5M240ZT100A5N - 192-Macrocell MAX V CPLD, 100-TQFP, Automotive | Intel
MPN: 5M240ZT100A5N ✓ সক্রিয়5M240ZT100A5N সারাংশ
What is a CPLD? A Complex Programmable Logic Device is a non-volatile programmable logic IC that bridges the gap between discrete glue logic (74-series gates) and larger FPGAs. CPLDs excel at deterministic, pin-to-pin combinational and registered logic with predictable timing, low static power, and instant-on behavior. They sit within the broader taxonomy of programmable logic devices (PLD), above simple PLAs and PALs but below FPGAs in logic density. The MAX V family targets glue-logic replacement, bus interfacing, I/O expansion, and power-sequencing tasks in cost-sensitive designs.
Key features of the 5M240ZT100A5N include 192 macrocells across 4 logic array blocks (LABs), a 7.5 ns pin-to-pin propagation delay, support for 3.3 V, 2.5 V, 1.8 V, and 1.5 V I/O standards via MultiVolt I/O, and an internal oscillator eliminating the need for external clock circuitry on entry-level designs. The device also offers in-system programmability (ISP) via JTAG, on-chip flash with 100,000 programming cycles endurance, and AEC-Q100 automotive qualification for harsh-environment deployments.
The MAX V architecture combines a low-power CMOS process with non-volatile flash configuration memory, enabling zero-configuration-time boot from a cold start. The MultiVolt core and I/O architecture permit mixed-voltage interfacing between a 1.8 V core and 1.5 V to 3.3 V peripherals without external level shifters, simplifying board design for systems that bridge legacy 3.3 V logic with newer low-voltage ASICs.
Typical applications include automotive body electronics and instrument clusters, industrial control PLCs, I/O expansion for microcontrollers, glue-logic consolidation, power-supply sequencing controllers, and bus-bridging between SPI, I2C, UART, and parallel buses. Designers frequently select the 5M240ZT100A5N for cost-sensitive, deterministic glue logic where FPGA overkill is undesirable.
When designing with this part, ensure that VCCINT (1.8 V) is supplied from a low-noise LDO and that JTAG chain integrity is preserved through proper TMS, TDI, TDO, and TCK pull-ups. The 100-pin TQFP package has a moderate thermal footprint suitable for industrial temperature operation; use thermal vias under the exposed pad for improved heat spreading in enclosed automotive housings.
This page synthesizes distributor pricing from Mouser/DigiKey/Octopart, automotive-grade same-brand drop-in alternatives from the MAX V family, and practical design notes not consolidated on the manufacturer product page.
এর জন্য ড্রপ-ইন বিকল্প 5M240ZT100A5N — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই সিরিজের ভ্যারিয়েন্ট
একই সিরিজের মডেল যেগুলো drop-in compatible 5M240ZT100A5N (একই form factor এবং footprint) — পার্থক্য রয়েছে Configuration Memory, Package, Programming Interface, Operating Temperature, Maximum Internal Frequency.
5M240ZT100C5N
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →5M240ZT100I5N
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়মূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →5M160ZT100A5N
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়মূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →5M1270ZT100A5N
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
EPM570T100A5N
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →5M240ZT100A5N সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Family | MAX V |
| Device Logic Elements | 240 LE |
| Number of Macrocells | 192 |
| Number of I/O Pins | 79 |
| Number of Logic Array Blocks (LABs) | 4 |
| Propagation Delay (tPD) | 7.5 ns |
| Internal Operating Frequency | 118.3 MHz |
| Programmable Type | In System Programmable |
| Configuration Memory | Non-volatile flash |
| Core Voltage (VCCINT) | 1.8 V |
| I/O Voltage Standards | 1.5 V / 1.8 V / 2.5 V / 3.3 V (MultiVolt) |
| সাপ্লাই ভোল্টেজ | 1.8 V |
| Operating Temperature Grade | Automotive AEC-Q100 |
| প্যাকেজ | 100-pin TQFP |
| মাউন্টিং টাইপ | Surface Mount |
| RoHS স্ট্যাটাস | Compliant |
| Lead-Free Status | Vendor Undefined (per distributor catalog) |
| Programming Interface | JTAG (IEEE 1149.1) |
5M240ZT100A5N 100-pin tqfp পিন কনফিগারেশন গাইড
5M240ZT100A5N (100-pin tqfp প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি 5M240ZT100A5N.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
5M240ZT100A5N এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Automotive Body Electronics, Instrument Cluster Display Control, Industrial PLC I/O Expansion, Power-Supply Sequencing Controller, Bus Bridging and Protocol Translation, Glue-Logic Consolidation.
Automotive Body Electronics
The 5M240ZT100A5N's AEC-Q100 qualification and 192 macrocells make it well-suited for automotive body modules such as central body controllers, door modules, and seat controllers. The 100-TQFP package exposes 79 user I/Os that fan out to LEDs, relays, and switch inputs, while the deterministic 7.5 ns pin-to-pin delay supports time-critical PWM generation for motor control. Compared to MCU-only solutions, the CPLD offloads glue logic and runs from a 1.8 V core with MultiVolt I/O, bridging 3.3 V sensors and 1.8 V MCUs without external level shifters. The non-volatile flash configuration provides instant-on behavior critical for body controllers that must wake and respond within milliseconds.
সুপারিশকৃত
Instrument Cluster Display Control
Instrument clusters require deterministic multi-channel PWM for gauge backlights, telltale indicators, and stepper-motor-driven pointers. The 5M240ZT100A5N delivers 192 macrocells that implement multiple PWM channels, watchdog timers, and CAN/LIN message filtering in a single chip. Its 118.3 MHz internal frequency enables high-resolution duty-cycle control without jitter, and the AEC-Q100 grade supports under-hood thermal stress. Unlike MCUs that need RTOS scheduling, the CPLD's parallel hardware execution guarantees sub-microsecond response to cluster fault conditions, which is essential for ISO 26262 functional-safety architectures. MultiVolt I/O interfaces directly to 3.3 V LED drivers and 1.8 V SoC clusters.
সুপারিশকৃত
Industrial PLC I/O Expansion
Factory-automation PLCs frequently need additional digital I/O that exceeds the host MCU's pin count. The 5M240ZT100A5N's 79 user I/Os expand a single MCU bus into dozens of opto-isolated inputs and relay-driver outputs while implementing de-bounce, edge detection, and pulse-stretch logic in hardware. The 7.5 ns propagation delay supports high-speed counter inputs for encoder feedback up to several hundred kHz. Industrial temperature variants of the same MAX V family operate from -40C to +100C, suitable for cabinet-mounted controls. Compared to a discrete 74-series implementation, the CPLD reduces PCB area by 70% and eliminates sourcing issues across multiple logic-gate part numbers.
সুপারিশকৃত
Power-Supply Sequencing Controller
Multi-rail systems (FPGA + DDR + ASIC + analog) require precise power-up and power-down sequencing to prevent latch-up and in-rush damage. The 5M240ZT100A5N implements voltage-monitoring comparators, delay timers, and PG (power-good) fan-out logic across its 192 macrocells, replacing discrete supervisor ICs and 555 timers. Its non-volatile configuration means the sequencing script is loaded instantly at cold-start, with no firmware boot delay. The device accepts 1.8 V to 3.3 V inputs through MultiVolt I/O banks, monitoring each rail directly without external level translation. PG signals are AND/OR-combined and re-driven with programmable output delays.
সুপারিশকৃত
Bus Bridging and Protocol Translation
Legacy systems often require bridges between SPI, I2C, UART, and parallel buses that MCUs cannot service concurrently without real-time overhead. The 5M240ZT100A5N's 192 macrocells implement state machines for SPI-to-parallel, I2C-to-GPIO, and UART multiplexing translations at line speeds up to several MHz. The 7.5 ns propagation delay preserves signal timing across bridge operations, and MultiVolt I/O permits direct interfacing between 1.8 V and 3.3 V domains. Hardware-based bridges eliminate firmware race conditions and operate deterministically under interrupt load, which is critical in industrial and automotive gateways where latency spikes cause protocol timeouts.
সুপারিশকৃত
Glue-Logic Consolidation
Modern PCB designs frequently contain 5-15 discrete 74-series logic gates (AND, OR, XOR, flip-flops) scattered across signal-conditioning paths. The 5M240ZT100A5N replaces these with a single 100-TQFP CPLD implementing identical boolean functions in 192 macrocells. This consolidation reduces PCB area by 60-80%, eliminates multiple BOM line items, and simplifies routing. The CPLD's non-volatile flash configuration is field-updatable via JTAG, allowing late-stage logic fixes without respinning the board. MultiVolt I/O permits mixed 1.8 V/2.5 V/3.3 V interfacing across legacy and modern logic, with 7.5 ns timing preserved across all bank voltages.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা 5M240ZT100A5N — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | 5M240ZT100C5N | 5M240ZT100I5N | 5M160ZT100A5N | EPM570T100A5N |
|---|---|---|---|---|---|
| Brand | Intel (formerly Altera) | Intel (formerly Altera) | Intel (formerly Altera) | Intel (formerly Altera) | Intel (formerly Altera) |
| Package | TQFP-100 (100-pin TQFP) | TQFP-100 - same | TQFP-100 - same | TQFP-100 - same | TQFP-100 - same |
| Family | MAX V | MAX V | MAX V | MAX V | MAX II (predecessor) |
| Number of Macrocells | 192 | 192 | 192 | 160 (-17%) | 440 (+129%) |
| Propagation Delay (tPD) | 7.5 ns | 7.5 ns | 7.5 ns | 7.5 ns | 5.4 ns (faster) |
| Temperature Grade | Automotive AEC-Q100 (-40C to +125C) | Commercial (0C to +85C) | Industrial (-40C to +100C) | Automotive AEC-Q100 | Automotive AEC-Q100 |
| User I/O Count | 79 | 79 | 79 | 79 | 76 |
| Core Voltage | 1.8 V | 1.8 V | 1.8 V | 1.8 V | 1.8 V |
মূল পার্থক্যসমূহ
- Automotive AEC-Q100 qualification with MAX V non-volatile flash (বনাম5M240ZT100C5N)
- Higher macrocell density at same footprint (বনাম5M160ZT100A5N)
- Newer MAX V architecture with lower power (বনামEPM570T100A5N (MAX II predecessor))
ডিজাইন নোট
The 5M240ZT100A5N requires a clean 1.8 V supply on VCCINT derived from a low-noise LDO. Estimated: with VCCIO banks at 3.3 V drawing typical ICCIO of approximately 10 mA and VCCINT core current around 15-30 mA depending on utilization, the LDO must source at least 50 mA with sub-50 mV ripple to prevent jitter on internal PLLs. Place a 1 uF X7R ceramic decoupling capacitor within 5 mm of each VCC pin and a 10 uF bulk capacitor on the supply rail. Power-supply sequencing is not strictly required, but the VCCINT rail should reach 90% of nominal within 10 ms of VCCIO to ensure clean flash configuration read.
Route JTAG signals (TCK, TMS, TDI, TDO) as a daisy-chained group with stub lengths under 25 mm and 10 kohm pull-ups on TMS, TDI, and TCK per IEEE 1149.1 recommendations. Keep JTAG traces at least 3 mm away from switching signals above 50 MHz to avoid coupling during in-system programming. For 100-pin TQFP, use a 4-layer PCB with continuous ground plane beneath the device to provide low-impedance return paths; route all I/O signals on outer layers and stitch the inner ground plane with vias around the package perimeter. Thermal vias under the package center improve heat spreading for automotive AEC-Q100 thermal-cycling compliance.
Common pitfalls when designing with the 5M240ZT100A5N include: (1) Mixing VCCIO bank voltages without isolating each bank to a single voltage - this can damage I/O buffers; (2) Forgetting that the device requires in-system programming via JTAG and cannot self-program from external flash; (3) Using the wrong temperature grade - the A5N suffix denotes AEC-Q100 automotive grade; substituting commercial or industrial grades in automotive designs fails qualification; (4) Confusing the MAX V 5M240Z with the MAX II 5M240ZE or MAX 7000 5M240Z devices - all share similar prefixes but have different architectures and toolchains.
For high-speed I/O operation above 100 MHz, maintain 50-ohm characteristic impedance on TQFP breakout traces and avoid via stubs longer than 1.5 mm. MultiVolt I/O banks are independent - keep analog and digital return paths separated to avoid ground bounce coupling into the 1.8 V core. The 7.5 ns pin-to-pin delay budget assumes light loading (< 25 pF per output); for heavily loaded buses, add series damping resistors (22-33 ohm) near the CPLD output to control edge rates and reduce simultaneous switching noise (SSN) on adjacent pins.
কমপ্লায়েন্স তথ্য
RoHS compliant per distributor catalog. AEC-Q100 qualified (automotive temperature grade -40C to +125C) per 'A' suffix in MPN. Lead-free status marked Vendor Undefined by distributor; Intel MAX V family is generally lead-free but this specific catalog entry does not confirm - verify with manufacturer datasheet before Pb-free assembly requirements.