CY8C3445AXA-181 - 50MHz 8051 MCU, 32KB Flash | Infineon
MPN: CY8C3445AXA-181 ✗ জীবনকালের সমাপ্তিCY8C3445AXA-181 সারাংশ
A microcontroller is an embedded-processing semiconductor that integrates a processor core, program memory, data memory, and peripherals into one device. The CY8C3445AXA-181 belongs to the PSoC 3 family and uses an 8051-compatible 8-bit architecture. It sits within the broader hierarchy of microcontroller IC, embedded processor, programmable controller, and system-on-chip. The programmable peripheral architecture allows designers to configure digital and analog functions around a shared CPU rather than relying entirely on fixed-function logic.
The device combines 32 KB of flash for firmware with 4 KB of RAM for working data. Its 50 MHz operating frequency provides the timing headroom expected for embedded control, communications, and general-purpose peripheral-management tasks. The 100-pin TQFP package exposes substantially more I/O than a small microcontroller package, making it suitable for designs requiring multiple external interfaces, control signals, analog resources, or dedicated peripheral connections.
The 1.71 V minimum operating voltage supports low-voltage designs, while the 5.5 V maximum accommodates standard 5 V systems. This range makes the microcontroller relevant to industrial controllers, communication modules, sensor-hub designs, and embedded automation equipment. Its operating-temperature specification of -40 °C to +85 °C covers extended commercial and industrial temperature environments where environmental qualification is important.
Typical application roles include a compact supervisory controller, a communications-enabled control node, a programmable signal-conditioning system, and a peripheral bridge in industrial equipment. The 100-lead package also provides ample physical routing capacity for mixed-signal and embedded-control designs. Firmware, peripheral configuration, clocking, and low-power behavior should be evaluated together because the final power consumption depends on the selected operating mode and enabled peripherals.
PCB implementation requires careful assignment of power, ground, decoupling, clock, programming, and communication signals. Place the required decoupling capacitors close to the power pins, route sensitive clock traces away from high-current switching nodes, and follow the manufacturer’s package and pin-description tables when defining the board footprint. The 14 x 14 mm TQFP package is mechanically larger than compact QFN options, but it provides easier probe access and a high pin count for mixed-signal systems.
This product page organizes the known electrical, memory, environmental, and package characteristics of the CY8C3445AXA-181 together with practical selection guidance and identified drop-in alternatives. Engineers should also review the manufacturer datasheet, device errata, programming guidance, and application notes before releasing a production design or substituting a component with a different ordering code.
এর জন্য ড্রপ-ইন বিকল্প CY8C3445AXA-181 — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই সিরিজের ভ্যারিয়েন্ট
একই সিরিজের মডেল যেগুলো drop-in compatible CY8C3445AXA-181 (একই form factor এবং footprint).
CY8C3445AXE-181
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →CY8C3445AXA-107
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
CY8C3445AXA-181 সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Product Type | 8-bit PSoC 3 CY8C34xx microcontroller |
| Processor Architecture | 8051-compatible 8-bit architecture |
| সর্বোচ্চ ক্লক ফ্রিকোয়েন্সি | 50 MHz |
| Flash Memory | 32 KB (32K x 8) |
| RAM Memory | 4 KB |
| Operating Supply Voltage Range | 1.71 V to 5.5 V |
| অপারেটিং তাপমাত্রার পরিসর | -40 °C to +85 °C |
| Package Type | 100-pin TQFP |
| Package Dimensions | 14 mm x 14 mm |
| মাউন্টিং টাইপ | Surface mount |
| Program Memory Type | Embedded flash |
| Microcontroller Family | PSoC 3 CY8C34xx |
| Core Bit Width | 8 bit |
| Peripheral Type | Programmable PSoC 3 embedded controller |
| RoHS স্ট্যাটাস | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | not_applicable |
CY8C3445AXA-181 14 mm x 14 mm পিন কনফিগারেশন গাইড
CY8C3445AXA-181 (14 mm x 14 mm প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি CY8C3445AXA-181.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
CY8C3445AXA-181 এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Sequence Controller, Sensor Hub and Data Aggregator, Programmable Signal-Control Node, Communication Equipment Controller, Embedded Power-Sequencing Controller, Programmable Logic Controller.
Industrial Sequence Controller
The CY8C3445AXA-181 fits an industrial sequence controller because its 50 MHz 8051-compatible core can execute control and monitoring firmware while the 32 KB flash stores the application program. Its 4 KB RAM provides working space for state variables and communication buffers, and the 100-pin TQFP exposes a broad selection of control and peripheral signals. The specified -40 °C to +85 °C range suits many factory environments when the final enclosure and power system meet the application’s thermal requirements. Validate the actual pin assignments, interrupt resources, and peripheral configuration in the manufacturer datasheet before finalizing the controller architecture.
সুপারিশকৃত
Sensor Hub and Data Aggregator
The CY8C3445AXA-181 can serve as the central controller in a sensor hub that gathers digital measurements, records operating state, and forwards information to a communications interface. Its 4 KB RAM is useful for temporary buffering, while 32 KB flash holds firmware and configuration data. The 100-pin package provides more external connections than a compact controller and can accommodate several sensor inputs and peripheral connections. Designers should confirm the required ADC, timer, serial-interface, and I/O functions against the device configuration tables before committing the pinout.
সুপারিশকৃত
Programmable Signal-Control Node
The PSoC 3 architecture makes the CY8C3445AXA-181 relevant to programmable signal-control nodes where firmware-based sequencing is preferable to a fixed-function controller. Its 50 MHz clock supports timely peripheral coordination, while the 32 KB flash and 4 KB RAM provide separate program and working-memory resources. The 100-pin TQFP offers substantial routing flexibility for mixed-signal systems. Exact analog bandwidth, conversion performance, and configurable peripheral combinations must be selected and reviewed from the manufacturer documentation before assigning sensitive measurement or drive functions.
সুপারিশকৃত
Communication Equipment Controller
The CY8C3445AXA-181 is suitable for a communications-equipment controller that coordinates protocol handling, status monitoring, and local configuration. The 8051-compatible 8-bit core runs at 50 MHz, and the 32 KB flash can retain protocol and application firmware while the 4 KB RAM supports transient packet or message processing. Its wide supply-voltage range supports both low-voltage and 5 V implementations. The exact UART, USB, CAN, or other interface options must be confirmed for the selected device configuration and clocking arrangement before PCB design begins.
সুপারিশকৃত
Embedded Power-Sequencing Controller
The CY8C3445AXA-181 can manage rail sequencing and supervisory functions in a multi-rail embedded system because its programmable digital resources and 50 MHz processing speed support deterministic control logic. The 32 KB flash accommodates sequencing firmware, while the 4 KB RAM stores state and timing variables. The 100-pin package allows connection to enable, fault, reset, and monitoring signals. Actual output-drive ratings, timing tolerances, and available timer resources must be checked in the datasheet, and the controller should not replace hardware protection required for the power stage.
সুপারিশকৃত
Programmable Logic Controller
The CY8C3445AXA-181 is applicable to compact programmable-logic and machine-control functions that require more I/O than a small microcontroller package. Its 50 MHz 8-bit core handles sequential logic, timers, and communication tasks, while 32 KB flash and 4 KB RAM support embedded firmware. The 100-pin TQFP provides a broad perimeter for input modules, output modules, and bus interfaces, and the specified temperature range covers many industrial installations. Firmware must account for debounce, diagnostics, watchdog behavior, and safe-state outputs appropriate to the controlled equipment.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা CY8C3445AXA-181 — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | CY8C3445AXE-181 | CY8C3445AXA-107 |
|---|---|---|---|
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| Package | 100-TQFP (14x14 mm) | 100-TQFP (14x14 mm) | 100-TQFP (14x14 mm) |
| Special Ordering Suffix | AXA-181 | AXE-181 | AXA-107 |
মূল পার্থক্যসমূহ
- High-pin-count PSoC implementation in a standard surface-mount package (বনামCY8C3445AXE-181)
- Substantial memory for embedded firmware and working state (বনামCY8C3445AXA-107)
- Wide operating-voltage envelope (বনামCY8C3445AXE-181)
ডিজাইন নোট
Use the manufacturer package drawing and pin-description table to create the 100-TQFP footprint. Place all required power and ground decoupling capacitors adjacent to their associated pins, keep the return path short, and avoid routing high-current or switching signals beneath sensitive clock and analog inputs. The 14 x 14 mm package provides generous routing space, but disciplined decoupling and partitioning remain necessary to control return-path noise.
Design the supply network for the full 1.71 V to 5.5 V operating range rather than assuming a nominal rail. Confirm local regulator accuracy, startup behavior, load transients, and maximum operating voltage. Add bulk capacitance at the board power entry and local high-frequency decoupling at the device pins. Because the exact peripheral configuration and clock state affect current demand, calculate the power budget using the selected operating mode rather than a single generic current figure.
Review clock-generation requirements before final routing. If an external clock or crystal is used, follow the manufacturer’s recommended topology, loading, and grounding, and keep the clock path away from switching nodes and digital return currents. If the internal clock is used, verify the accuracy requirements of each communication interface. Firmware, clock configuration, and board layout should be considered together when establishing timing margins.
Do not substitute an ordering code solely because the device family and package appear similar. The AXA-181 and AXE-181 parts share major listed characteristics, but their suffix definitions can encode different environmental or qualification requirements. Confirm clock speed, memory capacity, temperature range, supply limits, and package revision in the manufacturer ordering guide. Also validate boot programming, configuration settings, and any errata affecting the chosen device.
কমপ্লায়েন্স তথ্য
No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified for this exact ordering code. The product is an industrial-temperature microcontroller rather than an AEC-Q100 automotive-qualified ordering code.