (DSM), an EUSART with auto-baud, an MI2C/SPI interface, a 25 mA source/sink I/O, and a comparator with selectable voltage reference. The integrated ECCP (Enhanced Capture/Compare/PWM) module supports half-bridge, full-bridge, and PWM steering topologies for lighting and motor control. The 8-pin SOIC (SN) package makes the PIC12F1840-I/SN an ideal drop-in upgrade for legacy PIC12F675 designs that need more memory, more peripherals, and lower sleep current. PIC XLP nanoWatt technology combined with active clock tuning and ultra-low-power wake-up sources enables multi-year coin-cell operation in remote sensor nodes. Typical applications include consumer appliances, IoT end nodes, LED lighting controllers, capacitive touch user interfaces, sensor conditioning, and remote controls. The wide operating range (industrial -40 °C to +85 °C) and rich peripheral set make it a strong fit for space-constrained mixed-signal designs. When designing with the PIC12F1840, ensure decoupling capacitors of 0.1 µF are placed within 5 mm of VDD, and that unused I/O are configured as outputs to minimize sleep current. Programming is supported by the free MPLAB X IDE and Xpress, PICkit, or Curiosity programmers - a key advantage over cross-brand 8-bit alternatives that often lack a unified, free toolchain. This page synthesizes drop-in alternatives, package-matched cross-references, and practical design notes that complement, but do not replace, the manufacturer datasheet.

RFQ যোগাযোগ
PIC12F1840T-I/RF - 8-bit 32MHz XLP MCU 7KB Flash | Microchip
PIC12F1840T-I/RF

PIC12F1840T-I/RF - 8-bit 32MHz XLP MCU 7KB Flash | Microchip

The Microchip PIC12F1840T-I/RF is an 8-bit Flash microcontroller based on the enhanced mid-range PIC® core with XLP (eXtreme Low Power) technology, delivered in an 8-pin UDFN (3x3 mm) package with exposed pad. It integrates 7 KB of Flash program memory, 256 bytes of RAM, and 256 bytes of EEPROM data memory, and runs at up to 32 MHz internal oscillator speed from a 1.8V to 5.5V supply. A microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory, working RAM, and peripheral interfaces such as timers, ADC, communications, and I/O. PIC12-series parts are 8-bit Harvard-architecture devices in the broader microcontroller taxonomy: MCU -> 8-bit MCU -> PIC microcontroller -> PIC12 family -> enhanced mid-range core. Their 49-instruction, 16-level hardware stack RISC engine enables deterministic interrupt response in real-time control loops. Key features include a 4-channel 10-bit ADC with internal voltage reference, one enhanced capture/compare/PWM (ECCP) module, one MI2C/SPI/EUSART with auto-baud peripheral, two comparators with selectable references, an integrated mTouch capacitive sensing module, a data signal modulator (DSM), and 25 mA source/sink I/O for direct LED drive. XLP technology supports nanoWatt sleep currents below 100 nA typical, which is essential for battery-powered sensor nodes. The architecture uses a 14-bit instruction word with an 8-bit data path, a 16-level hardware stack, and self-read/write Flash. The integrated 32 MHz high-precision internal oscillator eliminates the need for an external crystal on cost-sensitive boards and reduces the BOM. The exposed thermal pad on the UDFN package provides a low thermal resistance path for higher-current I/O switching. Typical applications include IoT sensor nodes, wearable health devices, low-power remote controls, LED lighting controllers, capacitive touch user interfaces, and battery-backed security/keypad modules. The combination of a 10-bit ADC, ECCP PWM, and EUSART with auto-baud also suits brushed-DC fan control and simple BLDC commutation logic. When designing with the PIC12F1840, leave the exposed pad (EP) soldered to the ground plane for thermal dissipation and supply decoupling. Always decouple VDD with a 0.1 uF ceramic close to the pin and place the ICSP programming pins (ICSPCLK/ICSPDAT) on dedicated test points or a 6-pin header to enable in-circuit debugging with the MPLAB Snap or PICkit. This page synthesizes distributor pricing from Mouser/DigiKey, drop-in same-package alternatives, and practical design notes that are not found in the standalone manufacturer datasheet. All data is sourced from verified distributor pages and Microchip's official PIC12F1840 datasheet.

RFQ যোগাযোগ
PIC12F508-E/MC - 8-bit 4MHz Flash MCU, 768B, 8-DFN | Microchip
PIC12F508-E/MC

PIC12F508-E/MC - 8-bit 4MHz Flash MCU, 768B, 8-DFN | Microchip

The Microchip Technology PIC12F508-E/MC is a low-cost, high-performance, 8-bit, fully-static, Flash-based CMOS microcontroller in an 8-pin DFN (2x3 mm) exposed-pad package. It features 768 bytes (512 x 12 words) of Flash program memory, 25 bytes of RAM, and 5 general-purpose I/O pins, with an internal 4 MHz oscillator. The PIC12F508-E/MC is part of the PIC12F508/509/16F505 family, one of the smallest and lowest-cost 8-bit Flash MCUs in Microchip's midrange portfolio. An 8-bit microcontroller (MCU) is a self-contained computer-on-a-chip integrating an 8-bit CPU, program memory, RAM, and peripherals. It belongs to the microcontroller family, which itself sits within embedded processors, embedded computing, and finally the broader category of integrated circuits. The PIC12F508-E/MC uses a RISC-like Harvard architecture with only 33 single-word/12-bit instructions, achieving typical 2:1 code compression over competitive 8-bit MCUs and enabling dense firmware in tiny program-memory footprints. Key features include 4 MHz internal oscillator accuracy, 2.0V to 5.5V wide operating voltage, in-circuit serial programming (ICSP), a watchdog timer with on-chip RC oscillator, power-on reset, power-saving Sleep mode, and an 8-bit real-time timer/counter (TMR0). The 8-DFN exposed-pad package provides a low thermal-resistance path, suitable for compact, thermally-constrained consumer and industrial designs. The -E suffix designates the Extended (industrial) temperature range of -40C to +125C. Architecturally, the PIC12F508-E/MC uses a two-stage pipeline with single-cycle instruction execution except for program branches, and a 12-bit-wide instruction word that delivers compact code density. The internal 4 MHz RC oscillator eliminates the need for an external crystal, reducing BOM cost and PCB area. Compared to PIC10F-series 6-pin MCUs, the PIC12F508 adds 2 extra I/O lines, more program memory, and the timer/counter peripheral, while remaining in a similar price bracket. Typical applications include low-cost consumer appliances, LED lighting controllers, battery chargers, simple sensor interfaces, toys, and remote-control transmitters. Designers also use the PIC12F508-E/MC as a "smart" replacement for discrete logic or analog timer circuits, consolidating glue logic and timing functions into a single reprogrammable device. The 8-pin DFN footprint is ideal where board space is at a premium. When designing with this device, note the lack of an analog-to-digital converter (ADC) and on-chip debug interface - engineers requiring these features should consider the PIC12F1572 or PIC12F1822 family. For new designs, Microchip recommends the PIC16F15313 as a newer pin-compatible successor with enhanced peripherals.

RFQ যোগাযোগ
PIC12F508-E/MS - 8-Bit 4MHz MCU 768B Flash MSOP | Microchip
PIC12F508-E/MS

PIC12F508-E/MS - 8-Bit 4MHz MCU 768B Flash MSOP | Microchip

The Microchip Technology PIC12F508-E/MS is an 8-bit Flash microcontroller built on a RISC architecture, delivering 4 MIPS of performance at 4 MHz from 768 bytes of program memory, housed in an 8-pin MSOP package. According to the Microchip PIC12F508/509/16F505 datasheet, the device integrates 25 bytes of RAM, 6 I/O pins, and a precision 4 MHz internal oscillator, all in a compact 3.00 mm MSOP outline. What is a PIC12-series 8-bit microcontroller? The PIC12F family sits at the entry level of Microchip's PIC microcontroller hierarchy, positioned below PIC16 and PIC18 in code complexity but offering exceptional cost-effectiveness for simple control tasks. As a Flash-based, fully static CMOS MCU, the PIC12F508 belongs to the broader category of embedded microcontrollers -> microcontrollers -> embedded processors -> semiconductors, and is widely used where deterministic, low-power control replaces discrete logic or analog circuitry. Key features include a 33-instruction set with 12-bit-wide opcodes that achieve typical 2:1 code compression versus competing 8-bit MCUs in its class, an extended operating temperature range of -40C to +125C (E suffix), and a wide 2.0 V to 5.5 V supply range. The device supports in-circuit serial programming (ICSP), enabling firmware updates after PCB assembly without requiring a pre-programmed part. Six general-purpose I/O pins can be configured for digital I/O, weak pull-ups, or analog comparator inputs, providing flexibility for mixed-signal designs. At the architectural level, the PIC12F508 uses a Harvard architecture with separate program and data buses, eliminating the bottleneck of unified memory access. Its single-cycle instruction execution allows deterministic timing for real-time control loops, and the 4 MHz internal oscillator eliminates external crystal components, reducing both BOM cost and PCB footprint. Typical applications include consumer appliance control, battery-powered sensor interfaces, LED lighting controllers, simple fan or motor drivers, and low-cost replacement of discrete logic. The wide temperature range and small MSOP-8 package suit it especially for space-constrained industrial or automotive subsystem nodes. When designing with this device, note that the 768-byte program memory limits firmware to roughly 500-600 instructions; designers targeting complex protocols should evaluate PIC12F1822 or PIC12F1840. The ICSP pins (GP0/GP1) must be accessible in the final PCB layout for in-field firmware updates. This page synthesizes distributor pricing, drop-in alternatives within the PIC12 family, and practical design notes that complement, but do not replace, the official Microchip datasheet (DS41236E).

RFQ যোগাযোগ
PIC12F508-E/P - 4MHz 8-Bit Flash MCU | Microchip
PIC12F508-E/P

PIC12F508-E/P - 4MHz 8-Bit Flash MCU | Microchip

The Microchip Technology PIC12F508-E/P is a low-cost 8-bit, fully static, Flash-based CMOS microcontroller with a 4 MHz maximum clock, 768 bytes of program memory, 25 bytes of RAM, and five I/O pins in an 8-pin PDIP package. It combines a compact RISC-style architecture with 12-bit-wide instructions and internal oscillator support for cost-sensitive embedded control. A microcontroller is a programmable semiconductor that integrates a CPU core, memory, I/O, timers, and reset functions on one device. The PIC12F508 belongs to the 8-bit PIC microcontroller family and provides a direct path from firmware to embedded logic, allowing designers to replace several discrete components with a small, deterministic control system. Its 12-bit instruction word is highly symmetrical and typically provides approximately 2:1 code compression compared with other 8-bit microcontrollers in its class. The verified product data identifies 768 bytes of program memory organized as 512 by 12 bits, 25 bytes of eight-bit RAM, five I/O pins, and a 4 MHz operating speed. The device is supplied in an 8-pin PDIP package with a 0.300-inch, 7.62 mm body format. The -E designation identifies the specified extended-temperature grade, while /P identifies the PDIP package variant. PIC12F508-E/P is suitable for compact control products, simple timers, digital logic controllers, sensor interfaces, LED sequencing, and low-power embedded systems. Its small package and limited memory footprint suit applications where board area and simplicity matter more than high peripheral integration. Firmware should account for the small program-memory capacity and use the device’s GPIO and timing resources efficiently. The internal oscillator and Flash programmability support compact, repeatable designs. Designers should verify configuration settings, oscillator behavior, I/O direction, reset assumptions, and timing requirements against the Microchip manufacturer datasheet before production release. The supplied verified sources identify the device as an 8-bit, 4 MHz, 768-byte Flash MCU with 25 bytes of RAM and five I/O pins. This page combines the verified Microchip and distributor specifications with design guidance, application context, comparison fields, sourcing information, and explicit data gaps. It is intended to help engineers evaluate PIC12F508-E/P for small embedded-control designs while avoiding unsupported assumptions about parameters not present in the retrieved source data.

