Analog Devices

ADF4151BCPZ-RL7 - 3.5GHz Fractional-N PLL | Analog Devices

MPN: ADF4151BCPZ-RL7 ✓ সক্রিয়
32-lead WFQFN with exposed pad Package 3.5 GHz Speed
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

ADF4151BCPZ-RL7 সারাংশ

The Analog Devices ADF4151BCPZ-RL7 is a fractional-N or integer-N phase-locked-loop frequency synthesizer rated for operation up to 3.5 GHz and housed in a 32-lead WFQFN exposed-pad package. It requires an external voltage-controlled oscillator, loop filter, and reference source, giving the designer control over the RF output stage while the integrated synthesizer handles phase detection, programmable division, and frequency control.

A phase-locked loop, or PLL, is a feedback-control system that locks an output frequency to a stable reference. A fractional-N frequency synthesizer extends this arrangement by dividing the reference in integer and fractional increments. In the broader product hierarchy, the ADF4151 is a clock and timing IC, a PLL frequency synthesizer, and ultimately a semiconductor frequency-control device. This division places it between a reference clock and an external VCO.

The device supports both fractional-N and integer-N synthesis, allowing fractional operation for fine frequency resolution or integer operation for simpler channel planning. Its 3.5 GHz upper-frequency designation makes it relevant to microwave and RF systems, while the external-VCO architecture supports designs in which the RF oscillator technology, tuning range, or output power is determined separately from the synthesizer IC.

For integration, the ADF4151 operates with an external VCO, an external loop filter, and a reference frequency. The loop filter establishes loop bandwidth, phase margin, and rejection of reference or VCO phase noise. Digital programming controls synthesis parameters through the device interface. The manufacturer identifies the ADF4151 as footprint- and software-compatible with the ADF4350, which is important when evaluating PCB reuse and register-level migration.

Typical uses include wireless infrastructure, microwave radio links, test and measurement instruments, radar and electronic-warfare systems, and other RF systems requiring programmable frequency generation. In each case, the external VCO permits selection of an appropriate tuning range and output power, while the synthesizer establishes phase-lock and channel-selection behavior.

A critical implementation consideration is that the PLL performance depends on the complete loop rather than the IC alone. Select the reference, VCO, loop filter, charge-pump settings, and output-divider configuration together. Preserve short return paths and provide adequate thermal coupling through the exposed pad when programming increases operating activity or ambient temperature.

This product page combines the verified device identity and package information with practical PLL design guidance, same-footprint alternatives, application guidance, and a parameter-by-parameter comparison. It is intended to help engineers identify whether the ADF4151 architecture and its external-VCO approach fit a microwave frequency-synthesis design.

এর জন্য ড্রপ-ইন বিকল্প ADF4151BCPZ-RL7 — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible ADF4151BCPZ-RL7 (একই form factor এবং footprint) — পার্থক্য রয়েছে Package, Synthesis Modes, Architecture, Control Interface, Device Type.

Analog Devices
Package: 24-lead WFQFN with exposed pad
Architecture: Phase-locked loop with integrated dividers
Control Interface: Programmable serial interface
এর সাথে তুলনা করুন ADF4151BCPZ-RL7 →
Analog Devices
Package: 32-lead WFQFN exposed-pad CSP
Synthesis Modes: Fractional-N and integer-N modes
Device Type: Fractional-N/Integer-N PLL frequency synthesizer
এর সাথে তুলনা করুন ADF4151BCPZ-RL7 →
Analog Devices
Package: 32-LFCSP (5 mm x 5 mm) with exposed pad
Control Interface: 3-wire SPI-compatible serial
এর সাথে তুলনা করুন ADF4151BCPZ-RL7 →
Analog Devices
Package: 32-lead VFQFN exposed pad, CSP
এর সাথে তুলনা করুন ADF4151BCPZ-RL7 →

ADF4350BCPZ

✅ ড্রপ-ইন
Analog Devices
📦 32-LFCSP
137.5 MHz to 4400 MHz · 2200 MHz to 4400 MHz · Fractional-N / Integer-N PLL · Up to 32 MHz (typical) · Divide-by-1/2/4/8/16 · Sub-Hz resolution

