EP4CE15E22C6N - 15,408-Cell Cyclone IV E FPGA | Intel
MPN: EP4CE15E22C6N ✓ সক্রিয়EP4CE15E22C6N সারাংশ
A field-programmable gate array is a semiconductor whose digital logic, interconnect, and I/O behavior are configured after manufacture. An FPGA belongs to the programmable-logic hierarchy, alongside CPLDs, and provides a higher level of parallelism than a fixed-function logic IC. This makes the EP4CE15E22C6N suitable for control logic, interface conditioning, signal processing, protocol bridging, and embedded test systems where deterministic hardware timing is valuable.
The device provides 15,408 logic cells organized into 963 CLBs, together with 81 I/O in a 144-pin package. Its listed maximum frequency is 472.5 MHz, making it suitable for moderately clocked control, acquisition, and communication designs. The E22 designation identifies the device configuration associated with this ordering part number, while the C6 suffix identifies the particular speed and temperature grade encoded by the manufacturer ordering code.
The exposed-pad EQFP construction provides a direct thermal path from the FPGA to the PCB. Thermal performance still depends on the size and conductivity of the copper beneath and around the exposed pad, as well as the airflow and ambient conditions. Decoupling, routing, and clock distribution remain central design concerns because the device combines numerous programmable logic resources with a large pin count.
Typical applications include industrial control and automation, embedded instrumentation, communication interfaces, general-purpose digital signal processing, and FPGA-based educational or prototyping systems. Its combination of logic capacity, I/O availability, and a 472.5 MHz listed maximum frequency supports designs that require parallel datapaths, flexible protocol handling, or hardware-assisted decision logic.
For a new board, use the manufacturer pin-assignment and power-supply guidance when defining the footprint and plane connections. Treat the exposed pad as both a thermal feature and a PCB-layout feature, and validate every configuration, I/O standard, and timing constraint against the device documentation before fabrication.
This product record combines the exact ordering-code attributes, package information, I/O count, logic resources, and frequency data into an engineering-focused reference. It also identifies pin-compatible alternatives, highlights qualification questions, and provides practical guidance for thermal management, decoupling, and design-in validation.
এর জন্য ড্রপ-ইন বিকল্প EP4CE15E22C6N — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই সিরিজের ভ্যারিয়েন্ট
একই সিরিজের মডেল যেগুলো drop-in compatible EP4CE15E22C6N (একই form factor এবং footprint) — পার্থক্য রয়েছে Package, Speed Grade.
EP4CE15E22C7N
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →EP4CE15E22C8N
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →EP4CE15E22I7N
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
EP4CE10E22A7N
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →EP4CE10E22I7N
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
EP4CE15E22C6N সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Device Type | Cyclone IV E field-programmable gate array |
| Logic Cells | 15,408 cells |
| Configurable Logic Blocks | 963 CLBs |
| Maximum Operating Frequency | 472.5 MHz |
| I/O Count | 81 I/O |
| Total Pin Count | 144 pins |
| সাপ্লাই ভোল্টেজ | 1.2 V |
| প্যাকেজ | 144-pin EQFP exposed-pad package |
| Package Body Size | 22 x 22 mm |
| Lead Pitch | 0.50 mm |
| মাউন্টিং টাইপ | Surface mount |
| Lead-Free Status | Lead-free |
| Delivery Packaging | Tray |
| Logic Blocks Listed in Secondary Specification | 47 logic blocks |
| Logic Elements Listed in Secondary Specification | 51,609 logic elements |
EP4CE15E22C6N 22 x 22 mm পিন কনফিগারেশন গাইড
EP4CE15E22C6N (22 x 22 mm প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি EP4CE15E22C6N.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
EP4CE15E22C6N এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Control and Automation, Communication Interface and Protocol Bridging, Signal Processing and Instrumentation, Data Acquisition and Test Equipment, Embedded Networking and Edge Gateways, Education, Prototyping, and Programmable Logic.
Industrial Control and Automation
The EP4CE15E22C6N fits industrial control logic that coordinates sensors, actuators, interlocks, and machine timing. Its 15,408 logic cells and 963 configurable logic blocks provide parallel hardware for state machines, protocol handling, and safety interlocks, while 81 I/O support board-level connections. The 472.5 MHz listed maximum frequency is useful for deterministic control pipelines. Design the implementation around the exact C6 grade, 1.2 V core supply, 144-pin exposed-pad footprint, and manufacturer-specified I/O standards. Validate timing margin, operating-temperature requirements, and industrial qualification before deployment.
সুপারিশকৃত
Communication Interface and Protocol Bridging
The EP4CE15E22C6N is suitable for parallel protocol conversion, frame assembly, buffering, and interface isolation between systems operating at different clock rates. Its 15,408 logic cells can support multiple concurrent channels, and the 472.5 MHz listed maximum frequency provides substantial timing margin for synchronous datapaths. The 81 available I/O are useful for legacy parallel buses and control signals. Because the device has 144 physical pins, PCB planning must account for the exposed-pad thermal connection and all required power rails. Timing closure should use the C6 device speed grade and the selected I/O standards.
সুপারিশকৃত
Signal Processing and Instrumentation
The EP4CE15E22C6N can implement parallel digital filtering, correlation, sampling-path control, timing generation, and acquisition instrumentation. Its 963 configurable logic blocks and 15,408 logic cells allow several fixed-point datapaths to operate concurrently, while the listed 472.5 MHz maximum frequency supports demanding synchronous processing. The FPGA can also coordinate multiple converters through its 81 I/O. Use the exact C6 timing constraints and I/O voltage standards during implementation, and account for clock jitter, converter latency, and deterministic routing. A controlled PCB layout is particularly important when analog, digital, and clocking functions share the same board.
সুপারিশকৃত
Data Acquisition and Test Equipment
The EP4CE15E22C6N is well suited to FPGA-based acquisition, pattern generation, and automated test systems because 15,408 logic cells can run parallel channel logic and the 81 I/O simplify interface with external converters, memories, and test fixtures. Its 472.5 MHz listed maximum frequency supports high-rate sampling control and timing generation. Designers should partition timing-critical paths, constrain clocks and I/O standards, and reserve logic for calibration and data movement. The 144-pin exposed-pad package requires a thermal-aware land pattern and adequate copper around the device to avoid performance shifts from elevated junction temperature.
সুপারিশকৃত
Embedded Networking and Edge Gateways
The EP4CE15E22C6N can handle packet formatting, buffering, concurrency control, and hardware-assisted protocol processing in embedded network equipment. The 963 configurable logic blocks allow parallel packet-level operations, while 81 I/O support local data buses and control interfaces. Its 472.5 MHz listed frequency is suitable for moderately high-rate line-rate processing when the selected design meets timing closure. The 1.2 V core rail and 144-pin exposed-pad package demand careful power-plane and thermal design. Firmware and logic should be divided so that configuration access, diagnostics, and network traffic do not interfere with critical timing paths.
সুপারিশকৃত
Education, Prototyping, and Programmable Logic
The EP4CE15E22C6N provides enough programmable logic for instructional processors, interface experiments, digital design projects, and portable prototyping systems. With 15,408 logic cells, 963 configurable logic blocks, and 81 I/O, it allows students or engineers to combine soft processors, counters, state machines, and memory interfaces in one design. The 472.5 MHz listed maximum frequency provides a useful performance ceiling for timing exercises. Developers should start with a simple pin-constrained design, add clocking and reset structure early, and reserve logic for debugging. The exposed-pad footprint and required 1.2 V supply should be reproduced exactly from the manufacturer package and power guidance.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা EP4CE15E22C6N — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | EP4CE15E22C7N | EP4CE15E22C8N | EP4CE15E22I7N | EP4CE10E22A7N | EP4CE10E22I7N |
|---|---|---|---|---|---|---|
| Brand | Intel | Intel | Intel | Intel | Intel | Intel |
| Package | 144-pin EQFP exposed-pad package | 144-pin EQFP exposed-pad package - same | 144-pin EQFP exposed-pad package - same | 144-pin EQFP exposed-pad package - same | 144-pin EQFP exposed-pad package - same | 144-pin EQFP exposed-pad package - same |
| Device Family | Cyclone IV E | Cyclone IV E | Cyclone IV E | Cyclone IV E | Cyclone IV E | Cyclone IV E |
| Supply Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
| Package Body Size | 22 x 22 mm | 22 x 22 mm | 22 x 22 mm | 22 x 22 mm | 22 x 22 mm | 22 x 22 mm |
| Lead Pitch | 0.50 mm | 0.50 mm | 0.50 mm | 0.50 mm | 0.50 mm | 0.50 mm |
| Ordering Grade Suffix | C6 | C7 | C8 | I7 | A7 | I7 |
মূল পার্থক্যসমূহ
- Direct E22 package compatibility (বনামEP4CE15E22C7N)
- Native 15,408-cell EP4CE15 resource class (বনামEP4CE10E22A7N)
- Three-speed-grade alternatives in the same footprint (বনামEP4CE15E22C8N)
- 81 I/O with a listed 472.5 MHz maximum frequency (বনামEP4CE15E22I7N)
ডিজাইন নোট
Treat the exposed pad as a mandatory thermal and electrical feature of the 144-pin EQFP footprint. Connect it according to the manufacturer power architecture and use a generous, uninterrupted copper region beneath the device with multiple thermal vias where permitted. Keep heat-generating components away from the pad, preserve airflow over the package, and verify that the final PCB stack-up and enclosure meet the device's junction-temperature limit. Package size alone does not establish acceptable operating temperature.
Implement the supply network from the manufacturer power-guidance schematic rather than copying a generic 144-pin footprint. Place the required bulk and high-frequency decoupling capacitors at the associated package pins, keep the 1.2 V core rail and auxiliary rails on compatible layers, and minimize loop area between each capacitor and the device. Confirm the exposed-pad connection, solder-mask definition, paste pattern, and package tolerances against the official land-pattern drawing before releasing artwork.
Reserve the FPGA's clock inputs and configuration pins according to the ordering-specific pin table, and establish the board-level clock topology before assigning arbitrary user I/O. Keep sensitive or high-speed routing short, provide return paths, and separate clocks from high-current switching nodes. Because the package contains 144 pins, use the manufacturer pin table to avoid misreading exposed-pad-related numbering or assigning power-bank pins as ordinary user I/O.
Do not treat EP4CE15E22C6N, EP4CE15E22C7N, and EP4CE15E22C8N as interchangeable solely because the package is identical. The C6, C7, and C8 suffixes encode different ordering grades. Before substitution, confirm the required speed grade, temperature grade, qualification target, lifecycle status, and timing margin. Likewise, do not approve an EP4CE10-based alternative without checking that the lower logic capacity still satisfies the complete design and that the bitstream and timing constraints remain valid.
কমপ্লায়েন্স তথ্য
The component listing identifies EP4CE15E22C6N as lead-free. RoHS, REACH, halogen-free, conflict-minerals, and automotive-qualification status were not established for the exact ordering part number.