RFQ যোগাযোগ
PIC12F508-E/SN - 8-Bit 4MHz Flash MCU, 768B, 6 I/O | Microchip
PIC12F508-E/SN

PIC12F508-E/SN - 8-Bit 4MHz Flash MCU, 768B, 6 I/O | Microchip

The Microchip Technology PIC12F508-E/SN is an 8-bit, 4MHz, Flash-based CMOS microcontroller in the PIC12F family, housed in an 8-pin SOIC (SN) package. It integrates 768 bytes (512 x 12) of program Flash memory, 25 bytes of RAM, and 6 configurable I/O pins, providing a compact low-cost compute platform for simple embedded applications. The device operates from 2.0V to 5.5V across the extended industrial temperature range (-40C to +125C) and is specified for automotive-grade process capability. What is an 8-bit Flash microcontroller? An 8-bit Flash microcontroller is a single-chip computer built around an 8-bit data path, with program memory implemented in non-volatile Flash (rather than ROM, EPROM, or one-time programmable memory). This category sits inside the broader microcontroller hierarchy (microcontroller -> embedded processor -> semiconductor) and is widely used in cost- and pin-sensitive designs where 32-bit performance is not required. Key features of the PIC12F508-E/SN include a RISC instruction set with only 33 single-word instructions, an internal 4MHz RC oscillator (no external crystal needed), an 8-bit timer with prescaler, a watchdog timer, and in-circuit serial programming (ICSP) via two pins. With only 8 pins total, 6 of which are available as I/O, the part is designed for ultra-compact PCB designs such as single-chip sensor interfaces, small appliances, and simple logic-replacement modules. The PIC12F508-E/SN uses a Harvard-architecture core with separate program and data buses, a 2-stage pipeline, and 12-bit-wide instructions. According to the manufacturer datasheet, this delivers typical 2:1 code compression over competing 8-bit MCUs in the same price class. The device consumes very low operating current and supports power-saving modes, making it suitable for battery-powered applications. Typical applications include LED blinkers and lighting controllers, battery chargers, sensor signal conditioning, simple motor control (small fans, solenoids), remote-control transmitter logic replacement, and automotive courtesy / interior lamps. The wide 2.0V-5.5V supply range supports both 3.3V and 5V rails commonly found in legacy industrial systems. When designing with this part, allocate two pins to ICSP (VDD/GND-style dual-purpose programming pins) to preserve in-circuit debug capability. Choose an external reset strategy carefully - the device offers optional internal weak pull-ups but no full brown-out reset on all variants. This page synthesizes distributor pricing, drop-in alternatives from Microchip's PIC12F family, and practical design notes not found in the manufacturer datasheet.

RFQ যোগাযোগ
PIC12F508-I/MC - 8-bit Flash MCU, 4MHz, 768B Flash | Microchip
PIC12F508-I/MC

PIC12F508-I/MC - 8-bit Flash MCU, 4MHz, 768B Flash | Microchip

The Microchip Technology PIC12F508-I/MC is an 8-bit Flash-based CMOS microcontroller delivering 4 MIPS performance at 4 MHz, packaged in an 8-pin DFN (2x3 mm) form factor. It integrates 768 bytes of Flash program memory (512 x 12 words), 25 bytes of RAM, and 6 general-purpose digital I/O pins, making it one of the smallest and lowest-cost members of the Microchip PIC12F family. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory, working RAM, and programmable I/O peripherals on a single die, executing instructions fetched from on-chip Flash. The PIC12F508 belongs to the baseline PIC12 architecture, which uses 12-bit-wide instructions and offers typical 2:1 code compression over competing 8-bit MCUs in its class. In the broader taxonomy, this device sits at: microcontroller -> embedded microcontroller -> 8-bit MCU -> baseline PIC -> PIC12F family. It targets cost-sensitive applications where deterministic timing, low pin count, and minimal PCB footprint outweigh the need for large memory or analog peripherals. Key features include 4 MHz maximum oscillator frequency, 2.0V to 5.5V operating voltage range, 8-bit timer (TMR0) with 8-bit prescaler, watchdog timer with on-chip RC oscillator for reliable operation, in-circuit serial programming (ICSP) capability, and 6 bidirectional I/O pins with individual direction control. The device consumes only a few milliamps in active mode and drops to microamp-level currents in sleep, enabling battery-friendly designs. The DFN-8 (2x3 mm) package gives a thermal resistance of approximately 70 C/W and exposes a small thermal pad for board-level heat dissipation. Technically, the PIC12F508 uses a RISC Harvard-architecture CPU with 33 single-word instructions, allowing most instructions to execute in a single instruction cycle (1 us at 4 MHz). It supports internal 4 MHz RC oscillator calibration, an external clock input, or low-cost external RC timing. Reset sources include power-on reset (POR), brown-out detect, and watchdog wakeup from sleep. Code protection and ID locations support basic firmware IP security. Typical applications include LED blinkers and decorative lighting controllers, simple sensor interfaces, battery-powered remote controls, consumer appliance sub-controllers, smoke-detector front-ends, and general-purpose glue logic replacement. The wide 2.0V-5.5V supply range simplifies single-cell Li-ion or 3.3V system designs. When designing with this device, ensure ICSP connections (GP1/GP0) are accessible for field firmware updates and that decoupling capacitors are placed as close as possible to VDD. The PIC12F508 is widely supported by MPLAB X IDE, XC8 compiler, and the free MPLAB Xpress cloud toolchain, so engineers can prototype without hardware tool purchases. Note that Microchip recommends the newer PIC16F15313 as the migration path for new designs. This page synthesizes distributor pricing, same-package drop-in alternatives, application notes, and design notes not found in the manufacturer datasheet alone.

RFQ যোগাযোগ
PIC12F508-I/MS - 8-bit 4MHz Flash MCU 768B | Microchip
PIC12F508-I/MS

PIC12F508-I/MS - 8-bit 4MHz Flash MCU 768B | Microchip

The Microchip PIC12F508-I/MS is an 8-bit flash microcontroller from the PIC12 family, delivering 4 MIPS performance at 4 MHz from a 768-byte program memory (512 x 12 words) in an 8-pin MSOP package. The device operates from a wide 2.0V to 5.5V supply range and integrates 25 bytes of RAM with 6 general-purpose digital I/O pins in a compact DFN/MSOP footprint. An 8-bit microcontroller (MCU) is a single-chip computer that integrates an 8-bit data-path CPU, program memory, working RAM, and peripherals on one die. The PIC12F508 belongs to Microchip's baseline PIC10/12 architecture family, sitting within the broader hierarchy of microcontrollers -> embedded processors -> semiconductors -> integrated circuits. Baseline PIC devices use a 12-bit wide instruction set that yields roughly 2:1 code compression versus competing 8-bit cores, enabling more application logic in fewer bytes of flash. Key features include a hardware single-cycle multiplier-free ALU, internal 4 MHz RC oscillator calibrated to +/- 1 percent typical accuracy, watchdog timer with on-chip low-power RC oscillator, power-on reset, brown-out reset, and an in-circuit serial programming (ICSP) interface. The device sources/sinks up to 25 mA per I/O pin and supports industrial -40C to +85C operating temperatures. Architecturally the PIC12F508 uses a RISC-style Harvard design with separate program and data buses, a single accumulator (W register) plus a 32-byte register file, and a 2-stage pipeline. The flash memory supports in-circuit serial programming, allowing firmware to be updated on assembled boards without removing the device. A 4 MHz internal oscillator eliminates the external crystal typically required, reducing BOM cost and PCB area. Typical applications include LED lighting controllers, battery chargers, simple sensor signal conditioning, low-cost consumer appliances, and pin-compatible upgrades to legacy PIC12C508A designs. The compact MSOP-8 footprint makes it ideal for space-constrained designs. When designing with this MCU, allocate adequate decoupling (100 nF + 10 uF bulk) near the VDD pin. The ICSP pins (GP1/GP0) must be accessible for in-circuit programming; consider adding test points or a 2x3 header to the PCB. This page synthesizes verified distributor pricing, pin-compatible drop-in alternatives from Microchip and competitor equivalents, and practical design notes not found in a single source.

RFQ যোগাযোগ
PIC12F508-I/P - 8-bit Flash MCU, 4MHz, 768B Flash, 6 I/O | Microchip
PIC12F508-I/P

PIC12F508-I/P - 8-bit Flash MCU, 4MHz, 768B Flash, 6 I/O | Microchip

The Microchip Technology PIC12F508-I/P is an 8-bit flash microcontroller in the PIC12 family, delivering 4 MIPS performance at 4 MHz from a 768-byte flash program memory in an 8-pin PDIP through-hole package. The -I suffix denotes the industrial temperature grade (-40C to +85C), and the /P suffix denotes the PDIP-8 package. The PIC12F508 is part of Microchip's baseline PIC12F5xx series, designed for cost-sensitive applications requiring minimal pin count and low power consumption. An 8-bit microcontroller is a microprocessor core that processes data in 8-bit wide chunks, typically integrating CPU, RAM, program memory, and peripherals on a single die. Within the broader taxonomy, the PIC12F508 sits at: microcontroller -> 8-bit MCU -> baseline PIC12 family -> flash-programmed PIC12F5xx series -> semiconductor. Its 12-bit instruction word is one of Microchip's defining architectural choices, allowing 2:1 code compression versus typical 8-bit CISC competitors and enabling most instructions to execute in a single instruction cycle. Key features include 25 bytes of RAM, 6 bidirectional I/O pins with individually programmable weak pull-ups, an 8-bit timer (TMR0) with 8-bit programmable prescaler, a watchdog timer with on-chip RC oscillator, power-on reset, power-saving sleep mode, and an internal 4 MHz RC oscillator. The wide operating voltage range (2.0V to 5.5V) supports battery-powered and 5V regulated designs alike. In-circuit serial programming (ICSP) allows firmware updates without removing the device from the board. The PIC12F508 employs a RISC Harvard architecture with a 33-instruction set, only two of which are multi-cycle, and a 2-stage pipeline. The 12-bit instruction width enables efficient code density. An internal 4 MHz precision oscillator eliminates the need for an external crystal in cost-sensitive applications, while an external oscillator option remains for timing-critical uses. The CMOS process ensures low quiescent current in sleep mode, making the device suitable for battery-powered and energy-harvesting designs. Typical applications include low-cost consumer appliances, simple LED controllers, battery chargers, toys, remote controls, sensor signal conditioning, and replacement of discrete logic in glue applications. The 6 I/O pins support peripheral functions including one analog comparator, one 8-bit timer, and ICSP programming. When designing with this part, note that the /P package is through-hole PDIP-8 with 2.54 mm pitch, suited for prototyping and hobby projects. For surface-mount designs, the same silicon die is offered in SOIC-8 (PIC12F508-I/SN) and MSOP-8 (PIC12F508-I/MS) packages. Code-compatible siblings (PIC12F509 with 1.5 KB flash; PIC16F505 with 14 pins and 1.5 KB flash) extend the family for memory expansion. This page synthesizes real-time distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFQ যোগাযোগ