মাইক্রোকন্ট্রোলার

পণ্য (20,000+)

PIC12LCE673-04/P - 8-Bit 4MHz MCU 1.75KB OTP 8-PDIP | Microchip
PIC12LCE673-04/P

PIC12LCE673-04/P - 8-Bit 4MHz MCU 1.75KB OTP 8-PDIP | Microchip

The Microchip Technology PIC12LCE673-04/P is an 8-bit CMOS RISC microcontroller from the PIC® 12C family, featuring 4 MHz maximum clock speed, 1.75 KB (1K x 14) of One-Time-Programmable (OTP) program memory and 128 bytes of RAM, housed in a through-hole 8-pin PDIP package. The 'L' prefix designates the low-voltage variant (2.5V to 5.5V supply), making it one of the earliest microcontrollers to support true sub-3V operation from a single cell or two-battery stack. It exposes 6 general-purpose I/O pins and integrates analog and timing peripherals that allow complete system replacement of discrete logic in many applications. A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory, working RAM, and peripheral blocks. The PIC12C family uses a Harvard RISC architecture with 33 single-word instructions, delivering 1 µs instruction execution at 4 MHz. As part of the broader microcontroller category, PIC12C devices sit at the entry-level of Microchip's 8-bit portfolio above simpler 5xx parts and below the PIC16F mid-range series, occupying the 'low-pin-count, OTP-programmed, cost-optimised' niche. Key features include 8-bit real-time counter TMR0 with 8-bit programmable prescaler, Power-On Reset (POR), Device Reset Timer (DRT), Watchdog Timer (WDT) with dedicated on-chip RC oscillator, and selectable oscillator modes (RC, LP, XT, HS, INTOSC). The OTP EPROM provides one-time field programming suitable for production volumes where firmware is fixed and stable. Brown-out Reset and code protection are also supported for reliable field deployment. Internally, the PIC12LCE673-04/P employs a 14-bit instruction word with single-cycle execution except for program branches (two-cycle). The 8-level hardware stack and 7 special function registers keep the core footprint minimal. The integrated 8-bit A/D converter (where applicable on the CE sibling) and on-chip EEPROM data memory (CE-only) distinguish it from earlier 12C5xx devices. The Harvard bus separates program fetches from data accesses, eliminating Von Neumann bottleneck and enabling deterministic instruction timing suitable for real-time control loops. Typical applications include low-power battery-operated sensor nodes, automotive body controllers, appliance control boards, IR remote control transmitters, smoke detectors, electronic locks, smart toys, and simple lighting controllers. The wide 2.5V-5.5V supply range and 6 I/O pins make it a strong fit for human-interface and sensing subsystems that previously required multiple discrete components. When designing with this part, choose the PIC12CE673-04/P variant if non-volatile EEPROM data memory is required for parameter storage. The 'L' low-voltage suffix is essential for 3V-only systems; standard PIC12C673-04/P requires 3.0V-6.0V. PCB layout should minimise noise coupling to the OSC1/OSC2 pins and provide adequate decoupling on VDD/VSS within 25 mm of the package pins.

RFQ যোগাযোগ
PIC12LCE674-04/P - 8-bit CMOS MCU with EEPROM, 4MHz, DIP-8 | Microchip
PIC12LCE674-04/P

PIC12LCE674-04/P - 8-bit CMOS MCU with EEPROM, 4MHz, DIP-8 | Microchip

The Microchip PIC12LCE674-04/P is an 8-bit CMOS microcontroller with on-chip EEPROM data memory and a 10-bit A/D converter, housed in an 8-pin PDIP (PDIP-8) through-hole package. The part is a member of the Microchip PIC12 mid-range family, features 3.5KB of one-time-programmable (OTP) program memory, 128 bytes of RAM, and 6 digital I/O pins, and supports an instruction cycle of 1 microsecond at 4 MHz clock input. An 8-bit PIC microcontroller (MCU) is a low-power, deterministic Harvard-architecture processor that executes a reduced instruction set (RISC) optimized for embedded control. It belongs to the broader category hierarchy of microcontroller -> microprocessor -> integrated circuit -> semiconductor. The "L" prefix indicates a low-voltage variant capable of operating down to 2.5 V, while the "C" suffix denotes CMOS EPROM/EEPROM-based program memory. Low-power, 8-pin PIC MCUs are widely used in cost- and footprint-constrained applications where deterministic interrupt response and ultra-low sleep current are required. Key features of the PIC12LCE674-04/P include 3.5KB OTP EPROM program memory, 128 bytes of RAM, on-chip 64-byte EEPROM data memory (separate from program memory), a 10-bit successive-approximation analog-to-digital converter with up to 4 input channels, a capture/compare/PWM (CCP) module, an 8-bit real-time clock/counter (TMR0) with programmable prescaler, and a Watchdog Timer with dedicated on-chip RC oscillator. The device operates from 2.5 V to 5.5 V across the commercial temperature range of 0 C to +70 C and provides Power-On Reset, Brown-Out Reset, Device Reset Timer, and in-circuit serial programming (ICSP) via two pins. Technically, the PIC12LCE674-04/P uses a 14-bit instruction word with a 33-instruction RISC set, where every instruction executes in a single cycle (1 microsecond at 4 MHz) except program branches, which take two cycles. The Harvard bus architecture separates program and data paths to allow simultaneous instruction fetch and operand read. The 10-bit ADC uses successive approximation with a maximum sampling rate of approximately 30 ksps at 5 V and provides four analog input multiplexed channels shared with digital I/O, simplifying external signal-conditioning circuitry. On-chip EEPROM supports 1 million erase/write cycles typical and is byte-accessible through dedicated SFRs, eliminating external serial EEPROM in many designs. Typical applications include battery-powered sensor signal conditioning, small appliance controllers, LED lighting drivers with dimming, automotive body electronics (interior lighting, door modules), remote controls, smart thermostats, and low-cost data loggers. The integrated EEPROM and ADC allow standalone analog-sensing nodes with non-volatile calibration storage. The CCP module adds hardware PWM capability useful for motor speed control and LED dimming. When designing with this part, note that the OTP program memory cannot be field-updated; for production flexibility use the flash-based PIC12F675 or PIC12F683 equivalents instead. Because the ADC input pins are shared with digital I/O, configure unused channels as digital outputs to minimize crosstalk and supply current. A 0.1 uF decoupling capacitor placed within 5 mm of VDD is essential for ADC noise immunity.

RFQ যোগাযোগ
PIC12LCE674-04I/P - 8-Bit 4MHz CMOS MCU with EEPROM, 3.5KB OTP | Microchip
PIC12LCE674-04I/P

PIC12LCE674-04I/P - 8-Bit 4MHz CMOS MCU with EEPROM, 3.5KB OTP | Microchip

The Microchip Technology PIC12LCE674-04I/P is an 8-bit RISC CMOS microcontroller with on-chip EEPROM data memory, 3.5KB (2K x 14) of OTP program memory, 128 bytes of RAM, and a 4 MHz maximum clock input, all housed in an 8-pin PDIP through-hole package rated for the industrial temperature range. It executes a reduced 33-instruction set with single-cycle (1 µs) execution for nearly all opcodes and two-cycle branches, integrating power-on reset (POR), a device reset timer (DRT), a watchdog timer (WDT) with its own on-chip RC oscillator, and a programmable 8-bit prescaler on TMR0. The 'LC' family variant is the low-power (wide-Vdd) member of the PIC12C×67x line, supporting 2.5V to 5.5V operation, which is wider than the standard PIC12C×67x range. An 8-bit microcontroller is a single-chip computer built around an 8-bit data path, an arithmetic logic unit (ALU), program memory, working RAM, and a set of peripherals such as timers, ADC channels, and I/O ports. PIC microcontrollers from Microchip sit in the broader hierarchy of microcontrollers -> microcontrollers and processors -> integrated circuits (ICs) -> semiconductors. The 8-bit class typically targets cost-sensitive, low-power embedded applications where deterministic behavior and small code footprint matter more than raw throughput, making parts like the PIC12LCE674 well suited to appliance controls, sensor signal conditioning, and battery-powered instrumentation. Key features distinguishing this part include 6 general-purpose digital I/O pins, an internal 8-bit real-time clock/counter (TMR0), and a programmable watchdog timer for unattended reset recovery. The '04' speed suffix designates the 4 MHz oscillator grade, and the 'I' temperature suffix denotes the industrial -40°C to +85°C operating range. Compared with the PIC12C×67x OTP-only family, the PIC12LCE674 includes non-volatile EEPROM data memory, which is uncommon on 8-pin PICs and useful for storing calibration constants, user settings, or device identity that must survive power cycles. Typical applications include low-power sensor interface boards, simple motor or relay controllers, household white goods, and standalone timing or alarm controllers. The wide 2.5V–5.5V supply window makes the part tolerant of unregulated battery chemistries such as 3.6V lithium thionyl chloride or two alkaline cells in series. Engineers should note that the 'CE' (EEPROM) variant must be selected when persistent data storage is required; the 'C' (OTP-only) variant cannot retain user data through power-down. Program memory is OTP and cannot be electrically erased, so firmware must be fully validated before commitment to production units.

