MAX211EEAI+ vs MAX211CDBR তুলনা
. বিস্তৃত সাথে-সাথে তুলনা MAX211EEAI+ নির্দিষ্ট Analog Devices ও MAX211CDBR নির্দিষ্ট Texas Instruments. প্রধান বিশেষত্ব, বৈদ্যুতিক প্রাকৃতিক, প্যাকেজিং, জীবনচক্র অবস্থা, মূল্যাঙ্কন, ও পরিসীমা কোন অপশনটির কেন্দ্রীয় নির্ধারণ করুন
Texas Instruments
MAX211CDBR - 120 kbit/s 4/5 RS-232 Transceiver | Texas Instruments (Tape & Reel)
MAX211CDBR ✓ সক্রিয়বিশিষ্টতা তুলনা
| পারামিটার | MAX211EEAI+ | MAX211CDBR |
|---|---|---|
| ব্র্যান্ড | Analog Devices | Texas Instruments |
| ক্যাটাগরি | Interface ICs | Interface ICs |
| লাইফসাইকেল স্ট্যাটাস | সক্রিয় | সক্রিয় |
| Product Type | RS-232 and V.28 transceiver | Multichannel RS-232 line driver/receiver |
| Driver Count | 4 drivers | 4 |
| Receiver Count | 5 receivers | 5 |
| সাপ্লাই ভোল্টেজ | 4.5 V to 5.5 V | 5 V |
| Maximum Data Rate | Greater than 120 kbps | 120 kbit/s |
| RS-232 Output Signal Level | ±5 V | — |
| Standard Compatibility | EIA/TIA-232E and CCITT V.28 | — |
| ESD Protection | ±15 kV HBM | — |
| Charge Pump | Integrated, single +5 V operation | — |
| Logic Output State | TTL tri-state | — |
| প্যাকেজ | 28-pin SSOP | 28-pin SSOP, 5.30 mm width |
| মাউন্টিং টাইপ | Surface mount | Surface mount |
| অপারেটিং তাপমাত্রা | [DATA_NEEDED: operating temperature range] | — |
| সাপ্লাই কারেন্ট | [DATA_NEEDED: supply current] | [DATA_NEEDED: operating supply current] |
| Driver Output Current | [DATA_NEEDED: driver output current] | — |
| RoHS স্ট্যাটাস | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH compliance status] | [DATA_NEEDED: REACH status] |
| Driver Output Swing | — | ±9 V |
| RS-232 Bus Pin ESD Protection | — | ±15 kV, human-body model |
| Standards Support | — | TIA/EIA-232-F and ITU V.28 |
| Shutdown Feature | — | Three driver outputs can be placed in shutdown |
| Power-Supply Topology | — | Single 5 V supply with integrated charge-pump circuitry |
| অপারেটিং তাপমাত্রার পরিসর | — | [DATA_NEEDED: operating temperature range] |
| Shutdown Supply Current | — | Low; exact value [DATA_NEEDED: shutdown supply current] |
| Driver Input Logic Levels | — | [DATA_NEEDED: driver input logic thresholds] |
| Receiver Output Logic Levels | — | [DATA_NEEDED: receiver output logic levels] |