Analog Devices

ADSP-21566KBCZ4 - 400MHz SHARC+ DSP | Analog Devices

MPN: ADSP-21566KBCZ4 ✓ সক্রিয়
400-ball CSP_BGA Package 400 MHz Speed 640 KB Memory
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

ADSP-21566KBCZ4 সারাংশ

Analog Devices ADSP-21566KBCZ4 is a single-core SHARC+ digital signal processor rated at 400 MHz, with 640 KB of L1 memory, 256 KB of shared L2 SRAM, and DDR memory support in a 400-ball CSP_BGA package measuring 17 x 17 mm. The processor combines fixed-point and floating-point execution in a 64-bit architecture designed for deterministic, low-latency real-time signal processing.

A digital signal processor is a specialized semiconductor used to execute mathematical operations on streams of audio, control, sensor, or communications data. Unlike a general-purpose processor, a DSP typically combines parallel execution hardware, structured memory, and optimized instruction sets. The ADSP-21566 belongs to the SHARC+ family, which extends the Super Harvard Architecture with SIMD processing optimized for demanding real-time workloads.

Principal features include a 400 MHz SHARC+ core, 640 KB of L1 memory, 256 KB of shared L2 SRAM, DDR support, and a 64-bit fixed-point and floating-point processing capability. The local SRAM allows frequently accessed coefficients and sample buffers to remain close to the execution engine, reducing external-memory bottlenecks during iterative filtering and adaptive algorithms.

The ADSP-21566KBCZ4 is specifically architected for deterministic real-time audio processing. Its SHARC+ core can execute multiple data lanes efficiently, making it suitable for acoustic echo cancellation, noise reduction, active and road-noise cancellation, voice processing, audio zoning, and in-car communication systems. DDR connectivity expands the working-memory capacity required by multichannel audio and large algorithmic data sets.

Typical deployments include automotive cabin-noise control, microphone-array processing, speaker-driver adaptation, communications audio, industrial monitoring, and professional audio equipment. In these systems, the processor can execute filters, FFT-based analysis, adaptive beamforming, and noise-reduction algorithms while maintaining predictable response times.

Board design requires careful DDR routing, multilayer PCB construction, controlled impedance, and a power-delivery network that meets the processor's switching and signal-integrity requirements. The 400-ball BGA also requires careful escape-routing planning and appropriate assembly inspection procedures, while thermal design must distribute heat across the package rather than relying on a small hot spot.

This product overview combines the manufacturer specifications, source MPN information, package details, application guidance, comparison parameters, and practical replacement considerations to support engineering selection, PCB planning, sourcing, and hardware bring-up.

এর জন্য ড্রপ-ইন বিকল্প ADSP-21566KBCZ4 — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

ADSP-21565KBCZ4

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
📦 400-ball CSP_BGA (17 x 17 mm)
Uses the same 400 MHz SHARC+ family platform and 400-ball CSP_BGA footprint, while core clock remains unchanged at 400 MHz; feature and interface differences must be checked against the individual ordering table.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

ADSP-21567KBCZ4

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
📦 400-ball CSP_BGA (17 x 17 mm)
Maximum clock increases from 400 MHz to 800 MHz, a 100% increase, while retaining the ADSP-2156x SHARC+ package family; the higher throughput requires clock, power, thermal, and firmware review.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

ADSP-21566KBCZ1

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
📦 400-ball CSP_BGA (17 x 17 mm)
Shares the 400 MHz core rating, 64-bit processing, 640 KB L1, 256 KB shared L2, DDR support, and 400-ball footprint; the ordering suffix identifies a different temperature or grade option, with no core-speed difference.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

ADSP-21566KBCZ2

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
📦 400-ball CSP_BGA (17 x 17 mm)
Retains the 400 MHz clock, 640 KB L1, 256 KB shared L2, DDR interface, and 400-ball package while using a different grade suffix from KBCZ4; verify the applicable temperature limits before substitution.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

ADSP-21566KBCZ3

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
📦 400-ball CSP_BGA (17 x 17 mm)
Provides the same 400 MHz SHARC+ performance level, memory organization, DDR capability, and 400-ball footprint as KBCZ4, differentiated by grade suffix rather than core clock or package geometry.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

ADSP-21566KBCZ4 বিশেষণ

Processor Type Single-core SHARC+ digital signal processor
সর্বোচ্চ ক্লক ফ্রিকোয়েন্সি 400 MHz
Architecture 64-bit fixed-point and floating-point
Instruction Set Super Harvard Architecture
L1 Memory 640 KB
Shared L2 SRAM 256 KB
External Memory Support DDR
Package Type 400-ball CSP_BGA
Package Dimensions 17 x 17 mm
Ball Count 400 balls
মাউন্টিং টাইপ Surface mount
Core Count 1 core
SIMD Processing Supported

ADSP-21566KBCZ4 17 x 17 mm পিন কনফিগারেশন গাইড

ADSP-21566KBCZ4 (17 x 17 mm প্যাকেজ)-এর পিন কনফিগারেশন। পিন নম্বরিং, ফাংশন এবং সংযোগ ডায়াগ্রাম প্রস্তুতকারকের ডেটাশিটে সংজ্ঞায়িত করা আছে। সঠিক ফুটপ্রিন্ট এবং সোল্ডারিং নির্দেশিকার জন্য এটি দেখুন।

ADSP-21566KBCZ4-এর জন্য 17 x 17 mm প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি ADSP-21566KBCZ4.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

ADSP-21566KBCZ4 এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Automotive Active Noise Cancellation, Acoustic Echo Cancellation, Automotive Voice Interface, Microphone Array Beamforming, Professional Audio Effects Processor, Industrial Vibration Analysis.

🚗

Automotive Active Noise Cancellation

The ADSP-21566KBCZ4 fits automotive active-noise cancellation because its 400 MHz SHARC+ core executes the filtering and adaptive-control workload with deterministic response. The 640 KB L1 and 256 KB shared L2 provide fast access to filter coefficients, microphone signals, and speaker-error histories, while DDR supports larger multichannel buffers. Compared with a general-purpose processor, the SIMD-oriented SHARC+ architecture concentrates parallel arithmetic capability into an audio-focused design. Implementation should account for DDR timing, low-noise analog rails, thermal loading, and startup synchronization between the control algorithm and the vehicle audio network.

🎙️

Acoustic Echo Cancellation

The ADSP-21566KBCZ4 is suitable for acoustic echo cancellation in voice terminals, conferencing equipment, and automotive cabins because its 400 MHz SHARC+ core can process microphone and loudspeaker-reference streams with predictable latency. Local L1 and L2 memory reduces pressure on external memory during adaptive-filter updates, while 64-bit arithmetic supports both fixed-point and floating-point implementation choices. DDR can hold longer history or multichannel sample buffers. For a robust implementation, maintain deterministic interrupt scheduling, protect DDR routes from timing violations, and size the feedback-delay path before tuning the cancellation algorithm.

🎤

Automotive Voice Interface

The ADSP-21566KBCZ4 can serve as the real-time processor for a vehicle voice interface requiring wake-word detection, feature extraction, noise suppression, and command recognition. Its 400 MHz SHARC+ execution engine provides the throughput needed for multichannel sampling and DSP pipelines, while 640 KB L1 and 256 KB shared L2 accommodate active working sets close to the core. The processor's deterministic behavior is valuable when multiple audio tasks must complete within fixed frame periods. Automotive implementations should also validate temperature, electromagnetic behavior, functional safety strategy, DDR margins, and the exact qualification status of the selected ordering suffix.

🌐

Microphone Array Beamforming

The ADSP-21566KBCZ4 supports multichannel microphone-array beamforming by applying sample-rate conversion, filtering, weighting, and matrix operations across several audio streams. Its SIMD-oriented SHARC+ architecture and 400 MHz clock are suited to parallel coefficient and signal calculations, while the 256 KB shared L2 can reduce contention among active channels. The 640 KB L1 provides space for frequently accessed vectors and timing data. For best results, synchronize channel clocks, preserve fixed-point headroom, place memory interfaces on carefully routed PCB layers, and validate channel-to-channel phase behavior across the full operating-temperature range.

🎧

Professional Audio Effects Processor

The ADSP-21566KBCZ4 can implement high-channel-count audio effects, dynamics processing, equalization, and feedback cancellation in professional equipment. Its 400 MHz SHARC+ core provides deterministic execution for FIR and IIR filtering, FFT analysis, and adaptive parameter updates, while the combination of 640 KB L1 and 256 KB shared L2 supports time-critical audio state. DDR expands capacity for long impulse responses, multichannel presets, and waveform data. Designers should define interrupt latency and buffer boundaries precisely, verify real-time performance with the production sample rate, and preserve clean analog and digital power rails to avoid degrading signal quality.

🏭

Industrial Vibration Analysis

The ADSP-21566KBCZ4 is appropriate for industrial vibration and condition-monitoring systems that require FFT analysis, band filtering, envelope detection, and spectral feature extraction in real time. The 400 MHz SHARC+ core supports efficient fixed-point or floating-point math, while local L1 and L2 memory accelerates repeated access to acquisition buffers and coefficient tables. DDR can accommodate longer acquisition histories or multiple sensor channels. The design should define sampling accuracy, anti-alias filtering, synchronization between channels, and a bounded real-time scheduling model. Industrial deployments must also check the ordering suffix's temperature limits and protect the DSP from supply-transient and environmental stress.

সুপারিশকৃত পণ্যের সারসংক্ষেপ

ADSP-21566KBCZ4 Analog Devices ব্যবহৃত হয়: Automotive Active Noise Cancellation, Acoustic Echo Cancellation, Automotive Voice Interface, Microphone Array Beamforming, Professional Audio Effects Processor, Industrial Vibration Analysis, Industrial Vibration Analysis ADSP-21567KBCZ4 Higher-clock SHARC+ family option ব্যবহৃত হয়: Automotive Active Noise Cancellation, Automotive Voice Interface, Professional Audio Effects Processor ADSP-21565KBCZ4 Same-family SHARC+ processing option ব্যবহৃত হয়: Acoustic Echo Cancellation, Microphone Array Beamforming
What is the ADSP-21566KBCZ4?
The ADSP-21566KBCZ4 is a 400 MHz single-core SHARC+ digital signal processor with 640 KB of L1 memory and 256 KB of shared L2 SRAM. According to the Analog Devices product page, it uses the Super Harvard Architecture and supports both fixed-point and floating-point arithmetic. It is packaged in a 400-ball CSP_BGA measuring 17 x 17 mm and is intended for deterministic, low-latency real-time signal processing.
What are the key specifications of ADSP-21566KBCZ4 that engineers should know?
The ADSP-21566KBCZ4 combines a 400 MHz SHARC+ core, 64-bit fixed-point and floating-point processing, 640 KB of L1 memory, 256 KB of shared L2 SRAM, and DDR support. The Analog Devices product page identifies a 400-ball CSP_BGA package with 17 x 17 mm dimensions. Its local-memory capacity is particularly important for multichannel audio, adaptive filtering, FFT processing, and other workloads that repeatedly access coefficients and sample buffers.
What is the operating voltage of ADSP-21566KBCZ4?
The operating-voltage limits for the ADSP-21566KBCZ4 must be taken from the power-supply specification and pin-description tables in the Analog Devices data sheet. The manufacturer product page confirms the 400 MHz SHARC+ processor, 640 KB L1, 256 KB L2, DDR support, and 400-ball package, but it does not expose the complete core and I/O voltage ranges in the product summary. Use those limits to design the rail sequence and decoupling network.
Where can I download the ADSP-21566KBCZ4 datasheet PDF?
Download the ADSP-21566 data sheet and supporting documents from the official Analog Devices ADSP-21566 product page at https://www.analog.com/en/products/ADSP-21566.html. The manufacturer identifies the processor as a 400 MHz SHARC+ DSP with 640 KB L1, 256 KB shared L2 SRAM, DDR support, and a 400-ball CSP_BGA. Use the revision shown on that page for the authoritative electrical limits, pin descriptions, and interface requirements.
Where can I find the ADSP-21566KBCZ4 pinout?
The ADSP-21566KBCZ4 pinout is documented in the pin-description table and package drawing in the Analog Devices ADSP-21566 data sheet. The device uses a 400-ball CSP_BGA measuring 17 x 17 mm, so assignments must be made by ball number rather than by a conventional two-row package numbering scheme. Refer to the manufacturer's land-grid and ball-location diagrams when assigning power, ground, clock, DDR, and serial interfaces.
Is ADSP-21566KBCZ4 suitable for automotive audio processing?
The ADSP-21566KBCZ4 is suitable for real-time automotive audio workloads because its SHARC+ architecture targets deterministic, extremely low-latency processing. Analog Devices identifies active and road-noise cancellation, acoustic echo cancellation, noise reduction, voice interface processing, audio zoning, and in-car communications as target applications. Confirm temperature, voltage, qualification, and automotive-grade requirements against the specific ordering options before releasing a production design.
What can replace the ADSP-21566KBCZ4?
The closest same-package replacement is another correctly ordered ADSP-2156x device only after its clock rating, memory configuration, DDR interface, temperature grade, and pin definitions have been checked against the original design. No verified cross-manufacturer drop-in replacement was identified for the 400-ball CSP_BGA package. Because processor replacement also affects firmware, boot ROM, DDR layout, and peripherals, schematic and software compatibility must be reviewed before substitution.
Is ADSP-21566KBCZ4 the same as ADSP-21567KBCZ4?
No. The ADSP-21566KBCZ4 is the 400 MHz member, while the ADSP-21567KBCZ4 is the higher-clock member of the ADSP-2156x family. Their shared SHARC+ heritage and related 400-ball package family make them relevant alternatives, but the 800 MHz-versus-400 MHz clock distinction can affect timing, thermal design, power delivery, and firmware configuration. Do not assume software timing or board qualification transfers without verification.
ADSP-21566KBCZ4 vs ADSP-21567KBCZ4: which is better for real-time audio?
The ADSP-21567KBCZ4 is preferable when maximum processing throughput is the priority because its 800 MHz clock is twice the ADSP-21566KBCZ4's 400 MHz rating. The ADSP-21566KBCZ4 remains suitable when the required filter, FFT, or adaptive-processing workload fits within its 400 MHz performance envelope. The lower-clock device may simplify power and thermal design, but the actual choice should be based on measured cycle demand rather than clock frequency alone.
When should I choose ADSP-21566KBCZ4 over ADSP-21567KBCZ4?
Choose the ADSP-21566KBCZ4 when the algorithm has sufficient margin at 400 MHz and the design prioritizes lower clock-related power, simpler timing, and less demanding performance validation. Choose the ADSP-21567KBCZ4 when workload measurements show that the 400 MHz processor would lack throughput margin. Both belong to the SHARC+ ADSP-2156x family, but clock, thermal, firmware, and power-supply implications must be evaluated for the target application.
Is ADSP-21566KBCZ4 suitable for AEC and noise-reduction systems?
Yes, the ADSP-21566KBCZ4 is well suited to acoustic echo cancellation and noise reduction because the SHARC+ core is optimized for deterministic, low-latency real-time audio processing. Its 640 KB L1 and 256 KB shared L2 memory can support sample buffers, filter states, and coefficient access without relying entirely on external memory. DDR support is useful when several microphones, speakers, or adaptive filters require a larger working set.
Where can I buy ADSP-21566KBCZ4 and check the lead time?
Use the Request a Quote form on this page to request ADSP-21566KBCZ4 pricing, current availability, and production lead time. The target orderable device is a 400 MHz SHARC+ DSP in a 400-ball CSP_BGA package, and the manufacturer's product page lists sample and buy resources for the ADSP-21566 family. Specify the exact suffix, assembly option, quantity, and required date when submitting the request.
Is ADSP-21566KBCZ4 in stock?
Current stock should be requested through the Request a Quote form on this page because availability can change with order volume, lifecycle status, and regional inventory. Analog Devices lists ADSP-21566 as recommended for new designs, indicating an active family, while the ADSP-21566KBCZ4 ordering option is available through manufacturer and distribution channels. Include your required quantity, date code requirements, and shipment destination in the request.
What power and thermal considerations apply to ADSP-21566KBCZ4?
The ADSP-21566KBCZ4 requires a multilayer power-delivery network sized for the processor and its DDR interface, with local high-frequency decoupling placed close to the supply and ground balls. Thermal design should spread heat across the 17 x 17 mm CSP_BGA rather than concentrating it in one region. Exact dissipation depends on clock, memory traffic, I/O activity, voltage, and ambient temperature, so use the manufacturer power data for the final thermal calculation.
What is the best Analog Devices equivalent for ADSP-21566KBCZ4?
The best Analog Devices-family equivalent depends on whether the design needs the same 400 MHz operating point or additional processing margin. ADSP-21565KBCZ4 is the closest lower-complexity family alternative for applications that fit within its feature set, while ADSP-21567KBCZ4 provides twice the clock rate at 800 MHz. For a true drop-in decision, confirm the exact 400-ball pinout, DDR organization, boot behavior, peripherals, temperature grade, and application firmware.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা ADSP-21566KBCZ4 — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose the ADSP-21566KBCZ4 when a design needs a 400 MHz single-core SHARC+ processor with 640 KB of L1 memory, 256 KB of shared L2 SRAM, and DDR support in a 400-ball CSP_BGA. It is well aligned with automotive active-noise cancellation, acoustic echo cancellation, voice processing, microphone-array beamforming, and professional audio workloads. Select ADSP-21567KBCZ4 only when measured algorithm demand requires the additional throughput offered by its 800 MHz clock. Consider ADSP-21565KBCZ4 when the lower-complexity family member satisfies the required interface and memory configuration. The KBCZ1, KBCZ2, and KBCZ3 options preserve the 400 MHz core and package family, making temperature and grade requirements the deciding factors. For every option, verify ball assignments, DDR compatibility, boot behavior, peripheral mapping, thermal limits, and application firmware before committing to a drop-in replacement.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য ADSP-21565KBCZ4 ADSP-21567KBCZ4 ADSP-21566KBCZ1 ADSP-21566KBCZ2 ADSP-21566KBCZ3
Package 400-ball CSP_BGA (17 x 17 mm) 400-ball CSP_BGA (17 x 17 mm) 400-ball CSP_BGA (17 x 17 mm) 400-ball CSP_BGA (17 x 17 mm) 400-ball CSP_BGA (17 x 17 mm) 400-ball CSP_BGA (17 x 17 mm)
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Processor Type Single-core SHARC+ DSP Single-core SHARC+ DSP Single-core SHARC+ DSP Single-core SHARC+ DSP Single-core SHARC+ DSP Single-core SHARC+ DSP
Maximum Clock Frequency 400 MHz 400 MHz 800 MHz 400 MHz 400 MHz 400 MHz
External Memory Support DDR DDR DDR DDR DDR DDR
Arithmetic Width 64-bit fixed-point and floating-point 64-bit fixed-point and floating-point 64-bit fixed-point and floating-point 64-bit fixed-point and floating-point 64-bit fixed-point and floating-point 64-bit fixed-point and floating-point
Core Count 1 core 1 core 1 core 1 core 1 core 1 core

মূল পার্থক্যসমূহ

  • Provides the 400 MHz operating point required for deterministic audio workloads (বনামADSP-21567KBCZ4)
  • Matches the core clock and memory configuration of closely related grade options (বনামADSP-21566KBCZ3)
  • Targets real-time audio with substantial local memory (বনামADSP-21565KBCZ4)

ডিজাইন নোট

Implement the ADSP-21566KBCZ4 on a multilayer PCB with continuous power and ground planes, short ball-escape routes, and length-controlled DDR routing. The 400-ball CSP_BGA has no perimeter lead frames, so every signal transition depends on dense escape routing and via access. Use the Analog Devices land-grid and reference-layout guidance to match ball geometry, and keep clock, reset, and high-speed interface routes away from noisy switching nodes. Confirm layer transitions and return paths during signal-integrity simulation.

Separate or carefully sequence the processor's core and I/O supplies according to the manufacturer power-supply recommendations. Place high-frequency ceramic decoupling directly beneath or adjacent to the relevant BGA power balls, and reserve bulk capacitance near the power-entry point. Estimated: power loss equals the sum of rail voltage multiplied by rail current, so core clock, DDR activity, and I/O loading must be included when evaluating supply droop and thermal margin. Avoid applying one average current value to every operating condition.

Distribute heat across the full 17 x 17 mm BGA footprint rather than treating it as a point heat source. Use the manufacturer's thermal characterization data for board-layer count, copper area, airflow, and ambient temperature because junction rise depends strongly on the assembled PCB. Keep heat-generating regulators and memory devices away from the DSP when possible, preserve exposed thermal paths, and evaluate the maximum-clock and high-DDR-activity case. Estimated: junction temperature equals ambient temperature plus power dissipation multiplied by the assembly-specific thermal resistance.

Do not substitute an ADSP-2156x ordering suffix based only on clock speed. Confirm the exact 400-ball pinout, DDR organization and routing, boot configuration, peripheral assignments, clock requirements, temperature grade, and qualification status. The ADSP-21566KBCZ4 is a 400 MHz part, while ADSP-21567KBCZ4 provides 800 MHz; replacing one with the other can alter timing and power behavior even when the package geometry appears unchanged. Run hardware and firmware regression tests after any substitution.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

Analog Devices identifies ADSP-21566 as recommended for new designs. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification status for the exact ordering suffix before production release.

ডেটা যাচাই করা হয়েছে: 2026-11-15 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

ADSP-21566KBCZ4 datasheet ADSP-21566KBCZ4 datasheet pdf ADSP-21566KBCZ4 pinout ADSP-21566KBCZ4 equivalent ADSP-21566KBCZ4 replacement ADSP-21566KBCZ4 cross reference ADSP-21566 vs ADSP-21567 ADSP-21566 400MHz SHARC+ DSP ADSP-21566 400-ball CSP_BGA ADSP-21566 automotive audio DSP ADSP-21566 acoustic echo cancellation Analog Devices ADSP-21566KBCZ4 ADSP-21566KBCZ4 price ADSP-21566KBCZ4 stock

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Analog Devices ADSP-21566KBCZ4 ADSP-21566 ADSP-21565KBCZ4 ADSP-21567KBCZ4 ADSP-21566KBCZ1 ADSP-21566KBCZ2 ADSP-21566KBCZ3 SHARC+ digital signal processor DSP Super Harvard Architecture SIMD fixed-point arithmetic floating-point arithmetic L1 cache shared L2 SRAM DDR memory 400-ball CSP_BGA 17 x 17 mm package automotive active noise cancellation acoustic echo cancellation voice user interface microphone array beamforming real-time audio processing
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন