ATTINY85-20MU - 20MHz 8KB AVR MCU | Microchip Technology
MPN: ATTINY85-20MU ✓ সক্রিয়ATTINY85-20MU সারাংশ
An ATtiny microcontroller belongs to the AVR family of 8-bit embedded processors. These devices combine a compact RISC processor core, nonvolatile program and data memory, and integrated peripherals in a small surface-mount package. Within the broader semiconductor hierarchy, the ATTINY85-20MU is a microcontroller rather than a general-purpose analog or digital logic IC, making it suitable for compact control systems requiring embedded code execution, sensor measurement, and programmable I/O.
Key features include a maximum clock frequency of 20 MHz, an 8 KB in-system programmable flash memory, 512 bytes of EEPROM, 512 bytes of SRAM, a 5 V ADC, and operation from a 3.3 V to 5 V supply. Its 8 KB flash capacity provides substantially more program space than the smallest ATtiny devices, while the compact 20-pin QFN-EP package supports space-constrained embedded products.
The ATTINY85-20MU combines two 8-bit timers, a 4-channel 10-bit ADC, USART, SPI, and TWI communication interfaces. These resources allow one controller to manage time-critical switching, analog sensing, and serial communications without requiring a larger system controller. The exposed pad provides a thermal and ground connection beneath the QFN body and must be connected according to the manufacturer's land-pattern requirements.
Typical applications include compact industrial controls, sensor nodes, lighting controllers, battery-powered accessories, wearable electronics, and small automation products. The 20 MHz operating limit also makes it appropriate for communication, timing, and control tasks that need more processing headroom than low-speed 8-bit designs.
PCB implementation should follow the manufacturer's QFN land pattern and maintain the exposed-pad connection to ground. Confirm the programmed clock divider and fuse settings before changing the operating frequency, and validate signal routing and thermal performance across the full intended temperature range.
This page combines the verified device characteristics with practical implementation guidance, package constraints, application analysis, and structured replacement considerations. It highlights where the 20 MHz clock, 8 KB flash, 512-byte EEPROM, and 512-byte SRAM determine whether the ATTINY85-20MU is suitable for a compact embedded design.
এর জন্য ড্রপ-ইন বিকল্প ATTINY85-20MU — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই সিরিজের ভ্যারিয়েন্ট
একই সিরিজের মডেল যেগুলো drop-in compatible ATTINY85-20MU (একই form factor এবং footprint) — পার্থক্য রয়েছে Architecture, Flash Memory, Package, Program Memory Type, SRAM.
এই পণ্যের জন্য কোনো ড্রপ-ইন বিকল্প পাওয়া যায়নি।
বিকল্প অনুরোধ করুনATTINY85-20MU সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Processor Family | AVR ATtiny 8-bit microcontroller |
| সর্বোচ্চ ক্লক ফ্রিকোয়েন্সি | 20 MHz |
| Flash Memory | 8 KB (4K x 16 words) |
| EEPROM | 512 bytes |
| SRAM | 512 bytes |
| ADC Resolution | 10 bits |
| ADC Supply Reference | 5 V |
| সাপ্লাই ভোল্টেজ | 3.3 V to 5 V |
| Timer Count | 2 |
| ADC Channel Count | 4 |
| প্যাকেজ | 20-pin QFN with exposed pad (4 x 4 mm) |
| মাউন্টিং টাইপ | Surface mount |
| Program Memory Type | 8 KB in-system programmable flash |
| Architecture | 8-bit AVR RISC |
| Communication Interfaces | USART, SPI, and TWI |
ATTINY85-20MU 20-pin qfn with exposed pad (4 x 4 mm) পিন কনফিগারেশন গাইড
ATTINY85-20MU (20-pin qfn with exposed pad (4 x 4 mm) প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি ATTINY85-20MU.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
ATTINY85-20MU এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Compact Industrial Sensor Nodes, LED Lighting and Dimming Controls, Battery-Powered Accessories, SPI and TWI Sensor Interfaces, Small Automation and Timer Controllers, USBasp and Compact Programmer Accessories.
Compact Industrial Sensor Nodes
The ATTINY85-20MU fits compact industrial sensor nodes because it combines a 20 MHz AVR core, 8 KB of flash, 512 bytes of SRAM, and a four-channel 10-bit ADC in a 4 x 4 mm QFN-EP package. The controller can sample analog sensors, apply filtering and threshold logic, and manage local actuator outputs within one compact device. Its USART, SPI, and TWI interfaces allow a node to communicate with a remote transceiver, local memory, or industrial sensor hub. Because SRAM is limited to 512 bytes, firmware should use efficient buffering and avoid storing large sample batches in RAM. The 3.3 V to 5 V operating range also supports both common industrial logic levels, subject to the electrical limits of the connected peripheral.
সুপারিশকৃত
LED Lighting and Dimming Controls
The ATTINY85-20MU is well suited to LED lighting and dimming control because two timers can generate precision PWM outputs while the 20 MHz clock provides timing headroom for animation, current feedback, and communication tasks. The 8 KB flash capacity can hold application logic, while the 512-byte SRAM accommodates short control loops and small communication buffers. Its 4 x 4 mm QFN-EP footprint allows the controller to fit beside an LED driver and power components on a compact board. The four ADC channels can support light-level measurement or current sensing, although channel selection must avoid functions assigned to the same multiplexed pins. Firmware should include safe restart behavior and configurable ramp limits so lighting changes remain controlled during startup or fault recovery.
সুপারিশকৃত
Battery-Powered Accessories
The ATTINY85-20MU can serve as the central controller in a battery-powered wearable or portable accessory when its 8 KB flash, 512-byte SRAM, and compact package meet the application requirements. The device provides USART, SPI, and TWI interfaces for connecting a sensor, display driver, or wireless module, while two timers can organize periodic sampling and low-power background tasks. Its 3.3 V to 5 V operating range supports both 3.3 V and 5 V portable architectures. Power consumption depends on the selected clock, active versus sleep behavior, and peripheral activity, so the final battery budget must be measured in the operating state that matters. The QFN-EP footprint also reduces board area compared with a larger leaded controller, enabling a compact accessory design.
সুপারিশকৃত
SPI and TWI Sensor Interfaces
The ATTINY85-20MU is appropriate for small sensor assemblies requiring serial connectivity without the memory overhead of a larger MCU. Its SPI interface can operate with high-speed serial sensors and displays, while TWI supports devices using the two-wire bus. The 20 MHz maximum clock supports faster serial transactions and more responsive control loops than low-speed 8-bit configurations, while 8 KB of flash leaves room for drivers and application code. The exposed-pad QFN package requires careful layout to preserve signal integrity and thermal performance, especially when SPI clock rates are high. Firmware should expose clear bus-error recovery paths, and the board design should provide appropriate pull-ups for TWI and impedance-controlled routing for SPI signals.
সুপারিশকৃত
Small Automation and Timer Controllers
The ATTINY85-20MU is effective in small automation modules that coordinate timed outputs, analog thresholds, and serial commands. Two hardware timers support repetitive timing and PWM generation, while the 8-bit AVR architecture executes compact control logic without requiring an external programmable logic device. The 512-byte EEPROM can retain settings across power cycles, although write endurance and update frequency should be considered for frequently changing parameters. The 4-channel ADC supports feedback from temperature, pressure, or potentiometer inputs, and USART provides a straightforward service or configuration interface. For motor or high-current actuator outputs, the controller should drive suitable external driver circuitry rather than connect loads directly. Firmware must include defined safe states for invalid sensor readings and communication loss.
সুপারিশকৃত
USBasp and Compact Programmer Accessories
The ATTINY85-20MU can be used in compact programming accessories based on the AVR family, including firmware-assisted USB interface and diagnostic designs. Its 8 KB flash and 512-byte SRAM are adequate for small utilities that communicate with a host, verify targets, or provide configuration services, while SPI and TWI permit connections to programming adapters and target devices. The compact 4 x 4 mm QFN-EP package supports space-efficient accessory designs, but a 20-pin package provides fewer pins than a larger controller and requires careful peripheral multiplexing. Firmware should reserve enough flash for USB descriptors and boot logic, and it should not place time-critical USB servicing in blocking loops. A production programmer still requires a dedicated host interface and appropriate target-voltage sensing rather than relying solely on this microcontroller.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা ATTINY85-20MU — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য |
|---|---|
| Brand | Microchip Technology |
| Package | 20-pin QFN-EP (4 x 4 mm) |
| Processor Architecture | 8-bit AVR RISC |
| Maximum Clock Frequency | 20 MHz |
| Flash Memory | 8 KB (4K x 16 words) |
| EEPROM | 512 bytes |
| SRAM | 512 bytes |
| ADC | 4-channel, 10-bit, 5 V reference |
| Supply Voltage | 3.3 V to 5 V |
| Timers | 2 |
মূল পার্থক্যসমূহ
- Higher clock and memory combination within the ATtiny family (বনামATTINY44A-MUR)
- Compact 4 x 4 mm QFN implementation (বনামATMEGA329A-MU)
- Integrated communication and analog conversion resources (বনামATTINY13A-MU)
ডিজাইন নোট
Use the manufacturer QFN land pattern and preserve the exposed-pad connection beneath the ATTINY85-20MU. The 4 x 4 mm package has closely spaced perimeter pads, so place the device before routing fine-pitch signals and use a consistent fanout for power, ground, and communication nets. Avoid placing test-probe access on exposed copper where the probe can contact the ground pad and create an unintended short.
Plan the 3.3 V to 5 V supply path around the ATTINY85-20MU's operating range rather than assuming both limits are equally suitable for every peripheral. Place local bypass capacitance at the supply pins according to the manufacturer's application guidance, and route the exposed pad as a low-impedance ground connection. Validate startup behavior and supply droop while ADC conversion, timers, and serial interfaces operate concurrently.
Do not exceed the 512-byte SRAM limit or assume that 8 KB of flash is available for all application code. Interrupt handlers and communication buffers can consume SRAM rapidly, so measure worst-case stack depth with interrupts enabled. Also confirm clock-divider and fuse settings before expecting 20 MHz operation; incorrect fuse configuration can make the device run below its rated frequency.
Assign ADC, USART, SPI, TWI, and timer functions early because the 20-pin package provides fewer external resources than larger controllers. Keep analog inputs away from fast switching and communication routes, maintain short ground returns, and use a quiet reference arrangement when measuring low-level signals. Review pin multiplexing against the selected timer and communication channels before releasing the PCB layout.
কমপ্লায়েন্স তথ্য
The verified listings identify the device as a Microchip ATtiny microcontroller but do not state the requested compliance certifications. A listing describes the ATTINY85 family as Functional Safety (FuSa), but no specific AEC-Q100 qualification is established for this MPN.