CY8C3445LTI-093 50MHz 32KB Flash MCU | Infineon
MPN: CY8C3445LTI-093 ✓ সক্রিয়CY8C3445LTI-093 সারাংশ
A microcontroller is the programmable control element of an embedded system. It combines a processor core, program memory, data memory, peripherals, and I/O resources on one integrated circuit. The CY8C3445LTI-093 belongs to the PSoC 3 CY8C34xx family and uses an 8051-compatible architecture. This places it within the broader semiconductor hierarchy of embedded processors, microcontrollers, and programmable control devices.
The principal specifications are a 50 MHz maximum operating frequency, 32 KB of flash program memory, an 8-bit processor architecture, and a 1.71 V to 5.5 V supply range. The flash capacity provides room for a bootloader, application firmware, configuration data, and update logic when the firmware architecture requires these functions. The 48-QFN package also supports compact board layouts while exposing a substantial pin count for mixed-signal, communication, and control connections.
The -093 designation identifies the exact ordering configuration, while LTI indicates the leaded temperature and packaging characteristics associated with this commercial part. Because the device belongs to a mixed-signal microcontroller family, design decisions should cover clocking, reset behavior, programming, exposed-pin connectivity, decoupling, and firmware resource planning rather than treating it as a general-purpose logic controller. Firmware architecture should also account for real-time interrupt latency at the 50 MHz operating limit.
Typical uses include compact consumer controls, industrial sensing nodes, building and access equipment, touch-oriented interfaces, communication modules, and embedded products requiring a dedicated programmable controller. The 1.71 V to 5.5 V range supports systems that operate from low-voltage regulated rails, while the 50 MHz clock and 32 KB flash allocation suit event-driven control loops and moderately structured embedded applications.
Designers should derive decoupling and layout requirements from the manufacturer datasheet before schematic release. Keep the device supply path compact, provide a stable clock arrangement, verify programming access, and confirm exposed-pad connection and thermal requirements against the package drawing. Firmware should include startup, reset-cause handling, peripheral initialization, and fault-safe behavior for field-deployed equipment.
This page consolidates the exact ordering characteristics, package information, operating limits, application guidance, sourcing workflow, and replacement constraints for CY8C3445LTI-093. It also distinguishes verified same-package alternatives from generic microcontrollers that may use a different footprint, pin arrangement, memory map, or peripheral configuration and therefore cannot be treated as drop-in replacements.
এর জন্য ড্রপ-ইন বিকল্প CY8C3445LTI-093 — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই পণ্যের জন্য কোনো ড্রপ-ইন বিকল্প পাওয়া যায়নি।
বিকল্প অনুরোধ করুনCY8C3445LTI-093 সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Product Type | 8-bit Microcontroller |
| Processor Architecture | 8051-compatible |
| CPU Word Size | 8 bit |
| Maximum Operating Frequency | 50 MHz |
| Flash Memory Capacity | 32 KB |
| Flash Memory Organization | 32K x 8 bit |
| Programmable System | PSoC 3 |
| Device Series | CY8C34xx |
| Minimum Operating Supply Voltage | 1.71 V |
| Maximum Operating Supply Voltage | 5.5 V |
| Package Type | 48-QFN |
| Package Pin Count | 48 pins |
| Package Body Length | 7 mm |
| Package Body Width | 7 mm |
| মাউন্টিং টাইপ | Surface mount |
CY8C3445LTI-093 7 mm পিন কনফিগারেশন গাইড
CY8C3445LTI-093 (7 mm প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি CY8C3445LTI-093.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
CY8C3445LTI-093 এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Sensing and Control Nodes, Building and Access Equipment, Communication Interface Modules, Compact Consumer Controls, LED Lighting and Display Control, Battery-Powered Embedded Products.
Industrial Sensing and Control Nodes
The CY8C3445LTI-093 fits compact industrial sensing nodes that combine periodic measurement, local decision logic, and actuator-control signaling. Its 50 MHz maximum operating frequency provides execution headroom for interrupt-driven control routines, while 32 KB of flash accommodates application firmware, configuration, and update-handling code. The 1.71 V to 5.5 V operating range permits use with regulated low-voltage rails used by industrial sensor assemblies. Designers should reserve clean supply routing, stable clocking, and programming access before laying out the 48-QFN footprint. The architecture also suits distributed equipment where a dedicated programmable controller improves timing consistency and reduces reliance on a larger host processor.
Building and Access Equipment
CY8C3445LTI-093 is appropriate for door controls, access terminals, alarm panels, and compact building equipment requiring local logic and multiple peripheral connections. The 48-QFN package provides 48 physical positions for power, control, communications, and signal-routing needs without relying on a large through-hole footprint. Its 8051-compatible PSoC 3 implementation and 32 KB flash support structured embedded firmware, while operation up to 50 MHz helps service time-sensitive keypad, sensor, and indicator tasks. Firmware should include startup sequencing and safe-state behavior. The low-voltage operating range also makes the device suitable for regulated equipment rails, subject to correct decoupling and verified power sequencing.
Communication Interface Modules
The CY8C3445LTI-093 can serve as the embedded controller in a compact communication module, protocol bridge, or command processor when the design targets 8-bit processing and requires dedicated local firmware. Its 50 MHz clock supports responsive protocol handling and interrupt service routines, and 32 KB flash is suitable for drivers, framing logic, configuration, and protocol state machines. The 48-QFN package can simplify dense module layouts, but pin assignment must follow the manufacturer pin description rather than a generic QFN-48 drawing. Interface isolation, signal conditioning, reference clocks, and impedance-controlled connections remain board-level responsibilities. Firmware validation should exercise timeout, retry, and recovery paths under real bus traffic.
Compact Consumer Controls
CY8C3445LTI-093 fits compact household controls, appliance interfaces, and user-input modules where a low-cost dedicated controller replaces a larger mixed-purpose processor. The 8-bit PSoC 3 architecture handles button decoding, status indicators, simple sequencing, and product-specific logic, while 50 MHz operation offers timing margin for responsive control behavior. Its 32 KB flash capacity can hold application code and configuration, and the 1.71 V to 5.5 V range accommodates compatible low-voltage power systems. Layout should minimize switching-node coupling and maintain clean clock and supply paths. Firmware should account for electrostatic-input protection, debounce requirements, brownout behavior, and safe outputs during reset.
LED Lighting and Display Control
The CY8C3445LTI-093 is suitable for LED lighting controllers, status indicators, and compact display-control products when the design needs deterministic embedded sequencing and local command handling. Its 50 MHz operating limit provides capacity for timing loops, dimming updates, fault checks, and communication service routines. The 32 KB flash allocation can support a control application, lookup data, configuration, and field-update logic. The 48-QFN package offers a compact surface-mount option, although exposed-pad construction and thermal conditions must be considered for high-current LED architectures. Separate noisy power paths from signal inputs, use appropriate output-drive design, and confirm all timing and electrical limits directly from the manufacturer documentation.
Battery-Powered Embedded Products
CY8C3445LTI-093 can be used in battery-powered sensing and control products when its 1.71 V to 5.5 V operating range matches the regulated rail. The 8-bit processor and PSoC 3 family provide an efficient platform for product-specific logic without requiring a high-power processor, while the 50 MHz maximum frequency supports responsive event handling when active. Designers should use low-power modes deliberately, disable unused resources, and treat the 32 KB flash allocation as a firmware-budget constraint. Battery chemistry, regulator efficiency, load transients, and low-voltage behavior must be evaluated as a complete power architecture. Firmware should wake from defined sources, preserve state correctly, and avoid unintended activity during idle periods.
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা CY8C3445LTI-093 — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য |
|---|---|
| Manufacturer | Infineon Technologies |
| Package | 48-QFN (7 mm x 7 mm) |
| Processor Architecture | 8051-compatible |
| CPU Width | 8 bit |
| Maximum Frequency | 50 MHz |
| Flash Memory | 32 KB (32K x 8 bit) |
| Operating Voltage Range | 1.71 V to 5.5 V |
| Programmable System | PSoC 3 CY8C34xx |
ডিজাইন নোট
Route the 48-QFN footprint strictly from the manufacturer land pattern and pin-description table. In particular, confirm exposed-pad treatment, thermal-via requirements, and the orientation of pin 1 before artwork release. Keep supply and ground connections short, place decoupling close to the relevant device pins, and separate high-current switching paths from communication and sensing inputs. A mechanically similar 48-pin package is not sufficient evidence that a PCB is pin-compatible.
Design the supply network for the complete operating range of 1.71 V to 5.5 V, including startup transients and peripheral load changes. Confirm which pins require decoupling, how the exposed pad participates in the ground or thermal arrangement, and whether any external components are required by the manufacturer reference schematic. Validate brownout and reset behavior in the finished product rather than assuming the nominal supply range covers every power-state requirement.
Pay particular attention to clock and programming-signal integrity because both can affect field reliability and manufacturing yield. Keep clock routing short and away from switching nodes, use a continuous ground reference beneath signal paths, and follow the programming-interface guidance in the manufacturer documentation. After PCB assembly, verify supply rails, reset release, clock startup, and programming access before allowing the device to enter its normal operating state.
কমপ্লায়েন্স তথ্য
The manufacturer product information in the cited results does not state the requested compliance status for CY8C3445LTI-093. AEC-Q100 is not applicable because the target is not identified as an automotive-qualified variant.