MAX1480BEPI+ vs MAX1480ECCPI+ তুলনা

. বিস্তৃত সাথে-সাথে তুলনা MAX1480BEPI+ নির্দিষ্ট Maxim Integrated ও MAX1480ECCPI+ নির্দিষ্ট Analog Devices. প্রধান বিশেষত্ব, বৈদ্যুতিক প্রাকৃতিক, প্যাকেজিং, জীবনচক্র অবস্থা, মূল্যাঙ্কন, ও পরিসীমা কোন অপশনটির কেন্দ্রীয় নির্ধারণ করুন

Maxim Integrated
MAX1480BEPI+ MAX1480BEPI+ - 250kbps Isolated RS-485/RS-422 | Maxim

MAX1480BEPI+ - 250kbps Isolated RS-485/RS-422 | Maxim

MAX1480BEPI+ ✓ সক্রিয়
Analog Devices
MAX1480ECCPI+ MAX1480ECCPI+ - Isolated RS-485/RS-422 Transceiver | Analog Devices

MAX1480ECCPI+ - Isolated RS-485/RS-422 Transceiver | Analog Devices

MAX1480ECCPI+ ✓ সক্রিয়

বিশিষ্টতা তুলনা

পারামিটার MAX1480BEPI+ MAX1480ECCPI+
ব্র্যান্ড Maxim Integrated Analog Devices
ক্যাটাগরি Interface ICs Interface ICs
লাইফসাইকেল স্ট্যাটাস সক্রিয় সক্রিয়
Product Type Complete electrically isolated RS-485/RS-422 data interface Isolated RS-485/RS-422 transceiver
Transceiver Configuration 1 driver / 1 receiver 1/1 half-duplex transceiver
Duplex Mode Half-duplex —
Supported Protocols RS-422 and RS-485 —
ডেটা রেট 250 kb/s [DATA_NEEDED: maximum data rate]
Isolation Electrically isolated —
Driver Slew Rate Reduced-slew-rate driver —
Receiver Hysteresis 70 mV —
Supply Architecture Single +5 V supply on logic side powers both sides —
প্যাকেজ 28-pin PDIP PDIP-28, 28 pins
প্যাকেজ / কেস 28-DIP (0.600 inch, 15.24 mm) —
মাউন্টিং টাইপ Through-hole Through-hole
অপারেটিং তাপমাত্রা 0 °C to +70 °C —
Application Category EMI-sensitive isolated data interfaces —
RoHS [DATA_NEEDED: RoHS status] —
REACH [DATA_NEEDED: REACH status] —
AEC-Q100 [DATA_NEEDED: AEC-Q100 qualification] —
Lead-Free Status [DATA_NEEDED: lead-free status] —
Halogen-Free Status [DATA_NEEDED: halogen-free status] —
Isolation Voltage [DATA_NEEDED: isolation voltage rating] —
Common-Mode Voltage [DATA_NEEDED: common-mode voltage rating] —
Driver Output Current [DATA_NEEDED: driver output current] —
Receiver Input Impedance [DATA_NEEDED: receiver input impedance] —
Number of Drivers — 1 driver
Number of Receivers — 1 receiver
Supported Standards — RS-485 and RS-422
Supply Voltage Range — 4.5 V to 5.5 V
ESD Protection — ±15 kV
Isolation Type — Galvanically isolated data interface
Transmitter Terminations — 5 terminations
Interface Functions — 1 driver and 1 receiver function
Product Designation — MAX1480E
New-Design Recommendation — MAX1480E family recommended for new designs
Isolation withstand Voltage — [DATA_NEEDED: isolation withstand voltage]
অপারেটিং তাপমাত্রার পরিসর — [DATA_NEEDED: operating temperature range]
RoHS স্ট্যাটাস — [DATA_NEEDED: RoHS status]
REACH Status — [DATA_NEEDED: REACH status]

ডেটাসফেইট ও সম্বল

সমস্ত পণ্যগুলি ব্রাউজ করুন BOM তৈরি করুন রিকোয়েস্ট কোয়ুট