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

ADF4351BCPZ

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
Analog Devices
📦 32-LFCSP
RF clock and frequency synthesizer IC · Fractional-N and integer-N · Yes · 2200 MHz to 4400 MHz · 4400 MHz · 10 MHz to 250 MHz · 3 V to 3.6 V · 32-lead VFQFN exposed pad, CSP

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

ADF4150BCPZ

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
Analog Devices
📦 32-LFCSP
Fractional-N and integer-N RF frequency synthesizer · 4.4 GHz · 10 MHz to 4 GHz · 750 MHz · Phase-locked loop with integrated dividers · External VCO, loop filter, and reference frequency source · 1, 2, 4, 8, or 16 · Programmable serial interface

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

ADF4153BCPZ

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
Analog Devices
📦 32-LFCSP
Fractional-N frequency synthesizer · 4 GHz · 10 MHz · 3.3 V · Fractional-N phase-locked loop · Low-noise digital phase-frequency detector · Precision charge pump · 20 pins

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

ADF4151BCPZ

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
Analog Devices
📦 32-LFCSP
Fractional-N/Integer-N PLL frequency synthesizer · 1 channel · 3.5 GHz · 4.4 GHz · 10 MHz · Fractional-N and integer-N modes · Yes · Yes

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

ADF4151BCPZ-RL7 বিশেষণ

Product Type Fractional-N/Integer-N PLL frequency synthesizer
Maximum Synthesizer Frequency 3.5 GHz
Alternative Reported Frequency 4.4 GHz
Architecture Phase-locked loop with external VCO
Synthesis Modes Fractional-N and integer-N
External VCO Requirement Required
External Loop Filter Requirement Required
External Reference Requirement Required
Programmable Frequency Control Digital programmable
প্যাকেজ 32-lead WFQFN with exposed pad
মাউন্টিং টাইপ Surface mount
ADF4350 Compatibility Footprint and software compatible

ADF4151BCPZ-RL7 32-lead wfqfn with exposed pad পিন কনফিগারেশন গাইড

ADF4151BCPZ-RL7 (32-lead wfqfn with exposed pad প্যাকেজ)-এর পিন কনফিগারেশন। পিন নম্বরিং, ফাংশন এবং সংযোগ ডায়াগ্রাম প্রস্তুতকারকের ডেটাশিটে সংজ্ঞায়িত করা আছে। সঠিক ফুটপ্রিন্ট এবং সোল্ডারিং নির্দেশিকার জন্য এটি দেখুন।

ADF4151BCPZ-RL7-এর জন্য 32-lead wfqfn with exposed pad প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি ADF4151BCPZ-RL7.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

ADF4151BCPZ-RL7 এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Wireless Infrastructure RF Synthesis, Microwave Radio Link Local Oscillator, Test and Measurement Instruments, Radar and Electronic Warfare, Industrial RF Signal Generators, Communications Module Frequency Control.

🌐

Wireless Infrastructure RF Synthesis

The ADF4151BCPZ-RL7 fits wireless-infrastructure frequency synthesis where a programmable channel is required and an external VCO is acceptable. Its fractional-N and integer-N operating modes let the designer select fine fractional resolution or simpler integer channel division, while the identified 3.5 GHz device rating supports microwave-band planning. The synthesizer works with an external VCO, reference, and loop filter, so component selection determines the final tuning range and phase noise. Compared with a self-contained oscillator, this architecture provides greater RF flexibility but requires careful loop-bandwidth and phase-margin design.

🌐

Microwave Radio Link Local Oscillator

The ADF4151BCPZ-RL7 can generate a programmable local-oscillator reference for microwave radio links by controlling an external VCO through the PLL. Fractional-N operation supports fine frequency offsets, while integer-N mode simplifies configurations where channel spacing is an exact multiple of the reference. The external-VCO approach lets the RF engineer select tuning sensitivity, output power, and phase-noise characteristics independently of the synthesizer. The principal design tradeoff is system complexity: reference spurs, VCO noise, and loop-filter selection jointly determine phase-locked performance.

🖥️

Test and Measurement Instruments

The ADF4151BCPZ-RL7 is applicable to test and measurement equipment requiring an accurately referenced, programmable RF source. Its fractional-N and integer-N modes provide flexibility across calibrated frequencies, and the external VCO allows the instrument designer to choose output power and tuning range appropriate for the measurement front end. A stable reference and carefully designed loop filter are essential when minimizing phase noise and lock-time requirements. Because the device does not include the VCO, the complete source specification must be evaluated at the system level rather than inferred from the synthesizer rating alone.

✈️

Radar and Electronic Warfare

The ADF4151BCPZ-RL7 can serve as the frequency-control element in programmable radar or electronic-warfare RF chains when the architecture includes an external VCO. The identified 3.5 GHz device rating makes the part relevant to microwave signal paths, while fractional-N operation permits flexible channel placement around a stable reference. Its programming interface supports controlled configuration of the synthesizer, but calibration and channel accuracy depend on the reference, divider settings, and loop design. Engineers should evaluate phase noise, spur performance, lock time, and temperature behavior as a single signal-chain issue.

🏭

Industrial RF Signal Generators

The ADF4151BCPZ-RL7 is suitable for industrial RF generators that need adjustable frequency under digital control. Fractional-N operation can address fine tuning requirements, whereas integer-N operation supports more predictable divider relationships to the reference. Using an external VCO gives the designer access to a wider selection of tuning ranges and output levels than would be possible with a fixed integrated oscillator. The design must include a reference source, loop filter, and exposed-pad-aware PCB layout. Thermal verification should cover the highest supported operating frequency and programming activity.

📡

Communications Module Frequency Control

The ADF4151BCPZ-RL7 can provide channelized frequency control in a communications module that already uses an external VCO. The 32-lead WFQFN exposed-pad package supports compact surface-mount integration, and the dual fractional-N and integer-N modes offer a path from exact channel division to fine offset synthesis. Its value is greatest where one synthesizer must support several operating channels and where VCO characteristics require external selection. Integration still requires verified register programming, stable reference routing, clean supply distribution, and a loop-filter design that achieves the required lock time without excessive phase noise.

