A3P030-1QNG48 - 30K Gate ProASIC3 FPGA | Microchip Technology
MPN: A3P030-1QNG48 ✓ সক্রিয়A3P030-1QNG48 সারাংশ
A ProASIC3 FPGA is a reprogrammable semiconductor device that combines configurable logic, embedded memory, and user-programmable I/O in one package. It belongs to the FPGA and CPLD family, within programmable logic devices and the broader semiconductor hierarchy. The A3P030 provides a small-footprint implementation for designs that need deterministic hardware logic without developing a custom ASIC.
Key features include 30,000 system gates, 768 logic cells, 34 user I/O, and a listed operating frequency of 272 MHz. The device uses flash-based CMOS configuration memory and a 130 nm process with seven metal layers, including six copper layers. The 48-VFQFN exposed-pad package is surface mountable and is supplied in a tray according to the product listing.
The ProASIC3 architecture is intended for low- and ultra-low-density FPGA applications where reprogrammability, compact packaging, and system integration are more important than very large logic capacity. The A3P030 supports designs using the manufacturer's programmable logic development flow for configuration, simulation, and programming. The available product information identifies 34 user I/O and a 48-pin package, allowing board designers to plan pin assignment and PCB escape routing before finalizing the layout.
Typical applications include industrial control, interface adaptation, protocol bridging, sensor conditioning, and embedded automation. The 34-I/O count is useful for parallel digital interfaces, status indicators, control signals, and multi-channel logic functions. The 272 MHz listed speed supports higher-clocked control logic and signal-processing blocks when the design timing, I/O standards, and power conditions are appropriate.
The principal design consideration is PCB implementation of a fine-pitch VFQFN with an exposed pad. Follow the manufacturer package drawing for pad geometry, solder mask, paste, and exposed-pad thermal construction. Confirm the device's supported I/O voltage, configuration interface, and power-supply sequencing requirements against the manufacturer datasheet before release to production.
This product page combines the A3P030 family specifications, package and lifecycle information, sourcing details, compatible same-family references, and practical implementation guidance. It is intended to help engineers evaluate whether the A3P030-1QNG48 provides sufficient logic, I/O, speed, and package density for a compact programmable-logic design.
এর জন্য ড্রপ-ইন বিকল্প A3P030-1QNG48 — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই সিরিজের ভ্যারিয়েন্ট
একই সিরিজের মডেল যেগুলো drop-in compatible A3P030-1QNG48 (একই form factor এবং footprint) — পার্থক্য রয়েছে Package, Process Technology, RoHS Status, System Gates.
A3P030-QNG48I
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →A3P030-1QNG48I
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
A3P030-1QNG48 সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Device Type | ProASIC3 field-programmable gate array (FPGA) |
| System Gates | 30,000 gates |
| Logic Cells | 768 logic cells |
| User I/O | 34 I/O |
| Maximum Listed Frequency | 272 MHz |
| Core Supply Voltage | 1.5 V |
| Logic Family | CMOS |
| Configuration Memory | Flash-based configuration memory |
| Process Technology | 130 nm |
| Metal Layers | 7 layers |
| Copper Layers | 6 copper layers |
| প্যাকেজ | 48-pin VFQFN exposed-pad package |
| Package Size | 8 x 8 mm |
| Package Height | 0.90 mm |
| Package Pitch | 0.40 mm |
| মাউন্টিং টাইপ | Surface mount |
| Packaging | Tray |
| RoHS স্ট্যাটাস | ROHS3 compliant |
| লাইফসাইকেল স্ট্যাটাস | Active |
| Manufacturer Lead Time | 12 weeks |
| Minimum Order Quantity | 1 piece |
A3P030-1QNG48 0.40 mm পিন কনফিগারেশন গাইড
A3P030-1QNG48 (0.40 mm প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি A3P030-1QNG48.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
A3P030-1QNG48 এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial control and automation, Protocol and interface bridging, Sensor signal conditioning, Programmable logic timing, Communication equipment support logic, Embedded system glue logic.
Industrial control and automation
The A3P030-1QNG48 fits compact industrial control blocks that combine parallel digital logic, status handling, and programmable timing. Its 30,000 system gates and 768 logic cells provide room for control state machines, condition monitoring, and peripheral arbitration, while 34 user I/O supports sensors, actuators, interlocks, and communication interfaces. The 272 MHz listed operating frequency is useful where the design contains clocked control logic rather than only slow discrete functions. Because the device is programmed in flash and delivered in a small 48-VFQFN exposed-pad package, it can support field updates and repeatable product behavior without a custom ASIC. Final industrial qualification should verify temperature limits, isolation boundaries, EMC performance, and the regulator scheme used for the 1.5 V core.
সুপারিশকৃত
Protocol and interface bridging
The A3P030-1QNG48 is appropriate for small protocol converters, level-independent digital logic, and interface adapters where fixed function logic would be less flexible. Thirty-four user I/O allow multiple parallel data paths, chip-select signals, and handshake controls to be implemented in one programmable device. The 768 logic cells and 30,000 system gates support protocol state machines, data-width conversion, and timing qualifiers. At a listed 272 MHz, the FPGA can implement clocked interface logic, but actual throughput remains governed by the selected I/O standard, board-level timing, and the design's critical-path margins. Engineers should use the official pin table to assign configuration, power, and I/O resources and should reserve adequate PCB escape routing for the 0.40 mm-pitch VFQFN package.
সুপারিশকৃত
Sensor signal conditioning
The A3P030-1QNG48 can implement programmable digital conditioning between sensors and a controller, including sampling sequencing, threshold logic, filtering, calibration tables, and fault flags. Flash-based configuration allows the same board to support multiple sensor arrangements or firmware revisions, while 34 I/O provide connections to digital sensors, switches, and synchronization signals. The device's 272 MHz listed speed is more than sufficient for many parallel acquisition paths, although analog conditioning still requires suitable amplifiers and converters. Use the FPGA for deterministic digital processing while preserving clean separation between sensitive analog circuitry and programmable logic. Layout should minimize clock and data crosstalk, follow the exposed-pad thermal recommendation, and provide stable, decoupled supply rails according to the manufacturer guidance.
সুপারিশকৃত
Programmable logic timing
The A3P030-1QNG48 is useful for designs requiring deterministic programmable logic rather than a fixed microcontroller peripheral set. It can implement counters, pulse generators, delay lines, clock dividers, sequencers, and custom timing relationships while providing 30,000 system gates and 34 I/O. The 272 MHz listed operating frequency gives designers a clear target for synchronous logic closure, while the flash-based configuration supports repeatable startup behavior and field reprogrammability. For motor excitation, test sequencing, or instrumentation timing, pair the FPGA outputs with appropriate drivers rather than driving loads directly. Confirm every output's voltage, drive strength, and timing constraints in the manufacturer electrical tables, and account for clock jitter and board skew when the application depends on precise edge placement.
সুপারিশকৃত
Communication equipment support logic
The A3P030-1QNG48 can support communication equipment with small-format line-card control, channel arbitration, framing logic, and supervisory functions. Its reprogrammable architecture lets designers implement protocol-specific behavior without occupying a larger FPGA, while 34 I/O and a compact 8 x 8 mm package help optimize board density. The 1.5 V core and flash-based CMOS implementation make it appropriate for modern embedded systems, but high-speed external interfaces may require separate PHY devices. Use the FPGA for control-plane and data-plane adaptation logic that fits 768 logic cells, then validate signal integrity at the board edge. The package's exposed pad should be connected according to the manufacturer thermal and layout guidance, and supply decoupling should be placed close to the device.
সুপারিশকৃত
Embedded system glue logic
The A3P030-1QNG48 is well suited to glue logic that connects memories, sensors, converters, and mixed-signal blocks in a compact embedded product. Engineers can implement address decoding, FIFO-like buffering, interrupt routing, latch functions, and peripheral sequencing in flash-programmable logic without dedicating a full microcontroller or ASIC. Its 30,000-system-gate capacity and 34 user I/O cover many moderate-complexity integrations, while the 272 MHz listed rate supports clocked pipelines when required. The principal constraint is resource planning: configuration pins, power pins, dedicated I/O, and the exposed pad must be assigned from the official package documentation. Before layout release, perform static timing analysis and verify that all selected I/O standards are compatible with the intended 1.5 V-based power architecture.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা A3P030-1QNG48 — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | A3P030-QNG48I | A3P030-1QNG48I |
|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 48-VFQFN Exposed Pad | 48-pin QFN EP | 48-VFQFN Exposed Pad |
| Device Family | ProASIC3 | ProASIC3 | ProASIC3 |
| System Gates | 30,000 gates | 30,000 gates | 30,000 gates |
| Logic Cells | 768 logic cells | 768 logic cells | 768 logic cells |
| User I/O | 34 I/O | 34 I/O | 34 I/O |
| Listed Operating Frequency | 272 MHz | 231 MHz | 272 MHz |
| Core Supply Voltage | 1.5 V | 1.5 V | 1.5 V |
| Configuration Memory | Flash-based | Flash-based | Flash-based |
মূল পার্থক্যসমূহ
- Higher listed operating frequency (বনামA3P030-QNG48I)
- Identified same-base temperature-grade option (বনামA3P030-1QNG48I)
- Compact programmable integration (বনামA3P030-QNG48I)
ডিজাইন নোট
Use the manufacturer land pattern for the 48-pin VFQFN exposed-pad package, whose listed package dimensions are 8 x 8 mm with a 0.40 mm pitch. Place decoupling capacitors close to the supply and ground pins, and route the exposed pad into the appropriate ground or thermal construction described by the package drawing. Avoid placing high-speed or noisy routing beneath the device where the assembly process and thermal design do not permit it.
Confirm the 1.5 V core supply requirement and every I/O voltage domain against the manufacturer electrical tables before finalizing the power tree. Separate sensitive supply routing from digital current paths and validate the regulator's startup and sequencing behavior. The target is identified as a 1.5 V ProASIC3 device, but the final rail tolerances and I/O operating conditions must be taken from the official datasheet.
Plan configuration pins, user I/O, power, ground, and exposed-pad connections from the official pin-description table rather than from the physical package outline. Keep clocks away from noisy switching nodes, use a continuous ground reference, and match external clock and data traces where timing margin is limited. A 272 MHz listed device still requires practical signal-integrity review of board skew, return paths, connector transitions, and adjacent aggressors.
Do not treat the A3P030-QNG48I as an unconditional substitute for the target. Its listed frequency is 231 MHz, compared with 272 MHz for the A3P030-1QNG48, so timing closure can change even though the QNG48 package family is retained. Re-run timing analysis, verify the temperature-grade suffix against the application, and confirm configuration and electrical pin assignments before releasing a replacement BOM.
কমপ্লায়েন্স তথ্য
The product listing identifies the A3P030-1QNG48 as ROHS3 compliant and active. Other compliance attributes are not confirmed by the available product information.