EP4CE10F17C9LN - 10,320-Cell FPGA, 179 I/O | Intel | F17
MPN: EP4CE10F17C9LN ✓ সক্রিয়EP4CE10F17C9LN সারাংশ
A field-programmable gate array is a semiconductor whose digital logic and interconnect resources are configured after fabrication. Within the product hierarchy, an FPGA is a programmable logic device, while the Cyclone IV E family combines configurable logic, memory, and general-purpose I/O in one device. This makes the EP4CE10F17C9LN suitable when a design needs flexible hardware behavior, rapid board revisions, or parallel processing that would be costly to implement with fixed-function logic.
The device provides 10,320 logic cells, 179 I/O, and 423,936 bits of RAM-like embedded memory. Its 60 nm process technology supports a compact, power-conscious implementation compared with larger programmable-logic families. The 256-pin FBGA package also exposes substantially more interface options than a small leaded package, making it practical for parallel data acquisition, multiple serial links, external memory interfaces, and general-purpose control logic.
The C9 ordering suffix identifies this exact commercial configuration within the EP4CE10 F17 family. Its pin count, package family, and device density support direct PCB footprint planning, while the actual pin assignments depend on the Quartus design and the device pin-connection tables. Engineers should confirm speed grade, temperature grade, supported I/O standards, bank voltage restrictions, configuration scheme, and power requirements against the Cyclone IV E device datasheet before releasing a production board.
Typical uses include industrial control modules, programmable logic controllers, data-acquisition equipment, communications gateways, embedded vision, and general-purpose digital signal-processing systems. The device is particularly useful where parallel logic, multiple external interfaces, and configuration flexibility are required within a modest logic-cell budget.
PCB design should preserve the manufacturer's recommended power and ground-plane arrangement, place decoupling capacitors close to supply pins, and route sensitive or high-speed signals with controlled impedance. Configuration signals must also follow the documented startup procedure so that the FPGA reaches a valid operating state reliably.
This product page combines the exact ordering information, package and density characteristics, practical application guidance, order-code alternatives, and PCB-focused design notes to support faster component selection and design review.
এর জন্য ড্রপ-ইন বিকল্প EP4CE10F17C9LN — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই সিরিজের ভ্যারিয়েন্ট
একই সিরিজের মডেল যেগুলো drop-in compatible EP4CE10F17C9LN (একই form factor এবং footprint) — পার্থক্য রয়েছে Package, Device Type, Mounting Type, Process Technology, Embedded Memory.
EP4CE10F17C8N
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →EP4CE10F17C8LN
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →EP4CE10F17C8L
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →EP4CE10F17C9L
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →EP4CE10F17I7N
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →EP4CE10F17C9LN সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Device Type | Field-Programmable Gate Array (FPGA) |
| FPGA Family | Cyclone IV E |
| Logic Cells | 10,320 cells |
| Logic Blocks | 47 blocks |
| Embedded Memory | 423,936 bits |
| User I/O | 179 I/O |
| Process Technology | 60 nm |
| Core Supply Voltage | 1.2 V |
| প্যাকেজ | 256-pin FBGA |
| Package Family | FBGA-256 |
| মাউন্টিং টাইপ | Surface mount |
| Device Variant | EP4CE10, F17 package configuration |
| Ordering Part Number | EP4CE10F17C9LN |
EP4CE10F17C9LN fbga-256 পিন কনফিগারেশন গাইড
EP4CE10F17C9LN (fbga-256 প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি EP4CE10F17C9LN.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
EP4CE10F17C9LN এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Automation Controller, Data-Acquisition System, Communications Gateway, Programmable Logic Controller, Embedded Vision Preprocessor, Programmable Interface Bridge.
Industrial Automation Controller
The EP4CE10F17C9LN fits industrial automation controllers that require deterministic programmable logic alongside numerous field interfaces. Its 10,320 logic cells can implement sequencing, interlocks, protocol state machines, and machine-control functions, while 179 I/O provide connections for sensors, actuators, encoders, and communications transceivers. The 256-pin FBGA package supports routing to external memory and multiple buses without relying on a large leaded package. Designers should partition I/O into voltage-compatible banks, apply the manufacturer’s power and ground recommendations, and verify the C9 grade’s temperature and lifecycle suitability for the target equipment class.
সুপারিশকৃত
Data-Acquisition System
The EP4CE10F17C9LN is suitable for parallel data-acquisition systems where multiple sensor channels, counters, filters, and data-transfer logic must operate concurrently. The 179 user I/O provide substantial parallel connectivity, and the 423,936 bits of embedded memory can buffer samples or hold timing and control functions. In such designs, the FPGA can aggregate multiple channels, implement digital filtering, and transfer processed data through external interfaces. Signal-integrity performance depends on the selected I/O standard, bank voltage, board topology, and timing constraints, all of which should be established from the official device documentation.
সুপারিশকৃত
Communications Gateway
The EP4CE10F17C9LN can support communications gateways that combine protocol conversion, packet buffering, and control logic in one programmable device. Its 10,320 logic cells are appropriate for multiple moderate-complexity protocol engines, while 423,936 bits of embedded memory support buffering and state management. The 179 I/O allow connection to network PHYs, serial transceivers, control processors, and status interfaces. For production designs, engineers should confirm supported high-speed I/O standards, allowable input and output rates, configuration method, and power sequencing in the Cyclone IV E device documentation.
সুপারিশকৃত
Programmable Logic Controller
The EP4CE10F17C9LN is well suited to compact PLC and machine-control platforms that need flexible logic, event timing, and extensive I/O. Its programmable architecture allows control sequences, alarm logic, counters, and communication handling to be consolidated in one device, reducing discrete component count and simplifying product revisions. The 179 I/O make it possible to connect discrete inputs, outputs, encoders, and communications links, while the 256-pin FBGA supports dense multilayer routing. The final design should verify I/O bank restrictions, configuration reliability, thermal performance, and whether the specified ordering grade matches the product’s environmental requirements.
সুপারিশকৃত
Embedded Vision Preprocessor
The EP4CE10F17C9LN can serve as a preprocessor in embedded vision systems where sensor data must be captured, synchronized, filtered, and reduced before transmission. Its 10,320 logic cells support pipeline control and moderate image-processing functions, while 423,936 bits of embedded memory provide local line buffers or feature storage. The 179 I/O allow parallel connection to image sensors, capture devices, and downstream processors. Actual throughput and I/O rate must be selected only from supported device standards, and PCB routing should account for clock jitter, supply noise, impedance control, and the FBGA package’s thermal behavior.
সুপারিশকৃত
Programmable Interface Bridge
The EP4CE10F17C9LN is effective for interface bridges that translate between dissimilar parallel, serial, memory, or control interfaces. Its programmable logic can implement width converters, timing controllers, command translators, and buffering, while 179 I/O provide enough external connectivity for moderately complex bridge functions. The 423,936-bit embedded memory can support temporary data storage and protocol state. Because FPGA bridges depend on exact timing constraints and I/O standards, designers should use the manufacturer’s pin tables and timing documentation, preserve recommended power distribution, and verify every voltage domain before authorizing a footprint-compatible order-code substitution.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা EP4CE10F17C9LN — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | EP4CE10F17C8N | EP4CE10F17C8LN | EP4CE10F17C8L | EP4CE10F17C9L | EP4CE10F17I7N |
|---|---|---|---|---|---|---|
| Package | 256-pin FBGA | 256-pin FBGA | 256-pin FBGA | 256-pin FBGA | 256-pin FBGA | 256-pin FBGA |
| Brand | Intel | Intel | Intel | Intel | Intel | Intel |
| FPGA Family | Cyclone IV E | Cyclone IV E | Cyclone IV E | Cyclone IV E | Cyclone IV E | Cyclone IV E |
| Logic Cells | 10,320 cells | 10,320 cells | 10,320 cells | 10,320 cells | 10,320 cells | 10,320 cells |
| User I/O | 179 I/O | 179 I/O | 179 I/O | 179 I/O | 179 I/O | 179 I/O |
| Process Technology | 60 nm | 60 nm | 60 nm | 60 nm | 60 nm | 60 nm |
| Core Supply Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
| Ordering Suffix | C9LN | C8N | C8LN | C8L | C9L | I7N |
মূল পার্থক্যসমূহ
- Directly identifies the complete EP4CE10 F17 ordering configuration (বনামEP4CE10F17C8N)
- Closest same-footprint order-code match (বনামEP4CE10F17C9L)
- Maintains the complete 179-I/O interface budget (বনামEP4CE10F17I7N)
ডিজাইন নোট
Follow the manufacturer’s FBGA-256 land pattern and ball-assignment table exactly; do not derive pad locations from a generic BGA drawing. Place all required bypass capacitors close to their associated core and I/O supply balls, then provide continuous ground planes with careful partitioning of potentially noisy I/O returns. Route configuration pins away from high-speed data paths and keep test access available so board-level configuration failures can be diagnosed.
Design the 1.2 V core rail and associated I/O supplies independently, following the voltage, current, sequencing, and tolerance requirements in the Cyclone IV E device datasheet. Check worst-case static and switching power rather than relying on typical values. Confirm that each external interface’s voltage level is supported by the assigned I/O bank, and use dedicated filtering or regulation where a noisy external supply feeds sensitive logic.
Use the Quartus-generated constraints and timing analysis to define clock periods, skew, input delay, output delay, and false-path exceptions. Maintain continuous reference planes beneath high-speed routes, minimize stubs, and use controlled-impedance routing for external interfaces. The 179 available I/O do not imply that every interface can operate at the same speed, because device pin placement, bank voltage, and supported I/O standards constrain usable combinations.
Do not assume that an EP4CE10 order-code suffix can be changed solely because the package drawing matches. Verify speed, temperature, qualification, commercial status, moisture level, and ordering-code attributes for every proposed substitute. Also distinguish the 47 logic-block count from the 10,320 total logic-cell count, and do not infer I/O function from the 179-pin count without consulting the pin-connection table for the selected configuration.
কমপ্লায়েন্স তথ্য
The manufacturer product and comparison listings identify the family and package, but no explicit RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification declaration is included for this ordering part number.