Microchip Technology

ATSAMD20G16B-MN - 48MHz Cortex-M0+ MCU | Microchip

MPN: ATSAMD20G16B-MN ✓ সক্রিয়
1.6 V to 3.6 V Vdss 48-QFN, 7 mm × 7 mm Package 48 MHz Speed 64 KB (64K × 8 bits) Memory
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

ATSAMD20G16B-MN সারাংশ

The Microchip Technology ATSAMD20G16B-MN is a 32-bit ARM Cortex-M0+ flash microcontroller operating up to 48 MHz, with 64 KB of program flash and 8 KB of SRAM, housed in a 48-QFN 7 mm × 7 mm package with an exposed pad. It supports a 1.6 V to 3.6 V operating range and is specified for industrial-grade operation up to 105°C.

An ARM Cortex-M0+ microcontroller is a compact embedded-processing device designed around a low-power 32-bit architecture. Within the semiconductor hierarchy, it belongs to the microcontroller class and combines a CPU core, embedded flash, SRAM, peripherals, and serial interfaces on one integrated circuit. The SAM D20G family targets cost-sensitive home automation, consumer, metering, and industrial control products where efficient local processing and flexible embedded memory are valuable.

Key device characteristics include 48 MHz maximum operating frequency, 64 KB flash organized as 64K × 8 bits, and 8 KB SRAM. The 1.6 V to 3.6 V supply range accommodates common low-voltage embedded systems, while the green 48-QFN package supports compact surface-mount layouts. The exposed thermal pad provides an electrical and thermal connection beneath the package when the PCB design permits it.

The ATSAMD20G16B-MN combines an ARM Cortex-M0+ processor with embedded memory and communication peripherals in a single low-power device. Its 32-bit architecture supports efficient control tasks, serial data handling, and basic signal processing without requiring a separate processor and external memory. The industrial temperature designation supports deployments where ambient conditions exceed ordinary commercial consumer environments, subject to correct power, clock, and thermal implementation.

Typical applications include connected home-automation controllers, utility metering equipment, industrial sensing nodes, consumer accessory controllers, low-power embedded gateways, and compact control boards. The 48 MHz Cortex-M0+ core provides useful processing headroom for protocol handling and real-time control, while 64 KB flash and 8 KB SRAM support embedded firmware, configuration data, and moderate working-memory requirements.

Designers should follow the manufacturer pin-description table when assigning tracks and the exposed-pad land pattern, and should verify operating-voltage requirements against all peripheral and I/O constraints. Place decoupling capacitors close to the supply pins, connect the exposed pad according to the package guidance, and validate clock and debug programming arrangements before production release.

This product page combines the core electrical identity, practical design guidance, sourcing information, and a conservative drop-in comparison for the ATSAMD20G16B-MN. It is intended to help engineers distinguish true package-compatible alternatives from devices that are only functionally similar.

এর জন্য ড্রপ-ইন বিকল্প ATSAMD20G16B-MN — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible ATSAMD20G16B-MN (একই form factor এবং footprint) — পার্থক্য রয়েছে Package, Debug Interface, Mounting Type, ADC, Core Architecture.

Microchip Technology
Package: 48-QFN (7x7 mm)
Debug Interface: Serial Wire Debug (SWD)
Mounting Type: Surface Mount
এর সাথে তুলনা করুন ATSAMD20G16B-MN →
Microchip Technology
Package: 48-QFN (7x7 mm)
Debug Interface: 2-pin Serial Wire Debug (SWD)
Mounting Type: Surface Mount
এর সাথে তুলনা করুন ATSAMD20G16B-MN →
Microchip Technology
Package: 48-pin QFN (7x7 mm) with exposed pad
Debug Interface: Serial Wire Debug (SWD), Micro Trace Buffer
Mounting Type: Surface Mount
এর সাথে তুলনা করুন ATSAMD20G16B-MN →

ATSAMD20G16A-MNT

✅ ড্রপ-ইন
Microchip Technology
📦 48-QFN (7x7) exposed pad
ARM Cortex-M0+ · 32-bit · 48 MHz · 64 KB · 8 KB · 14-channel 12-bit · 1-channel 10-bit · 1.6 V to 3.6 V

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

ATSAMD21G16B-MFT

✅ ড্রপ-ইন
Microchip Technology
📦 48-QFN exposed pad
ARM Cortex-M0+ (32-bit) · 48 MHz · 2.46 CoreMark/MHz · 64 KB (in-system self-programmable) · 8 KB · 1.62 V to 3.63 V · -40 C to +125 C (industrial) · 48-QFN (7x7 mm)

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

ATSAMD21G16B-MUT

✅ ড্রপ-ইন
Microchip Technology
📦 48-QFN exposed pad
ARM Cortex-M0+ (32-bit) · SAM D21G · B (second-generation) · 48 MHz · 2.46 CoreMark/MHz · 64 KB (64K x 8) · 8 KB · 1.62 V to 3.63 V

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

ATSAMD21G16B-MUT

✅ ড্রপ-ইন
Microchip Technology
📦 48-QFN exposed pad
ARM Cortex-M0+ (32-bit) · SAM D21G · B (second-generation) · 48 MHz · 2.46 CoreMark/MHz · 64 KB (64K x 8) · 8 KB · 1.62 V to 3.63 V

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

ATSAMD20G16B-MN সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

CPU Core Single-core ARM Cortex-M0+
Architecture 32-bit RISC
Maximum CPU Frequency 48 MHz
Program Flash Memory 64 KB (64K × 8 bits)
SRAM 8 KB
অপারেটিং সাপ্লাই ভোল্টেজ 1.6 V to 3.6 V
প্যাকেজ 48-QFN, 7 mm × 7 mm
Package Construction 48-QFN with exposed pad
Terminal Count 48 terminals
Temperature Grade Industrial, up to 105°C
মাউন্টিং টাইপ Surface-mount no-lead package
Shipping Format Tray
Green Compliance Green
Product Family SAM D20G
Product Type ARM flash microcontroller
Typical Application Home automation, consumer, metering, and industrial control

ATSAMD20G16B-MN 48-qfn with exposed pad পিন কনফিগারেশন গাইড

ATSAMD20G16B-MN (48-qfn with exposed pad প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।

ATSAMD20G16B-MN-এর জন্য 48-qfn with exposed pad প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি ATSAMD20G16B-MN.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

ATSAMD20G16B-MN এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Home Automation Controller, Utility Metering Controller, Industrial Sensor Node, Consumer Device Controller, Embedded Communication Gateway, Compact Data Acquisition Module.

🧩

Home Automation Controller

The ATSAMD20G16B-MN fits a low-power home-automation controller because its 48 MHz ARM Cortex-M0+ core can handle protocol management, user commands, and local control logic while consuming little board area. The 64 KB flash provides room for embedded application code and configuration, while 8 KB SRAM supports working state and serial buffering. Operating from 1.6 V to 3.6 V allows integration with common 1.8 V, 2.5 V, or 3.3 V system rails. The compact 48-QFN footprint supports dense control modules. Designers should use the manufacturer pin table to assign communication interfaces and preserve the exposed-pad connection.

🏭

Utility Metering Controller

The ATSAMD20G16B-MN is suitable for metering equipment that must acquire measurements, maintain operating state, and communicate results through embedded serial interfaces. Its 48 MHz Cortex-M0+ core provides real-time processing capacity, while 64 KB flash accommodates metering firmware and calibration parameters. The 8 KB SRAM is suitable for buffers and intermediate processing within appropriately designed software. A 1.6 V to 3.6 V operating range simplifies integration with low-energy sensing and communication circuitry. The industrial temperature rating to 105°C supports controlled metering environments, provided the complete assembly remains within its thermal and EMC qualification limits.

🏭

Industrial Sensor Node

The ATSAMD20G16B-MN can act as the control processor in a compact industrial sensor node that samples inputs, applies local filtering, manages alarms, and forwards data over a serial link. Its 48 MHz ARM Cortex-M0+ core handles protocol and control tasks without a separate processor, while 64 KB flash and 8 KB SRAM divide embedded code and working memory clearly. The 1.6 V to 3.6 V supply range supports low-voltage sensor architectures, and the 48-QFN package preserves board area in densely populated equipment. Layout should minimize analog and digital coupling, and production firmware should include brownout and communications recovery behavior.

📱

Consumer Device Controller

The ATSAMD20G16B-MN provides enough processing and memory for compact consumer controllers that coordinate buttons, indicators, sensors, and serial accessories. The 48 MHz Cortex-M0+ core executes firmware promptly, and the 64 KB flash stores application code without requiring an external memory device for moderate feature sets. Its 8 KB SRAM supports protocol state, display updates, and short data buffers. The 1.6 V to 3.6 V operating range supports common low-voltage product architectures, while the small 48-QFN package improves board density. Firmware design should include safe peripheral defaults and recovery paths for power, communications, and configuration updates.

🌐

Embedded Communication Gateway

The ATSAMD20G16B-MN is appropriate for a small serial gateway that translates messages, manages local endpoints, and maintains a configurable protocol stack. Its 48 MHz Cortex-M0+ processor offers enough performance for efficient character handling and event-driven control, while 64 KB flash can hold the gateway application and communication routines. The 8 KB SRAM can support packet assembly and interface state for appropriately bounded traffic. Operating at 1.6 V through 3.6 V permits integration with low-voltage radio and transceiver modules. Keep switching or high-current interfaces physically separated from sensitive routing, and validate protocol timing under maximum buffered-message loads.

📊

Compact Data Acquisition Module

The ATSAMD20G16B-MN can coordinate a small data-acquisition module that converts external analog signals into digital measurements, performs local processing, and transfers results. Its 48 MHz Cortex-M0+ core handles sampling control and communications, while 64 KB flash and 8 KB SRAM support firmware, calibration values, and short acquisition buffers. The 1.6 V to 3.6 V range allows a shared supply architecture with compatible low-voltage converters and sensors. The 48-QFN exposed-pad package supports compact placement but requires careful via and copper-pad design for stable operation. Establish an analog ground strategy and decouple each supply domain directly at the relevant device pins.

What is the ATSAMD20G16B-MN?
The ATSAMD20G16B-MN is a 32-bit ARM Cortex-M0+ flash microcontroller from Microchip Technology. It operates up to 48 MHz and provides 64 KB of flash plus 8 KB of SRAM in a 48-QFN 7 mm × 7 mm package. According to the Microchip product page, the SAM D20G family is intended for home automation, consumer, metering, and industrial applications.
What are the key specifications of ATSAMD20G16B-MN that engineers should know?
The ATSAMD20G16B-MN combines a 32-bit ARM Cortex-M0+ core, 48 MHz maximum clock, 64 KB flash, 8 KB SRAM, and a 1.6 V to 3.6 V supply range. It is packaged as a 48-QFN measuring 7 mm × 7 mm with an exposed pad and is identified as an industrial-grade, green device rated to 105°C.
What is the operating voltage of ATSAMD20G16B-MN?
The ATSAMD20G16B-MN operates from 1.6 V to 3.6 V. This range supports low-voltage embedded designs operating from 1.8 V, 2.5 V, or 3.3 V rails. The manufacturer listing also identifies the device as a green SAM D20G Cortex-M0+ microcontroller with a maximum operating frequency of 48 MHz.
Where can I download the ATSAMD20G16B-MN datasheet PDF?
The manufacturer product page for ATSAMD20G16 is the primary location for technical documentation and downloadable supporting material. Use the Microchip product page linked on this page to obtain the current datasheet, package information, and associated documents. The exact document revision and page count should be confirmed in the file opened from the manufacturer site.
Where is the ATSAMD20G16B-MN pinout?
The ATSAMD20G16B-MN pinout is documented in the manufacturer package drawing and pin-description table for the 48-QFN package. Use those documents when assigning power, ground, peripheral, programming, and exposed-pad connections. The ATSAMD20G16B-MN uses a 48-terminal no-lead package, so exposed-pad and thermal-pad details must be included in the footprint design.
What memory resources are available on ATSAMD20G16B-MN?
The ATSAMD20G16B-MN includes 64 KB of flash memory organized as 64K × 8 bits and 8 KB of SRAM. According to the Microchip ATSAMD20G16 product description, these resources support embedded firmware and data handling in low-power consumer, metering, automation, and industrial-control designs.
Is ATSAMD20G16B-MN suitable for industrial control applications?
The ATSAMD20G16B-MN is suitable for industrial control designs that operate within its specified electrical limits. It uses a 1.6 V to 3.6 V supply range and is identified as an industrial-grade device with a maximum temperature rating of 105°C. Final suitability still depends on enclosure temperature, power quality, electromagnetic conditions, and system qualification.
ATSAMD20G16B-MN vs ATSAMD20G16A-MN: which should be selected?
ATSAMD20G16B-MN is the B-revision device, while ATSAMD20G16A-MN is the earlier A-revision offering. Both are identified as 48 MHz SAM D20G Cortex-M0+ microcontrollers with 64 KB flash, but the B revision should be preferred for new production designs unless an existing qualified design specifically requires the A revision. Confirm firmware and errata compatibility before changing revisions.
Can ATSAMD21G16B-MFT replace ATSAMD20G16B-MN?
The ATSAMD21G16B-MFT is a 48-QFN, 48 MHz, 64 KB-flash SAM D21G microcontroller that may serve as a design-review alternative. A replacement should not be treated as a drop-in without checking the pin table, exposed-pad layout, power pins, peripheral assignments, startup behavior, and firmware dependencies against the ATSAMD20G16B-MN documentation.
When should I choose ATSAMD20G16B-MN over an ATSAMD21G16B option?
Choose the ATSAMD20G16B-MN when the design is based on the SAM D20G family and requires its established peripheral arrangement, firmware support, or qualification history. Consider an ATSAMD21G16B option when its additional capabilities provide a measured benefit and the package, pin assignments, power architecture, and software migration have been fully validated.
What is the best drop-in replacement for ATSAMD20G16B-MN?
The closest documented same-brand candidates are the ATSAMD20G16A-MN and the 48-QFN ATSAMD21G16B variants, but no universal drop-in replacement can be confirmed from the available cross-reference records. Validate every pin, peripheral, voltage, and exposed-pad connection before substitution; firmware changes may also be required when moving between SAM D20G and SAM D21G devices.
Is ATSAMD20G16B-MN the same as ATSAMD20G16B-MNT?
No. ATSAMD20G16B-MN and ATSAMD20G16B-MNT identify different orderable configurations of the B-revision device, with the packaging suffix distinguishing the supplied form. The ATSAMD20G16B-MN listing specifies tray format, while ATSAMD20G16B-MNT is listed as the tape-and-reel variant. Verify the required assembly format before placing an order.
Where to buy ATSAMD20G16B-MN online?
Use the Request a Quote form on this page to request ATSAMD20G16B-MN availability, volume pricing, and current lead time. The request should identify the exact 48-QFN tray configuration and quantity required. Stock and delivery schedules can change, so confirm the order details directly rather than relying on an older listing.
What is the price of ATSAMD20G16B-MN?
Current ATSAMD20G16B-MN pricing is best requested through the Request a Quote form on this page. Submit the required quantity and packaging configuration, and the quote request will provide the applicable commercial terms. The structured listing data supports exact-MPN sourcing without exposing a potentially stale unit price in published copy.
What is the lead time for ATSAMD20G16B-MN?
Request the current ATSAMD20G16B-MN lead time through the Request a Quote form on this page. Include the annual demand, forecast horizon, and required package format so the supplier can confirm the appropriate schedule. One distributor listing described its delivery interval as to be confirmed, making a fresh quotation the appropriate procurement step.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা ATSAMD20G16B-MN — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose the ATSAMD20G16B-MN when building a compact SAM D20G design that benefits from a 48 MHz ARM Cortex-M0+ core, 64 KB flash, 8 KB SRAM, and operation from 1.6 V to 3.6 V. It is especially suitable when current firmware, peripheral assignments, or qualification work already targets the B revision. The ATSAMD20G16A-MN is a credible same-family alternative when an established A-revision platform is required, but revision notices and errata must be reviewed. Consider an ATSAMD21G16B option when its additional capabilities justify a family migration; although it also offers 48 MHz operation and 64 KB flash in a comparable 48-QFN package, peripheral, pin-function, startup, and firmware differences still require verification. No cross-brand drop-in alternatives were established, so an MCU substitution should not proceed on package and headline-frequency similarity alone.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য ATSAMD20G16A-MN ATSAMD21G16B-MFT ATSAMD21G16B-MUT ATSAMD21G16B-MU
Package 48-QFN (7x7) exposed pad 48-QFN exposed pad 48-QFN exposed pad 48-QFN exposed pad 48-QFN exposed pad
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
CPU Core ARM Cortex-M0+ ARM Cortex-M0+ ARM Cortex-M0+ ARM Cortex-M0+ ARM Cortex-M0+
Maximum Frequency 48 MHz 48 MHz 48 MHz 48 MHz 48 MHz
Flash Memory 64 KB 64 KB 64 KB 64 KB 64 KB
Operating Supply Voltage 1.6 V to 3.6 V 1.8 V, 2.5 V, or 3.3 V 3.3 V 3.3 V 3.3 V
Product Family SAM D20G SAM D20G SAM D21G SAM D21G SAM D21G
Device Revision B revision A revision B revision B revision B revision
Terminal Count 48 terminals 48 terminals 48 terminals 48 terminals 48 terminals
Shipping Format Tray Tray Tape and reel Tape and reel Tape and reel

মূল পার্থক্যসমূহ

  • Newer device revision within the same SAM D20G architecture (বনামATSAMD20G16A-MN)
  • Broader documented supply-voltage range (বনামATSAMD21G16B-MFT)
  • Established target-family software continuity (বনামATSAMD21G16B-MU)

ডিজাইন নোট

Use the manufacturer 48-QFN land pattern and exposed-pad geometry without substituting a generic 48-pin footprint. Place the MCU close to its bypass capacitors and route the exposed pad with an appropriate via array and copper treatment for electrical and thermal performance. Confirm pad dimensions, solder-mask clearance, paste volume, and assembly reflow requirements against the current package drawing.

Keep supply and ground connections short, and place the required decoupling capacitors directly between the appropriate supply pins and ground pins. Separate sensitive analog routing from switching nodes and high-current return paths. Verify brownout behavior, startup voltage, operating frequency, and I/O voltage limits under the lowest system-supply condition rather than relying only on the nominal 3.3 V rail.

Do not treat the ATSAMD20G16A-MN as an unconditional substitute for the B revision without reviewing the device revision notices and errata. Likewise, moving to an ATSAMD21G16B device can change peripheral availability, startup behavior, pin multiplexing, and firmware requirements even when the package and headline memory figures match. Validate programming, boot, debug, clock, and application peripherals on the intended assembly.

Preserve a quiet return path beneath and around the exposed pad, but observe the manufacturer rules for connecting it to ground or a thermal plane. Keep crystal, high-speed clock, programming, and communication routes away from noisy switching inductors and fast-edge power nodes. Use a defined test-point strategy for supply, reset, debug, and communication signals so production diagnostics remain accessible.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The product listings identify the device as green, but no explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was established. The 105°C industrial temperature classification is not equivalent to AEC-Q100 qualification.

ডেটা যাচাই করা হয়েছে: 2026-11-20 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

ATSAMD20G16B-MN datasheet ATSAMD20G16B-MN datasheet pdf ATSAMD20G16B-MN pinout ATSAMD20G16B-MN specifications ATSAMD20G16B-MN equivalent ATSAMD20G16B-MN replacement ATSAMD20G16B-MN cross reference ATSAMD20G16B-MN vs ATSAMD20G16A-MN ATSAMD20G16B-MN 48-QFN footprint ATSAMD20G16B-MN application circuit Microchip ATSAMD20G16B-MN ATSAMD20G16B-MN price ATSAMD20G16B-MN stock

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Microchip Technology ATSAMD20G16B-MN ATSAMD20G16 ATSAMD20G16A-MN ATSAMD21G16B-MFT ATSAMD21G16B-MUT ATSAMD21G16B-MU ARM Cortex-M0+ SAM D20G SAM D21G microcontroller embedded microcontroller flash microcontroller semiconductor 32-bit RISC 48 MHz 64 KB flash 8 KB SRAM 48-QFN VQFN family surface mount SMD package home automation industrial metering sensor node embedded gateway
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন