CD4518BPW - Dual BCD Up-Counter | Texas Instruments
MPN: CD4518BPW ✓ সক্রিয়CD4518BPW সারাংশ
An up-counter is a sequential logic device that increments its internal count when a clock edge is applied. The CD4518B combines two independently clocked counter sections with parallel BCD outputs, making it useful for implementing multi-digit decade counters, event counters, programmable timers, and digital sequencing functions. Its CMOS construction places it within the broader logic IC and counter IC hierarchy.
Key features include two 4-bit counter elements, positive and negative edge triggering, parallel BCD outputs, and operation from 3 V to 18 V. The wide supply-voltage range allows the same counter to operate across low-voltage and conventional 5 V CMOS logic systems. The BCD organization is particularly useful when driving displays, transferring decimal counts to a controller, or building cascaded multidigit counters.
The CD4518BPW uses the CD4518B counter architecture, with clock, reset, set, and count inputs for each counter section. Cascading multiple counter sections can extend the count range, while the separate counter elements can serve independent counting channels. Designers should account for propagation delays and account for the required reset or set conditions during initialization.
Typical applications include digital frequency dividers, event counters, industrial control panels, digital clocks, instrumentation interfaces, and programmable sequence controllers. The 16-lead TSSOP package is suitable for compact surface-mount assemblies, while the -55 °C to 125 °C operating range supports industrial and extended-temperature environments.
A key design consideration is the counter's clock edge configuration. The device supports positive and negative triggering, allowing it to follow the polarity conventions of the surrounding system. Designers should use the manufacturer pin-description table when assigning PCB tracks and should verify the reset and set inputs are inactive during normal counting operation.
This product page combines the manufacturer product description, distributor package information, sourcing context, alternative-part assessment, and practical design guidance to help engineers evaluate the CD4518BPW for new and existing counter-based designs.
এর জন্য ড্রপ-ইন বিকল্প CD4518BPW — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
CD4518BPWG4
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
CD4518BPWR
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
CD4518BPW সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Product Type | CMOS dual BCD up-counter IC |
| Counter Elements | 2 |
| Counter Width | 4 bits per counter |
| Counting Direction | Up |
| Clock Triggering | Positive and negative edge |
| Logic Family | CMOS |
| Supply Voltage Range | 3 V to 18 V |
| অপারেটিং তাপমাত্রার পরিসর | -55 °C to 125 °C |
| প্যাকেজ | 16-lead TSSOP (PW) |
| পিন সংখ্যা | 16 pins |
| মাউন্টিং টাইপ | Surface mount |
| Counter Output Format | BCD |
| Number of Counter Outputs | 8 BCD output lines total |
| Manufacturer | Texas Instruments |
| Product Status | Active |
| RoHS স্ট্যাটাস | Compliant |
| REACH Status | unknown |
| AEC-Q100 Qualification | not_applicable |
| Lead-Free Status | unknown |
| Halogen-Free Status | unknown |
CD4518BPW 16-lead tssop (pw) পিন কনফিগারেশন গাইড
CD4518BPW (16-lead tssop (pw) প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি CD4518BPW.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
CD4518BPW এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Digital Frequency Divider, Multidigit Decimal Display Counter, Industrial Event Counter, Programmable Sequence Controller, Instrumentation Timing Reference, Digital Clock and Batch Counter.
Digital Frequency Divider
CD4518BPW suits digital frequency-divider designs because each 4-bit BCD counter section advances on a selectable positive or negative clock edge. One counter can divide an incoming event stream by a selected decade relationship while the second section provides a related count or cascaded stage. The 3 V to 18 V supply range supports both modern low-voltage logic and established 5 V CMOS systems. In implementation, keep the clock source clean, initialize the counter through its reset or set inputs, and account for propagation delay when determining the maximum usable input frequency. The -55 °C to 125 °C specification makes the device suitable for industrial instrumentation and control panels.
সুপারিশকৃত
Multidigit Decimal Display Counter
The CD4518BPW is appropriate for decimal display counting because its two counter elements provide BCD outputs directly rather than binary-only count states. Cascading the sections with suitable decade logic allows a small system to count and display more than one decimal digit. Positive and negative edge triggering helps the designer match clocking conventions in display and control circuitry. The 16-lead TSSOP package conserves PCB area compared with larger DIP implementations, while the 3 V to 18 V operating range allows direct use in compatible CMOS systems. Decoupling near the supply pins and proper grounding are essential for stable counting.
সুপারিশকৃত
Industrial Event Counter
CD4518BPW can serve as an event counter in industrial control systems where external sensors produce repeatable pulses or level transitions. The selectable edge triggering reduces compatibility problems with different sensor output conventions, while the BCD outputs make the accumulated count easy to inspect with decimal logic. Its extended -55 °C to 125 °C rating supports demanding equipment environments. For reliable operation, use input conditioning or Schmitt-trigger logic when sensor signals are slow or noisy, and debounce mechanical contacts before they reach the clock input. The counter should be reset or set deterministically at system startup.
সুপারিশকৃত
Programmable Sequence Controller
The CD4518BPW is useful for compact programmable sequence and timing logic because two independent counter sections can represent related steps or count multiple events. BCD outputs simplify interfacing with decade-decoded control stages, and the package keeps the design compact for surface-mount assemblies. Designers can combine the counter outputs with latch and logic gates to create repeatable step sequences, batch counters, or process-cycle timers. The wide 3 V to 18 V supply range supports different logic rails, but the external interface must use compatible levels. Timing accuracy should be validated with the actual clock source and wiring parasitics rather than inferred solely from nominal logic delay.
সুপারিশকৃত
Instrumentation Timing Reference
CD4518BPW can be used in instrumentation timing and measurement systems to divide, count, or trigger repeated sampling events. The BCD architecture is convenient for panel indicators and human-readable status displays, while the dual counter arrangement allows two related timing channels in one package. Its 16-pin TSSOP footprint supports compact analog and digital measurement equipment, and the extended temperature range suits industrial instrumentation. Keep clock and control traces away from sensitive analog paths, provide local supply bypassing, and use a clean, low-jitter reference when stable timing is required. The device does not replace a precision timer when the application requires calibrated long-duration timing.
সুপারিশকৃত
Digital Clock and Batch Counter
CD4518BPW is well suited to digital clock, batching, and repeat-count functions that depend on decade counting rather than arbitrary binary sequences. Two BCD counter elements can support count-and-display stages or provide a staged divide-by-ten arrangement. Positive and negative clock-edge options allow integration with different system timing conventions, and the compact 16-TSSOP package is useful in control panels and compact embedded equipment. During layout, route the clock with controlled impedance if the source is fast, keep reset and set traces short, and decouple the supply close to the device. Validate maximum clock frequency and output-transition behavior in the complete circuit.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা CD4518BPW — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | CD4518BPWG4 | CD4518BPWR |
|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 16-lead TSSOP (PW) | 16-TSSOP | 16-TSSOP |
| Product Type | CMOS dual BCD up-counter | Counter IC, BCD counter | Counter IC, BCD counter |
| Counter Elements | 2 | 2 | 2 |
| Counter Width | 4 bits | 4 bits | 4 bits |
| Counting Direction | Up | Up | Up |
| Clock Triggering | Positive and negative edge | Positive and negative edge | Positive and negative edge |
| Output Format | BCD | BCD | BCD |
| Ordering/Packaging Suffix | BPW | G4 ordering variant | Tape-and-reel ordering variant |
মূল পার্থক্যসমূহ
- Dual BCD counter integration (বনামCD4518BPWG4)
- TSSOP footprint reuse (বনামCD4518BPWR)
- Wide supply compatibility (বনামCD4518BPWG4)
ডিজাইন নোট
Use the manufacturer pin-description table to assign the 16 TSSOP signals, and place the device where clock and set/reset traces can remain short. Keep the 3 V to 18 V supply connection close to the device with local bypassing, and provide a solid ground reference for all counter inputs. The exposed product-page information does not reproduce individual pin names, so do not infer pin assignments from generic CD4518 diagrams without checking the exact datasheet.
Initialize the counter intentionally using the reset and set functions rather than relying on power-up state. Confirm that clock polarity matches the selected positive or negative triggering mode, and do not allow unused inputs to float. Mechanical switch bounce and slow sensor edges can create extra counts, so add suitable debounce or conditioning circuits before the clock input when the source is not a clean digital waveform.
Keep the clock path short and away from noisy analog or switching nodes. If the clock frequency is high, use a controlled source and account for clock distribution delay and counter propagation delay. A clean ground return and local supply decoupling are especially important when the counter is used for measurement timing. Validate the maximum operating frequency and output behavior in the complete board rather than relying only on nominal logic timing.
কমপ্লায়েন্স তথ্য
RoHS compliance is listed in the available distributor category results for the CD4518 family. REACH, lead-free, halogen-free, and conflict-minerals information were not identified for this exact ordering code.