CY8C3665AXA-010 - 67MHz 8051 32KB Flash MCU | Infineon
MPN: CY8C3665AXA-010 ✓ সক্রিয়CY8C3665AXA-010 সারাংশ
A programmable system-on-chip is an integrated semiconductor that combines a microcontroller core, memory, configurable digital peripherals, and configurable analog resources. PSoC devices extend the MCU concept by allowing designers to configure peripheral functions in hardware and software rather than relying only on fixed peripheral blocks. The CY8C36xx family therefore serves as a programmable embedded system-on-chip within the broader microcontroller and embedded semiconductor hierarchy.
The verified distributor listing identifies 32KB of Flash organized as 32K by 8, an 8-bit 8051 architecture, and operation up to 67 MHz. The stated 0.5 V to 5.5 V supply range provides compatibility with low-voltage digital systems, while the 100-pin TQFP package exposes a comparatively large number of external connections for mixed-signal designs. Exact peripheral counts, SRAM capacity, clock configurations, and electrical limits require confirmation in the manufacturer documentation.
Typical implementation areas include embedded control panels, industrial interface modules, data-acquisition equipment, consumer peripherals, and connected products that benefit from programmable analog and digital functions. The 8051-compatible instruction set and integrated peripherals can simplify designs that would otherwise require a discrete MCU plus support ICs. Firmware and peripheral configuration remain design-specific, so the application should be validated against the complete manufacturer documentation before production release.
A primary design consideration is package and pin verification. The available distributor records identify a 100-pin TQFP, while another listing describes a 100-LQFP; engineers must therefore confirm the exact package drawing, exposed-pad treatment, and land pattern before layout or replacement. This page combines verified distributor facts, conservative data markers, replacement analysis, and engineering guidance to distinguish confirmed information from values that still require manufacturer confirmation.
এর জন্য ড্রপ-ইন বিকল্প CY8C3665AXA-010 — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
CY8C3865AXA-018
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
CY8C3665AXI-198
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
CY8C3665AXA-010 সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Product Type | 8-bit 8051-compatible PSoC 3 microcontroller |
| সর্বোচ্চ ক্লক ফ্রিকোয়েন্সি | 67 MHz |
| Flash Memory | 32 KB (32K x 8) |
| Core Architecture | 8-bit 8051 |
| Operating Voltage Range | 0.5 V to 5.5 V |
| প্যাকেজ | 100-TQFP (14 x 14 mm) |
| Programmable Peripheral Type | Configurable analog and digital peripherals |
| Product Family | PSoC 3 CY8C36xx |
| Maximum CPU Clock | 67 MHz |
| Program Memory | 32 KB Flash |
| Data Memory Width | 8 bit |
| Package Pin Count | 100 pins |
| Package Body Size | 14 mm x 14 mm |
| মাউন্টিং টাইপ | Surface mount |
CY8C3665AXA-010 14 mm x 14 mm পিন কনফিগারেশন গাইড
CY8C3665AXA-010 (14 mm x 14 mm প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি CY8C3665AXA-010.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
CY8C3665AXA-010 এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Control Panels, Data Acquisition Modules, Communication Interfaces, Consumer Peripherals, Embedded Sensor Hubs, Programmable Analog Control.
Industrial Control Panels
The CY8C3665AXA-010 fits industrial control-panel designs that need an 8-bit 8051-compatible controller, programmable peripherals, and a 0.5 V to 5.5 V supply range. Its stated 67 MHz maximum clock provides processing headroom for user-interface scanning, state-machine logic, communication handling, and supervisory tasks. The 100-pin TQFP also provides more external connections than a small microcontroller package. Designers should allocate pins among control outputs, sensor inputs, communications, and programming/debug functions, then verify the final muxing against the device documentation. Because the supplied records do not identify exact GPIO or communication peripheral counts, those resources must be confirmed before schematic freeze.
Data Acquisition Modules
The programmable analog and digital resources of the CY8C3665AXA-010 make it a candidate for mixed-signal data-acquisition modules. An engineer can place the MCU between transducers, conditioning circuitry, and a communications interface while using the 8051-compatible core for sampling control, filtering, calibration, and data packaging. The 0.5 V to 5.5 V operating range supports low-voltage signal-chain designs, while 32KB Flash stores firmware and configuration logic. The verified data does not state ADC resolution, sample rate, or SRAM capacity, so those values must be confirmed before selecting it for precision acquisition.
Communication Interfaces
The CY8C3665AXA-010 can serve as the host controller in an embedded communication interface because it combines an 8-bit 8051 core, 32KB Flash, and programmable peripherals in a 100-pin package. Potential uses include protocol conversion, command processing, status reporting, and bridging between a host and industrial equipment. The 67 MHz stated maximum clock can support time-sensitive service routines, but actual protocol throughput depends on the selected peripheral, clock configuration, and firmware architecture. Exact UART, SPI, USB, or CAN capabilities were not provided in the verified snippets and should be checked in the manufacturer documentation before board design.
Consumer Peripherals
For compact consumer accessories, the CY8C3665AXA-010 offers an 8-bit embedded core, 32KB Flash, and configurable peripheral resources that can consolidate control logic into one device. A product such as a smart control accessory, appliance interface, or status controller can use the 0.5 V to 5.5 V range for low-voltage operation and the 100-pin TQFP for external routing flexibility. Designers must still account for power consumption, startup behavior, analog performance, and production programming. Because no verified endurance, temperature, or lifecycle figures were supplied, those qualifications should be obtained before committing the part to a high-volume consumer design.
Embedded Sensor Hubs
The CY8C3665AXA-010 is a candidate for an embedded sensor hub because programmable analog and digital peripherals can support signal conditioning, threshold management, and peripheral control around an 8-bit processor. The MCU can coordinate sensor acquisition, local filtering, calibration, fault reporting, and data transfer while its 32KB Flash stores application firmware. The verified 67 MHz maximum clock provides computational margin for concurrent service tasks, while the 0.5 V to 5.5 V range can simplify integration with low-voltage sensors. Exact converter resolution, comparator behavior, and sensor-interface counts are unavailable in the supplied data and must be verified against the manufacturer documentation.
Programmable Analog Control
The programmable analog capability of the CY8C3665AXA-010 supports control designs in which fixed-function analog behavior may add unnecessary board area. An engineer can evaluate the device for configurable signal paths, thresholding, feedback control, or mixed digital-analog sequencing while retaining an 8051-compatible control core. Its 32KB Flash provides program storage, and the 100-pin package exposes a broad connection set for external sensors and actuators. However, the supplied evidence does not identify op-amp count, DAC resolution, comparator performance, or routing flexibility. Those specifications are decisive for precision analog applications and require direct confirmation before design commitment.
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা CY8C3665AXA-010 — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | CY8C3865AXA-018 | CY8C3665AXI-198 |
|---|---|---|---|
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| Package | 100-TQFP (14 x 14 mm) | 100-TQFP (14 x 14 mm), confirmation required | 100-TQFP (14 x 14 mm), confirmation required |
| Product Family | PSoC 3 CY8C36xx | CY8C36xx family comparison candidate | CY8C36xx family comparison candidate |
মূল পার্থক্যসমূহ
- Documented operating specification (বনামCY8C3865AXA-018)
- Order-code and package data availability (বনামCY8C3665AXI-198)
- Distributor sourcing visibility (বনামCY8C3865AXA-018)
ডিজাইন নোট
Confirm the package suffix and land pattern before PCB release. The primary verified DigiKey listing calls the device a 100-TQFP measuring 14 mm by 14 mm, but another distributor record describes a 100-LQFP. Check the manufacturer package drawing, pin-one orientation, exposed thermal pad requirements, and recommended land pattern. A footprint cannot be safely inferred from the pin count alone.
Design the supply rail within the verified 0.5 V to 5.5 V range while preserving the voltage and sequencing requirements of the selected PSoC configuration. Place local supply and ground-plane connections to minimize loop area, and follow the manufacturer guidance for decoupling and unused pins. Exact voltage tolerances, startup behavior, and current limits require the complete electrical specification.
Do not treat a related CY8C36xx order code as a drop-in replacement solely because the family name matches. The supplied comparison results identify CY8C3865AXA-018 and CY8C3665AXI-198, but do not establish identical pinouts, peripheral routing, clock limits, memory capacity, temperature grades, or package details. Review the datasheets and errata before approving a substitution.
Reserve the programming and debug connections required by the chosen development tool, and route sensitive analog inputs away from fast-switching digital and power-return paths. Because the exact analog and digital peripheral resources are not identified in the supplied data, finalize signal assignment only after reviewing the device pin table, package drawing, and application guidance.
কমপ্লায়েন্স তথ্য
The supplied distributor snippets do not contain product-specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statements. Compliance documentation must be obtained for the exact ordering code.
