CS5351-DZZ - 24-Bit 192kHz Audio ADC | Cirrus Logic
MPN: CS5351-DZZ ✗ জীবনকালের সমাপ্তিCS5351-DZZ সারাংশ
An audio ADC is a mixed-signal integrated circuit that converts continuous left- and right-channel analog voltages into discrete numerical values. Its role within an audio signal chain is to preserve waveform amplitude and timing while rejecting unwanted out-of-band content. The CS5351 belongs to the broader digital-converter hierarchy, where a delta-sigma modulator and decimation filters form the core of the conversion architecture. Audio performance depends on resolution, sampling rate, signal-to-noise ratio, dynamic range, and rejection of out-of-band frequencies rather than resolution alone.
The CS5351 uses a fifth-order multi-bit delta-sigma modulator followed by digital filtering and decimation. This architecture removes the need for an external anti-alias filter. Differential inputs improve rejection of common-mode noise, an important benefit when the converter shares a ground reference with amplifiers, codecs, digital processors, or switching power converters. Serial output supports integration with digital audio receivers while keeping the external component count and board area relatively low.
With 24-bit resolution, a maximum rate of 192 kSPS per channel, and a stated 108 dB dynamic range, the CS5351 targets professional audio conversion, digital mixing, recording interfaces, consumer playback equipment, and audio processing modules. Its differential architecture and integrated decimation are particularly useful where a compact converter must operate close to switching circuitry or other potentially noisy analog stages.
The primary design consideration is the quality of the analog input path. Differential routing should be symmetric, connector and ground currents should be kept away from sensitive input traces, and input filtering must be selected to preserve the intended audio bandwidth. Supply and reference grounding should follow the layout guidance in the manufacturer datasheet, while external clock and interface routing should maintain short, controlled-impedance paths. Adequate bypass capacitance is necessary close to the device supply pins.
This product page organizes the key electrical characteristics, lifecycle information, procurement details, pin-package constraints, and practical design guidance for the CS5351-DZZ. It also identifies directly documented replacements and distinguishes a manufacturer-identified successor from related converter families that may not preserve the same footprint and function. Engineers should use the manufacturer datasheet and product-change notices for final qualification, pin assignment, and production-release decisions.
এর জন্য ড্রপ-ইন বিকল্প CS5351-DZZ — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই সিরিজের ভ্যারিয়েন্ট
একই সিরিজের মডেল যেগুলো drop-in compatible CS5351-DZZ (একই form factor এবং footprint) — পার্থক্য রয়েছে Maximum Sampling Rate, Package.
CS5351K-DZZ
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
CS5351K-KZZR
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
CS5351-KZ
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
CS5351-DZZ সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Converter Type | Dual-channel audio ADC |
| রেজোলিউশন | 24 bit |
| Maximum Sampling Rate | 192 kSPS per channel |
| Dynamic Range | 108 dB |
| সাপ্লাই ভোল্টেজ | 5 V |
| অপারেটিং তাপমাত্রার পরিসর | -40°C to +85°C |
| Input Architecture | Differential |
| Converter Architecture | Multi-bit delta-sigma modulator |
| Modulator Order | 5th order |
| Digital Filtering | Integrated decimation filter |
| External Anti-Alias Filter | Not required |
| Output Interface | Serial |
| Output Channels | 2 channels |
| প্যাকেজ | 24-lead TSSOP, 4.40 mm body width |
| মাউন্টিং টাইপ | Surface mount |
| RoHS স্ট্যাটাস | Compliant |
CS5351-DZZ 24-lead tssop, 4.40 mm body width পিন কনফিগারেশন গাইড
CS5351-DZZ (24-lead tssop, 4.40 mm body width প্যাকেজ)-এর পিন কনফিগারেশন। এই অ্যানালগ কম্পোনেন্টে ইনপুট, আউটপুট ও পাওয়ার সাপ্লাই পিন রয়েছে। অফসেট নাল, কম্পেনসেশন ও এনেবল পিন কনফিগারেশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। সিগন্যাল কন্ডিশনিং ও অ্যামপ্লিফায়ার সার্কিটের জন্য আদর্শ।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি CS5351-DZZ.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
CS5351-DZZ এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Professional Audio Recording Interface, Digital Audio Mixer, USB and Network Audio Interface, Consumer Audio Playback System, Digital Recording and Monitoring, Broadcast and Studio Monitoring.
Professional Audio Recording Interface
The CS5351-DZZ fits a stereo recording front end that converts balanced left- and right-channel analog audio into 24-bit digital samples at rates as high as 192 kSPS per channel. Its differential input architecture helps reject common-mode noise generated by microphone preamplifiers and line-level circuitry, while the 108 dB stated dynamic range supports high-fidelity capture. The converter’s integrated fifth-order delta-sigma filtering and decimation remove the need for a conventional external anti-alias filter. Place the device close to the input amplifier and codec or digital interface, keep input routing symmetric, and provide local supply bypassing to preserve low-noise operation.
সুপারিশকৃত
Digital Audio Mixer
The CS5351-DZZ is appropriate for a digital mixer or rack processor that needs accurate stereo conversion before mixing, routing, and filtering. It accepts differential analog channels and supplies serial 24-bit data at up to 192 kSPS per channel, allowing the converter to serve high-resolution monitoring or capture paths. The integrated digital decimation reduces the need for an external anti-alias stage and helps control out-of-band energy entering downstream processing. The principal layout concern is isolation from mixer power converters and digital switching currents, so analog input traces should remain short and the converter should use the grounding and bypass arrangement specified in the manufacturer datasheet.
সুপারিশকৃত
USB and Network Audio Interface
The CS5351-DZZ can form the analog-to-digital input stage of a USB or network audio interface, where a stereo analog signal must be converted before a controller packages the audio for a host. Its 24-bit resolution supports high-resolution playback or capture formats, and its maximum 192 kSPS rate accommodates high-rate studio streams. Differential inputs are valuable when the interface also includes microphone or line amplifiers operating from the same board-level reference. Clocking and data routing should be short and controlled, and the analog section should be separated from USB, Ethernet magnetics, and switching-regulator areas to minimize coupling into the converter.
সুপারিশকৃত
Consumer Audio Playback System
The CS5351-DZZ is suitable for a high-resolution consumer playback system that receives analog audio from a DAC, tuner, or external analog source and converts it for digital processing. The 192 kSPS capability allows it to support high-rate audio streams, while 24-bit data preserves a wide numerical range for downstream volume and filtering operations. Its differential analog inputs are useful in systems where input sources share ground with noisy digital and power sections. A practical design should use a low-noise input buffer, symmetric routing, local supply bypass capacitors, and the datasheet-recommended return-plane arrangement to prevent switching noise from limiting the converter’s usable audio fidelity.
সুপারিশকৃত
Digital Recording and Monitoring
The CS5351-DZZ can provide the stereo conversion stage in a digital recording or monitoring system that requires simultaneous left- and right-channel conversion. Its dual-channel architecture reduces the need for separate converter packages, while the stated 108 dB dynamic range and 24-bit resolution are well suited to capturing signals with substantial headroom. The integrated decimation filter is especially useful in compact designs where an external anti-alias network would increase board area. Place the converter after the input amplifiers and ahead of the digital audio processor, and verify that the clock source and serial interface meet the timing requirements listed in the manufacturer datasheet.
সুপারিশকৃত
Broadcast and Studio Monitoring
The CS5351-DZZ is well matched to broadcast or studio monitoring equipment requiring balanced stereo conversion with high resolution and a compact surface-mount footprint. Differential inputs support robust connections to professional audio sources and improve rejection of common-mode interference, while the 192 kSPS maximum rate supports high-resolution monitoring workflows. The converter’s internal decimation simplifies anti-aliasing, but a professional signal chain still requires carefully selected input coupling, gain distribution, and grounding. Keep sensitive analog paths away from display, switching-power, and relay-control currents, and confirm connector return-current paths so they do not share high-current return paths with the converter reference.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা CS5351-DZZ — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | CS5351K-DZZ | CS5351K-KZZR | CS5351-KZ |
|---|---|---|---|---|
| Package | 24-lead TSSOP | 24-lead TSSOP | 24-lead TSSOP | 24-lead TSSOP |
| Brand | Cirrus Logic | Cirrus Logic | Cirrus Logic | Cirrus Logic |
| Converter Type | Dual-channel audio ADC | Audio ADC | Audio ADC | Audio ADC |
| Resolution | 24 bit | 24 bit | 24 bit | 24 bit |
| Maximum Sampling Rate | 192 kSPS per channel | 192 kHz | 192 kHz | 192 kHz |
| Dynamic Range | 108 dB | 108 dB | 108 dB | 108 dB |
| Supply Voltage | 5 V | 5 V | 5 V | 5 V |
মূল পার্থক্যসমূহ
- Direct manufacturer-ecosystem replacement (বনামCS5351K-DZZ)
- High-resolution stereo conversion in the same package (বনামCS5351K-KZZR)
- Integrated anti-alias filtering (বনামCS5351-KZ)
ডিজাইন নোট
Route the differential audio inputs as a tightly coupled pair and keep the analog section physically separated from digital clocks, relay controls, and switching-converter paths. The CS5351 uses differential inputs, so maintaining symmetry helps preserve common-mode rejection and limits conversion of unwanted noise into the digital result. Connect input filtering close to the converter, avoid sharing narrow return paths with high-current loads, and reproduce the manufacturer’s recommended grounding topology rather than creating a separate analog ground plane without analysis.
Place the required bypass capacitors immediately beside the CS5351-DZZ supply pins and follow the capacitance and ESR guidance in the manufacturer datasheet. Keep supply and return paths short because the converter’s 24-bit resolution does not prevent supply noise from limiting system-level signal-to-noise ratio. Decouple upstream switching regulators separately and avoid routing converter supply current through the analog input reference area. Verify power-up and power-down sequencing with the source devices so the analog inputs do not receive an uncontrolled transient.
Use short, properly terminated traces for clock and serial data signals, and follow the manufacturer’s interface timing limits for the selected sample rate. At 192 kSPS, clock and data routing should avoid unnecessary stubs, test pads, and long parallel paths that can produce ringing. Keep high-speed digital returns away from the differential input pair, and place any required digital isolation or series damping close to the driver when edge rates are fast. Validate the complete board with an oscilloscope because the IC’s nominal sampling rate does not guarantee acceptable signal integrity without correct board-level implementation.
কমপ্লায়েন্স তথ্য
The CS5351 comparison record identifies RoHS compliance. The component is an audio ADC and is not presented as an automotive-qualified AEC-Q100 device.