AKM (Asahi Kasei Microdevices)

AK4250VT - Capacitorless Video Amplifier with LPF | Asahi Kasei

MPN: AK4250VT ✓ সক্রিয়
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

AK4250VT সারাংশ

The Asahi Kasei Microdevices AK4250VT is a single-channel video amplifier with an integrated low-pass filter, a 2.7 V to 3.6 V supply range, and an 8-pin lead-free SOP package. Its output-coupling-capacitorless architecture eliminates the external output coupling capacitor normally used to block DC voltage while passing a composite video signal. The device also includes a negative-power-supply circuit, allowing its output to support video signals without the same external biasing arrangement required by conventional single-supply amplifiers.

A video amplifier is an analog signal-conditioning IC within the broader video-processing IC and interface IC categories. It adjusts a composite video signal for propagation through cables, converters, displays, or recording equipment. A low-pass filter attenuates higher-frequency components that can produce ringing, pulse-width distortion, or unwanted transitions. The AK4250VT combines these functions in one compact package, reducing the number of discrete passive components required around a video output stage.

The principal features of the AK4250VT include its 2.7 V to 3.6 V operating supply, integrated low-pass filtering, removal of the external output coupling capacitor, and integrated negative-power-supply circuitry. The operating temperature range extends from -40°C to +85°C. Its SOP-8 construction supports conventional surface-mount assembly and provides a practical route to compact consumer, industrial, and AV-equipment designs where video level conditioning and filtering are required close to a connector or system boundary.

Technically, the AK4250VT is designed for single-channel composite-video signal conditioning. The low-pass filter limits high-frequency content at the amplifier output, while the internal negative-supply implementation provides the biasing needed for capacitorless operation. Because the device operates from a 3.3 V-class supply, board-level design should verify that source and destination video levels, impedance requirements, grounding, and connector-return paths remain compatible with the system rather than relying only on supply-voltage compatibility.

Typical uses include composite-video output stages in DVD and set-top equipment, video capture and playback systems, industrial inspection equipment, display-interface boards, and external video converters. The AK4250VT is particularly useful where an output coupling capacitor would add cost, board area, or impedance to the signal path and where a compact integrated low-pass filter can simplify the analog output section.

For layout, place the decoupling capacitor and the device close to the power pins, and keep video traces short and away from switching nodes. Treat the connector ground and signal return as a controlled reference path to limit video noise and ground offsets. Confirm the output loading, termination, and downstream input impedance because external video networks can materially affect gain, bandwidth, and signal integrity.

This product page combines the AK4250VT technical identity, verified operating limits, package information, design guidance, application fit, and substitution analysis. It also separates confirmed drop-in replacements from related devices that may differ in footprint or function, helping engineers make a PCB-compatible decision before committing a new design.

এর জন্য ড্রপ-ইন বিকল্প AK4250VT — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই পণ্যের জন্য কোনো ড্রপ-ইন বিকল্প পাওয়া যায়নি।

বিকল্প অনুরোধ করুন

AK4250VT সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

কোনো স্পেসিফিকেশন পাওয়া যায়নি

AK4250VT standard পিন কনফিগারেশন গাইড

AK4250VT (standard প্যাকেজ)-এর পিন কনফিগারেশন। এই অ্যানালগ কম্পোনেন্টে ইনপুট, আউটপুট ও পাওয়ার সাপ্লাই পিন রয়েছে। অফসেট নাল, কম্পেনসেশন ও এনেবল পিন কনফিগারেশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। সিগন্যাল কন্ডিশনিং ও অ্যামপ্লিফায়ার সার্কিটের জন্য আদর্শ।

AK4250VT-এর জন্য standard প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি AK4250VT.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

AK4250VT এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Composite Video Output Conditioning, Video Capture Interface, Set-Top Box Video Output, Industrial Inspection Video Interface, External Video Converter, Video Playback and Display Interface.

📺

Composite Video Output Conditioning

The AK4250VT fits a composite-video output stage because it combines a single-channel video amplifier with an integrated low-pass filter in an 8-pin SOP package. Its 2.7 V to 3.6 V operating range supports 3.3 V video systems, while the capacitorless output removes the external output coupling capacitor normally required after a conventional amplifier. The integrated LPF helps control high-frequency content before the signal reaches a connector. Confirm source amplitude, destination impedance, and video timing because those parameters determine whether the device's gain and loading behavior suits the channel.

🎥

Video Capture Interface

The AK4250VT can condition a composite-video signal in a capture interface where component count and board area are important. Its single-channel topology and integrated LPF reduce the need for separate filtering around one video path, while the 2.7 V to 3.6 V supply range fits low-voltage digital capture hardware. The internal negative-supply circuit and capacitorless output arrangement simplify the output network. Before deployment, verify input sensitivity, output swing, and compatibility with the capture device because these video parameters are not interchangeable across all amplifier families.

📺

Set-Top Box Video Output

A set-top or media device with an analog composite output can use the AK4250VT to provide a compact conditioning stage. The 2.7 V to 3.6 V range operates directly from a 3.3 V-class rail, and the SOP-8 package supports standard surface-mount assembly. Its integrated low-pass filter addresses unwanted high-frequency signal content without a separate filter stage. The capacitorless output reduces external component count around the connector path. Engineering validation should include the required video gain, cable termination, channel noise, and whether the downstream receiver expects a particular sync or blanking level.

🏭

Industrial Inspection Video Interface

The AK4250VT is suitable for a compact analog-video interface within industrial inspection equipment when the system operates within -40°C to +85°C and uses a 2.7 V to 3.6 V supply. The integrated LPF can condition a video channel near a cable connector, and the capacitorless output lowers passive-component count in space-constrained electronics. Industrial suitability still requires system-level checks for electromagnetic interference, ESD protection, grounding, connector retention, and long-cable behavior. These concerns are not resolved by the IC specifications alone and should be validated at the enclosure and system level.

🔧

External Video Converter

An external converter that converts or regenerates composite video can benefit from the AK4250VT's integrated amplifier and low-pass filter. The 8-pin SOP package permits a small circuit area, while the 2.7 V to 3.6 V supply range suits portable and low-voltage converter designs. Capacitorless output operation can simplify the board around a connector, but downstream loading must be checked carefully because long cable runs, termination networks, and converter inputs can create reflections or alter signal amplitude. Add connector protection and controlled grounding according to the enclosure's electromagnetic-compatibility requirements.

📱

Video Playback and Display Interface

The AK4250VT can support playback, conversion, or display-interface boards that require a conditioned composite-video channel. Its integrated low-pass filter helps attenuate high-frequency components, and the internal negative-power-supply circuit enables operation without an external output coupling capacitor. The compact SOP-8 package leaves room for connector routing and supporting circuitry in portable media products. Before selecting it, compare the required video gain and frequency response against the target display or capture receiver, and verify that the connector reference path does not introduce ground bounce or visible timing disturbance.

What is the AK4250VT?
The AK4250VT is a single-channel video amplifier with an integrated low-pass filter, operating from 2.7 V to 3.6 V in an 8-pin SOP package. According to the manufacturer datasheet, the output-coupling-capacitorless design eliminates the external capacitor normally placed between the amplifier and a video output, while the integrated negative-power-supply circuit supports the required output biasing.
What is the supply voltage of AK4250VT?
The AK4250VT operates from 2.7 V to 3.6 V, making it suitable for 3.3 V video-interface systems. This range appears in the AK4250VT manufacturer datasheet and its indexed specifications. Designers should keep the board supply within these limits under startup, load, and temperature conditions, and should verify that downstream video circuits use compatible signal levels.
Where can I download the AK4250VT datasheet PDF?
The AK4250VT manufacturer datasheet can be downloaded from the Asahi Kasei Microdevices PDF link listed with this product, while a separate indexed copy is available from Datasheets.com. The document is the primary source for the 2.7 V to 3.6 V supply range, SOP-8 package, video-amplifier function, integrated LPF, and capacitorless-output architecture. Check the document revision and device ordering information before releasing a production design.
Where is the AK4250VT pinout?
The AK4250VT pin assignments are identified in the pin-description section of the manufacturer datasheet. The device uses an 8-pin SOP package, but a complete pin-number-to-function mapping is not reproduced in the indexed material. Use the manufacturer pin-description table when assigning PCB nets, particularly the supply, ground, video input, and video output connections.
Does the AK4250VT need an output coupling capacitor?
No, the AK4250VT does not require the conventional external output coupling capacitor. The manufacturer describes it as an output-coupling-capacitorless video amplifier with LPF and states that its internal negative-power-supply circuit provides the required biasing. This reduces passive-component count and board area, although output loading and downstream impedance still require normal video-interface verification.
What applications are suitable for the AK4250VT?
The AK4250VT is suitable for composite-video signal conditioning in consumer AV equipment, video converters, capture systems, industrial inspection equipment, and display-interface boards. Its integrated low-pass filter helps reject high-frequency content, while the capacitorless output simplifies the analog output stage. The key requirement is a compatible 2.7 V to 3.6 V supply and a downstream video load compatible with the device's output characteristics.
What is the operating temperature range of AK4250VT?
The AK4250VT is specified for operation from -40°C to +85°C. This range covers commercial and industrial ambient conditions when the board enclosure does not cause additional temperature rise. The maximum is a device operating-temperature rating, not a guarantee that any particular assembly remains below 85°C; thermal analysis should account for nearby heat sources and enclosure conditions.
What can replace the AK4250VT?
A genuine drop-in replacement must use the same SOP-8 footprint, provide the same pin functions, operate from 2.7 V to 3.6 V, and preserve the capacitorless video-output behavior. No independently verified cross-manufacturer replacement was identified for this part. Treat generic video amplifiers as functional candidates rather than drop-in substitutes until their pin assignments, supply limits, output biasing, bandwidth, and impedance have been checked.
Is AK4250VT the same as AK4250VU?
The AK4250VT and AK4250VU are both AK4250-family orderable versions referenced in the manufacturer material, but that information does not by itself establish identical packaging or pin compatibility. Compare the ordering codes, package drawings, pin descriptions, operating limits, and reel or tube packing information in the manufacturer datasheet before treating either version as a substitute for the other.
AK4250VT versus a conventional video amplifier - which is better?
The AK4250VT is preferable when a compact 2.7 V to 3.6 V design benefits from an integrated low-pass filter and elimination of the external output coupling capacitor. A conventional amplifier may be preferable when its exact gain, bandwidth, output impedance, and standard biasing arrangement better match an existing design. The deciding factors are circuit compatibility and signal performance rather than function alone.
When should I choose AK4250VT for a video design?
Choose the AK4250VT when a single video channel requires low-pass filtering, operation from a 2.7 V to 3.6 V supply, and a compact surface-mount solution without an external output coupling capacitor. Confirm that its gain, output impedance, video bandwidth, and input level meet the target system. It is less suitable when those electrical requirements differ even if the board outline appears similar.
Is AK4250VT suitable for industrial video equipment?
The AK4250VT can suit industrial video equipment operated within its -40°C to +85°C specification and 2.7 V to 3.6 V supply limits. Its integrated LPF and capacitorless output can simplify an analog video board. For deployed industrial systems, also validate electromagnetic immunity, ESD protection, connector reliability, temperature rise, and any customer-specific qualification requirements.
Where can I buy AK4250VT and what is its price?
Use the Request a Quote form on this page to request current AK4250VT pricing, stock, minimum order quantity, and lead time. The commercial inquiry can specify the required quantity, SOP-8 packing preference, and destination country. The form is the appropriate route for a quote because current transactional pricing and supply can change independently of the device's technical specifications.
How much is the AK4250VT lead time?
The current AK4250VT lead time depends on stock, production planning, order quantity, and selected packing format. Request the latest lead time through the Request a Quote form on this page and include your required quantity and target delivery date. The manufacturer datasheet describes the device and its operating limits but does not establish a production lead-time commitment.
Is AK4250VT in stock?
AK4250VT availability changes with order volume, market demand, and supply-chain conditions. Use the Request a Quote form on this page for a current stock response, minimum order quantity, and delivery estimate. Avoid treating an inventory figure seen in an individual listing as a guaranteed allocation, particularly when quantities above the quoted amount or a specific delivery schedule are required.
What are the key specifications of AK4250VT that engineers should know?
The AK4250VT is a 2.7 V to 3.6 V, single-channel video amplifier with an integrated low-pass filter in an 8-pin lead-free SOP package. Its defining implementation feature is capacitorless output operation, supported by an internal negative-power-supply circuit, with a -40°C to +85°C operating range. These characteristics make it most relevant to compact composite-video interfaces where passive-component count and board area are constrained.
What is the best cross-brand equivalent for AK4250VT?
No cross-brand equivalent can be presented as a verified drop-in replacement because the available cross-reference results do not identify a candidate with a confirmed identical pinout and electrical behavior. Before substituting, require the same SOP-8 footprint and pin functions, a 2.7 V to 3.6 V supply range, capacitorless output compatibility, equivalent gain and bandwidth, and suitable output impedance. Functional similarity alone does not establish PCB compatibility.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা AK4250VT — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose the AK4250VT for a single composite-video channel that operates from 2.7 V to 3.6 V and benefits from integrated low-pass filtering and capacitorless output operation. It is particularly useful when reducing external passive-component count matters and the board can use an 8-pin SOP footprint. Before finalizing the choice, verify video gain, signal polarity, bandwidth, input and output impedance, and downstream loading against the target system. Do not substitute a generic SOP-8 amplifier solely from package dimensions: confirm identical pin functions and the negative-supply behavior needed for capacitorless operation. No independently verified drop-in cross-brand alternative was identified, so an existing design should retain the AK4250VT unless the manufacturer publishes an approved ordering code or a candidate undergoes complete electrical and PCB compatibility review.

ডিজাইন নোট

Place the AK4250VT close to the video source and destination circuitry, and route the video signal as a short, controlled trace. Keep switching nodes, inductors, and high-current return paths away from the video input and output. A continuous ground plane under the device can help provide a low-impedance return path, but high-current component returns should not be routed through the sensitive analog-video region.

Connect a local decoupling capacitor close to the supply pins and follow the manufacturer layout and capacitor recommendations in the datasheet. The AK4250VT supports a 2.7 V to 3.6 V supply, so the rail must remain within that range during startup and load transients. Verify the power source can support the device and any downstream video circuitry without causing excessive supply ripple or noise injection into the video path.

Treat the video connector return as part of the signal path. Use the shortest practical ground connection between the source, amplifier, and connector, and avoid sharing a narrow return segment with motors, relays, or switching converters. If the output drives a cable or long trace, verify termination, source impedance, and receiver impedance in the assembled board because capacitive loading can alter video rise time and cause ringing.

Do not assume that a generic SOP-8 video amplifier is pin-compatible with the AK4250VT. Before substitution, compare the pin-description table, supply pins, signal polarity, gain, bandwidth, output biasing, low-pass response, and output impedance. The capacitorless output depends on the AK4250's internal negative-power-supply architecture, so an amplifier that merely has the same package dimensions may require different external components.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
লিড ফ্রি
Yes
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The indexed AK4250VT specifications identify the SOP-8 package as lead-free. RoHS, REACH, halogen-free, and conflict-minerals declarations require confirmation from the manufacturer.

ডেটা যাচাই করা হয়েছে: 2026-11-16 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

AK4250 vga AK4250VT datasheet AK4250VT pinout AK4250VT datasheet pdf AK4250VT equivalent AK4250VT replacement AK4250VT SOP-8 video amplifier AK4250VT low pass filter AK4250VT 2.7V 3.6V AK4250VT capacitorless video amp AK4250VT price AK4250VT stock

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Asahi Kasei Microdevices AK4250VT AK4250VU AK4250 video amplifier single-channel video amplifier analog video amplifier low-pass filter LPF composite video VGA video signal conditioning interface IC amplifier IC semiconductor SOP-8 8-pin SOP surface-mount package output coupling capacitor negative power supply circuit supply voltage operating temperature low-pass filter cutoff frequency video gain
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন