AKM Semiconductor

AK5373EQ - 24-Bit Stereo USB 2.0 ADC | AKM Semiconductor

MPN: AK5373EQ ✗ জীবনকালের সমাপ্তি
3 V to 3.6 V Vdss LFQP / LQFP-48 Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

AK5373EQ সারাংশ

AKM Semiconductor AK5373EQ is a 24-bit stereo analog-to-digital converter with a 48 kHz sampling rate, integrated USB 2.0 interface, USB transceiver, and audio-class processing in a 48-pin LQFP package measuring 7 x 7 mm with a 0.50 mm pitch. The device operates from a 3 V to 3.6 V supply and is specified for commercial temperatures from -10°C to 70°C.

An audio ADC is an interface IC that converts left- and right-channel analog audio into digital samples for processing, storage, transmission, or playback. The AK5373EQ combines two audio conversion channels with a digital USB interface, placing the analog front end, conversion function, clocking, and USB connectivity within one device. Its 24-bit resolution preserves a large dynamic range for consumer audio, USB microphones, and compact digital recording equipment.

The AK5373EQ supports 48 kHz sampling, a common rate for CD-quality stereo audio and USB playback. Its integrated USB 2.0 interface and USB transceiver reduce the need for a separate USB controller in a simple audio peripheral. The 3 V to 3.6 V analog and digital supply range suits low-voltage portable systems in which USB-powered equipment must operate from limited rail headroom. The 48-pin LQFP provides all 48 package positions required by the device footprint.

The AKM product description identifies the AK5373EQ as a stereo A/D converter with an integrated USB serial interface engine, USB transceiver, and audio-class processing. This integration supports a compact USB audio architecture while reducing board-level interface complexity. Commercial screening and the -10°C to 70°C operating range target room-temperature consumer and communication equipment rather than extended industrial or automotive environments.

Typical uses include USB stereo microphones, digital audio recorders, USB audio adapters, computer peripherals, and compact multimedia input devices. In these systems, the converter can accept two analog audio channels, sample them at 48 kHz, and present the digital stream through USB. The integrated interface is especially useful where enclosure space, external component count, and direct host connectivity are priorities.

Design the analog input network for the intended source impedance and signal level, and keep high-speed USB routing away from sensitive audio traces. Place the required decoupling capacitors close to their associated supply pins, observe the manufacturer's recommended clock and interface configuration, and confirm enumeration behavior with the target USB host. PCB rework is necessary because the AK5373EQ uses a 48-pin LQFP rather than a leadless package.

This product record combines the verified electrical specifications, package details, lifecycle information, application guidance, and design considerations for engineers evaluating the obsolete AK5373EQ. It also distinguishes the device from less suitable replacements by emphasizing its exact 24-bit, 48 kHz, USB 2.0 stereo-ADC configuration and the need to confirm pin, clock, and USB compatibility before substitution.

এর জন্য ড্রপ-ইন বিকল্প AK5373EQ — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible AK5373EQ (একই form factor এবং footprint) — পার্থক্য রয়েছে Audio Processing, Sampling Rate.

AKM (Asahi Kasei Microdevices)
Audio Processing: Mute and volume control
Sampling Rate: 8 kHz to 48 kHz
এর সাথে তুলনা করুন AK5373EQ →

AK5371AVQ

✅ ড্রপ-ইন
AKM (Asahi Kasei Microdevices)
📦 48-LQFP (7 x 7 mm)
Stereo audio ADC with USB interface · 16 bit · 2 channels · 8 kHz to 48 kHz · 84 dBA at 44.1 kHz and 0 dB gain · 3 V to 3.6 V · USB 1.1-compatible device interface · Integrated

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

AK5373EQ সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Device Type Stereo A/D converter with USB interface
ADC Resolution 24 bit
Number of Channels 2 channels
স্যাম্পলিং রেট 48 kHz
Data Interface USB 2.0
Integrated Interface USB serial interface engine and USB transceiver
Audio Processing Integrated audio-class processing
Analog and Digital Supply Voltage 3 V to 3.6 V
অপারেটিং তাপমাত্রা -10°C to 70°C
Screening Level Commercial
Package Type LFQP / LQFP-48
Package Body Size 7 x 7 mm
Lead Pitch 0.50 mm
পিন সংখ্যা 48 pins
Package Material Plastic, halogen free
মাউন্টিং টাইপ Surface mount

AK5373EQ plastic, halogen free পিন কনফিগারেশন গাইড

AK5373EQ (plastic, halogen free প্যাকেজ)-এর পিন কনফিগারেশন। এই অ্যানালগ কম্পোনেন্টে ইনপুট, আউটপুট ও পাওয়ার সাপ্লাই পিন রয়েছে। অফসেট নাল, কম্পেনসেশন ও এনেবল পিন কনফিগারেশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। সিগন্যাল কন্ডিশনিং ও অ্যামপ্লিফায়ার সার্কিটের জন্য আদর্শ।

AK5373EQ-এর জন্য plastic, halogen free প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি AK5373EQ.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

AK5373EQ এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: USB Stereo Microphone, USB Audio Adapter, Digital Audio Recorder, Computer Audio Peripherals, USB Audio Test and Monitoring, Consumer Audio Capture Dongle.

🎙️

USB Stereo Microphone

The AK5373EQ fits a two-channel USB microphone because it combines a 24-bit stereo ADC, 48 kHz sampling, USB 2.0 connectivity, and audio-class processing. Two analog capture paths can feed the converter before its digital samples are transferred directly to a computer or mobile host. The 3 V to 3.6 V operating range aligns with compact USB-powered equipment, while the 48-pin LQFP keeps the converter solution compact without relying on an external USB interface controller.

🔌

USB Audio Adapter

The AK5373EQ is appropriate for a compact USB-to-analog audio adapter that accepts two analog inputs and exposes 24-bit, 48 kHz audio to a USB host. Its integrated USB serial interface engine, transceiver, and audio-class processing reduce the number of separate interface functions required in a simple peripheral. The principal design work lies in the analog input conditioning, stable clocking, impedance-controlled USB routing, and host enumeration behavior specified by AKM.

🎙️

Digital Audio Recorder

A two-channel digital recorder can use the AK5373EQ to convert line or microphone-level analog signals into 24-bit digital samples at 48 kHz. This rate and resolution are well aligned with music capture, voice recording, and playback-oriented storage systems. The integrated USB path can transfer the recorded stream directly to a computer, but the product must also provide suitable analog gain control, input protection, clock support, storage workflow, and host-compatible USB class behavior.

🖥️

Computer Audio Peripherals

The AK5373EQ can support a dedicated computer-audio peripheral that converts two analog inputs and connects over USB 2.0 without a separate USB controller. Its 48 kHz, 24-bit conversion provides a conventional stereo format for conferencing, monitoring, and media-capture products. Because the AK5373EQ is obsolete, it is most appropriate when maintaining an established USB peripheral platform or reusing a qualified 48-LQFP layout rather than starting a broad new consumer product program.

📺

USB Audio Test and Monitoring

The AK5373EQ is suitable for a dedicated USB audio monitoring fixture requiring two synchronized analog capture channels and a direct host connection. Its 24-bit conversion and 48 kHz sampling allow a test system to capture stereo program material or line-level sources without a separate USB interface block. Measurement quality still depends on low-noise analog amplification, controlled source impedance, clock jitter, grounding, and isolation of the USB differential pair from the input network.

📱

Consumer Audio Capture Dongle

The AK5373EQ can serve as the conversion and USB core of a small consumer audio-capture dongle with two analog channels. Its integrated USB transceiver and audio-class processing help limit external component count, while the 3 V to 3.6 V supply range supports compact USB-powered construction. A successful product still needs low-power startup behavior, stable USB bus power, ESD protection arranged without excessive capacitance, and analog filtering tailored to the intended microphone or line source.

What are the key specifications of AK5373EQ that engineers should know?
The AK5373EQ is a 24-bit stereo ADC with a 48 kHz sampling rate and an integrated USB 2.0 interface. It includes a USB serial interface engine, USB transceiver, and audio-class processing, operates from 3 V to 3.6 V, and is packaged in a 48-pin LQFP measuring 7 x 7 mm with 0.50 mm lead pitch. According to the AKM product description, these functions provide a compact USB audio-conversion solution without a separate USB interface IC.
What is the operating voltage of AK5373EQ?
The AK5373EQ operates from 3 V to 3.6 V for its analog and digital supply. According to the AKM technical description, this single low-voltage range supports USB-connected audio products with limited supply headroom. Board-level implementation should maintain the required bypass capacitance at each supply connection and keep sensitive analog and digital return paths properly arranged to limit coupling between the converter and USB circuitry.
What is the sampling rate and resolution of AK5373EQ?
The AK5373EQ converts two audio channels at 24-bit resolution and 48 kHz sampling. According to the AKM product description, 48 kHz is suitable for CD-rate stereo audio, USB playback, and digital recording applications. The 24-bit conversion format provides substantially more code depth than conventional 16-bit audio systems, although the usable signal-to-noise ratio also depends on the analog front end, source impedance, clocking, and PCB layout.
Where can I download the AK5373EQ datasheet PDF?
The AK5373EQ datasheet PDF is linked from the AKM datasheet entry on the AllDataSheet site. Use that document to confirm the complete pin-description table, electrical limits, clock requirements, USB behavior, application circuit, and recommended external components before releasing a PCB or production design. The AKM product description identifies the device as a 24-bit stereo USB ADC, while the detailed connection and timing information should be taken directly from the manufacturer datasheet.
Where can I find the AK5373EQ pinout?
The AK5373EQ pinout is documented in the manufacturer datasheet under the package-pin description and application information. The device uses a 48-pin LQFP package, so a PCB footprint with 48 electrical positions and a 0.50 mm lead pitch is required. Do not infer a complete pin map from the package name alone; verify analog inputs, supplies, grounds, clock connections, and USB data lines against the current manufacturer datasheet.
What can replace the obsolete AK5373EQ?
No verified, pin-to-pin drop-in replacement was established for the AK5373EQ. A device marketed as an equivalent must match the 48-pin LQFP footprint, 24-bit stereo conversion, 48 kHz sampling, 3 V to 3.6 V supply, USB 2.0 interface, clock arrangement, and host-class behavior. The AK5371AVQ appears in a published specification comparison, but pin compatibility and USB implementation must be verified before treating it as a drop-in replacement.
Is AK5373EQ the same as AK5371AVQ?
The AK5373EQ and AK5371AVQ are related AKM devices, but they cannot be treated as identical without a pin- and function-level comparison. The AK5373EQ is identified as a 24-bit, 48 kHz stereo USB ADC in a 48-LQFP package, while the published comparison identifies differences in voltage range, power consumption, and package size. Use the AKM datasheets and the comparison document to verify each pin, supply rail, interface function, and footprint before considering a replacement.
AK5373EQ vs AK5371AVQ: which is better for a USB audio adapter?
The AK5373EQ is the more directly documented choice for a 48 kHz USB stereo adapter because AKM describes it as a 24-bit stereo ADC with an integrated USB 2.0 interface, serial interface engine, transceiver, and audio-class processing. The AK5371AVQ differs in voltage range, power consumption, and package characteristics, so it may fit a different design. The better choice depends on whether its complete electrical and pin configuration matches the intended USB audio architecture.
When should I choose AK5373EQ over another USB audio ADC?
Choose the AK5373EQ when an existing design specifically calls for a 24-bit, 48 kHz stereo ADC with USB 2.0 connectivity and a 48-pin LQFP footprint. Its integrated serial interface engine, transceiver, and audio-class processing can simplify a USB audio peripheral. Because the device is obsolete, choose it primarily for maintenance or board-compatibility work, and avoid new platform designs unless an internal procurement and longevity program can support the lifecycle status.
Is AK5373EQ suitable for USB microphones and digital audio recorders?
The AK5373EQ is suitable for USB microphones and compact digital audio recorders that use two analog audio channels, a 48 kHz sampling rate, and a direct USB 2.0 connection. The integrated USB interface reduces board complexity compared with a separate USB controller arrangement. The analog headroom, input conditioning, and achievable noise floor still depend on the microphone preamplifier or line input and on careful separation of sensitive audio traces from USB routing.
How do I request a quote and current lead time for AK5373EQ?
Use the Request a Quote form on this page to request the current commercial status, lead time, minimum order quantity, and any remaining-stock options for the AK5373EQ. Because the part is obsolete and its lifecycle status can change as inventory is depleted, request written confirmation before placing a production order. No fixed stock quantity should be inferred from a reseller inventory headline without current transactional confirmation.
How much does AK5373EQ cost and is it in stock?
The current commercial price and stock allocation for the AK5373EQ should be obtained through the Request a Quote form on this page. The device is identified as obsolete in a technical product listing, while reseller inventory may still exist in varying quantities. Request current unit pricing, quantity breaks, lot traceability, and lead time, and specify whether the requirement is sample quantity, maintenance stock, or a larger production allocation.
Can I buy an AK5373EQ online?
The AK5373EQ can be requested through the Request a Quote form on this page, which supports current sourcing of obsolete and remaining-stock semiconductors. Before ordering, ask for the manufacturer name, package condition, lot date, screening level, and a statement of whether the units are new, factory-sealed stock. The part is an obsolete 48-pin LQFP USB audio ADC, so traceability and long-term availability are more important than an unconfirmed inventory headline.
What are the principal design considerations for the AK5373EQ?
The principal considerations are analog-input conditioning, clock and USB implementation, supply decoupling, and mixed-signal PCB layout. Keep analog and digital grounds organized according to the manufacturer application circuit, place bypass components close to the supply pins, and route the USB differential pair as a controlled impedance pair away from microphone or line-input traces. Because the AK5373EQ is obsolete, preserve the original footprint and validate any replacement against the complete manufacturer pin list.
What is the package and operating temperature of AK5373EQ?
The AK5373EQ is packaged in a 48-pin LFQP/LQFP measuring 7 x 7 mm with a 0.50 mm lead pitch. Its specified operating-temperature range is -10°C to 70°C, and its screening level is commercial. These conditions make it suitable for indoor consumer and communication equipment. An industrial or automotive installation that operates outside the stated range should use a suitably qualified converter instead of assuming that the AK5373EQ can withstand those conditions.
Does the AK5373EQ need a separate USB interface controller?
The AK5373EQ integrates a USB serial interface engine, USB transceiver, and audio-class processing, so a simple USB audio peripheral may not require a separate USB interface controller. Integration does not remove all host-interface design work: the implementation still needs correct USB data routing, power, enumeration support, firmware or class compatibility, and compliance with the USB 2.0 behavior defined by AKM. Use the manufacturer reference circuit as the basis for the PCB and firmware.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা AK5373EQ — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose the AK5373EQ for maintenance of an established USB audio design that specifically uses its 24-bit, 48 kHz stereo conversion, integrated USB 2.0 interface, and 48-pin LQFP footprint. It is particularly useful when the original PCB, firmware, and USB enumeration behavior must be preserved. Consider AK5371AVQ only after checking its pin assignments, voltage range, power consumption, package dimensions, clock requirements, and USB behavior against the original design. For a new platform, evaluate current USB audio converters instead of committing to an obsolete part. Neither device should be selected solely from resolution and package size; host class support, analog performance, clocking, supply sequencing, and long-term availability are decisive. If the AK5373EQ footprint is retained, obtain a manufacturer or qualified-channel pin-to-pin comparison before approving any substitution.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য AK5371AVQ
Package 48-LQFP (7 x 7 mm) 48-LQFP (7 x 7 mm)
Brand AKM Semiconductor AKM Semiconductor

মূল পার্থক্যসমূহ

  • Integrated USB audio interface (বনামAK5371AVQ)
  • Defined stereo capture format (বনামAK5371AVQ)
  • Compact surface-mount integration (বনামAK5371AVQ)

ডিজাইন নোট

Treat the analog inputs, USB differential pair, and clock circuitry as separate high-priority layout zones. Route the USB pair as a controlled-impedance differential pair over a continuous reference plane and keep it away from microphone or line-input traces. Place input protection and filtering components close to the corresponding pins, while using the manufacturer reference layout to establish ground partitioning and return paths without introducing excessive loop area.

Use a supply that remains within the specified 3 V to 3.6 V range during startup, USB bus-power changes, and maximum processing load. Place the required input and bypass capacitors close to the associated supply pins and minimize loop area between each capacitor and the device. Confirm ground-reference arrangements for analog and digital sections with the AKM application circuit before adding extra filtering that could interfere with USB or clock behavior.

Do not treat a matching package count or a general specification comparison as proof of drop-in compatibility. Before substituting AK5371AVQ or another converter, compare every pin, analog input range, clock source, supply sequence, USB transceiver connection, enumeration behavior, and exposed thermal or ground connection. This is especially important for an obsolete USB audio design because a small interface or pin-function difference can prevent enumeration or corrupt clocking despite otherwise similar headline specifications.

Provide a clean clock and observe the source impedance of each analog input. The 24-bit converter rating does not guarantee 24-bit usable performance by itself; front-end gain, source impedance, grounding, clock jitter, PCB leakage, and EMI determine the practical noise floor. Keep external input networks balanced in impedance and use the manufacturer-recommended values so the stereo channels retain matching gain, phase, and bandwidth.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Yes
কনফ্লিক্ট মিনারেলস
Unknown

The package is identified as halogen-free plastic. RoHS, REACH, lead-free, and conflict-minerals declarations are unknown.

ডেটা যাচাই করা হয়েছে: 2026-11-11 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

AK5373EQ datasheet AK5373EQ pinout AK5373EQ datasheet pdf AK5373EQ specifications AK5373EQ 24 bit 48 kHz AK5373EQ 48-LQFP pinout AK5373EQ USB 2.0 ADC AK5373EQ equivalent AK5373EQ replacement AK5373EQ vs AK5371AVQ AK5373EQ price AK5373EQ stock AKM Semiconductor AK5373EQ AK5373EQ USB audio application circuit

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

AKM Semiconductor AK5373EQ AK5371AVQ stereo ADC analog-to-digital converter audio ADC USB 2.0 USB serial interface engine USB transceiver audio-class processing 24-bit resolution 48 kHz sampling rate 3 V to 3.6 V supply 48-LQFP LFQP 7 x 7 mm package 0.50 mm lead pitch surface mount halogen free USB microphone digital audio recorder USB audio adapter commercial screening level mixed-signal PCB layout
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন