Texas Instruments

CD4541BPW 100kHz CMOS Programmable Timer | Texas Instruments

MPN: CD4541BPW ✓ সক্রিয়
20 V Vdss 14-pin TSSOP (PW) Package 100 kHz Speed
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

CD4541BPW সারাংশ

Texas Instruments CD4541BPW is a CMOS programmable timer and oscillator with a maximum operating frequency of 100 kHz, supplied in a 14-pin TSSOP package. The device belongs to the CD4000B CMOS timer family and is designed for timing, delay, pulse-generation, and periodic-waveform applications. Its operating supply rating extends to 20 V, making it suitable for systems using higher voltage control rails than conventional low-voltage CMOS logic.

A programmable timer is an integrated timing component that combines an internal oscillator with selectable timing stages, counter logic, and output controls. In the CD4541BPW, the oscillator and counter chain can produce divided-frequency timing signals, while the MODE input selects between continuous square-wave operation and one-shot operation after MASTER RESET. The output stage includes Q and complementary Q-bar functions, allowing a design to use either active-high or active-low timing signals.

The CD4541BPW uses a 14-pin TSSOP package and supports CMOS operation. Its programming is performed with external resistors and capacitors connected to the oscillator and timing inputs, allowing the designer to set the oscillator frequency and output frequency relationship. The MODE input on pin 10 provides the key operating-state selection described in the Texas Instruments datasheet. The device also includes a MASTER RESET input for initializing the timing sequence.

Typical uses include precision delay circuits, pulse generation, periodic control signals, clock division, industrial sequencing, test and measurement equipment, and low-cost embedded timing functions. Compared with a microcontroller-based timer, the CD4541BPW provides a compact hardware-only implementation with fewer software dependencies. Compared with a simple RC oscillator, its selectable counter stages and dual outputs provide additional timing flexibility.

When designing a circuit around the CD4541BPW, calculate the oscillator frequency from the manufacturer timing equations and the selected external RC components. Keep the RESET and MODE control inputs driven to defined logic levels, and use suitable bypass capacitance near the supply pins. Verify the maximum supply voltage, output timing tolerance, and propagation delay against the required system timing budget. The TSSOP package is also sensitive to soldering and thermal conditions, so assembly processes should use the manufacturer’s recommended land pattern and moisture-handling practices.

এর জন্য ড্রপ-ইন বিকল্প CD4541BPW — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible CD4541BPW (একই form factor এবং footprint) — পার্থক্য রয়েছে Mounting Type, Package.

Texas Instruments
Mounting Type: Through-hole
Package: 14-CDIP
এর সাথে তুলনা করুন CD4541BPW →

CD4541BPW

✅ ড্রপ-ইন
Texas Instruments
📦 TSSOP-14 (PW)
CMOS programmable timer · 100 kHz · 20 V · CD4000B CMOS · 14-pin TSSOP (PW) · Surface mount · 14 pins · Continuous oscillator mode and one-shot mode

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

CD4541BPW বিশেষণ

Product Type CMOS programmable timer
Maximum Operating Frequency 100 kHz
Supply Voltage Rating 20 V
Logic Family CD4000B CMOS
প্যাকেজ 14-pin TSSOP (PW)
মাউন্টিং টাইপ Surface mount
পিনের সংখ্যা 14 pins
Operating Modes Continuous oscillator mode and one-shot mode
Mode Control Input MODE input on pin 10
Reset Function MASTER RESET
Oscillator Output OSC OUT
Oscillator Input OSC IN
Counter Inputs CP0 and CP1
Output Signals Q and Q-bar outputs
Maximum Input Voltage Classification 20 V high-voltage rating

CD4541BPW পিন কনফিগারেশন

TSSOP-14 (4.4mm) Package Pinout Diagram TSSOP-14 4.4x5mm, P0.65mm, JEDEC MO-153. 14-pin thin shrink. 1 14 2 13 3 12 4 11 5 10 6 9 7 8 TSSOP-14 (4.4mm)
পিন 1 VDD — Power supply
পিন 2 OSC OUT — Oscillator output
পিন 3 OSC IN — Oscillator input
পিন 4 VSS — Ground
পিন 5 MR — Master reset input
পিন 6 CP0 — Counter programming input 0
পিন 7 CP1 — Counter programming input 1
পিন 8 Q — Noninverted output
পিন 9 Q-bar — Inverted output
পিন 10 MODE — Operating-mode selection input
পিন 11 NC — Not connected
পিন 12 NC — Not connected
পিন 13 NC — Not connected
পিন 14 VDD — Power supply

সাধারণ ব্যবহার

CD4541BPW এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial sequence and delay control, Pulse generation and one-shot timing, Precision periodic waveform generation, Test and measurement trigger circuits, LED flashing and indicator timing, Low-cost embedded timing subsystem.

🏭

Industrial sequence and delay control

The CD4541BPW suits industrial timing blocks that need periodic control pulses, adjustable delays, or divided clock outputs without a microcontroller. Its oscillator and counter inputs allow the timing period to be set with external components, while the MODE input on pin 10 selects continuous square-wave operation or one-shot behavior after MASTER RESET. The Q and Q-bar outputs provide both active-high and active-low signals for driving relay logic, indicator circuits, or sequencing stages. Because the device is a 20 V-rated CMOS timer, it can also be paired with higher-voltage control interfaces when the surrounding circuitry remains within the datasheet limits. Confirm temperature range, noise margins, and reset behavior for the final industrial equipment design.

⚡

Pulse generation and one-shot timing

Use the CD4541BPW when a circuit needs a delayed pulse or a one-shot output triggered by an external event. The oscillator section and counter chain establish the timing interval, while the MODE input selects the one-shot operating behavior following a MASTER RESET pulse. The selected Q or Q-bar output can then trigger a downstream latch, gate, pulse transformer driver, or test instrument. Timing accuracy depends on the external resistor and capacitor values, the selected counter stage, supply voltage, and the propagation-delay limits in the manufacturer datasheet. For repeatable production behavior, use stable timing components and include reset and mode traces that remain well defined during power-up.

🌐

Precision periodic waveform generation

The CD4541BPW can generate a continuous square-wave output whose frequency is related to the oscillator frequency and the selected counter division stage. This makes it useful for clock distribution, blinking indicators, repetitive sampling triggers, and simple modulation-support circuits. A logic-high MODE input selects the continuous operating mode described by TI, while the counter inputs establish the division relationship. The device’s 100 kHz maximum operating frequency gives design flexibility for higher-rate timing tasks, but the actual operating point must remain within the external-component and electrical limits. Use the datasheet timing equations to select RC values and verify output rise and fall behavior in the final load configuration.

🖥️

Test and measurement trigger circuits

In test and measurement equipment, the CD4541BPW can provide a repeatable periodic trigger, delayed gate, or divided clock reference without adding processor overhead. Its Q and Q-bar outputs allow a trigger to be interfaced with either active-high or active-low instrumentation. The timer is particularly useful where a fixed timing network is acceptable and the circuit must continue operating independently of software. A MASTER RESET input can synchronize the timer with another measurement event, and the MODE input allows the same device family to support repeatable or one-shot timing. Validate output jitter, trigger delay, supply-noise sensitivity, and load capacitance against the measurement system’s requirements before production use.

💡

LED flashing and indicator timing

The CD4541BPW is a straightforward choice for LED blinking, periodic beacon, and status-indicator circuits because it combines an oscillator with programmable divider stages. The timer can drive a transistor or buffer stage instead of loading the output directly, allowing the LED current and polarity to be selected independently of the timer output. Set the oscillator frequency and counter division to obtain the required visible or system timing cadence, and use the Q or Q-bar output to select active-high or active-low drive behavior. For low-power designs, account for the timer’s operating supply and load requirements, ensure the indicator path does not distort the timing waveform, and use a suitable current-limiting resistor or driver according to the LED requirements.

🔧

Low-cost embedded timing subsystem

The CD4541BPW can act as a dedicated timing subsystem in a larger embedded design when a microcontroller already handles other functions. Offloading repetitive timing to the timer reduces interrupt load and provides a hardware output that remains stable even while the controller is busy. The programmable counter stages can generate a slower supervisory clock, while the Q/Q-bar outputs can provide complementary edge signals for data capture or actuator control. The device is particularly useful when firmware timing resolution is unnecessary but repeatable periods and reset synchronization are important. Review the CD4541B electrical limits, oscillator stability requirements, and logic-level compatibility with the controller before selecting it.

What is the CD4541BPW?
The CD4541BPW is a Texas Instruments CMOS programmable timer and oscillator rated for operation up to 100 kHz in a 14-pin TSSOP package. According to the TI product page, it is a high-voltage CD4000B timer with a 20 V rating. It combines an oscillator, programmable counter stages, MASTER RESET, MODE control, and Q/Q-bar outputs for timing and pulse-generation circuits.
What is the operating voltage of the CD4541BPW?
The CD4541BPW has a 20 V high-voltage rating according to the Texas Instruments CD4541B datasheet and product information. The exact recommended operating supply range and absolute maximum limits should be taken from the manufacturer datasheet for the specific temperature and device grade. Do not assume that the 20 V rating applies to every pin without checking the input and output limits.
How does the MODE input work on the CD4541BPW?
MODE pin 10 selects continuous square-wave operation or one-shot operation. The Texas Instruments datasheet states that a logic-high MODE input produces a continuous square wave whose frequency is the oscillator frequency divided by 2N. With MODE low, the selected output changes state after MASTER RESET is initiated. The counter stage N determines the division ratio.
Can the CD4541BPW generate a delay or one-shot pulse?
Yes. With MODE set low, the CD4541BPW can operate as a one-shot timer after MASTER RESET is asserted, allowing an external RC network and counter selection to determine the timing interval. The exact minimum pulse width and propagation-delay limits must be checked in the TI CD4541B datasheet. For continuous repetition, set MODE high and use the divided oscillator output.
What is the maximum frequency of the CD4541BPW?
The CD4541BPW is specified as a 100 kHz programmable timer in the Texas Instruments product listing. The usable operating frequency also depends on the external oscillator components, the selected counter stage, supply voltage, and timing tolerances. The 100 kHz value is a device capability, not a guarantee that every external component arrangement will achieve it.
What package does the CD4541BPW use?
The CD4541BPW is supplied in a 14-pin TSSOP package designated PW by Texas Instruments. The package is a surface-mount plastic small-outline package. The pin count is 14, and the package includes the oscillator, timing, reset, mode, supply, and Q/Q-bar signal connections described in the manufacturer pinout.
Where can I download the CD4541BPW datasheet PDF?
The official Texas Instruments CD4541B datasheet PDF is available at https://www.ti.com/lit/ds/symlink/cd4541b.pdf. It contains the operating modes, oscillator information, timing equations, pin description, absolute maximum ratings, and recommended operating conditions for the CD4541B family. Use the CD4541BPW orderable information on TI’s product page to confirm the package and device variant.
Where can I find the CD4541BPW pinout?
The CD4541BPW pinout is shown in the Texas Instruments CD4541B datasheet and on the TI product page for the PW package. The 14-pin TSSOP arrangement includes the power, oscillator, timing, reset, mode, and output functions. When laying out a PCB, use the package drawing and pin-description table in the manufacturer documentation rather than relying on a generic CD4541 diagram.
What are the key specifications engineers should know about CD4541BPW?
The CD4541BPW is a 14-pin CMOS programmable timer with a 100 kHz maximum operating frequency and a 20 V high-voltage rating. Its important functional specifications are the oscillator and counter inputs, programmable frequency division, MODE selection on pin 10, MASTER RESET, and Q/Q-bar outputs. The Texas Instruments CD4541B datasheet is the controlling reference for timing equations, electrical limits, and recommended external components.
Is CD4541BPW suitable for industrial timing control?
The CD4541BPW can be suitable for industrial control tasks when the system stays within the manufacturer’s electrical ratings and the application does not require automotive qualification. Its programmable counter, reset input, and complementary outputs are useful for sequencing and periodic control. Confirm operating temperature, noise immunity, supply tolerance, and qualification requirements in the TI CD4541B documentation before finalizing an industrial design.
What can replace the CD4541BPW?
A direct drop-in replacement must match the 14-pin TSSOP footprint and preserve the oscillator, counter, reset, mode, and output functions. The available cross-reference information identifies other CD4541-family devices, but package variants and through-hole MC14541 devices are not direct replacements for a CD4541BPW PCB. Validate the exact pinout and electrical timing before substituting any part.
Is the MC14541BCPG a drop-in replacement for CD4541BPW?
No. The MC14541BCPG is listed as a 14-pin through-hole DIP device, while the CD4541BPW uses a 14-pin TSSOP surface-mount package. Although both are CD4541-family programmable timers, their physical footprints are different and the parts cannot be substituted on the same PCB without redesign. The MC14541BCPG is therefore not a true drop-in replacement.
What is the difference between CD4541BPW and a CD4541BE?
The CD4541BPW and CD4541BE are functionally related CD4541B timer variants, but their packages differ. CD4541BPW uses a 14-pin TSSOP package, whereas CD4541BE is a through-hole 14-pin DIP device. A CD4541BE may be suitable for a new through-hole prototype, but it is not a drop-in replacement for a PCB designed around the CD4541BPW footprint.
When should I choose the CD4541BPW instead of a microcontroller timer?
Choose the CD4541BPW when the required timing function is fixed, the system needs autonomous operation, or avoiding firmware reduces complexity. The timer can generate divided-frequency, continuous, or one-shot timing signals using external RC components and logic inputs. A microcontroller is preferable when timing must be software-configurable, coordinated with other digital functions, or changed frequently in the field.
Is the CD4541BPW in stock and what is its price?
Current stock and pricing for the CD4541BPW should be confirmed through the Request a Quote form on this page. The Texas Instruments product page and authorized distribution information identify the part and its ordering configuration, but pricing and availability can change by quantity and region. Use the quote form for a current unit price, stock status, lead time, and MOQ for the exact CD4541BPW package.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা CD4541BPW — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose the CD4541BPW for compact, hardware-based timing designs that require a programmable oscillator, divided outputs, MASTER RESET, and Q/Q-bar signals in a 14-pin TSSOP package. It is especially appropriate when the timing behavior is fixed and avoiding a microcontroller simplifies the design. Choose a through-hole CD4541BE or MC14541BCPG only when the PCB is being redesigned around a DIP footprint; neither is a drop-in substitute for the PW package. For applications requiring software-programmable intervals, coordinated timers, or complex event sequencing, a microcontroller may be more flexible. For new industrial or automotive products, verify operating temperature, qualification, electrical limits, and component availability against the complete system requirements before releasing the design.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য CD4541BPW
Package TSSOP-14 (PW) TSSOP-14 (PW) - same
Brand Texas Instruments Texas Instruments
Product Type CMOS programmable timer CMOS programmable timer
Maximum Operating Frequency 100 kHz 100 kHz
Supply Voltage Rating 20 V 20 V
Logic Family CD4000B CMOS CD4000B CMOS
Number of Pins 14 pins 14 pins
Operating Modes Continuous square-wave and one-shot modes Continuous square-wave and one-shot modes
Mode Control Input MODE, pin 10 MODE, pin 10
Output Signals Q and Q-bar Q and Q-bar

মূল পার্থক্যসমূহ

  • Dedicated hardware timing without firmware (বনামMicrocontroller-based timer implementation)
  • Selectable operating behavior (বনামCD4541BE)
  • Higher integration in a surface-mount package (বনামMC14541BCPG)

ডিজাইন নোট

Use the TI CD4541B datasheet as the controlling reference for the oscillator timing equations, counter-stage mapping, and output behavior. Set MODE and MASTER RESET to defined levels during power-up, because leaving a control input floating can produce inconsistent timing states. Do not substitute the through-hole CD4541BE or MC14541BCPG directly for CD4541BPW without changing the PCB footprint.

Place the oscillator and timing components close to the corresponding device pins to minimize parasitic capacitance and noise pickup. Route the oscillator loop compactly and keep the timing-node traces away from high-current switching nodes. Use a short ground return and place the supply bypass capacitor close to the power pins according to the manufacturer’s recommended layout guidance.

The CD4541BPW is identified as a high-voltage CMOS timer with a 20 V rating, but the application still requires verification of the actual supply range, input thresholds, and output limits for the selected operating conditions. Do not assume that every signal pin can be driven to the full 20 V. Add appropriate interface protection when the timer is exposed to inductive loads, long wiring, or externally accessible signals.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The manufacturer identifies the CD4541B as a CMOS programmable timer with a 20 V rating. Specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations are not stated in the product information used for this record.

ডেটা যাচাই করা হয়েছে: 2026-11-10 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

CD4541BPW datasheet CD4541BPW pinout CD4541BPW datasheet pdf CD4541BPW equivalent CD4541BPW replacement CD4541BPW cross reference CD4541BPW vs CD4541BE CD4541BPW TSSOP-14 CD4541BPW programmable timer CD4541BPW 100kHz timer CD4541BPW MODE pin 10 CD4541BPW one-shot operation CD4541BPW industrial timer CD4541BPW price Texas Instruments CD4541BPW

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Texas Instruments CD4541BPW CD4541B CD4000B CMOS programmable timer oscillator frequency divider timer IC clock and timing IC logic IC semiconductor TSSOP-14 PW package surface-mount package SMD MODE input MASTER RESET Q output Q-bar output one-shot mode continuous square wave 100 kHz 20 V industrial timing control
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন