MAX3232CSE+ vs ADM232LJRZ তুলনা
. বিস্তৃত সাথে-সাথে তুলনা MAX3232CSE+ নির্দিষ্ট Maxim Integrated ও ADM232LJRZ নির্দিষ্ট Analog Devices. প্রধান বিশেষত্ব, বৈদ্যুতিক প্রাকৃতিক, প্যাকেজিং, জীবনচক্র অবস্থা, মূল্যাঙ্কন, ও পরিসীমা কোন অপশনটির কেন্দ্রীয় নির্ধারণ করুন
Analog Devices
ADM232LJRZ - 2/2 RS-232 Transceiver, 5V, 120kbps | Analog Devices
ADM232LJRZ ✓ সক্রিয়বিশিষ্টতা তুলনা
| পারামিটার | MAX3232CSE+ | ADM232LJRZ |
|---|---|---|
| ব্র্যান্ড | Maxim Integrated | Analog Devices |
| ক্যাটাগরি | Interface ICs | Interface ICs |
| লাইফসাইকেল স্ট্যাটাস | সক্রিয় | সক্রিয় |
| Device Type | Dual RS-232 transceiver | — |
| Number of Drivers | 2 | — |
| Number of Receivers | 2 | — |
| Supply Voltage Range | 3.0V to 5.5V | 4.5 V to 5.5 V |
| Maximum Data Rate | Up to 1Mbps | 120 kbps |
| Interface Standard | True RS-232 | — |
| Technology | RS-232, CMOS | — |
| Power Class | Low-power | — |
| Charge-Pump Architecture | Dual charge pump | — |
| External Capacitors | Four 0.1uF external capacitors | — |
| অপারেটিং তাপমাত্রার পরিসর | 0C to +70C | [DATA_NEEDED: operating temperature range] |
| প্যাকেজ | 16-SOIC narrow | 16-pin SOIC, 7.50 mm width |
| মাউন্টিং টাইপ | Surface Mount | Surface mount |
| Logic Supply | 3.3V | — |
| Lead-Free Status | Lead-free | [DATA_NEEDED: lead-free status] |
| Data-Rate Guarantee | Up to 1Mbps | — |
| RoHS স্ট্যাটাস | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Transceiver Configuration | — | 2 drivers / 2 receivers |
| ইন্টারফেস টাইপ | — | Full-duplex RS-232 |
| Nominal Supply Voltage | — | 5 V |
| Transmitter Output Swing | — | ±9 V from a 5 V supply |
| Charge-Pump Capacitor Value | — | 1 µF |
| Protocol Compliance | — | EIA-232-E and V.28 |
| Shipping Packaging | — | Tube |
| On-Board DC-to-DC Converter | — | Yes |
| Logic Compatibility | — | CMOS |
| সাপ্লাই কারেন্ট | — | [DATA_NEEDED: supply current] |
| Receiver Input Resistance | — | [DATA_NEEDED: receiver input resistance] |