What is the ADF4151BCPZ-RL7?
The ADF4151BCPZ-RL7 is a fractional-N or integer-N phase-locked-loop frequency synthesizer from Analog Devices, specified for operation up to 3.5 GHz in a 32-lead WFQFN exposed-pad package. According to the manufacturer's product page, it implements a frequency synthesizer with an external voltage-controlled oscillator, loop filter, and reference frequency.
What frequency range does ADF4151BCPZ-RL7 support?
The verified distributor description identifies the ADF4151BCPZ-RL7 as a 3.5 GHz PLL device, while another distributor description reports a 4.4 GHz upper frequency. Because the two manufacturer-linked listings describe the same MPN with different upper-frequency labels, engineers should confirm the exact RF output and synthesizer limits against the Analog Devices ADF4151 datasheet before setting the VCO and output-divider configuration.
Where can I download the ADF4151BCPZ-RL7 datasheet?
The official ADF4151 datasheet is available through the Analog Devices product page at https://www.analog.com/en/products/adf4151.html. That page is the appropriate starting point for the electrical characteristics, pin descriptions, register map, application circuit, and package drawing. A third-party PDF mirror is also listed, but the manufacturer-hosted document should be used as the controlling engineering reference.
Where is the ADF4151BCPZ-RL7 pinout?
The ADF4151BCPZ-RL7 pinout is defined by the Analog Devices manufacturer datasheet and uses a 32-lead WFQFN footprint with an exposed pad. Use the pin-description table and land-pattern drawing in that document when assigning signals and PCB tracks. Do not derive the pin arrangement solely from a generic 32-pin package library because exposed-pad connections and analog supply assignments are device-specific.
Does the ADF4151 require an external VCO?
Yes, the ADF4151 requires an external voltage-controlled oscillator, an external loop filter, and an external reference frequency. According to the Analog Devices product page, this arrangement allows the synthesizer to control an external VCO. It also means that VCO tuning range, phase noise, output power, and loop-filter design remain important system-level considerations.
What can replace the ADF4151BCPZ-RL7?
The ADF4350 is the closest documented same-family alternative because Analog Devices states that the ADF4151 is footprint- and software-compatible with the ADF4350. Compatibility should still be checked against the required RF frequency, phase-detector rate, charge-pump behavior, register map, and loop-filter design before approving a replacement. Other same-package family devices may require different programming or tuning.
Is ADF4151BCPZ-RL7 compatible with ADF4350?
Analog Devices explicitly describes the ADF4151 as footprint- and software-compatible with the ADF4350. This makes the ADF4350 the most relevant drop-in comparison for an existing ADF4151 PCB and software configuration. Compatibility of the package does not automatically guarantee identical RF performance, so the VCO tuning range, reference requirements, output-divider range, and loop-filter calculations must still be checked.
ADF4151BCPZ-RL7 vs ADF4350BCPZ: which is better for a microwave design?
Choose the ADF4151BCPZ-RL7 when the design is already configured for its fractional-N or integer-N control and 3.5 GHz identified device rating; choose the ADF4350BCPZ when its documented RF range and register behavior better match the VCO and channel plan. Analog Devices specifically identifies footprint and software compatibility between the ADF4151 and ADF4350, but frequency, reference, charge-pump, and loop-filter requirements determine the practical choice.
When should I choose the ADF4151BCPZ-RL7 over another PLL synthesizer?
Choose the ADF4151BCPZ-RL7 when fractional-N or integer-N operation, a 32-lead WFQFN exposed-pad package, and control of the RF oscillator through an external VCO are central to the architecture. It is especially relevant when software compatibility with ADF4350 designs is valuable. Choose another member only after confirming output frequency, reference input, phase-noise requirements, and loop-filter compatibility.
Is ADF4151BCPZ-RL7 suitable for RF and microwave applications?
Yes, the ADF4151BCPZ-RL7 is suitable for programmable RF and microwave frequency-synthesis systems that use an external VCO. Its verified fractional-N and integer-N modes support flexible channel generation, while the identified 3.5 GHz device rating makes it relevant to microwave links and instrumentation. Final suitability depends on the VCO tuning range and the phase-noise and lock performance of the complete feedback loop.
What is the best Analog Devices equivalent for ADF4151BCPZ-RL7?
The best documented Analog Devices equivalent is the ADF4350BCPZ because the manufacturer identifies the ADF4151 as footprint- and software-compatible with the ADF4350. It is the preferred candidate when a same-footprint migration and common software framework are priorities. Before substitution, confirm the required output range, phase-detector frequency, reference input, charge-pump settings, and loop-filter component values.
Where can I buy ADF4151BCPZ-RL7 and check current availability?
Use the Request a Quote form on this page to request the current ADF4151BCPZ-RL7 price, stock position, lead time, and package quantity with XAIPART. Because pricing and availability can change by date and order volume, submit the exact MPN and target quantity rather than relying on an old catalog reference. The form also allows allocation inquiries for prototypes and production builds.
What is the current price of ADF4151BCPZ-RL7?
The current unit price for ADF4151BCPZ-RL7 should be requested through the Request a Quote form on this page. Provide the exact MPN, reel quantity, and production or prototype quantity so the quote reflects current component availability and order terms. This avoids presenting a stale catalog price as a live purchasing commitment.
What is the lead time for ADF4151BCPZ-RL7?
The current lead time for ADF4151BCPZ-RL7 depends on supplier inventory, reel quantity, and manufacturing demand. Submit a quote request with the required quantity and target delivery date to obtain a current allocation response. For prototype work, note whether a cut tape is acceptable; for production, specify the complete reel and packaging requirements.
Is ADF4151BCPZ-RL7 in stock?
Current stock for ADF4151BCPZ-RL7 should be confirmed through the Request a Quote form on this page. Include the exact suffix -RL7, reel quantity, and requested delivery date. The manufacturer lists the device as active, but active status does not by itself guarantee that every order quantity is immediately available for allocation.
What are the key specifications engineers should know about ADF4151BCPZ-RL7?
The key verified specifications are fractional-N and integer-N synthesis, a 3.5 GHz device rating, and a 32-lead WFQFN exposed-pad package. Analog Devices also states that the part is footprint- and software-compatible with the ADF4350. External VCO, loop-filter, and reference components are required, so final PLL performance depends on the complete RF feedback system rather than the IC alone.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা ADF4151BCPZ-RL7 — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose the ADF4151BCPZ-RL7 for a programmable RF synthesis design that uses an external VCO and needs fractional-N or integer-N operation in a 32-lead WFQFN exposed-pad package. It is a strong candidate when the manufacturer-documented footprint and software compatibility of the ADF4350 simplifies migration or shared firmware. Select the ADF4350BCPZ when its RF range, phase-detector settings, divider structure, and loop-filter requirements better fit the target VCO. Consider ADF4153BCPZ when its frequency range and register configuration provide a closer functional match, but verify programming changes before replacement. ADF4150BCPZ and ADF4351BCPZ are useful same-package family review candidates when register, reference, and RF requirements align. The ADF4151BCPZ without the -RL7 suffix has the closest electrical identity, but its ordering and packaging requirements must match procurement needs. In every case, validate reference range, output frequency, VCO sensitivity, phase noise, lock time, and loop stability as one integrated design.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য ADF4350BCPZ ADF4351BCPZ ADF4150BCPZ ADF4153BCPZ ADF4151BCPZ
Package 32-lead WFQFN with exposed pad 32-LFCSP 32-LFCSP 32-LFCSP 32-LFCSP 32-LFCSP
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Product Type Fractional-N/Integer-N PLL frequency synthesizer PLL frequency synthesizer PLL frequency synthesizer PLL frequency synthesizer Fractional-N/Integer-N PLL frequency synthesizer Fractional-N/Integer-N PLL frequency synthesizer
Footprint Compatibility 32-lead WFQFN with exposed pad Manufacturer states footprint compatible with ADF4151 Same 32-LFCSP family package Same 32-LFCSP family package Same 32-LFCSP family package Same base-device footprint

মূল পার্থক্যসমূহ

  • Manufacturer-documented footprint and software compatibility (বনামADF4350BCPZ)
  • Support for fractional-N and integer-N operating modes (বনামADF4150BCPZ)
  • Verified 3.5 GHz device classification (বনামADF4153BCPZ)

ডিজাইন নোট

Use the Analog Devices land-pattern and exposed-pad guidance when laying out the 32-lead WFQFN. Place input, output, reference, and ground connections according to the manufacturer pin table, connect the exposed pad as directed, and avoid routing sensitive reference or VCO-control traces beneath the device. Decoupling inductance must be minimized so switching currents do not add noise to the PLL reference and control network.

Treat the reference input, VCO-control path, charge-pump output, and loop-filter components as a coupled high-performance phase-noise subsystem. Keep the reference route short and return to the device ground reference, place loop-filter parts close to the charge-pump and VCO-tuning nodes, and use a continuous ground reference beneath the relevant signals. Poor return-current continuity can degrade phase noise even when nominal component values are correct.

Estimated: thermal dissipation equals input power minus output power and cannot be calculated from the identified frequency alone because the external VCO topology and device operating conditions are required. Evaluate the ADF4151 with its maximum intended programming activity and ambient temperature, then rely on the exposed pad, copper area, and board construction for heat spreading. Confirm the manufacturer's junction-temperature limit rather than using a generic PCB thermal estimate.

Do not select the PLL from the headline frequency alone. Confirm the reference-input range, phase-detector rate, integer and fractional divider limits, charge-pump settings, VCO tuning sensitivity, and loop-filter target before approving the ADF4151. A valid frequency command can still produce poor lock behavior, excessive spurs, or inadequate phase margin if those system parameters are inconsistent.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

Compliance declarations for the exact ADF4151BCPZ-RL7 orderable part were not identified. Consult the current Analog Devices product documentation and applicable material-declaration records before release.

ডেটা যাচাই করা হয়েছে: 2026-11-15 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

ADF4151BCPZ-RL7 ADF4151BCPZ-RL7 datasheet ADF4151BCPZ-RL7 datasheet pdf ADF4151BCPZ-RL7 pinout ADF4151BCPZ-RL7 equivalent ADF4151BCPZ-RL7 replacement ADF4151BCPZ-RL7 price ADF4151BCPZ-RL7 stock Analog Devices ADF4151BCPZ-RL7 ADF4151BCPZ-RL7 vs ADF4350BCPZ ADF4151BCPZ-RL7 schematic ADF4151BCPZ-RL7 application circuit

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Analog Devices ADF4151BCPZ-RL7 ADF4151BCPZ ADF4350BCPZ ADF4351BCPZ ADF4150BCPZ ADF4153BCPZ fractional-N PLL integer-N PLL phase-locked loop frequency synthesizer clock and timing IC voltage-controlled oscillator external loop filter reference clock charge pump phase detector 32-lead WFQFN 32-LFCSP QFN family surface-mount package exposed pad wireless infrastructure microwave radio link RoHS REACH
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন