ADV7128KRZ80 - 10-Bit 80 MHz Video DAC | Analog Devices
MPN: ADV7128KRZ80 ✓ সক্রিয়ADV7128KRZ80 সারাংশ
A video DAC is a specialized data converter that translates parallel pixel data into a continuous analog video signal. It belongs to the digital-to-analog converter hierarchy, which falls under data converters, mixed-signal integrated circuits, and semiconductor signal-processing devices. Video DACs are used where an FPGA, ASIC, image processor, or graphics controller generates digital pixels that must drive an analog display or downstream video-processing circuit.
The core ADV7128 feature set includes 10-bit resolution, an 80 MHz pixel clock capability, a standard TTL-compatible input interface, and a high-impedance analog current-source output. Operation from a single +5 V supply simplifies system power design, while the external 1.23 V reference allows the converter's accuracy and output scale to be tied to a shared precision reference. The commercial-grade ordering option supports an ambient temperature range from 0°C to +70°C.
The monolithic implementation establishes a direct path from the 10-bit pixel input port to the analog output current source. The TTL input interface allows the device to operate alongside compatible digital video logic, while the high-impedance output supports downstream analog signal conditioning. The specified supply operating range of 4.75 V to 5.25 V provides 250 mV of headroom below and above the nominal +5 V rail, accommodating normal supply variation.
Typical applications include RGB video generation, broadcast and professional video equipment, graphics and imaging systems, digital display test systems, and FPGA-based video output cards. In each case, the ADV7128 can generate an analog video waveform from parallel pixel data when the receiving equipment still requires a conventional analog input.
When designing around the ADV7128, preserve adequate grounding and short analog-output paths, and follow the pin-description and reference-circuit recommendations in the manufacturer datasheet. The external 1.23 V reference must be clean and stable because reference noise can appear directly in the reconstructed video output. Supply bypassing and output-conversion circuitry should be evaluated together to avoid limiting the converter's intended video performance.
This page combines the manufacturer specifications with practical architecture guidance, drop-in family candidates, sourcing information, and design notes. It also distinguishes orderable variants by temperature grade and package while preserving the strict requirement that every proposed replacement retain the same 28-lead SOIC footprint.
এর জন্য ড্রপ-ইন বিকল্প ADV7128KRZ80 — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
ADV7128KRZ
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
ADV7128JRZ
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
ADV7128JRZ80
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
ADV7128KRZ80 সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Converter Type | Video digital-to-analog converter |
| রেজোলিউশন | 10 bit |
| Maximum Pixel Clock Rate | 80 MHz |
| Pixel Input Port Width | 10 bit |
| Nominal Supply Voltage | +5 V |
| Supply Voltage Range | 4.75 V to 5.25 V |
| External Reference Voltage | 1.23 V |
| Input Interface | Standard TTL |
| Analog Output | High-impedance current source |
| Resolution Step | 1 LSB |
| অপারেটিং তাপমাত্রার পরিসর | 0°C to +70°C |
| Temperature Grade | Commercial |
| প্যাকেজ | 28-lead SOIC |
| Terminal Count | 28 pins |
| Terminal Form | Gull wing |
| Package Shape | Rectangular |
| মাউন্টিং টাইপ | Surface mount |
| Process Technology | CMOS |
| RoHS স্ট্যাটাস | RoHS compliant |
| Integrated Functional Blocks | 1 video DAC, 1 TTL input interface, 1 current-source output |
| Minimum Operating Temperature | 0°C |
| Maximum Operating Temperature | +70°C |
ADV7128KRZ80 rectangular পিন কনফিগারেশন গাইড
ADV7128KRZ80 (rectangular প্যাকেজ)-এর পিন কনফিগারেশন। এই অ্যানালগ কম্পোনেন্টে ইনপুট, আউটপুট ও পাওয়ার সাপ্লাই পিন রয়েছে। অফসেট নাল, কম্পেনসেশন ও এনেবল পিন কনফিগারেশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। সিগন্যাল কন্ডিশনিং ও অ্যামপ্লিফায়ার সার্কিটের জন্য আদর্শ।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি ADV7128KRZ80.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
ADV7128KRZ80 এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: RGB Video Signal Generation, Professional Video Test Equipment, FPGA-Based Video Output Cards, Broadcast Video Conversion, Digital Display Test and Calibration, Industrial Imaging and Graphics.
RGB Video Signal Generation
The ADV7128KRZ80 fits RGB video generation because it accepts a 10-bit pixel input, supports an 80 MHz pixel clock, and produces a high-impedance analog current-source output. Place it between parallel RGB pixel logic and the output-conversion network, then synchronize its pixel clock and control signals to the source video timing. The single +5 V supply and external 1.23 V reference simplify the analog support circuitry. The main design consideration is maintaining equal signal timing across the pixel bus while keeping the reference and analog-output paths compact enough to preserve video fidelity.
সুপারিশকৃত
Professional Video Test Equipment
ADV7128KRZ80 can serve as the programmable video DAC in professional video test equipment that must generate analog output from digital test patterns. Its 10-bit pixel interface and 80 MHz pixel-rate capability provide a defined conversion format for high-resolution test sequences. A field-programmable video source can drive the pixel bus, while the ADV7128 converts the pattern into an analog signal for display or video-processing analysis. Use a stable 1.23 V reference and place output-conversion components near the DAC so that test-equipment accuracy is not limited by board-level noise or timing skew.
সুপারিশকৃত
FPGA-Based Video Output Cards
The ADV7128KRZ80 is appropriate for FPGA-based video output cards where parallel pixel logic must become an analog video waveform. The FPGA can generate RGB data and timing, while the 10-bit DAC preserves the digital pixel code and converts it through its high-impedance current-source output. An 80 MHz pixel clock supports demanding video timing, although the complete system must meet the converter's input setup and hold requirements. Keep the pixel bus and clock routing compact, isolate the analog return path appropriately, and follow the manufacturer reference layout to reduce conversion error.
সুপারিশকৃত
Broadcast Video Conversion
ADV7128KRZ80 can support legacy broadcast and professional video interfaces that accept an analog signal generated from digital pixel data. The converter's 10-bit resolution, 80 MHz pixel-clock capability, standard TTL input interface, and high-impedance current output suit digital video backplanes and conversion equipment. The external 1.23 V reference should be shared carefully or generated with low noise because reference variation affects the entire converted signal. Grounding and output-stage design remain critical in broadcast infrastructure, particularly when long external cables or multiple conversion stages are present.
সুপারিশকৃত
Digital Display Test and Calibration
The ADV7128KRZ80 is useful in digital display test and calibration systems that generate controlled analog video stimuli from digital color patterns. Its 10-bit pixel input supports programmable color-code generation, while the 80 MHz pixel rate accommodates demanding test timing. The DAC output can feed a display or measurement instrument through the appropriate current-to-voltage conversion network. For accurate calibration, use a clean 1.23 V reference, minimize ground offsets, and characterize the complete output chain rather than attributing every display deviation solely to the converter.
সুপারিশকৃত
Industrial Imaging and Graphics
ADV7128KRZ80 can serve as the video-output stage in industrial imaging and graphics equipment where a controller produces digital frames for an analog display. The 10-bit pixel input allows image data to pass through without reducing the specified digital code width, and the 80 MHz pixel rate supports high-speed frame timing. The converter's commercial 0°C to +70°C range is appropriate for controlled indoor equipment, but enclosure temperature must be checked at the worst case. Good supply decoupling, reference placement, and short analog routing are essential for maintaining a stable image across the system.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা ADV7128KRZ80 — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | ADV7128KRZ | ADV7128JRZ | ADV7128JRZ80 |
|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | 28-lead SOIC | 28-lead SOIC - same package | 28-lead SOIC - same package | 28-lead SOIC - same package |
মূল পার্থক্যসমূহ
- Commercial 80 MHz order with a defined 0°C to +70°C range (বনামADV7128JRZ80)
- Direct 10-bit video-DAC function with standard TTL input (বনামADV7128KRZ)
- Single +5 V operation with an external precision reference (বনামADV7128JRZ)
ডিজাইন নোট
Place the supply bypass capacitor adjacent to the ADV7128 power and ground pins, and keep the 4.75 V to 5.25 V input rail within the manufacturer's limits. The nominal operating point is +5 V, but the converter still needs a low-impedance return path and effective high-frequency decoupling. Use the manufacturer datasheet's recommended bypass arrangement rather than relying on a distant bulk capacitor, because an external 1.23 V reference and the high-impedance output make board-level supply and ground behavior significant.
Route the 10-bit pixel bus and pixel clock as a compact, matched group to minimize relative timing skew across the converter inputs. Keep the external 1.23 V reference and its decoupling close to the reference pin, and avoid routing the high-impedance analog output beneath digital clocks or switching nodes. Connect the analog ground path to the device ground using a short, low-impedance route and follow the pin-description table in the manufacturer datasheet when assigning tracks.
Do not treat ADV7128KRZ, ADV7128JRZ, ADV7128JRZ80, and ADV7128KRZ80 as identical without checking the ordering information, temperature grade, and lifecycle status. The suffixes encode meaningful ordering differences even though the devices belong to the same 10-bit video-DAC family. Before substitution, verify the 80 MHz rating, supply range, external 1.23 V reference requirement, pin definitions, analog output arrangement, and the exact 28-lead SOIC footprint in the manufacturer documentation.
কমপ্লায়েন্স তথ্য
The commercial-part listing identifies the device as RoHS compliant. No additional REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification statement was established.