RFQ যোগাযোগ
PIC12LF1501-E/MC - 8-bit MCU, 1.75KB Flash, 20MHz, 8-DFN | Microchip
PIC12LF1501-E/MC

PIC12LF1501-E/MC - 8-bit MCU, 1.75KB Flash, 20MHz, 8-DFN | Microchip

The Microchip PIC12LF1501-E/MC is an 8-bit Flash microcontroller in the PIC12LF family, featuring a 20 MHz CPU, 1.75 KB (1K x 14) of program Flash memory and 64 bytes of RAM in an 8-pin DFN (2x3 mm) package with exposed pad. The 'LF' suffix designates the wide-voltage low-power variant that operates from 1.8 V to 3.6 V and supports eXtreme Low Power (XLP) technology for battery-sensitive applications. An 8-bit microcontroller is a single-chip computer that integrates a CPU, RAM, program Flash, peripherals and I/O on one die. PIC microcontrollers use a Harvard RISC architecture with separate program and data buses, allowing instructions to be fetched while data is being read or written. Within the broader taxonomy, PIC12LF1501 is a member of: PIC12LF family -> PIC12/16 mid-range -> PIC microcontrollers -> 8-bit MCU -> microcontroller -> embedded IC -> semiconductor. This hierarchy is useful when searching parametric catalogs and AI knowledge graphs for related parts. Key features include 1.75 KB self-programmable Flash, 64 bytes SRAM, an integrated 10-bit ADC with computation, a 5-bit DAC, two 8-bit timers and one 16-bit timer, an Enhanced Universal Synchronous Asynchronous Receiver Transmitter (EUSART), and the standard PIC12 peripheral set including Configurable Logic Cells (CLC), Numerically Controlled Oscillator (NCO), Complementary Waveform Generator (CWG) and PWM. Brown-out Reset (BOR) and a watchdog timer add reliability in noisy or battery-depleted environments. The device uses Microchip's mid-range 14-bit instruction set with a 20 MHz internal oscillator that provides ±2% accuracy over voltage and temperature. XLP technology keeps typical active current below 1.4 mA at 4 MHz and sleep current in the nanoamp range, enabling coin-cell battery designs. Typical applications include remote controls, IoT sensor nodes, low-power wireless companions, LED lighting controllers, smart home endpoints, and consumer handheld products. The small 8-DFN footprint and wide operating voltage make the PIC12LF1501 ideal for space- and power-constrained designs. When designing, ensure decoupling (100 nF + 1 uF) is placed within 2 mm of VDD and that the exposed pad is soldered to a ground island for thermal dissipation. The 8-DFN package has no leads, so the EP must be the primary thermal and electrical path. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ যোগাযোগ
PIC12LF1501-E/MS - 8-bit MCU, 1.75KB Flash, 20MHz, MSOP-8 | Microchip
PIC12LF1501-E/MS

PIC12LF1501-E/MS - 8-bit MCU, 1.75KB Flash, 20MHz, MSOP-8 | Microchip

The Microchip Technology PIC12LF1501-E/MS is an 8-bit RISC microcontroller based on the PIC12 CPU core, delivering 20MHz operation with 1.75KB (1K x 14) of Flash program memory and 64 bytes of SRAM in an 8-pin MSOP (MS) package. Designed for low-voltage, low-power applications, it operates across a 2.5V to 3.6V supply range and provides 6 general-purpose I/O pins. What is a PIC12 microcontroller? The PIC12 family is Microchip's line of 8-bit Harvard-architecture microcontrollers built around a RISC instruction set with 14-bit wide instructions. PIC microcontrollers are flash-programmable system-on-chip devices that integrate CPU core, non-volatile program memory, RAM, EEPROM (where present), and a rich set of peripherals including ADC, timers, PWM, comparators, and communication modules. The PIC12LF1501 belongs to the PIC12F subfamily, which targets low-pin-count applications. The 'LF' suffix indicates the extended low-voltage operating range, while the '1501' designates the part within the family. Key features include an integrated 10-bit ADC with up to 4 input channels, a 5-bit DAC, three timers, four PWM channels, a comparator, and on-chip configurable logic cells (CLC) and a numerically controlled oscillator (NCO). The device also includes a brown-out reset (BOR), power-on reset (POR), and a watchdog timer (WDT) for robust embedded operation. Per the Microchip PIC12LF1501 datasheet, these peripherals are accessible via the standard PIC12 instruction set. The PIC12LF1501 uses an enhanced mid-range PIC core with a 14-bit instruction word, 8-level hardware stack, and interrupt controller supporting both core and peripheral interrupts. Internal oscillator options support operation up to 16MHz without external components, while the device can also accept an external clock. The 64-byte SRAM and 1.75KB Flash provide sufficient program space for typical small-form-factor applications in consumer, industrial, and IoT markets. Typical applications include battery-powered IoT sensor nodes, consumer remote controls, LED lighting controllers, small motor control loops, white goods, and wearable devices. The combination of 6 I/O, 10-bit ADC, CLC, NCO, and PWM makes it especially well-suited for mixed-signal, low-power designs. When designing with this part, verify your VDD stays within 2.5V to 3.6V. Use the internal 16MHz HFINTOSC to minimize external component count, and leverage the CLC and NCO peripherals to offload timing-critical logic from the CPU. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing a complete sourcing and design reference for engineers evaluating the PIC12LF1501-E/MS.

RFQ যোগাযোগ
PIC12LF1501-E/P - 8-bit MCU, 1.75KB Flash, 8-PDIP | Microchip
PIC12LF1501-E/P

PIC12LF1501-E/P - 8-bit MCU, 1.75KB Flash, 8-PDIP | Microchip

The Microchip Technology PIC12LF1501-E/P is an 8-bit PIC microcontroller from the PIC12LF1501 family featuring 1.75KB (1K x 14) of Flash program memory, 64 bytes of SRAM, and 6 I/O pins in an 8-pin PDIP through-hole package. The device operates from a 2.5V to 3.6V supply, runs at up to 20MHz CPU clock (16MHz internal oscillator typical), and integrates on-chip peripherals including a 10-bit ADC, Configurable Logic Cells (CLC), and a Numerically Controlled Oscillator (NCO) for mixed-signal and waveform-generation tasks. An 8-bit microcontroller (MCU) is a small computer on a single integrated circuit containing a CPU, program memory (Flash/ROM), data memory (RAM), and programmable I/O peripherals. PIC microcontrollers sit within the broader taxonomy of: MCU -> microcontroller -> embedded processor -> semiconductor. They are widely used in cost- and power-constrained applications such as consumer appliances, IoT edge nodes, and automotive sub-systems where deterministic real-time behaviour, low quiescent current, and easy programmability outweigh the need for higher computational throughput. Key features of the PIC12LF1501 include the CLC peripheral that lets designers implement custom combinational or sequential logic on-chip without external gates, the NCO block for high-resolution frequency generation suited to dimming, tone generation, and motor control loops, brown-out reset (BOR), and an extended temperature range of -40C to +125C (E suffix). The LF designation indicates the low-voltage variant, which trades absolute maximum voltage headroom for lower active and sleep current consumption compared with the standard F variant. The device implements Microchip's enhanced mid-range 8-bit core with a single-cycle hardware multiplier, deep hardware stack, and a Harvard memory architecture. The 14-bit instruction word and 8-bit data path give a compact code footprint ideal for state machines and interrupt-driven firmware. Typical applications include LED lighting control, battery-powered IoT sensors, small appliance controllers, and consumer IR remote transmitters. When designing with this MCU, budget current consumption carefully for battery life and verify ADC input impedance against source impedance to avoid conversion errors. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ যোগাযোগ
PIC12LF1501-I/MC - 8-bit MCU, 1.75KB Flash, 20MHz, 8-DFN | Microchip
PIC12LF1501-I/MC

PIC12LF1501-I/MC - 8-bit MCU, 1.75KB Flash, 20MHz, 8-DFN | Microchip

The Microchip Technology PIC12LF1501-I/MC is an 8-bit PIC microcontroller in a compact 8-pin DFN (2x3 mm) package, featuring 1.75 KB (1K x 14) of Flash program memory, 64 bytes of RAM, and a 10-bit ADC. It operates at up to 20 MHz instruction clock and is part of the nanoWatt XLP extreme-low-power family designed for battery-powered and energy-harvesting applications. A PIC12 microcontroller is an 8-bit Reduced Instruction Set Computer (RISC) architecture from Microchip's PIC family, featuring a Harvard architecture with separate program and data buses. The 12-series denotes small-pin-count devices (6-8 pins), historically used for glue logic replacement, simple sensor interfaces, and cost-sensitive embedded control. The "LF" prefix indicates the wide-voltage, low-power variant supporting 1.8V to 3.6V operation, while the "F" mid-letter indicates Flash program memory - the foundation of the modern PIC ecosystem. PIC12F microcontrollers sit in the hierarchy: microcontroller -> embedded MCU -> 8-bit MCU -> PIC12 series -> PIC12F1501 sub-family. Key features include six I/O pins with individual direction control, four 10-bit ADC channels with internal voltage reference support, enhanced PWM module with up to three outputs, configurable logic cell (CLC), numerically controlled oscillator (NCO), and complementary waveform generator (CWG). Peripherals also include a watchdog timer with its own oscillator, brown-out detect/reset, power-on reset, and an in-circuit serial programming (ICSP) interface. The 8-bit core executes most instructions in one cycle, delivering up to 5 MIPS at 20 MHz while consuming roughly 1.8 mA active and sub-microamp currents in sleep. Architecturally, the device uses a 14-bit instruction word Flash and 8-bit data path, with the CPU core, peripherals, and I/O tied to an internal peripheral bus. The CWG and NCO peripherals enable sophisticated waveform synthesis in hardware, often replacing external timers or DACs in lighting, motor-control, and resonant-driver designs. Internal oscillator calibration to +/-1 percent provides timing accuracy suitable for UART baud-rate generation without external crystals. Typical applications include IoT sensor nodes, low-power wireless transmitters, LED lighting controllers, battery chargers, handheld consumer devices, fan controllers, and remote controls. Designers select this part when PCB area is constrained to roughly 6 mm^2 and the application needs on-board intelligence with minimal standby current. Key design consideration: although the DFN package has an exposed thermal pad, the dominant thermal constraint in 8-pin PIC devices is the small pin count, not power dissipation. Validate your I/O budget and ADC channel requirements early - the six I/O pins must serve ICSP, reset, and your application simultaneously. This page synthesizes distributor pricing, drop-in alternative analysis across the PIC12 and PIC16 families, and practical low-power design notes not found in the manufacturer datasheet.

RFQ যোগাযোগ
PIC12LF1501-I/MF - 8-bit MCU, 1.75KB Flash, 20MHz, 8-DFN | Microchip
PIC12LF1501-I/MF

PIC12LF1501-I/MF - 8-bit MCU, 1.75KB Flash, 20MHz, 8-DFN | Microchip

The Microchip Technology PIC12LF1501-I/MF is an 8-bit PIC microcontroller in the PIC12F family with 1.75 KB (1K x 14) of Flash program memory, 64 bytes of RAM, a 10-bit ADC, and a maximum CPU clock of 20 MHz, packaged in an 8-pin DFN (3x3 mm). It is part of Microchip's PIC12(L)F1501 family of XLP (eXtreme Low Power) microcontrollers targeted at compact, low-power embedded designs. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, program memory (Flash), data memory (RAM), and peripherals on one die. The PIC12LF1501 belongs to the RISC-based PIC family and is positioned as a low-pin-count, low-power MCU within the broader PIC microcontroller taxonomy (8-bit PIC -> PIC12F family -> PIC12LF1501 sub-family). It is widely used as a 'system supervisor' or small task controller that augments larger processors in mixed-signal systems. Key features include a 20 MHz internal oscillator (16 MHz internal RC with PLL to 32 MHz/divide options per family data), 6 I/O pins, an integrated 10-bit ADC, a configurable logic cell (CLC), complementary waveform generator (CWG) and numerically controlled oscillator (NCO) peripherals, brown-out reset, power-on reset, and wide operating voltage support suited to battery-powered applications. The XLP technology label indicates sub-microamp sleep currents typical of Microchip's nanoWatt XLP family. The 'LF' suffix denotes the low-voltage (2.5V to 3.6V) variant; the 'F' (non-L) PIC12F1501 operates up to 5.5V. Architecture is 14-bit instruction word, modified Harvard, with separate program and data buses, allowing instruction fetch and data read to occur in the same cycle - the architectural feature that gives the PIC family its deterministic interrupt and instruction throughput. Typical applications include LED lighting controllers, sensor signal conditioning, small appliance control, battery chargers, IoT edge nodes, and general-purpose 'glue logic' replacement. The 8-pin DFN footprint makes it a strong choice when PCB area is at a premium and the design only needs 4-6 I/O pins. When designing with this MCU, choose the LF variant (2.5V to 3.6V) for direct Li-ion or 3V coin-cell operation, and verify programming tool compatibility (PICkit 3, MPLAB ICD 3/4, MPLAB X IDE) before locking the BOM. The 8-DFN package has a thermal pad that should be soldered to the PCB ground plane for thermal dissipation and mechanical robustness. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not consolidated in the manufacturer datasheet alone.

RFQ যোগাযোগ
PIC12LF1501-I/P - 8-Bit MCU, 1.75KB Flash, 10-bit ADC, DIP-8 | Microchip
PIC12LF1501-I/P

PIC12LF1501-I/P - 8-Bit MCU, 1.75KB Flash, 10-bit ADC, DIP-8 | Microchip

The Microchip Technology PIC12LF1501-I/P is an 8-bit RISC flash microcontroller in the PIC12 (L)F1501 family, featuring a PIC12 CPU core running at up to 20MHz, 1.75KB (1K x 14) of flash program memory, 64 bytes of data RAM, and six general-purpose I/O pins, all housed in an 8-pin PDIP through-hole package. It integrates a 10-bit ADC, Configurable Logic Cells (CLC), a Numerically Controlled Oscillator (NCO), and enhanced mid-range core peripherals, while the "LF" suffix denotes an extended voltage range of 1.8V to 3.6V designed for low-power XLP (eXtreme Low Power) operation. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and programmable I/O peripherals on one die; 8-bit MCUs such as the PIC12LF1501 sit at the bottom of the embedded complexity hierarchy (8-bit MCU -> microcontroller -> embedded IC -> semiconductor). They are widely chosen for simple, deterministic control loops where cost, code size, and battery life matter more than raw throughput. Within Microchip's portfolio, the PIC12 (L)F1501 family is a compact "8-pin Flash, 8-Bit Microcontrollers with XLP Technology" series targeting hobbyist, consumer, and IoT edge-node designs. Key features include 1.75KB flash / 64B SRAM / 256B EEPROM, an internal oscillator, an active-high MCLR reset, on-board ICD (in-circuit debugger) support, and deep-sleep current typically quoted in the nanoampere range thanks to nanoWatt XLP technology. The DIP-8 package allows easy prototyping on breadboards and through-hole PCBs, which is a major reason this specific MPN (-I/P variant) is so popular in education, maker, and low-volume designs. The integrated 10-bit ADC is sufficient for sensor reading, while the CLC and NCO peripherals allow glue-logic replacement and precise frequency generation without external components. Typical applications include battery-powered sensor nodes, LED lighting controllers, small motor/PWM drivers, home-appliance user interfaces, and consumer handheld devices. With a wide 1.8V-3.6V supply and low sleep current, the PIC12LF1501 fits 2xAA / coin-cell powered products that need months-to-years of standby life. When designing with this part, choose the LF variant (not the F variant) when operating below 2.0V, and remember that the -I/P package is the industrial-temperature (-40C to +85C) through-hole option; the -E/P variant is the extended-temperature grade. This page synthesizes distributor pricing, same-package drop-in alternatives, and practical design notes not found on the manufacturer product page.

RFQ যোগাযোগ
PIC12LF1501-I/SN - 8-bit 20MHz 1.75KB Flash MCU | Microchip
PIC12LF1501-I/SN

PIC12LF1501-I/SN - 8-bit 20MHz 1.75KB Flash MCU | Microchip

The Microchip Technology PIC12LF1501-I/SN is an 8-bit PIC® 12F-series RISC microcontroller with 1.75KB (1K x 14) of Flash program memory, 64 bytes of SRAM, and a 4-channel 10-bit ADC. It operates up to 20MHz from a 2.5V to 3.6V supply in an 8-pin SOIC (SN) package, with 6 I/O lines sharing the standard PIC12 pinout. An 8-bit microcontroller (MCU) is a small computer-on-a-chip built around an 8-bit data path and integrated peripherals such as Flash, RAM, ADC, timers, and configurable logic cells. Within Microchip's taxonomy, the PIC12LF1501 belongs to the PIC12F family -> 8-bit PIC microcontrollers -> microcontrollers (MCU) -> embedded microcontrollers -> semiconductors. The 'LF' suffix denotes a low-voltage (2.5V-3.6V) variant aimed at battery-powered designs that sit below the standard PIC12F 5V operation. Key features include Microchip's eXtreme Low Power (XLP) technology with sub-µA sleep currents, three 8-bit timers (TMR0/TMR2 with postscaler/TMR4 or TMR6), a Configurable Logic Cell (CLC), a Numerically Controlled Oscillator (NCO), 4-channel 10-bit ADC, and an on-board 4xPLL that allows 20MHz operation from an internal 5MHz HFINTOSC. The device also offers two comparators and an enhanced PWM with up to 4 outputs, providing significant analog and digital integration for its 8-pin footprint. The PIC12LF1501 uses a Harvard RISC core with a single-cycle instruction architecture (apart from branches), enabling predictable 20MHz throughput (~5 MIPS). The internal oscillator, PLL, and ADC enable BOM reduction by removing the external crystal, while the CLC and NCO blocks add hardware glue logic without extra ICs. The SOIC-8 package simplifies hand prototyping and reflow assembly on small boards. Typical applications include battery-powered IoT sensor nodes, wearable devices, general-purpose LED lighting controllers, low-power remote controls, and small consumer appliances where 8 pins are sufficient. Designers pick this part when they need more analog integration (CLC, NCO, ADC) than the PIC12F675/683 while retaining the same SOIC-8 footprint and pinout. When designing, ensure VDD decoupling is placed close to pin 1 and pin 8, and that the ICSPDAT/ICSPCLK pins remain accessible for in-circuit serial programming. Note the -I (industrial) temperature grade covers -40°C to +85°C, so the -E grade is required for -40°C to +125°C automotive/industrial-thermal designs. This page synthesizes verified distributor pricing, drop-in same-package alternatives, application notes, and design notes not consolidated on a single manufacturer page, accelerating sourcing and design-in decisions for the PIC12LF1501-I/SN.

RFQ যোগাযোগ
PIC12LF1501T-I/MC - 8-bit MCU, 1.75KB Flash, 20MHz, 8-DFN | Microchip
PIC12LF1501T-I/MC

PIC12LF1501T-I/MC - 8-bit MCU, 1.75KB Flash, 20MHz, 8-DFN | Microchip

The Microchip Technology PIC12LF1501T-I/MC is an 8-bit PIC12 family RISC microcontroller featuring 1.75KB (1K x 14) of Flash program memory, 64 bytes of RAM, and a 10-bit ADC, housed in an 8-pin DFN (2x3 mm) package. It operates from a 2.5V to 3.3V supply and supports instruction execution at up to 20MHz via an internal oscillator, making it well suited for compact, low-pin-count embedded designs. An 8-bit PIC microcontroller is a small, low-cost, low-power CMOS processor built around Microchip's Harvard RISC architecture. It belongs to the PIC12 sub-family, the smallest-pin-count branch of the PIC10/12/16/18 hierarchy, and falls under the broader microcontroller -> embedded controller -> semiconductor taxonomy. PIC12LF variants specifically use the 'LF' process node for low-voltage operation between 1.8V and 3.6V, distinguishing them from 'F' variants that target 2.3V to 5.5V. The 'T' suffix indicates Tape & Reel packaging, while 'I/MC' denotes the industrial temperature grade (-40C to +85C) in the DFN-8 (MC) package. Key features of the PIC12LF1501T-I/MC include 6 I/O pins, four 10-bit ADC channels, one comparator, a Configurable Logic Cell (CLC), a Complementary Waveform Generator (CWG), and a Numerically Controlled Oscillator (NCO). The device also supports eXtreme Low Power (XLP) sleep currents below 20 nA, making it competitive against larger MCUs in energy-harvesting and battery-backed applications. Architecturally, the PIC12LF1501 uses a 14-bit instruction word and a two-stage pipeline, delivering deterministic interrupt latency typical of the PIC family. The 10-bit ADC uses a Successive Approximation Register (SAR) architecture with acquisition control, while the CWG module provides dead-band control for half-bridge MOSFET drive. Internal oscillator calibration is factory-trimmed to within +/-1% typical. Typical applications include IoT sensor nodes, wearable health bands, low-end remote controls, LED lighting controllers, and battery-powered consumer accessories. The 6 I/O and small footprint also serve well in disposable medical devices and disposable industrial tags. When designing with this part, ensure decoupling of VDD with a 100 nF ceramic capacitor placed within 3 mm of the pin, and configure unused I/O as outputs low to minimize current draw. Programming is supported via MPLAB X IDE, PICkit 3/4, and ICD 3/4. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ যোগাযোগ
PIC12LF1501T-I/MS - 8-Bit MCU, 1.75KB Flash, 20MHz, MSOP-8 | Microchip
PIC12LF1501T-I/MS

PIC12LF1501T-I/MS - 8-Bit MCU, 1.75KB Flash, 20MHz, MSOP-8 | Microchip

The Microchip PIC12LF1501T-I/MS is an 8-bit RISC microcontroller based on the enhanced PIC12 mid-range core, integrating 1.75KB (1K x 14 words) of self-programmable Flash program memory and 64 bytes of SRAM in an 8-pin MSOP package. The device operates at up to 20 MHz instruction frequency from a 2.5 V to 3.6 V supply, with six general-purpose I/O pins, one 10-bit ADC with up to 4 input channels, two 8-bit timers plus one 16-bit timer, and on-chip peripherals including Configurable Logic Cells (CLC), a Numerically Controlled Oscillator (NCO), and enhanced PWM. The LF prefix denotes the low-voltage variant of the PIC12F1501 family. A PIC12 microcontroller is a member of the 8-bit microcontroller family, which sits in the broader taxonomy of embedded microcontrollers -> microcontrollers -> microprocessors and controllers -> semiconductors. PIC12 devices use a Harvard-architecture RISC instruction set with a fixed 14-bit instruction width, making them well suited for cost- and power-sensitive embedded applications that require deterministic interrupt latency and small code footprint. The PIC12LF1501 specifically belongs to the PIC12F1501 low-pin-count sub-family designed for compact analog and sensor-interface designs. Key features include 1.75KB Flash with self-programmability, 64 bytes SRAM, 6 I/O pins, a 10-bit ADC with 4 channels, two 8-bit timers, one 16-bit timer, enhanced PWM, CLC, NCO, and a power-saving Sleep mode drawing microamp-level current. The internal 16 MHz high-speed oscillator and 32 kHz low-power oscillator allow flexible clocking without external crystals. Architecturally the device uses a 14-bit instruction word, 8-level hardware stack, and single-cycle ALU operations, giving an effective throughput approaching 5 MIPS at 20 MHz. The 10-bit ADC is implemented with a successive-approximation register (SAR) topology, and the CLC blocks allow combinatorial logic to be implemented on-chip, reducing external gates. On-chip debug is supported via the ICSP two-wire interface. Typical applications include IoT sensor nodes, battery-powered remote controls, low-cost LED controllers, capacitive-touch user interfaces, small appliances, smart wearables, and consumer toys. Its low Sleep current makes it attractive for energy-harvesting designs and always-on interrupt-driven systems. When designing with this part, ensure VDD decoupling uses a 100 nF ceramic capacitor placed within 2 mm of the VDD pin, keep analog signal traces short, and connect unused I/O pins to defined logic levels to minimize ICC leakage. This page synthesizes distributor pricing, drop-in same-package alternatives from Microchip, and practical design notes not found in the standalone manufacturer datasheet, giving procurement and design engineers a single reference for evaluation and sourcing.

RFQ যোগাযোগ
PIC12LF1501T-I/SN - 8-Bit MCU 1.75KB Flash 20MHz | Microchip
PIC12LF1501T-I/SN

PIC12LF1501T-I/SN - 8-Bit MCU 1.75KB Flash 20MHz | Microchip

The Microchip Technology PIC12LF1501T-I/SN is an 8-bit PIC microcontroller from the PIC® 12F family featuring 1.75KB (1K x 14) of Flash program memory, 64 bytes of RAM, and 6 I/O pins in a compact 8-pin SOIC (SN) package. It operates at up to 20MHz instruction clock from a 2.5V to 3.6V supply and integrates a 10-bit ADC, Configurable Logic Cell (CLC), Numerically Controlled Oscillator (NCO), Complementary Waveform Generator (CWG), and Enhanced Universal Synchronous Asynchronous Receiver Transmitter (EUSART). An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data path that fetches, decodes, and executes instructions stored in non-volatile program memory. In the broader taxonomy, an 8-bit MCU belongs to the microcontroller family, which sits within embedded processors, which in turn are a class of semiconductors used in power-managed digital control. The PIC® architecture uses a Harvard RISC core with single-cycle instructions, providing deterministic timing for real-time control loops. Key features include a 20MHz internal oscillator, 10-bit ADC with up to 4 channels, 4 PWM outputs via the CWG, brown-out reset (BOR), power-on reset (POR), watchdog timer (WDT), and In-Circuit Serial Programming (ICSP) via two pins. The CLC and NCO peripherals allow digital logic and frequency synthesis without external components, reducing BOM cost. The wide 2.5V-3.6V operating range supports both 3.3V regulated supplies and direct 2x AA/AAA battery operation. Technical depth: the device is built on Microchip's enhanced mid-range 8-bit core with 200ns instruction execution, 16-level hardware stack, and 33 single-word instructions. Internal peripherals share an interrupt controller with vectored priority, allowing deterministic response to ADC, timer, CLC, and EUSART events. The 'LF' prefix designates the low-voltage F-series variant optimized for low-power 3.3V operation. Typical applications include battery-powered sensor nodes, LED lighting controllers, consumer appliances, low-cost motor control, and general-purpose logic replacement. The 6 I/O pins are sufficient for blink, fade, sense, and communicate designs, while the ADC enables direct interface with thermistors, potentiometers, and analog sensors. Design consideration: at 20MHz and 3.3V, core current is typically a few mA active; for battery applications, use SLEEP mode between ADC samples to drop current to sub-microamp levels and extend coin-cell life. The 'T' suffix denotes tape-and-reel packaging; pinout is identical to the non-T variant. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical low-power design notes not found in the manufacturer datasheet alone, making it easier to select and source the PIC12LF1501T-I/SN for production.

RFQ যোগাযোগ
PIC12LF1552-E/MS - 8-bit MCU, 3.5KB Flash, MSOP-8 | Microchip
PIC12LF1552-E/MS

PIC12LF1552-E/MS - 8-bit MCU, 3.5KB Flash, MSOP-8 | Microchip

The Microchip Technology PIC12LF1552-E/MS is an 8-bit flash microcontroller in the PIC12LF family, featuring 3.5KB of program Flash memory, 256 bytes of RAM, and a 32 MHz internal oscillator in an 8-pin MSOP package. It is one of the smallest and lowest-cost PIC MCUs with hardware I2C/SMI support, designed for space-constrained and cost-sensitive embedded applications. What is a PIC microcontroller? A PIC (Peripheral Interface Controller) is a family of 8-bit, 16-bit, and 32-bit microcontrollers made by Microchip Technology, built on a Harvard RISC architecture with separate program and data buses. PIC MCUs integrate a CPU, Flash program memory, RAM, peripherals (ADC, timers, communication interfaces), and I/O into a single IC, forming the embedded "brain" of countless consumer, industrial, and automotive products. Within that taxonomy, the PIC12F subfamily targets the smallest 6-, 8-, and 14-pin packages, optimized for cost-sensitive and compact designs where every square millimeter of PCB matters. Key features of the PIC12LF1552 include a 4-channel 10-bit ADC, advanced Capacitive Voltage Divider (CVD) controls for mTouch capacitive sensing, a programmable voltage reference, hardware MI2C/SPI peripherals, 25 mA source/sink I/O for direct LED drive, an internal 32 MHz oscillator, Low-Power Brown-Out Reset (LPBOR), and an extended Watchdog Timer. The "LF" suffix indicates the wide 1.8V to 3.6V operating range, allowing direct battery connection for single-cell Li-ion or two-AA designs. Architecturally, the device uses a 14-bit instruction word with a two-stage pipeline, achieving throughput of 8 MIPS at 32 MHz. On-chip peripherals include the CVD front-end for mTouch proximity and button sensing, programmable reference for ADC calibration, and configurable digital I/O with weak pull-ups. Typical applications include mTouch capacitive touch buttons, low-cost IoT sensor nodes, consumer remote controls, LED lighting strips, wearable fitness accessories, battery-powered toys, and small appliance user interfaces. In all of these, the device's tiny MSOP-8 footprint combined with its integrated peripherals eliminates the need for external ADC, touch controller, or LDO components. A key design consideration when using the PIC12LF1552 is oscillator accuracy: the internal 32 MHz HFINTOSC has a typical accuracy of approximately +/-1% over voltage and temperature, so designs requiring USB, UART at high baud, or RF timing should use a calibrated oscillator mode or external crystal. The CVD module also requires firmware tuning to compensate for board parasitic capacitance and temperature drift. This page synthesizes distributor pricing, drop-in alternative MSOP-8 PIC12LF/12F/16F family parts, and practical design notes not found in the manufacturer datasheet alone.

RFQ যোগাযোগ
PIC12LF1552-E/P - 8-bit MCU 32MHz 3.5KB Flash | Microchip
PIC12LF1552-E/P

PIC12LF1552-E/P - 8-bit MCU 32MHz 3.5KB Flash | Microchip

The Microchip Technology PIC12LF1552-E/P is an 8-bit PIC® 12F-family microcontroller running up to 32MHz internal oscillator with 3.5KB (2K x 14) Flash program memory, 256 bytes RAM, and a hardware I2C peripheral, housed in an 8-pin PDIP through-hole package. It targets cost- and space-constrained embedded designs that still need a true hardware I2C/SMBus master and capacitive-touch (mTouch) sensing channels. An 8-bit microcontroller (MCU) is a small programmable computer on a single chip combining a CPU, RAM, Flash program memory, and peripherals such as ADC, timers, and communication blocks. PIC microcontrollers are widely used in consumer, industrial, and automotive applications for deterministic control loops. The PIC12LF1552 sits inside the PIC® 12F family -> 8-bit PIC® family -> microcontrollers -> integrated circuits -> semiconductor device hierarchy. Key features include 32MHz internal oscillator, 6 I/O pins, 10-bit ADC with up to 4 channels, 2 timers, hardware I2C/SMBus master, mTouch capacitive-touch sensing peripheral, and 1.8V-3.6V wide operating voltage. The integrated mTouch peripheral enables proximity and button-touch sensing without external RC components, reducing BOM and PCB area for HMI designs. The PIC12LF1552 uses a RISC architecture with 49 instructions and a 14-bit instruction word, providing deterministic instruction timing ideal for real-time control. The wide 1.8V-3.6V Vdd range supports single-cell Li-ion, two-cell coin-cell, and 3.3V regulated rails. The hardware I2C block supports both Standard-mode (100 kHz) and Fast-mode (400 kHz) operation with dedicated baud-rate generator, freeing the core from bit-banging overhead. Typical applications include capacitive-touch user interfaces, LED lighting controllers, small appliances, sensor nodes, and battery-powered IoT endpoints. Its tiny 8-pin footprint and mTouch capability make it well suited for replacing mechanical buttons and sliders in consumer white goods. When designing with this device, ensure input supply decoupling with a 0.1 µF ceramic capacitor placed close to Vdd. For mTouch applications, follow Microchip application notes on PCB layout and guard-ring techniques to achieve stable capacitive measurements under environmental noise. This page synthesizes distributor pricing, drop-in alternative listings, and practical design notes not found in the manufacturer datasheet.

RFQ যোগাযোগ
PIC12LF1552-E/SN - 8-Bit 32MHz 3.5KB Flash MCU | Microchip
PIC12LF1552-E/SN

PIC12LF1552-E/SN - 8-Bit 32MHz 3.5KB Flash MCU | Microchip

The Microchip Technology PIC12LF1552-E/SN is an 8-bit PIC® 12F-series microcontroller featuring a 32MHz internal oscillator, 3.5KB (2K x 14) Flash program memory, 256 bytes of RAM, and a 10-bit ADC, housed in an 8-pin SOIC (SN) package. It is one of the smallest and lowest-cost PIC microcontrollers with hardware I2C support, designed for space-constrained embedded designs. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory (Flash), volatile data memory (RAM), and peripheral interfaces such as ADC, timers, and communication ports. PIC12F-series MCUs sit at the low end of the PIC12 architecture, optimized for cost-sensitive applications that need only 6 I/O pins and minimal code space. Within Microchip's broader hierarchy, the PIC12LF1552 belongs to PIC microcontroller -> 8-bit MCU -> embedded controller -> semiconductor IC. Key features include 32MHz CPU speed (8MHz instruction cycle with 4x PLL), hardware I2C/SPI, 6 I/O pins, a 10-bit ADC with up to 4 channels, multiple timer modules, and an internal 32kHz LFINTOSC. The 'LF' prefix denotes the wide 1.8V-3.6V supply range suited to battery-powered systems, and the 'E' suffix indicates the -40C to +125C extended operating temperature grade. The PIC12LF1552 uses a RISC-based Harvard architecture with 14-bit instruction words, 8-bit data path, and 49 instruction opcode set. This yields compact code density and deterministic interrupt latency, making it well-suited to real-time control tasks where predictable timing is critical. Typical applications include consumer electronics remote controls, low-cost sensor nodes, LED lighting controllers, capacitive touch HMI (mTouch), small appliance control, and battery-powered IoT edge devices. Its hardware I2C and tiny footprint also suit wearable and disposable medical accessories. When designing, note that 3.5KB Flash limits code size; consider the PIC12LF1552-E/P (PDIP) variant for through-hole prototyping or PIC12LF1552T-I/SN for tape-and-reel volume production. Always decouple VDD with a 0.1uF ceramic cap placed within 3mm of the pin.

RFQ যোগাযোগ
PIC12LF1552-I/MU - 8-bit 32MHz MCU, 3.5KB Flash | Microchip
PIC12LF1552-I/MU

PIC12LF1552-I/MU - 8-bit 32MHz MCU, 3.5KB Flash | Microchip

The Microchip Technology PIC12LF1552-I/MU is a low-power 8-bit PIC microcontroller featuring a 32 MHz internal oscillator, 3.5 KB (2K x 14) Flash program memory and 256 bytes of SRAM, housed in an 8-pin UDFN (2x3 mm) exposed-pad surface-mount package. It belongs to the PIC12F family and integrates Microchip's mTouch capacitive-touch sensing peripherals alongside configurable logic cells (CLC), a Numerically Controlled Oscillator (NCO), and a 10-bit ADC with computation (ADC2). What is a PIC microcontroller? A PIC microcontroller (Peripheral Interface Controller) is a self-contained microcomputer that integrates a CPU core, program memory (Flash), data memory (RAM), and peripherals such as timers, ADC, communication interfaces, and I/O ports onto a single silicon die. PIC MCUs sit in the broader hierarchy of embedded microcontrollers -> microcontrollers -> microcomputer -> semiconductor -> integrated circuit. The PIC12LF series specifically targets ultra-low-power, space-constrained applications where a small pin count, low operating voltage, and integrated analog peripherals matter most. Key features of the PIC12LF1552 include 1.8V to 3.6V single-supply operation, 4 KB total Flash address space, 6 I/O pins, hardware mTouch capacitive sensing, 4 CLC blocks, a 10-bit ADC with 7 channels, 2 comparators, 1 8-bit and 1 16-bit timer, an EUSART module, and an internal 32 MHz oscillator that eliminates the need for an external crystal. The UDFN-8 (2x3) package enables compact PCB designs in wearables and IoT endpoints. The device uses Microchip's enhanced mid-range 8-bit core with a 14-bit instruction word, executing most instructions in a single clock cycle. The integrated ADC2 (Analog-to-Digital Converter with Computation) performs averaging, filtering, threshold comparison, and oversampling in hardware, reducing firmware complexity and CPU wake-time. The NCO block provides high-resolution frequency generation suitable for dimming LED drivers, IR carrier generation, and tone synthesis without CPU intervention. Typical applications include IoT sensor nodes, wearable fitness and health devices, consumer remote controls, LED lighting controllers, capacitive-touch user interfaces, low-end battery-powered toys, and small home appliances. The wide 1.8V-3.6V range supports single-cell Li-ion and 2xAA/AAA battery chemistries directly. When designing with the PIC12LF1552, ensure the exposed thermal pad (EP) is soldered to a ground copper pour for thermal dissipation and electrical reference. Decouple VDD with a 0.1 µF X7R ceramic capacitor placed within 2 mm of the IC, and reserve the MCLR pin configuration carefully if in-circuit serial programming (ICSP) is required.

RFQ যোগাযোগ
PIC12LF1552-I/P - 8-bit MCU, 32MHz, 3.5KB Flash, 10-bit ADC | Microchip
PIC12LF1552-I/P

PIC12LF1552-I/P - 8-bit MCU, 32MHz, 3.5KB Flash, 10-bit ADC | Microchip

The Microchip Technology PIC12LF1552-I/P is an 8-bit PIC microcontroller in the PIC12F family, featuring a 32MHz internal oscillator, 3.5KB Flash program memory, 256 bytes RAM, 6 I/O pins, a 10-bit ADC with up to 4 channels, and a 5-bit DAC, all housed in an 8-pin PDIP through-hole package. It operates from 1.8V to 3.6V with typical consumption of 3.3V, delivering 32MHz MIPS performance at very low current for cost-sensitive embedded designs. What is an 8-bit microcontroller? An 8-bit microcontroller is a single-chip computer that processes data 8 bits at a time, integrating a CPU, memory, and peripherals. It belongs to the hierarchy: microcontroller -> embedded processor -> semiconductor. The PIC12F series targets compact, low-pin-count applications where board space and BOM cost matter more than raw throughput. The 12LF variant uses Flash program memory, enabling in-circuit reprogramming and faster development iteration. Key features include a high-precision 32MHz internal oscillator, an integrated mTouch capacitive touch sensing peripheral, a 10-bit ADC with acquisition timer, a 5-bit DAC for analog output or trimming, and an enhanced PWM module. The device also offers a watchdog timer, in-circuit debug capability, and low-power sleep modes typical of the PIC12F architecture. The integrated mTouch block eliminates the need for external touch controller ICs in capacitive touch interfaces. The PIC12LF1552 uses Microchip's enhanced mid-range 8-bit core with a 14-bit instruction word and a 2-level hardware stack, supporting 49 instructions. Its 3.5KB Flash (2048 instruction words x 14 bits) and 256-byte SRAM are partitioned for C-compiler-friendly access, making it suitable for both assembly and XC8 C development. The on-chip peripherals share I/O pins via peripheral pin select (PPS) equivalents in the PIC12F family, simplifying PCB routing in 8-pin layouts. Typical applications include capacitive touch user interfaces (buttons, sliders, proximity sensors), LED lighting control with PWM dimming, sensor node readouts with on-chip ADC, low-cost consumer remote controls, and battery-powered IoT endpoints. The 8-pin PDIP package is breadboard-friendly, making the part well suited for hobby, prototyping, and educational use. Designers also deploy it in industrial human-machine interface (HMI) front panels and small appliance control boards. When designing with the PIC12LF1552, allocate at least one I/O pin for ICSP programming/debug (typically ICSPCLK/ICSPDAT). Place a 0.1uF decoupling capacitor within 5mm of VDD, and follow Microchip AN1202 for PCB layout of the mTouch sensing electrodes. The wide operating voltage of 1.8V-3.6V enables direct Li-ion battery operation. This page consolidates distributor pricing, drop-in same-brand and cross-brand alternatives, and practical design guidance not found in the manufacturer datasheet, giving engineers a faster path from concept to prototype.

RFQ যোগাযোগ
PIC12LF1552T-I/MU - 8-bit MCU 3.5KB Flash 32MHz 8-UDFN | Microchip
PIC12LF1552T-I/MU

PIC12LF1552T-I/MU - 8-bit MCU 3.5KB Flash 32MHz 8-UDFN | Microchip

The Microchip Technology PIC12LF1552T-I/MU is an 8-bit PIC microcontroller based on the enhanced mid-range core, delivering up to 32 MHz CPU performance with 3.5 KB Flash program memory and 256 bytes RAM, packaged in a compact 8-pin UDFN (2x3 mm). The device integrates a 4-channel 10-bit Analog-to-Digital Converter (ADC), advanced Capacitive Voltage Divider (CVD) controls for mTouch capacitive sensing, a configurable MI2C/SPI peripheral set, and a 32 MHz internal oscillator. A microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory, working RAM, and configurable peripherals into one IC. Within the broader taxonomy, the PIC12LF1552 belongs to the 8-bit PIC family -> mid-range enhanced core -> embedded microcontroller -> microcomputer -> semiconductor. The "LF" suffix denotes a wide Vdd range (1.8 V to 3.6 V) optimized for low-power and battery applications, while the "/MU" suffix identifies the 2x3 mm 8-UDFN surface-mount package, ideal for space-constrained designs. Key features include 25 mA source/sink current per I/O, a Low-Power Brown-Out Reset (LPBOR) for reliable startup, an extended Watchdog Timer with its own oscillator, and a mTouch CVD peripheral supporting proximity sensing, button matrices, and water-rejection algorithms. The 16 MHz internal oscillator can be multiplied to 32 MHz via the PLL, simplifying BOM by removing external crystals in many designs. Typical applications span capacitive touch user interfaces, low-power IoT sensor nodes, battery-powered consumer devices, and LED lighting controllers. The integrated CVD engine removes the need for an external touch controller, reducing BOM cost and PCB area. Wide 1.8 V to 3.6 V operation supports direct Li-ion or 2xAA battery connection. When designing with this MCU, allocate at least one GP port for ICD debugging and provide a robust ground plane under the UDFN thermal pad to maximize RF immunity for capacitive measurements. Decouple Vdd with a 100 nF ceramic placed within 5 mm of the pin. This page synthesizes distributor pricing, drop-in package-compatible alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ যোগাযোগ
PIC12LF1552T-I/SN - 8-bit MCU, 3.5KB Flash, 32MHz, 8-SOIC | Microchip
PIC12LF1552T-I/SN

PIC12LF1552T-I/SN - 8-bit MCU, 3.5KB Flash, 32MHz, 8-SOIC | Microchip

The Microchip Technology PIC12LF1552T-I/SN is an 8-bit PIC microcontroller featuring 3.5KB Flash program memory, 256 bytes RAM, 32MHz maximum CPU clock, and a 10-bit ADC, housed in an 8-pin SOIC package supplied on tape and reel. It is part of the PIC12F mid-range family targeting low-cost capacitive-touch (mTouch) and general-purpose embedded applications. An 8-bit microcontroller (MCU) is a small computer-on-a-chip that integrates a CPU, program memory (Flash/ROM), data memory (RAM), and peripherals such as timers, ADC, and communication interfaces into a single IC. The PIC12LF1552 belongs to the enhanced mid-range PIC12 architecture with the x14 instruction set (49 instructions, 200 ns instruction execution at 20 MHz). This category sits within the broader hierarchy of microcontrollers -> embedded processors -> semiconductors -> integrated circuits, and is widely used in low-power, cost-sensitive, pin-constrained designs. Key features of this device include 6 I/O pins, an internal 16 MHz oscillator, a 10-bit ADC with up to 4 channels, mTouch capacitive-touch sensing peripherals, an 8-bit timer with prescaler, and wide 1.8V to 3.6V operating voltage supporting both LF and HV (PIC12HV1552) variants. The 32 MHz operation is achieved via the internal oscillator or an external crystal, and the device supports in-circuit serial programming (ICSP). Technically, the PIC12LF1552 implements Microchip's enhanced mid-range 8-bit core with a 14-bit instruction word, 16-level hardware stack with overflow/underflow reset, automatic interrupt context saving, and direct/indirect/relative addressing modes. The on-chip peripherals are mapped through Peripheral Pin Select (PPS)-like fixed mappings, and the device integrates a temperature indicator, eeprom emulation in flash, and low-power sleep modes typical of the PIC12F family. Typical applications include capacitive touch buttons, sliders and proximity sensors, low-cost remote controls, LED lighting controllers, battery-powered sensor nodes, and small home-appliance user interfaces. The combination of low pin count (8-pin), low voltage operation, mTouch peripheral support, and small Flash footprint makes it ideal for replacing electromechanical switches with solid-state touch interfaces. When designing with this device, ensure decoupling capacitors (100 nF and 10 uF) are placed close to VDD, follow Microchip's mTouch layout guidelines for touch electrodes, and verify supply ramp timing for brown-out reset behavior. Programming can be performed via ICSP using Microchip's MPLAB X IDE and PICkit programmers. This page synthesizes distributor pricing, same-package drop-in alternatives, and practical design notes drawn from Microchip's published PIC12LF1552 datasheet, complementing the standard datasheet content with engineer-focused selection guidance.

RFQ যোগাযোগ
PIC12LF1571-E/P - 8-Bit MCU, 1.75KB Flash, 32MHz, 16-bit PWM | Microchip
PIC12LF1571-E/P

PIC12LF1571-E/P - 8-Bit MCU, 1.75KB Flash, 32MHz, 16-bit PWM | Microchip

The Microchip Technology PIC12LF1571-E/P is an 8-bit RISC microcontroller from the PIC12F family, delivering 32MHz CPU performance with 1.75KB (1K x 14) of Flash program memory, 128 bytes of SRAM, and an integrated 16-bit PWM peripheral. Packaged in an 8-pin PDIP through-hole format, the device operates from a low 1.8V to 3.6V supply, making it suited to battery-backed and energy-harvesting designs. Core independent peripherals include a 4-channel 10-bit ADC, a 5-bit DAC, a comparator, and three 16-bit PWMs with independent timers, enabling high-resolution control without taxing the CPU. An 8-bit microcontroller (MCU) is a small computer-on-a-chip built around an 8-bit data path, integrating a CPU, non-volatile program memory, working RAM, and a set of digital and analog peripherals. Microcontrollers sit in the broader embedded semiconductor hierarchy between discrete logic and full microprocessors: simpler than application processors, more capable than logic ICs. The PIC12LF1571 belongs to Microchip's PIC10/12/16 baseline and mid-range families, all using a Harvard RISC core optimized for deterministic interrupt response and ultra-low static power consumption. Key differentiating features include three independent 16-bit PWMs (vs. the typical 10-bit PWM on baseline PIC devices), a 5-bit DAC reference for analog set-point generation, and on-board Core Independent Peripherals (CIPs) such as the Complementary Waveform Generator (CWG) and Numerically Controlled Oscillator (NCO). These offload timing-critical tasks from the CPU, freeing cycles for application code. The 32MHz internal oscillator eliminates external crystal cost in many designs, while the 8-pin PDIP footprint suits breadboard and through-hole prototyping where SMD soldering is inconvenient. Typical applications include high-resolution LED lighting and color mixing, stepper motor and DC motor control via the 16-bit PWM, compact switch-mode power supply controllers, general-purpose timer replacement, and analog signal conditioning using the DAC and comparator pair. Industrial sensor signal chains also benefit from the 4-channel 10-bit ADC. When designing with this part, mind the 1.8V minimum VDD: connecting 5V logic directly to any I/O pin will exceed absolute-maximum ratings and require a level translator. The E suffix denotes the -40C to +125C extended operating temperature range suitable for industrial and automotive under-hood environments.

RFQ যোগাযোগ
PIC12LF1571-E/SN - 8-Bit 32MHz MCU, 1.75KB FLASH, 8-SOIC | Microchip
PIC12LF1571-E/SN

PIC12LF1571-E/SN - 8-Bit 32MHz MCU, 1.75KB FLASH, 8-SOIC | Microchip

The Microchip PIC12LF1571-E/SN is an 8-bit PIC microcontroller from the PIC12F family running at 32 MHz, integrating 1.75 KB (1K x 14) of FLASH program memory, 128 bytes of SRAM, and 64 bytes of EEPROM, packaged in an 8-pin SOIC. The 'LF' variant operates from a wide 1.8V to 3.6V supply, targeting ultra-low-power embedded applications. The '-E' suffix indicates the extended -40C to +125C industrial/automotive operating temperature range, while '/SN' denotes the 8-SOIC (3.9 mm / 0.15 in) package supplied in tubes. A microcontroller (MCU) is an integrated circuit that combines a CPU core, program memory, data memory, and programmable peripherals into a single chip. The PIC12 family sits at the entry point of the 8-bit PIC architecture tree (PIC10/12/16/18), optimized for small-pin-count, low-cost designs. Within the broader taxonomy, an MCU is a type of microprocessor (MPU) -> central processing unit -> semiconductor IC. The LF prefix indicates the wide-Vdd, low-power process variant, distinguishing it from the standard F-series parts that run only at higher supply voltages. Key features of the PIC12LF1571 include three independent 16-bit PWMs with dedicated timers, ideal for high-resolution control tasks, plus a 10-bit ADC, a 5-bit DAC, an analog comparator, and the CWG (Complementary Waveform Generator) peripheral. The device also provides enhanced peripherals such as the Configurable Logic Cell (CLC) and the Numerically Controlled Oscillator (NCO) for frequency synthesis. The peripheral set supports applications ranging from LED lighting and motor control to general-purpose digital and analog signal conditioning. Architecturally, the PIC12LF1571 uses the enhanced mid-range PIC core with a 14-bit instruction word and a modified Harvard bus structure, providing deterministic instruction timing. The 32 MHz internal oscillator (with PLL multiplier from a 16 MHz source) yields a 125 ns instruction cycle, while the 16-bit PWM resolution at the slowest selectable clock allows sub-microsecond timing precision. On-chip peripherals are routed through the peripheral pin select (PPS) limited set, simplifying PCB layout compared to fixed-function MCUs. Typical applications include high-resolution LED lighting and color mixing, stepper motor and DC-motor control loops, low-cost switch-mode power supply controllers, ceiling-fan and small appliance control, and general-purpose sensor interfaces. The small 8-SOIC footprint and LF low-voltage operation also suit battery-powered IoT sensor nodes, wearables, and remote controls where board area and quiescent current are at a premium. When designing with this device, budget for at least 2.0V rail headroom if using the analog comparator or ADC at full speed, and select the 8 MHz HFINTOSC mode when EMC compliance demands lower switching harmonics. For new designs, prefer the PIC12LF1572 (same family with more peripherals and pins) when additional timers are required, or the PIC16F1xxx family when migrating to a 16-bit PWM core is desirable. This page synthesizes distributor pricing from DigiKey and Mouser, parametric drop-in alternatives verified against the Microchip datasheet (40001723D), and practical design notes covering oscillator selection and PWM output filtering that are not consolidated in the manufacturer datasheet.

RFQ যোগাযোগ
PIC12LF1571-I/MF - 8-Bit MCU, 32MHz, 1.75KB Flash | Microchip
PIC12LF1571-I/MF

PIC12LF1571-I/MF - 8-Bit MCU, 32MHz, 1.75KB Flash | Microchip

The Microchip Technology PIC12LF1571-I/MF is an 8-bit PIC microcontroller with 32 MHz CPU speed, 1.75 KB (1K x 14) Flash program memory and 128 bytes of RAM, housed in an 8-pin DFN (3x3 mm) package with exposed pad. It is a member of the PIC12(L)F1571 family that combines three independent 16-bit PWMs with on-chip analog peripherals for high-resolution control applications. A microcontroller (MCU) is a single-chip computer containing a CPU core, non-volatile program memory, working RAM, and a mix of analog and digital peripherals. PIC12F-series MCUs from Microchip use a RISC architecture optimized for deterministic, low-latency control loops with low active and sleep current. PIC12LF variants add an 'L' suffix for the low-voltage (1.8 V to 3.6 V) operating range, which extends battery life in portable designs. Key features of the PIC12LF1571-I/MF include three 16-bit PWMs with independent timers for high-resolution outputs, a 10-bit ADC with computation, on-chip comparators, and an internal configurable logic cell (CLC). The device operates from 1.8 V to 3.6 V supply, supports eXtreme Low Power (XLP) sleep currents down to the nA range, and provides in-circuit serial programming (ICSP) for field upgrades. The 8-pin DFN package exposes a thermal pad that must be soldered to the PCB ground plane for both electrical grounding and thermal dissipation. The architecture is built around a 14-bit instruction word with a single accumulator and hardware stack, prioritizing deterministic interrupt latency over raw throughput. Typical applications for this device include LED lighting and color-mixing control, stepper motor drivers, power-conversion feedback loops, and compact sensor nodes in IoT edge devices where the small 3x3 mm footprint is required. When designing with this MCU, place a 100 nF decoupling capacitor close to VDD and tie the exposed pad to a clean ground pour. Ensure ICSP programming lines (ICSPCLK/ICSPDAT) are accessible on the PCB for in-circuit programming. This page consolidates distributor pricing, drop-in alternatives, and design considerations drawn from multiple sources, delivering practical engineering context beyond what is found in the manufacturer datasheet.

RFQ যোগাযোগ
PIC12LF1571T-I/MF - 8-bit MCU 32MHz 1.75KB Flash 8-DFN | Microchip
PIC12LF1571T-I/MF

PIC12LF1571T-I/MF - 8-bit MCU 32MHz 1.75KB Flash 8-DFN | Microchip

The Microchip Technology PIC12LF1571T-I/MF is an 8-bit PIC12 microcontroller with 1.75 KB (1K x 14) Flash program memory, 128 bytes SRAM, and 6 I/O pins, operating at up to 32 MHz in a compact 8-pin DFN (3x3 mm) package with exposed pad. The device integrates three independent 16-bit PWMs, a 10-bit ADC, a 5-bit DAC, a comparator, and a Configurable Logic Cell (CLC) / Complementary Waveform Generator (CWG), enabling direct synthesis of mixed-signal waveforms without external components. Tape-and-reel ('T') and 'I' industrial temperature grade (-40C to +85C) make the part designed for volume production. A PIC microcontroller is a low-power, Harvard-architecture 8-bit RISC processor family developed by Microchip Technology that combines CPU core, Flash program memory, SRAM, EEPROM, and configurable peripherals on a single die. The PIC12 sub-family is the 'baseline + mid-range' ultra-small-footprint line: PIC12F/12LF parts target 6-20 pin packages with 0.5-2 KB Flash, used where PCB area and BOM cost matter more than raw CPU throughput. The PIC12LF variants are the low-voltage ('L') family, capable of operating down to 1.8V, while standard PIC12F devices operate from 2.0V. Within this taxonomy, PIC12F1571 is the next-generation 'enhanced mid-range' part that supersedes older PIC12F615/617/609 devices. Key features include 32 MHz maximum CPU clock (8 MHz internal oscillator), three 16-bit PWM channels with independent timers (suitable for high-resolution LED lighting and stepper motor control), 4-channel 10-bit ADC, one 5-bit DAC, one comparator, and on-chip CWG that can generate complementary, dead-band-controlled signals for half-bridge drivers. The 8-DFN package has a thermal pad that must be soldered to the PCB ground pour for proper thermal dissipation at 32 MHz operation. Architecture is the Microchip enhanced mid-range 8-bit core with 49 instructions, single-cycle execution (except branches), 16-level hardware stack, and a separate 14-bit instruction word. The 1.75 KB self-programmable Flash supports in-circuit serial programming (ICSP) via two pins, enabling firmware updates after PCB assembly. The device includes an internal 16 MHz HFINTOSC with +/- 2% typical accuracy, eliminating external crystals in cost-sensitive designs. Typical applications include high-density LED lighting controllers (RGB, RGBA, and decorative strands), stepper motor microstepping drivers, switching power supply PWM controllers, ceiling-fan and small-bldc motor controllers, e-bike and small-EV lighting, and battery-powered IoT sensor nodes. The combination of 16-bit PWM, CWG, and 5-bit DAC is unusual for an 8-pin device and gives this part a unique position in cost-constrained analog-front-end designs. When designing, note that the 8-DFN (3x3 mm) package requires a PCB land pattern with an exposed thermal pad that MUST be soldered to a grounded copper pour - skipped thermal pads cause 25-30 C/W higher junction-to-ambient thermal resistance and can lead to erratic oscillator behavior. The ICSP programming pins (ICSPCLK/ICSPDAT) are multiplexed with GPIO; the configuration bits must be set correctly to disable the MCLR pin or enable internal weak pull-ups if MCLR is unused. This page synthesizes distributor pricing, verified same-family drop-in alternatives, and PCB layout notes not found in the manufacturer datasheet, providing a complete sourcing and engineering reference for the PIC12LF1571T-I/MF.

RFQ যোগাযোগ