Microchip Technology

ATXMEGA16A4U-AN 32MHz AVR XMEGA MCU | Microchip Technology

MPN: ATXMEGA16A4U-AN ✓ সক্রিয়
1.6 V to 3.6 V Vdss 44-pin TQFP, 10 mm x 10 mm Package 32 MHz Speed 16 KB (8K x 16) Memory
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

ATXMEGA16A4U-AN সারাংশ

The Microchip Technology ATXMEGA16A4U-AN is an 8/16-bit AVR XMEGA microcontroller operating up to 32 MHz with up to 32 MIPS performance, 16 KB of self-programming Flash memory, and a 44-pin TQFP package measuring 10 mm by 10 mm. It also provides 2 KB of SRAM, 1 KB of EEPROM, 34 general-purpose I/O lines, and a 1.6 V to 3.6 V operating-voltage range.

An AVR XMEGA microcontroller is a low-power embedded-control semiconductor that combines an AVR RISC processor core, program and data memories, peripheral timers, communications interfaces, analog converters, and event-driven peripherals. Within the device hierarchy, it is an 8/16-bit microcontroller, a type of embedded processor and system-on-chip designed for compact industrial, consumer, communications, and control applications.

Key features include 16 KB of Flash program memory with read-while-write operation, a 4 KB boot-code section, 2 KB of SRAM, and 1 KB of EEPROM. The peripheral set includes a four-channel DMA controller, an eight-channel event system, a 16-bit real-time counter, five flexible 16-bit timer/counters, and five USARTs. These resources allow firmware to transfer data and trigger peripheral actions without relying on extensive CPU polling.

The ATXMEGA16A4U architecture supports up to 32 MIPS at a 32 MHz clock and provides an external bus interface alongside programmable interrupt handling. The 34 I/O pins give a design maker access to digital inputs, outputs, and multiplexed peripheral functions. Its combination of event-system routing, DMA, timers, and serial interfaces is especially useful when multiple timing-sensitive tasks must operate predictably within a compact embedded-control design.

Typical applications include industrial sensor controllers, serial gateways, motor and motion-control equipment, instrumentation, low-power data acquisition, and embedded communications equipment. The TQFP-44 package also makes the device practical for designs requiring a conventional surface-mount footprint rather than a very small leadless package.

Designers should preserve adequate decoupling at the supply pins, route sensitive analog inputs away from fast-switching nodes, and confirm pin assignments and peripheral multiplexing in the manufacturer pin-description table. Because the A4U and non-U A4 families differ in integrated peripherals, replacing the non-U device with ATXMEGA16A4U-AN can require firmware and board-level review rather than only a component substitution.

This product page combines manufacturer specifications, drop-in replacement analysis, package details, and practical design guidance to support component selection, schematic review, PCB planning, and firmware migration for the ATXMEGA16A4U-AN.

এর জন্য ড্রপ-ইন বিকল্প ATXMEGA16A4U-AN — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible ATXMEGA16A4U-AN (একই form factor এবং footprint) — পার্থক্য রয়েছে DMA Channels, Event System Channels, Package, RoHS Status, SRAM.

Microchip Technology
DMA Channels: 4
Event System Channels: 8
Package: 44-pin TQFP (10x10 mm)
এর সাথে তুলনা করুন ATXMEGA16A4U-AN →
Microchip Technology
DMA Channels: 4
Event System Channels: 8
RoHS Status: unknown
এর সাথে তুলনা করুন ATXMEGA16A4U-AN →

ATXMEGA16A4U-AU

✅ ড্রপ-ইন
Microchip Technology
📦 44-pin TQFP, 10 mm x 10 mm
AVR enhanced RISC (8/16-bit) · AVR XMEGA A4U · 32 MHz (32 MIPS) · 16 KB (8K x 16) · 4 KB · 2 KB · 1 KB · 1.6 V to 3.6 V

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

ATXMEGA32A4U-AU

✅ ড্রপ-ইন
Microchip Technology
📦 44-pin TQFP, 10 mm x 10 mm
8/16-bit RISC Flash Microcontroller · AVR enhanced RISC · 32 MHz · 32 KB Flash (16K x 16) · 4 KB Flash · 4 KB · 1 KB · 34

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

ATXMEGA16A4U-AN সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Product Type 8/16-bit AVR XMEGA microcontroller
সর্বোচ্চ ক্লক ফ্রিকোয়েন্সি 32 MHz
Maximum Throughput 32 MIPS
Flash Program Memory 16 KB (8K x 16)
Boot Loader Section 4 KB
SRAM 2 KB
EEPROM 1 KB
General-Purpose I/O Lines 34
Operating Voltage Range 1.6 V to 3.6 V
DMA Channels 4 channels
Event System Channels 8 channels
Timer/Counter Count 5
USART Count 5
Real-Time Counter 16-bit
প্যাকেজ 44-pin TQFP, 10 mm x 10 mm
Maximum Rated Temperature 105 °C
External Bus Interface Yes
RoHS স্ট্যাটাস Compliant

ATXMEGA16A4U-AN 44-pin tqfp, 10 mm x 10 mm পিন কনফিগারেশন গাইড

ATXMEGA16A4U-AN (44-pin tqfp, 10 mm x 10 mm প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।

ATXMEGA16A4U-AN-এর জন্য 44-pin tqfp, 10 mm x 10 mm প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি ATXMEGA16A4U-AN.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

ATXMEGA16A4U-AN এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Sensor Controller, Serial Communications Gateway, Motor and Motion Control, Low-Power Data Acquisition, Programmable Logic and Timing Control, Embedded Instrumentation.

🏭

Industrial Sensor Controller

The ATXMEGA16A4U-AN fits an industrial sensor controller because it combines 34 I/O lines, five 16-bit timer/counters, four DMA channels, and an eight-channel event system in a 44-pin TQFP package. The 16 KB Flash and 2 KB SRAM are sufficient for coordinated acquisition from multiple sensors when control code and communication buffers are kept compact. The event system can connect timer, DMA, and communication activity so that sampling occurs predictably without continuous CPU polling. Its 1.6 V to 3.6 V operating range supports 3.3 V process-control electronics, while the 105 °C maximum temperature designation allows use in warmer industrial enclosures when the full system remains within its thermal limits.

🌐

Serial Communications Gateway

The ATXMEGA16A4U-AN is appropriate for a multi-protocol serial gateway because it provides five USARTs together with an event system and DMA controller. Each USART can support a separate device connection or bridge, while DMA can move received and transmitted data without consuming a full CPU cycle for every byte. The controller's 16 KB self-programming Flash, 2 KB SRAM, and 1 KB EEPROM provide space for protocol conversion, configuration storage, and boot management. Running from 1.6 V to 3.6 V also allows integration with 3.3 V and selected 1.8 V interface levels, subject to the electrical limits of the individual peripheral and its external transceiver.

🔧

Motor and Motion Control

The ATXMEGA16A4U-AN supports compact motor and motion-control designs by combining five flexible 16-bit timer/counters with PWM-capable compare channels and 34 digital I/O lines. Those timer resources can generate deterministic timing references for motor-drive sequencing, capture input periods, or coordinate multiple control loops. The event system can route timer events directly to DMA channels and other peripherals, reducing processor intervention and improving timing consistency. Its compact 10 mm by 10 mm TQFP footprint simplifies routing compared with a larger leaded package, although exposed-pad, thermal, and decoupling recommendations must be followed exactly as specified in the manufacturer layout guidance.

🧩

Low-Power Data Acquisition

The ATXMEGA16A4U-AN is useful in low-power data-acquisition equipment where wake-up timing, local processing, and serial transfer must coexist within a 16 KB Flash budget. Its sleep and power-saving operating modes can reduce activity between measurement events, while the event system and DMA controller help move samples without continuous polling. Two kilobytes of SRAM provides working memory for short acquisition buffers, while the 1 KB EEPROM can retain calibration or configuration information. The 1.6 V to 3.6 V supply range supports low-voltage sensor systems, but the final power budget should combine processor current, analog-circuit load, communication activity, and regulator efficiency rather than relying only on active-current figures.

⚡

Programmable Logic and Timing Control

The ATXMEGA16A4U-AN can implement programmable timing and logic functions through its event system, five timer/counters, DMA channels, and programmable interrupt controller. Timer events may trigger data transfers or other peripheral actions with reduced software latency, making the controller useful for deterministic control rather than general-purpose workstation logic. Its 16-bit real-time counter provides a dedicated timekeeping resource, and the five USARTs allow local diagnostics or configuration channels. For designs that must keep timing behavior unchanged after replacement, compare clock calibration, fuse settings, peripheral multiplexing, and application firmware because a footprint-compatible component does not automatically guarantee identical real-time accuracy.

🔧

Embedded Instrumentation

The ATXMEGA16A4U-AN fits embedded instrumentation that needs local control, timed acquisition, status reporting, and field configuration within a compact board. The controller's five 16-bit timers support precise interval measurement, event counting, and periodic sampling, while five USARTs can connect measurement electronics, service ports, or external instruments. The 16 KB Flash and 2 KB SRAM are appropriate for focused embedded functions, with the boot-code section allowing protected initialization and recovery routines. At 1.6 V to 3.6 V operation, the device can support lower-voltage analog systems, although noise-sensitive measurements require careful grounding, analog-signal isolation, reference selection, and separate filtering away from digital switching activity.

What are the key specifications of ATXMEGA16A4U-AN that engineers should know?
The ATXMEGA16A4U-AN is a 32 MHz, 8/16-bit AVR XMEGA microcontroller with 16 KB Flash, 2 KB SRAM, 1 KB EEPROM, 34 I/O lines, and five USARTs. According to the manufacturer datasheet, it supports read-while-write Flash operation, four-channel DMA, an eight-channel event system, five 16-bit timer/counters, and a 16-bit real-time counter. The device operates from 1.6 V to 3.6 V and is supplied in a 44-pin, 10 mm by 10 mm TQFP package.
Where can I download the ATXMEGA16A4U-AN datasheet PDF?
The ATXMEGA16A4U-AN datasheet is available from Microchip Technology through the official AVR XMEGA A4 controller documentation. The manufacturer datasheet describes the 16 KB Flash memory, 2 KB SRAM, 1 KB EEPROM, clock system, peripherals, electrical characteristics, package options, and programming interfaces. Use the ATXMEGA16A4U and ATXMEGA16A4U-AN entries on the manufacturer product page to confirm the current device status, supported tools, and ordering information for the selected package suffix.
Where can I find the ATXMEGA16A4U pinout diagram?
The ATXMEGA16A4U pinout is found in the pin-description and package drawings within the manufacturer XMEGA A4 datasheet. The ATXMEGA16A4U-AN uses a 44-pin TQFP package, and its pin assignments include power, ground, reset, clock, programming interfaces, communications peripherals, analog functions, and general-purpose I/O. Verify the exact signal names against the datasheet before assigning PCB nets because several peripheral signals are multiplexed and alternate functions are selected through configuration registers.
What is the ATXMEGA16A4U-AN operating voltage range?
The ATXMEGA16A4U-AN operates from 1.6 V to 3.6 V. According to the Microchip Technology product listing and manufacturer controller documentation, the device supports a 32 MHz operating frequency and includes an internal oscillator and external clock options. A 3.3 V system can operate the controller directly from its nominal supply, while lower-voltage designs must check clock, analog-converter, and communication-interface limits in the electrical-characteristics section before selecting a 1.8 V operating point.
How much memory does the ATXMEGA16A4U-AN have?
The ATXMEGA16A4U-AN provides 16 KB of self-programming Flash, a separate 4 KB boot-code section, 2 KB of SRAM, and 1 KB of EEPROM. The manufacturer datasheet identifies the program memory as 8K by 16 bits and confirms read-while-write capability. The boot section supports protected startup code, while the internal RAM accommodates interrupt handlers, task state, communication buffers, and event-driven data movement.
What can replace the ATXMEGA16A4U-AN on the same PCB?
The ATXMEGA16A4U-AU is the closest documented same-package replacement because it uses the same 44-pin TQFP footprint and retains the A4U peripheral architecture. Its temperature grade differs from the ATXMEGA16A4U-AN, so it is appropriate only when the lower maximum operating temperature remains acceptable. The non-U ATXMEGA16A4-AU may share the footprint but lacks the same integrated-peripheral feature set, making it unsuitable as an unconditional drop-in replacement.
Is ATXMEGA16A4U-AU the same as ATXMEGA16A4U-AN?
The ATXMEGA16A4U-AU and ATXMEGA16A4U-AN share the ATXMEGA16A4U device identity and 44-pin TQFP package, while their order-code suffixes distinguish packaging and temperature qualifications. The ATXMEGA16A4U-AN is specified for a maximum temperature of 105 °C. Before using the AU variant as a replacement, confirm that the required ambient and junction temperatures, PCB footprint, clock configuration, fuse settings, and programmed firmware remain valid.
When should I choose ATXMEGA16A4U-AN over ATXMEGA16A4U-AU?
Choose the ATXMEGA16A4U-AN when the design must operate at temperatures approaching the 105 °C maximum specified for that order code. The ATXMEGA16A4U-AU is suitable when the application remains within its lower temperature grade and the PCB can use the same 44-pin TQFP land pattern. Both belong to the A4U family, so their core memory and peripheral architecture are closely related, but the exact suffix must still be confirmed against the application's environmental requirements.
Is ATXMEGA16A4U-AN suitable for an industrial sensor controller?
The ATXMEGA16A4U-AN is suitable for an industrial sensor controller when its 1.6 V to 3.6 V supply range, 34 I/O lines, 16-bit timers, and communication interfaces match the system. Its 105 °C maximum temperature specification supports applications above the typical commercial temperature range. The four-channel DMA controller and eight-channel event system can move sensor data and trigger sampling sequences efficiently, although the enclosure temperature must remain below the device's applicable operating limits.
ATXMEGA16A4U-AN vs ATXMEGA16A4U-AU: which is better for a high-temperature design?
The ATXMEGA16A4U-AN is the better choice for a high-temperature design because its order code is specified for a maximum temperature of 105 °C. The ATXMEGA16A4U-AU uses the same 44-pin TQFP architecture but carries a lower temperature grade. Microchip Technology's product information identifies the AN version as the 105 °C option, making it the appropriate selection when the enclosure, ambient conditions, and board self-heating could exceed the AU variant's rating.
What are the main differences between ATXMEGA16A4U and ATXMEGA16A4-AU?
The principal difference is the integrated A4U peripheral feature set rather than basic CPU speed or memory capacity. The ATXMEGA16A4U family includes the enhanced event system, DMA support, and other peripherals described by the manufacturer, while the earlier non-U A4 implementation does not provide the same feature set. Because register definitions and firmware initialization can differ, replacing an ATXMEGA16A4-AU with an ATXMEGA16A4U-AN requires an engineering review even when the board footprint is compatible.
How much current and power does the ATXMEGA16A4U-AN consume?
The ATXMEGA16A4U-AN is designed for low-power operation, but its consumption depends on voltage, clock frequency, active peripherals, I/O loading, sleep mode, and the selected clock configuration. According to the manufacturer datasheet, engineers should use the active, idle, sleep, and power-down current tables for the actual operating condition. The device's 32 MHz capability supports high-throughput processing, while its sleep and power-saving modes are more appropriate for battery-operated sensor nodes that spend most of their time waiting for events.
Which programming tools are compatible with ATXMEGA16A4U-AN?
The ATXMEGA16A4U-AN is supported by Microchip Technology's AVR programming and debug toolchain. The manufacturer product resources identify the device as an AVR XMEGA controller, for which compatible programming and debugging tools include programmers and debuggers supporting the AVR family. Use the current Microchip development-tool selection guidance to confirm the exact hardware interface, programming adapter, debugger, and device pack required for in-system programming and firmware updates.
Is the ATXMEGA16A4U-AN RoHS compliant?
The ATXMEGA16A4U-AN is identified as RoHS compliant in its product-listing information. RoHS compliance concerns restricted substances in the component and its manufacturing materials; it does not by itself establish suitability for every industrial, automotive, or environmental requirement. For a finished system, check the latest manufacturer declarations and your company’s procurement rules for REACH, halogen-free, conflict-minerals, and extended-temperature requirements.
Where can I buy ATXMEGA16A4U-AN online and what is the current lead time?
Use the Request a Quote form on this page to request the current ATXMEGA16A4U-AN price, stock position, minimum order quantity, and production lead time. Quote requests should include the exact ATXMEGA16A4U-AN suffix, target quantity, delivery location, and required date. Because lead time and allocation can change without notice, confirm the order acknowledgment before committing components to a production schedule.
What is the price of ATXMEGA16A4U-AN and is it in stock?
The current ATXMEGA16A4U-AN price and stock status should be obtained through the Request a Quote form on this page. The exact suffix identifies the 44-pin TQFP device with a 105 °C temperature designation, so do not substitute another package or suffix when requesting a quotation. For production planning, request confirmation of available quantity, factory allocation, and the earliest possible delivery date.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা ATXMEGA16A4U-AN — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose the ATXMEGA16A4U-AN for a 44-pin TQFP design that needs a 32 MHz AVR XMEGA controller, 16 KB Flash, multiple serial interfaces, deterministic event routing, and operation approaching 105 °C. Choose the ATXMEGA16A4U-AU when the same A4U architecture and footprint are needed but the application's temperature range remains within the AU grade. Consider the ATXMEGA32A4U-AU when additional program memory justifies a firmware and memory-map review; its faster clock rate is unchanged, but the larger Flash changes linker and application requirements. Avoid using the earlier non-U ATXMEGA16A4-AU as an automatic substitute because its peripheral set differs. For every alternative, confirm package pins, clock behavior, fuse settings, peripheral multiplexing, boot configuration, and environmental requirements before PCB reuse.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য ATXMEGA16A4U-AU ATXMEGA32A4U-AU
Package 44-pin TQFP, 10 mm x 10 mm 44-pin TQFP, 10 mm x 10 mm 44-pin TQFP, 10 mm x 10 mm
Brand Microchip Technology Microchip Technology Microchip Technology
Maximum Clock Frequency 32 MHz 32 MHz 32 MHz
Maximum Throughput 32 MIPS 32 MIPS 32 MIPS
Flash Program Memory 16 KB 16 KB 32 KB

মূল পার্থক্যসমূহ

  • Extended 105 °C temperature designation (বনামATXMEGA16A4U-AU)
  • Integrated event-driven control resources (বনামATXMEGA16A4-AU)
  • Five USARTs in a compact TQFP (বনামATXMEGA16A4U-AU)

ডিজাইন নোট

Place the required supply capacitors close to the device's power and ground pins, and keep the return path short and continuous. The 1.6 V to 3.6 V operating range does not make the controller immune to supply transients, analog noise, or incorrect power sequencing. Review the manufacturer power-supply recommendations and pin-description table for the exact decoupling configuration, and avoid sharing narrow supply traces between the digital core and sensitive analog loads.

Assign every external signal from the manufacturer's 44-pin TQFP pin-description table before finalizing the schematic and footprint. The 34 I/O lines often have multiple peripheral functions, so changing a pin from GPIO to a communications, timer, or analog function can alter the routing requirement. Preserve access to programming and debug signals, maintain appropriate clearances around exposed or sensitive nets, and compare the recommended land pattern with the selected package suffix rather than relying only on the generic TQFP-44 drawing.

Route the reference clock, programming interface, and communication signals away from high-current switching nodes and noisy analog sources. For designs using the external bus interface, maintain controlled edge rates and follow the manufacturer's guidance on drive strength, capacitance, and signal integrity. Keep analog inputs short and shield them from adjacent digital activity where practical. A careful ground partition can improve measurement quality, but avoid splits that return high-frequency peripheral currents through analog circuitry.

Do not treat a package-compatible substitution as automatically firmware-compatible. Moving from ATXMEGA16A4U-AN to ATXMEGA16A4U-AU requires checking the temperature grade, while moving to a different flash-memory member requires reviewing linker placement, boot-section assumptions, fuse values, and application code. The earlier non-U ATXMEGA16A4-AU also lacks the complete A4U peripheral set. Rebuild and test the firmware, and verify clocks, peripherals, communications, and analog functions before production release.

কমপ্লায়েন্স তথ্য

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

RoHS compliance is identified in product-listing information. No separate REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification statement was confirmed.

ডেটা যাচাই করা হয়েছে: 2026-11-16 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

atxmega16a4u pinout diagram atxmega16a4u datasheet ATXMEGA16A4U-AN datasheet ATXMEGA16A4U-AN pinout ATXMEGA16A4U-AN TQFP-44 ATXMEGA16A4U-AN specifications ATXMEGA16A4U-AN 32MHz ATXMEGA16A4U-AN replacement ATXMEGA16A4U-AN vs ATXMEGA16A4U-AU ATXMEGA16A4U-AN price ATXMEGA16A4U-AN stock Microchip ATXMEGA16A4U-AN

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Microchip Technology ATXMEGA16A4U-AN ATXMEGA16A4U ATXMEGA16A4U-AU ATXMEGA32A4U-AU ATXMEGA16A4-AU AVR XMEGA AVR RISC microcontroller 8/16-bit microcontroller embedded processor system-on-chip self-programming Flash read-while-write DMA controller event system programmable multilevel interrupt controller real-time counter timer/counter USART external bus interface general-purpose I/O TQFP-44 surface-mount technology RoHS REACH
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন