CS8416-DNZ - 8-Channel 192kHz Audio Receiver | Cirrus Logic
MPN: CS8416-DNZ ✓ সক্রিয়CS8416-DNZ সারাংশ
A digital audio receiver is an interface IC that accepts encoded audio data, identifies the supported transport format, and converts that data into a serial digital-audio stream suitable for a DAC, audio processor, or digital mixing system. Within the broader semiconductor hierarchy, the CS8416 belongs to the digital-audio receiver class, then to interface ICs and signal-chain semiconductors. It is designed for systems requiring multiple digital inputs, channel-status handling, and flexible configuration rather than analog audio amplification.
The CS8416 supports sample rates through 192 kHz and can operate in software-controlled or hardware-controlled configuration. The software mode uses a selectable control port, while hardware mode uses dedicated configuration pins. This flexibility allows the same receiver architecture to serve professional equipment, consumer audio products, and multi-input monitoring systems. The eight-input multiplexer also helps reduce the number of separate receiver devices required in a rack or board with several S/PDIF or AES/EBU sources.
The monolithic CMOS implementation integrates receiver and decoding functions in one device. According to the Cirrus Logic CS8416 datasheet DS578F4, the device receives one of eight stereo pairs of digital-audio data and supports the IEC60958, S/PDIF, EIAJ CP1201, and AES3 standards. The output architecture provides a serial digital-audio port, while control and channel-status functions support practical system implementation.
Typical applications include professional digital mixers, multichannel recording equipment, broadcast consoles, surround-sound processors, digital audio routers, computer-audio interfaces, and consumer receivers with multiple coaxial or optical inputs. The 192 kHz capability also makes the part relevant to high-resolution audio paths, provided that the upstream source, transport wiring, clocking arrangement, and downstream converter support the selected rate.
PCB design should preserve short, controlled-impedance routes from each digital-audio input to the receiver and keep the serial output path away from noisy switching nodes. Grounding and decoupling should follow the layout guidance in the manufacturer datasheet. Verify input levels, supported sampling rates, master-clock requirements, and software configuration before finalizing a multichannel board because those details determine whether a single CS8416 is sufficient.
This page combines the CS8416 interface architecture, protocol support, package information, application guidance, and verified sourcing information. It also distinguishes documented functions from unresolved replacement questions, helping engineers plan receiver selection, board integration, and multi-channel audio routing without treating nonverified equivalents as drop-in devices.
এর জন্য ড্রপ-ইন বিকল্প CS8416-DNZ — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই পণ্যের জন্য কোনো ড্রপ-ইন বিকল্প পাওয়া যায়নি।
বিকল্প অনুরোধ করুনCS8416-DNZ সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Product Type | Digital audio interface receiver |
| Architecture | Monolithic CMOS |
| Input Configuration | 8 stereo digital audio inputs |
| Input Multiplexer Ratio | 8:2 |
| Maximum Sample Rate | 192 kHz |
| Supported Audio Standards | IEC60958, S/PDIF, EIAJ CP1201, AES3 |
| Output Interface | Serial digital audio |
| Control Modes | Software mode and hardware mode |
| Package Type | 28-pin QFN |
| Package Dimensions | 5 mm x 5 mm |
| মাউন্টিং টাইপ | Surface mount |
| Digital Audio Input Format | IEC60958, S/PDIF, EIAJ CP1201, AES3 |
| RoHS স্ট্যাটাস | Unknown |
| REACH Status | Unknown |
| AEC-Q100 Qualification | Unknown |
CS8416-DNZ 5 mm x 5 mm পিন কনফিগারেশন গাইড
CS8416-DNZ (5 mm x 5 mm প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি CS8416-DNZ.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
CS8416-DNZ এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Professional Digital Audio Mixer, Digital Audio Router, Broadcast Console, Multichannel Recording System, Surround-Sound Processor, Computer Audio Interface.
Professional Digital Audio Mixer
The CS8416-DNZ fits a professional mixer receiving several stereo digital sources because it accepts eight stereo digital-audio inputs and selects one through an integrated 8:2 multiplexer. This can simplify the input stage by replacing several separate receiver paths while retaining support for IEC60958, S/PDIF, EIAJ CP1201, and AES3 transports. The serial digital-audio output can feed the mixer's processing and conversion stages. With support through 192 kHz, the receiver also accommodates high-resolution studio workflows when the source, clocking, and downstream devices operate at the same rate. The 28-pin QFN package saves board area, although its 5 mm by 5 mm footprint requires careful pad layout and thermal-aware assembly.
সুপারিশকৃত
Digital Audio Router
CS8416-DNZ is appropriate for a digital-audio router that must accept more sources than its downstream processing path can consume. Eight stereo inputs can be presented to the system, and the 8:2 multiplexer permits selection of one of those channels for the serial output. This arrangement is useful in studio patch systems, recording installations, and broadcast processing chains where incoming streams use compatible digital-audio standards. Because the receiver can operate in software or hardware control mode, it can support a microcontroller-managed router or a simpler pin-configured design. The 192 kHz capability helps preserve high-resolution sources, while the QFN package keeps the receiver compact for multi-channel equipment.
সুপারিশকৃত
Broadcast Console
The CS8416-DNZ can support a broadcast console receiving stereo digital-audio feeds from studios, effect processors, and transmission equipment. IEC60958 and AES3 compatibility are central to professionally distributed digital audio, while eight stereo inputs provide selection flexibility around a constrained console input bus. The part's 192 kHz maximum sample rate covers high-resolution production paths when supported by the complete signal chain. Software mode is useful when the console controller must configure input routing dynamically, whereas hardware mode can simplify fixed installations. In a dense console, the 28-pin QFN package offers a practical alternative to larger through-hole or leaded packages, provided that assembly and test access are carefully planned.
সুপারিশকৃত
Multichannel Recording System
CS8416-DNZ is suited to multichannel recording equipment that ingests digital-audio streams from external devices and selects a source for the internal processing chain. Eight stereo inputs allow several synchronized or selectable sources to be connected without duplicating the receiver section. Support for S/PDIF, IEC60958, EIAJ CP1201, and AES3 increases compatibility with studio equipment using different digital-audio conventions. The 192 kHz capability is valuable for high-resolution capture workflows, but all devices in the clock and data path must support the selected rate and channel format. The compact QFN construction helps fit the receiver into rack-mount or desktop recording equipment without consuming the area of multiple discrete receiver devices.
সুপারিশকৃত
Surround-Sound Processor
CS8416-DNZ can serve as the digital-audio receiver in a surround-sound processor receiving encoded or discrete digital streams. Eight stereo inputs provide capacity for multiple source selections, such as a primary program feed, alternate source, and auxiliary digital-audio paths. Its serial output and configurable control modes allow the processor to route the selected stream into channel decoding, delay, or conversion circuitry. Support through 192 kHz accommodates high-resolution source material when the processor and downstream DACs are designed for it. The receiver does not itself perform surround decoding, so its role must remain clearly separated from the channel-processing and DAC stages. The small QFN footprint supports compact processor boards without relaxing layout or assembly discipline.
সুপারিশকৃত
Computer Audio Interface
The CS8416-DNZ is relevant to professional computer-audio interfaces that accept multiple digital inputs and present a selected stream to a host or converter section. Its eight stereo inputs can accommodate front-panel, rear-panel, and external source options, while the 8:2 multiplexer consolidates selection into one serial-audio path. Software mode allows a USB controller or embedded processor to configure routing, making the receiver suitable for dynamic desktop and rack interfaces. IEC60958 and AES3 support enables interoperability with professional digital sources. The QFN package suits compact desktop interfaces, but designers should preserve short digital-input routes, provide appropriate termination and coupling according to the datasheet, and verify host-clock requirements before finalizing the board.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা CS8416-DNZ — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য |
|---|---|
| Product Type | Digital audio interface receiver |
| Brand | Cirrus Logic |
| Package | 28-pin QFN (5 mm x 5 mm) |
| Input Channels | 8 stereo inputs |
| Multiplexer Ratio | 8:2 |
| Maximum Sample Rate | 192 kHz |
| Supported Standards | IEC60958, S/PDIF, EIAJ CP1201, AES3 |
| Control Modes | Software mode and hardware mode |
| Output Interface | Serial digital audio |
মূল পার্থক্যসমূহ
- Eight-input digital-audio multiplexing (বনামSingle-channel CS8416-family receiver configurations)
- High-resolution digital-audio support (বনামReceivers limited to 48 kHz or 96 kHz operation)
- Multiple standardized digital-audio interfaces (বনামS/PDIF-only receiver implementations)
- Configurable control architecture (বনামHardware-only configuration)
ডিজাইন নোট
Route each S/PDIF, AES3, or IEC60958 input using the topology recommended in the CS8416 datasheet, including the required input coupling and termination arrangement. Keep these digital-audio traces short, keep the ground reference continuous, and avoid routing them parallel to switching-node paths. The 28-pin QFN footprint also requires correct exposed-pad geometry, so use the manufacturer land-pattern dimensions rather than a generic QFN footprint.
Keep the serial digital-audio output path away from analog clocks, switching regulators, and high-current return paths, and provide a continuous reference plane beneath the route. If the receiver feeds a long cable, test the source-to-receiver channel separately with suitable instrumentation and verify the interconnect standard. Configuration pins and serial-control traces should be kept away from the audio inputs to reduce coupling from control activity.
Do not assume that every CS8416 ordering suffix is interchangeable. The family includes multiple package and grade configurations, while CS8416-DNZ is the 28-pin 5 mm by 5 mm QFN version. Before substituting a family member, compare the exact package drawing, pin-description table, temperature range, supply rating, and control interface. Also confirm that the upstream source and downstream converter support the same sample rate and digital-audio format.
Treat the 192 kHz figure as a maximum supported rate, not a guarantee that every source will operate correctly at that rate. The complete path must support the selected frequency and must share compatible clocking. Validate software-mode initialization, hardware-mode strap settings, channel-status handling, and output format with the system controller before releasing production hardware.
কমপ্লায়েন্স তথ্য
No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statements are included in the product information. The -DNZ ordering code identifies the target configuration, but suffix decoding must not be used to infer an unsupported certification.
