Analog Devices

AD623ARZ - 800 kHz Rail-to-Rail Instrumentation Amp | Analog Devices

MPN: AD623ARZ ✓ সক্রিয়
2.7 V to 12 V Vdss 25 nA maximum Id 8-SOIC, 0.154 in (3.90 mm) width Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

AD623ARZ সারাংশ

The Analog Devices AD623ARZ is a single-circuit, rail-to-rail-output instrumentation amplifier designed for single- or dual-supply operation from 2.7 V to 12 V, with a gain-bandwidth product of 800 kHz and an 8-SOIC package. It accepts low-level differential sensor signals and produces a single-ended output, making it suitable for bridge, biomedical, and industrial measurement systems.

An instrumentation amplifier is a specialized amplifier optimized for amplifying a differential voltage while rejecting common-mode interference. In the signal-chain hierarchy, the AD623 belongs to the instrumentation-amplifier family of analog amplifier ICs. Its internal design reduces the need to match external resistors closely, improves common-mode rejection, and simplifies systems in which sensor inputs may vary widely in level.

The AD623 supports gains from 1 to 1000 using an external gain-setting resistor. Rail-to-rail output swing maximizes usable output range on low-voltage supplies, while the specified 800 kHz gain-bandwidth product provides useful bandwidth for sensor and industrial measurement signals. Its 8-SOIC package is suitable for conventional surface-mount PCB assembly, while the single amplifier per package supports compact analog front ends.

The AD623 can operate from 2.7 V to 12 V according to the manufacturer product page, and its rail-to-rail output architecture allows the output to approach the available supply range under suitable loading. This makes the device appropriate for low-voltage systems where a fixed, non-rail-to-rail amplifier could waste a substantial portion of the signal range. Gain is programmed with one external resistor, simplifying adjustment across different sensor sensitivities.

Typical uses include Wheatstone bridge measurement, current-shunt monitoring, battery-cell instrumentation, portable medical equipment, and industrial control modules. In a bridge circuit, the differential input captures the imbalance between two sensor arms while the instrumentation amplifier rejects much of the common-mode voltage. The result is a more compact signal-conditioning path than a discrete three-op-amp implementation.

A key design consideration is supply-headroom management: confirm output swing, input common-mode range, and load requirements for the exact gain before finalizing the circuit. Place the gain resistor close to the gain-setting pin and follow the reference circuit shown in the manufacturer datasheet to minimize parasitic sensitivity and preserve the expected performance.

This page combines the AD623ARZ electrical identity, package information, pin-compatible family alternatives, application guidance, and engineering design notes to support faster component selection, schematic review, and PCB planning.

এর জন্য ড্রপ-ইন বিকল্প AD623ARZ — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible AD623ARZ (একই form factor এবং footprint) — পার্থক্য রয়েছে Package, Amplifier Type, Gain Programming, Gain Range, Number of Circuits.

Analog Devices
Package: 8-SOIC (0.154 in, 3.90 mm width)
Amplifier Type: Instrumentation Amplifier
Gain Range: 1 to 1000+
এর সাথে তুলনা করুন AD623ARZ →
Analog Devices
Package: 8-lead SOIC
Amplifier Type: Single-circuit instrumentation amplifier
Gain Programming: Single external gain-set resistor
এর সাথে তুলনা করুন AD623ARZ →

AD623BRZ

✅ ড্রপ-ইন
Analog Devices
📦 8-SOIC
Single-circuit instrumentation amplifier · 1 circuit · 2.7 V to 12 V · Rail-to-rail · Programmable, up to 25 · Single external gain-set resistor · 800 kHz · 0.3 V/µs

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

AD623ARZ সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Product Type Single-circuit instrumentation amplifier
Number of Amplifiers 1 amplifier
Supply Voltage Range 2.7 V to 12 V
Single-Supply Operation Supported
Dual-Supply Operation Supported
Output Swing Rail-to-rail
Gain-Bandwidth Product 800 kHz
Gain Range 1 to 1000
Gain Programming 1 external gain-set resistor
Input Type Differential input
আউটপুট টাইপ Single-ended output
প্যাকেজ 8-SOIC, 0.154 in (3.90 mm) width
মাউন্টিং টাইপ Surface mount
Input Offset Voltage 200 uV maximum
Input Bias Current 25 nA maximum

AD623ARZ 8-soic, 0.154 in (3.90 mm) width পিন কনফিগারেশন গাইড

AD623ARZ (8-soic, 0.154 in (3.90 mm) width প্যাকেজ)-এর পিন কনফিগারেশন। এই অ্যানালগ কম্পোনেন্টে ইনপুট, আউটপুট ও পাওয়ার সাপ্লাই পিন রয়েছে। অফসেট নাল, কম্পেনসেশন ও এনেবল পিন কনফিগারেশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। সিগন্যাল কন্ডিশনিং ও অ্যামপ্লিফায়ার সার্কিটের জন্য আদর্শ।

AD623ARZ-এর জন্য 8-soic, 0.154 in (3.90 mm) width প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি AD623ARZ.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

AD623ARZ এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Wheatstone Bridge Measurement, Current-Shunt Monitoring, Portable Medical Instrumentation, Battery Cell Monitoring, Industrial Sensor Interface, Portable Test and Measurement.

🏭

Wheatstone Bridge Measurement

The AD623ARZ fits precision bridge front ends because it amplifies the small differential voltage created when a resistive sensor changes resistance while rejecting common-mode excitation voltage. Its differential input architecture reduces the need for closely matched discrete resistors, and its single external gain-setting resistor simplifies adaptation to different bridge sensitivities. The 800 kHz gain-bandwidth product supports responsive measurement of changes in pressure, strain, load, or temperature. Designers should still verify the bridge excitation level against the device input common-mode range and keep the gain resistor close to the designated pin.

⚡

Current-Shunt Monitoring

The AD623ARZ is suitable for monitoring the differential voltage produced by a current-shunt resistor in power-conversion and battery systems. Its differential input reduces sensitivity to ground voltage shifts that can corrupt measurements referenced to a high-current ground plane. The rail-to-rail output can maximize signal utilization on a 2.7 V to 12 V supply, while the 800 kHz gain-bandwidth product permits measurement of current transients rather than only a static average. Layout must route the shunt Kelvin connections directly to the amplifier inputs to avoid shared copper resistance.

💊

Portable Medical Instrumentation

The AD623ARZ can serve as the analog input stage for compact medical or biometric equipment that senses small differential signals from pressure, flow, or bioelectric sensors. Its low-voltage supply range supports battery-powered systems, and the differential architecture helps preserve sensor integrity when common-mode voltage is present. Rail-to-rail output operation increases the usable measurement range in compact equipment where analog headroom is limited. Because medical designs also depend on isolation, leakage, and regulatory requirements, engineers must verify those requirements separately from the amplifier's basic electrical performance.

🔋

Battery Cell Monitoring

The AD623ARZ is applicable to multi-cell monitoring systems that measure small differential voltages around a common cell potential. Differential measurement helps reject the much larger common-mode voltage appearing across a battery stack, while the 2.7 V minimum supply permits operation in compact low-voltage sensing arrangements. The 800 kHz gain-bandwidth product can accommodate faster cell transients when the selected gain leaves sufficient bandwidth. Careful grounding and isolation are essential because cell-monitoring systems can place the amplifier at a substantial potential relative to system ground.

🏭

Industrial Sensor Interface

The AD623ARZ provides a compact interface between low-level industrial sensors and a controller or data converter. It accepts differential sensor outputs, offers user-programmable gain from 1 to 1000, and provides rail-to-rail output operation for downstream conversion. The single external gain resistor simplifies calibration and replacement across a family of sensor ranges. For factory equipment, keep high-current return currents away from the input and gain-resistor paths, and verify the operating temperature, supply noise, and transient immunity against the enclosure environment.

📟

Portable Test and Measurement

The AD623ARZ is useful in handheld or bench instrumentation that must measure weak differential signals while operating from a low-voltage source. Rail-to-rail output swing improves signal utilization in compact displays and converter front ends, and the 800 kHz gain-bandwidth product gives adequate response for many sensor and diagnostic waveforms. Use the B-grade option when offset error would otherwise limit resolution at low signal levels. The amplifier should be paired with careful reference grounding and input filtering to prevent cable noise or sensor excitation from reaching the measurement result.

What is the AD623ARZ?
The AD623ARZ is a single-circuit, rail-to-rail-output instrumentation amplifier from Analog Devices. According to the AD623 manufacturer product page, it operates from a 2.7 V to 12 V supply, accepts differential sensor inputs, and supports single- or dual-supply configurations. The device is packaged in an 8-SOIC and provides an 800 kHz gain-bandwidth product.
What are the key specifications of AD623ARZ that engineers should know?
The AD623ARZ combines a 2.7 V to 12 V supply range, an 800 kHz gain-bandwidth product, and rail-to-rail output operation in an 8-SOIC package. The manufacturer product page also identifies single- and dual-supply capability and user-programmable gain. The AD623 family supports gains from 1 to 1000 using one external gain-setting resistor, while the A-grade device has a maximum input offset voltage of 200 uV.
Where can I download the AD623ARZ datasheet PDF?
The official AD623ARZ datasheet is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/AD623.pdf. The manufacturer document describes the single- and dual-supply, rail-to-rail instrumentation amplifier, including its gain-setting arrangement and electrical characteristics. Use the pin-description table and application diagrams in that document when assigning PCB tracks and selecting external components.
Where can I find the AD623ARZ pinout?
The AD623ARZ pinout is shown in the manufacturer AD623 datasheet and should be assigned from its pin-description table rather than from a generic SOIC diagram. The exact ordering listed for AD623ARZ is an 8-SOIC package, corresponding to package key soic-8. Because the individual pin names are not reproduced in the product-page excerpt, use the official PDF to verify every signal, supply connection, and exposed functional pin before PCB release.
How much bandwidth does the AD623ARZ provide?
The AD623ARZ has an 800 kHz gain-bandwidth product. This specification determines how bandwidth changes as the selected closed-loop gain increases, so the usable signal bandwidth is substantially lower at high gain. The manufacturer AD623 product page and distributor technical listing identify the AD623 family as an 800 kHz instrumentation amplifier. Design the sensor and feedback path around the bandwidth appropriate to the programmed gain rather than treating 800 kHz as a constant signal bandwidth.
Can the AD623ARZ operate from a single supply?
Yes, the AD623ARZ supports single-supply operation as well as dual-supply operation. The Analog Devices product page specifies a 2.7 V to 12 V operating supply range and rail-to-rail output swing. Single-supply operation is useful in portable measurement systems, but the input common-mode range and output swing must remain inside the usable limits for the selected gain and load.
How is the gain set on an AD623ARZ circuit?
The AD623ARZ uses one external gain-setting resistor to program the closed-loop gain, with the AD623 family supporting gains from 1 to 1000. The resistor connects according to the manufacturer reference circuit and determines the relationship between differential input voltage and output voltage. Keep the gain resistor close to its designated pin and follow the datasheet layout guidance to minimize parasitic capacitance and sensitivity.
What is the difference between AD623ARZ and AD623BRZ?
The AD623BRZ is the tighter-tolerance B-grade version of the AD623 family and can replace the AD623ARZ in a compatible 8-SOIC circuit. A published comparison lists maximum input offset voltage of 25 uV for AD623BRZ versus 200 uV for AD623ARZ, and maximum input bias current of 17 nA versus 25 nA. Both devices use the same instrumentation-amplifier function and package, but the B grade offers improved precision.
AD623ARZ vs AD623BRZ: which is better for precision bridge measurement?
The AD623BRZ is generally preferable for precision bridge measurement because its maximum input offset voltage is 25 uV, compared with 200 uV for the AD623ARZ. Its maximum input bias current is also lower at 17 nA versus 25 nA. The AD623ARZ can still meet less demanding accuracy requirements, while the tighter B-grade limits are more useful when small bridge imbalances must be resolved accurately.
When should I choose AD623ARZ over AD623BRZ?
Choose the AD623ARZ when the application does not require the tighter offset-voltage and bias-current limits of the B grade and its operating behavior remains acceptable for the measured signal. Choose AD623BRZ instead when offset error must be minimized, especially for small differential inputs. Both parts use an 8-SOIC package, so the choice primarily depends on required precision rather than a footprint change.
What can replace the AD623ARZ?
The AD623BRZ is the clearest direct replacement because it retains the AD623 instrumentation-amplifier function and 8-SOIC footprint while improving maximum input offset voltage from 200 uV to 25 uV and reducing maximum input bias current from 25 nA to 17 nA. Verify supply, gain, common-mode, output-swing, and layout requirements against the manufacturer datasheet before substituting it into production equipment.
Is AD623ARZ the same as AD623BRZ?
No, they are different grade options within the AD623 family. The AD623ARZ has a published maximum input offset voltage of 200 uV and maximum input bias current of 25 nA, while the AD623BRZ is specified at 25 uV and 17 nA, respectively. They share the 8-SOIC package and instrumentation-amplifier architecture, making the B grade the tighter-precision choice for compatible designs.
What is the best cross-brand equivalent for AD623ARZ?
No cross-brand equivalent can be confirmed as a true drop-in replacement from the published cross-reference excerpt because it does not identify a specific part or package. A valid replacement must match the 8-SOIC footprint, pin functions, 2.7 V to 12 V supply range, gain range, bandwidth, and input/output ranges. Compare the candidate datasheet and footprint before selecting it; use the Request a Quote form on this page to ask about sourcing support for a specific cross-reference.
Where can I buy AD623ARZ online?
Use the Request a Quote form on this page to request AD623ARZ availability, current lead time, and a quotation for the exact 8-SOIC ordering code. The component is identified by distributors as an Analog Devices AD623ARZ instrumentation amplifier in an 8-SOIC package. A written quotation confirms current commercial status, package allocation, and the quantity needed for the production build.
What is the price of AD623ARZ?
The current AD623ARZ quotation is available through the Request a Quote form on this page. Pricing can change with quantity, package allocation, and market conditions, so the form should be used for a current procurement decision rather than relying on an outdated listing. Include the required quantity, target date, and desired shipment destination when requesting the quotation.
What is the lead time for AD623ARZ and is it in stock?
The current AD623ARZ stock position and lead time should be confirmed through the Request a Quote form on this page. Distributor listings identify the AD623ARZ as available for ordering, but availability can vary by package code and quantity. Submit the required quantity and production schedule so the supplier can confirm current inventory, manufacturing allocation, and the applicable lead time.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা AD623ARZ — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose AD623ARZ when an 8-SOIC instrumentation amplifier with an 800 kHz gain-bandwidth product, rail-to-rail output, and gains from 1 to 1000 is sufficient for the measurement accuracy and signal bandwidth. Its 2.7 V to 12 V supply capability suits compact low-voltage systems. Choose AD623BRZ instead when the circuit needs the B grade's lower maximum input offset voltage and input bias current, especially with small bridge or high-impedance sensor signals. Do not choose either part solely from package similarity: confirm input common-mode range, output swing, supply behavior, temperature range, and reference configuration. A cross-brand replacement should be accepted only after its pinout, footprint, gain method, electrical limits, and application circuit have been compared directly with the AD623 manufacturer datasheet.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য AD623BRZ
Brand Analog Devices Analog Devices
Package 8-SOIC 8-SOIC
Product Type Instrumentation amplifier Instrumentation amplifier
Number of Amplifiers 1 circuit 1 circuit
Maximum Input Offset Voltage 200 uV 25 uV
Maximum Input Bias Current 25 nA 17 nA
Grade A grade B grade

মূল পার্থক্যসমূহ

  • Lower offset error in the B-grade alternative (বনামAD623BRZ)
  • Lower input bias current in the B-grade alternative (বনামAD623BRZ)
  • Direct package reuse between A and B grades (বনামAD623BRZ)

ডিজাইন নোট

Route differential input and gain-setting connections as short, symmetric traces, and keep them away from switching nodes, high-current returns, and digital clock signals. Place the external gain resistor close to the AD623 gain-setting pin and use the manufacturer reference layout. For shunt measurements, take separate Kelvin connections directly from the resistor pads so copper voltage drops are not included in the sensed differential voltage.

Confirm that the selected gain and output level remain inside the usable input common-mode and output ranges for the actual 2.7 V to 12 V supply. Rail-to-rail output does not eliminate all headroom restrictions, particularly at low supply voltages or heavy loads. Use local supply bypassing and verify startup behavior in the complete circuit, especially when multiple rails are sequenced around sensitive sensor or converter stages.

Avoid increasing gain beyond the bandwidth required by the target signal. The AD623ARZ has an 800 kHz gain-bandwidth product, so closed-loop bandwidth decreases as the programmed gain rises. A high gain that appears attractive for offset-error reduction may leave insufficient bandwidth for transient signals. Select the gain from both the sensor-output amplitude and required frequency-response requirements, then validate filtering and settling at the system level.

Do not treat AD623ARZ and AD623BRZ as identical ordering codes merely because they use the same 8-SOIC footprint. The B grade has tighter offset-voltage and bias-current limits than the A grade. Confirm the exact MPN, pin functions, supply range, common-mode limits, and gain implementation against the manufacturer datasheet before treating either device as a production replacement.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The available product excerpts do not explicitly state RoHS, REACH, lead-free, halogen-free, or conflict-mineral status. AEC-Q100 qualification is not stated for this device.

ডেটা যাচাই করা হয়েছে: 2026-11-18 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

ad623arz datasheet amplificador ad623arz AD623ARZ pinout AD623ARZ datasheet pdf AD623ARZ equivalent AD623ARZ replacement AD623ARZ vs AD623BRZ AD623ARZ 800 kHz AD623ARZ 8-SOIC AD623ARZ bridge amplifier AD623ARZ price AD623ARZ stock Analog Devices AD623ARZ

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Analog Devices AD623ARZ AD623BRZ instrumentation amplifier differential amplifier analog amplifier IC single-supply operation dual-supply operation rail-to-rail output gain-bandwidth product common-mode rejection input offset voltage input bias current Wheatstone bridge current-shunt monitoring sensor signal conditioning gain-setting resistor 8-SOIC SOIC package family surface-mount technology RoHS REACH AEC-Q100 medical instrumentation industrial measurement
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন