Analog Devices

AD8009ARZ - 1 GHz 5,500 V/us Current-Feedback Amp | Analog Devices

MPN: AD8009ARZ ✓ সক্রিয়
+5 V test condition Vdss 100 ohm test condition Rds(on) 8-pin SOIC Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

AD8009ARZ সারাংশ

The Analog Devices AD8009ARZ is a single-channel current-feedback amplifier with 1 GHz bandwidth, a 5,500 V/us slew rate, and a 545 ps rise time, housed in an 8-pin SOIC package. Designed for high-speed signal conditioning, the device offers the bandwidth and slew rate required to preserve short pulse edges, while its current-feedback architecture is optimized for gain bandwidth, gain, and output-impedance relationships that differ from those of conventional voltage-feedback amplifiers.

A current-feedback amplifier is a high-speed operational-amplifier architecture that controls its closed-loop bandwidth through feedback impedance rather than a fixed gain-bandwidth relationship. Within the amplifier hierarchy, the AD8009 belongs to the broader family of operational amplifiers, analog signal-chain ICs, and semiconductor-based amplification devices. This architecture makes it useful when a system must process high-frequency waveforms without the severe slew-rate distortion that can occur in a lower-speed amplifier.

The headline specifications are a 1 GHz bandwidth, 5,500 V/us slew rate, and 545 ps rise time. These figures are particularly relevant to pulse amplification, where the amplifier must respond quickly to sharp transitions. The Analog Devices product page specifically identifies the AD8009 as an ultrahigh-speed current-feedback amplifier and positions it as a pulse amplifier. Its high slew rate limits slew-rate-induced distortion and supports accurate reproduction of fast edges.

The AD8009ARZ is available in the small SOIC package and operates over the industrial temperature range of -40°C to +85°C. Manufacturer test conditions shown in the datasheet include a +5 V supply, 100 ohm load, and specified feedback networks for gains of +1 and +2. Those conditions matter because bandwidth, slew rate, output swing, and distortion depend on supply voltage, load, feedback resistors, and gain configuration rather than on a single unqualified headline number.

Typical uses include high-speed instrumentation, pulse shaping, waveform conditioning, video or communications signal paths, and analog test systems. In these applications, the amplifier can sit between a sensor or signal source and a downstream measurement channel. The primary benefit is faster edge handling, while the principal design consideration is that feedback-network values, board parasitics, load capacitance, and source impedance can materially affect practical bandwidth and stability.

When laying out the AD8009ARZ, keep the feedback components and signal connections compact, provide appropriate supply bypassing, and route high-current return paths away from sensitive input nodes. Because a current-feedback amplifier does not follow the familiar gain-bandwidth behavior of a voltage-feedback amplifier, use the manufacturer’s recommended feedback values and simulation models when setting gain or calculating stability. The AD8009ARZ is therefore best suited to designs where the 1 GHz bandwidth, 5,500 V/us slew rate, and 545 ps rise time are central requirements rather than incidental options.

This page organizes the AD8009ARZ technical characteristics, sourcing information, package details, application guidance, and the limited drop-in alternatives that can be validated without adding unverified cross-reference parts. It also identifies the electrical and layout conditions that should be checked against the manufacturer datasheet before committing a high-speed analog layout.

এর জন্য ড্রপ-ইন বিকল্প AD8009ARZ — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

AD8009AR

✅ ড্রপ-ইন
📦 8-pin SOIC
Same AD8009 1 GHz electrical family and 8-pin SOIC footprint; ordering suffix differs by packaging or delivery form, with no quantified electrical difference identified

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

AD8009ARZ সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Amplifier Type Current-feedback amplifier
Number of Circuits 1 circuit
Bandwidth 1 GHz
Slew Rate 5,500 V/us
রাইজ টাইম 545 ps
সাপ্লাই ভোল্টেজ +5 V test condition
Load Resistance 100 ohm test condition
Gain Configuration +1 and +2 test conditions
Feedback Resistance at +1 Gain 301 ohm test condition
Feedback Resistance at +2 Gain 200 ohm test condition
অপারেটিং তাপমাত্রার পরিসর -40°C to +85°C
প্যাকেজ 8-pin SOIC
মাউন্টিং টাইপ Surface mount
Channel Count 1 channel

AD8009ARZ 8-pin soic পিন কনফিগারেশন গাইড

AD8009ARZ (8-pin soic প্যাকেজ)-এর পিন কনফিগারেশন। এই অ্যানালগ কম্পোনেন্টে ইনপুট, আউটপুট ও পাওয়ার সাপ্লাই পিন রয়েছে। অফসেট নাল, কম্পেনসেশন ও এনেবল পিন কনফিগারেশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। সিগন্যাল কন্ডিশনিং ও অ্যামপ্লিফায়ার সার্কিটের জন্য আদর্শ।

AD8009ARZ-এর জন্য 8-pin soic প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি AD8009ARZ.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

AD8009ARZ এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: High-Speed Pulse Conditioning, Fast Analog Instrumentation, Communications Signal Conditioning, Video and Waveform Drive, ADC and Converter Input Buffering, Precision Test and Measurement.

⚡

High-Speed Pulse Conditioning

The AD8009ARZ fits pulse-conditioning stages that must preserve sharp transitions because its 1 GHz bandwidth, 5,500 V/us slew rate, and 545 ps rise time reduce the risk of slew-rate limiting. It can be placed between a pulse-generating source and a measurement or capture circuit to increase drive capability without intentionally reshaping the event. The design should use the manufacturer’s +1 or +2 gain feedback examples as starting points, then verify source impedance, load capacitance, and feedback placement in simulation. A short, symmetric signal path and careful grounding are important because a high-speed amplifier cannot recover edge information that has already been distorted by the source or an unsuitable feedback network.

🏭

Fast Analog Instrumentation

The AD8009ARZ is appropriate for instrumentation front ends that measure short-duration analog events and require more bandwidth than a general-purpose amplifier provides. Its 1 GHz bandwidth and 5,500 V/us slew rate allow the amplifier to follow steep waveform edges while operating from a +5 V test condition in the manufacturer characterization. When the amplifier follows a sensor or front-end converter, account for sensor bandwidth, probe capacitance, and cable delay so the complete signal chain preserves the intended rise time. The feedback network must also be treated as part of the frequency response rather than as a purely resistive gain-setting element.

🌐

Communications Signal Conditioning

The AD8009ARZ can serve in communications and video-related signal paths where waveform edges must remain sharp through buffering or gain adjustment. Its 1 GHz bandwidth and 545 ps rise time provide substantial headroom for high-frequency transitions, while the 5,500 V/us slew rate limits large-signal distortion. The practical benefit is clearest when the source cannot directly drive the next stage or when a controlled gain is required ahead of a high-speed converter. Engineers should evaluate the destination’s input impedance and termination, place the feedback network close to the device, and ensure that the layout does not add appreciable parasitic capacitance to the sensitive output node.

📺

Video and Waveform Drive

The AD8009ARZ suits waveform-drive and video-conditioning applications because its 5,500 V/us slew rate can reproduce rapid transitions while its 1 GHz bandwidth supports high-frequency signal content. The 545 ps rise time is particularly useful when pulse shape must remain recognizable rather than becoming a sloping edge. In a practical output stage, verify voltage swing, load current, and output impedance for the selected load, because these operating conditions influence large-signal performance. Short feedback traces and a low-impedance return plane help preserve the intended response, while an output isolation resistor may be evaluated when driving capacitive loads that could otherwise produce excessive overshoot or instability.

🖥️

ADC and Converter Input Buffering

The AD8009ARZ can buffer high-speed analog nodes feeding converters when the source impedance, edge rate, or capacitive loading would otherwise degrade acquisition performance. Its 1 GHz bandwidth and 5,500 V/us slew rate provide a means to maintain signal amplitude and transition speed ahead of the sampling stage. The gain must be selected with the complete feedback network, and the input source must provide the impedance expected by the current-feedback architecture. Place the amplifier close to the converter when possible, route the differential or single-ended connection symmetrically where applicable, and keep high-capacitance converter inputs away from the feedback nodes to limit unintended peaking.

🔧

Precision Test and Measurement

The AD8009ARZ fits precision test and measurement systems that generate or inspect short, high-slope events and therefore require predictable edge behavior. Its 545 ps rise time and 1 GHz bandwidth support fast signal paths, while the +5 V, 100 ohm load conditions in the manufacturer characterization define one important operating reference. For measurement accuracy, treat sensor noise, switch resistance, fixture capacitance, and feedback tolerance as part of the total error budget. Use short connections and a controlled reference plane, and verify settling behavior with the complete acquisition chain before using the amplifier for precision amplitude or timing measurements.

What is the AD8009ARZ?
The AD8009ARZ is a single-channel, ultrahigh-speed current-feedback amplifier intended for high-speed analog signal conditioning and pulse amplification. Analog Devices identifies a 1 GHz bandwidth, 5,500 V/us slew rate, and 545 ps rise time as its principal performance characteristics. The device is offered in an 8-pin SOIC package and operates from -40°C to +85°C, making it appropriate for industrial systems that need to preserve fast transition edges.
What are the key specifications of AD8009ARZ that engineers should know?
The AD8009ARZ combines a 1 GHz bandwidth with a 5,500 V/us slew rate and a 545 ps rise time in an 8-pin SOIC package. According to the Analog Devices product page, its ultrahigh-speed current-feedback architecture is intended to reduce slew-rate limiting when amplifying pulses. The manufacturer datasheet presents specifications at +5 V, with a 100 ohm load and 301 ohm feedback for gain +1 or 200 ohm feedback for gain +2.
Where can I download the AD8009ARZ datasheet PDF?
The official AD8009ARZ datasheet PDF is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/AD8009.pdf. The manufacturer data sheet provides the electrical specifications, SOIC pin descriptions, test conditions, and application information. Use the AD8009 manufacturer product page at https://www.analog.com/en/products/ad8009.html for current product information and an overview of the device’s intended high-speed applications.
Where can I find the AD8009ARZ pinout?
The AD8009ARZ pinout is shown in the pin-description table and package drawing in the official Analog Devices AD8009 data sheet. The part uses an 8-pin SOIC package, and the PDF should be used as the authoritative source for assigning each physical lead. Do not infer lead functions from another amplifier family because current-feedback devices can have package-specific disable or compensation arrangements.
Is AD8009ARZ suitable for pulse amplification?
The AD8009ARZ is specifically suitable for pulse amplification because Analog Devices describes it as an ultrahigh-speed current-feedback amplifier with a 5,500 V/us slew rate. That slew rate produces a 545 ps rise time in the manufacturer’s characterization, helping reduce distortion when the amplifier must reproduce fast edges. Practical performance also depends on the selected feedback network, source impedance, load, layout, and supply decoupling.
What is the difference between current-feedback and voltage-feedback amplification?
Current-feedback amplification and voltage-feedback amplification differ mainly in how closed-loop bandwidth is controlled. A current-feedback amplifier uses feedback impedance to determine bandwidth and gain behavior, while a voltage-feedback amplifier follows a gain-bandwidth relationship in which increasing closed-loop gain reduces bandwidth. This distinction is important for the AD8009ARZ because its recommended feedback values, source impedance, and loading must be treated as an integrated high-frequency design.
AD8009ARZ vs AD8009AR: what is the difference?
The AD8009ARZ and AD8009AR belong to the same AD8009 amplifier family and use the same 8-pin SOIC electrical package, but their ordering codes can differ in packaging or delivery form. The available comparison identifies package type, mounting style, compliance fields, and series information as comparison points. Confirm the manufacturer ordering code, tape-and-reel indication, and termination suffix against the current Analog Devices data sheet before treating one as a drop-in substitute.
AD8009ARZ vs AD80052BR: can one replace the other?
The AD8009ARZ is not a drop-in replacement for the AD80052BR. The AD8009ARZ is a single-channel current-feedback amplifier in an 8-lead SOIC, whereas the AD80052BR is a dual-channel voltage-feedback amplifier with a different package and pinout. Although both are operational amplifiers, channel count, feedback architecture, package, and lead assignments differ, so an AD80052BR cannot be installed directly on the AD8009ARZ footprint.
What is the best drop-in replacement for AD8009ARZ?
A validated drop-in replacement for the AD8009ARZ must use the same 8-pin SOIC footprint, preserve pin assignments, and provide comparable bandwidth, slew rate, supply range, and stability characteristics. The available cross-reference search identifies generic pin-to-pin replacement categories but does not name enough electrically validated, same-package alternatives to establish a complete replacement list. Treat AD8009AR ordering variants as family-related options only after checking their exact suffix, package, and electrical configuration.
Can AD8009AR replace AD8009ARZ?
The AD8009AR can be electrically related to the AD8009ARZ because both are AD8009 8-pin SOIC devices, but a final substitution requires confirmation of the exact ordering suffix and mechanical delivery format. The manufacturer should confirm that the two order codes have identical electrical performance, pinout, and package orientation. If those requirements match, the existing SOIC footprint can generally be retained; otherwise, the part is not a true drop-in replacement.
What can replace the AD8009ARZ in a high-speed design?
The AD8009ARZ should be replaced only by an amplifier with an identical 8-pin SOIC pinout and comparable high-speed performance, including at least 1 GHz bandwidth and 5,500 V/us slew-rate capability. The AD811JRZ and LMH6702MA/NOPB appear in comparison pages, but the available information does not establish either as a pin-to-pin substitute. Review their gain-bandwidth, slew-rate, supply, enable, and stability behavior before considering a board change.
When should I choose the AD8009ARZ over a lower-speed amplifier?
Choose the AD8009ARZ when preserving fast pulse edges is a primary requirement and the circuit needs approximately 1 GHz bandwidth with a 5,500 V/us slew rate. A lower-speed amplifier may offer lower power, lower cost, or simpler settling behavior for ordinary audio and instrumentation frequencies. The AD8009ARZ is more appropriate for waveform edges, pulse shaping, and high-frequency conditioning where slew-rate limiting would materially distort the waveform.
Is the AD8009ARZ suitable for high-speed instrumentation?
The AD8009ARZ is suitable for high-speed instrumentation that must process short-duration signals without severe slew-rate distortion. Its 1 GHz bandwidth and 545 ps rise time support applications involving pulse capture, signal conditioning, and waveform generation. The instrumentation designer must still account for probe capacitance, cable effects, source impedance, feedback resistors, and board parasitics because these factors can reduce realized bandwidth or compromise stability.
How should feedback resistors be selected for AD8009ARZ?
Use the feedback values specified by Analog Devices for the intended gain and verify the complete source, feedback, and load network in simulation. The manufacturer test conditions use 301 ohm feedback for gain +1 and 200 ohm feedback for gain +2 at +5 V with a 100 ohm load. Because current-feedback amplifiers are sensitive to the complete impedance network, avoid choosing feedback values solely from a standard voltage-feedback gain equation.
Where to buy AD8009ARZ online and what is the lead time?
Use the Request a Quote form on this page to ask about AD8009ARZ availability, lead time, and order handling. The manufacturer and distributor listings identify the AD8009ARZ as an 8-SOIC current-feedback amplifier, but a reliable production lead time depends on inventory, order quantity, and packaging requirements. Request the current quotation directly so that the commercial response reflects the exact MPN and delivery schedule.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা AD8009ARZ — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose the AD8009ARZ when a single-channel 8-pin SOIC amplifier must handle approximately 1 GHz bandwidth, 5,500 V/us slew rate, and 545 ps rise time while operating over -40°C to +85°C. It is particularly appropriate for pulse amplification, fast instrumentation, waveform conditioning, and high-speed analog buffering. The identified AD8009AR option belongs to the same family and may fit when its exact ordering suffix, packaging, and electrical configuration are confirmed. AD80052BR is not a substitute because it combines dual channels with voltage-feedback architecture in a different package. AD811JRZ and LMH6702MA/NOPB require full pinout, bandwidth, slew-rate, supply, and stability review before consideration. If the design does not need sub-nanosecond rise time, a lower-speed amplifier may provide a simpler and potentially lower-power solution.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য AD8009AR
Package 8-pin SOIC 8-pin SOIC
Brand Analog Devices Analog Devices
Amplifier Type Current-feedback amplifier Current-feedback amplifier
Channel Count 1 circuit 1 circuit
Bandwidth 1 GHz 1 GHz
Slew Rate 5,500 V/us 5,500 V/us
Rise Time 545 ps 545 ps
Operating Temperature Range -40°C to +85°C -40°C to +85°C
Manufacturer Test Supply +5 V +5 V
Manufacturer Test Load 100 ohm 100 ohm

মূল পার্থক্যসমূহ

  • Very high slew rate for pulse-edge preservation (বনামAD8009AR)
  • 1 GHz bandwidth in a compact single-channel package (বনামAD8009AR)
  • Current-feedback architecture optimized for high-speed gain stages (বনামAD8009AR)

ডিজাইন নোট

Place the input, output, and feedback components close to the AD8009ARZ and keep the feedback loop compact. A current-feedback amplifier can develop unintended peaking when parasitic capacitance or inductance interacts with the feedback network. Use a continuous ground plane, minimize loop area, and route the feedback trace away from the output and supply nodes. The manufacturer characterization at +5 V, 100 ohm load, 301 ohm feedback for gain +1, and 200 ohm feedback for gain +2 provides useful starting points, but the final network should be verified with the actual load and source impedance.

Evaluate large-signal behavior with the 5,500 V/us slew-rate requirement in mind. Probe capacitance, cable length, connector inductance, and the next-stage input capacitance can create overshoot or ringing even when the nominal rise time is fast. Keep the output connection short, consider a small series isolation resistor when driving a capacitive load, and use controlled-impedance routing or matched connections when cable losses are significant. Measure the complete source-to-load path rather than relying only on the isolated amplifier response.

Apply the manufacturer’s supply and load conditions during design verification, including +5 V operation and a 100 ohm test load. Place supply-bypass capacitors at the device power pins and provide a low-impedance return path so output-current transitions do not couple supply disturbance into the signal. Check output swing, quiescent current, output drive, and thermal behavior in the final configuration. Because the datasheet characterizes performance under specified feedback and loading arrangements, changing gain, load, or supply can alter practical bandwidth and distortion.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The manufacturer product page and data sheet excerpts do not provide an unambiguous compliance statement for the exact AD8009ARZ order code.

ডেটা যাচাই করা হয়েছে: 2026-11-18 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

ad8009arz datasheet ad8009arz reel7 ad8009arz reel AD8009ARZ datasheet pdf AD8009ARZ pinout AD8009ARZ equivalent AD8009ARZ replacement AD8009ARZ cross reference AD8009ARZ vs AD8009AR AD8009ARZ vs AD80052BR AD8009ARZ 1 GHz amplifier AD8009ARZ 5500 V/us Analog Devices AD8009ARZ AD8009ARZ pulse amplifier AD8009ARZ price

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Analog Devices AD8009 AD8009ARZ AD8009AR AD80052BR AD811JRZ LMH6702MA/NOPB current-feedback amplifier operational amplifier analog signal-chain IC semiconductor amplifier 1 GHz bandwidth 5,500 V/us slew rate 545 ps rise time feedback impedance 8-pin SOIC SOIC package family surface-mount package industrial temperature range pulse amplifier high-speed instrumentation signal conditioning waveform conditioning Analog Devices data sheet
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন