Renesas Electronics

ISL8488EIB - ESD-Protected RS-485/RS-422 | Renesas

MPN: ISL8488EIB ✓ সক্রিয়
4.5 V to 5.5 V Vdss 8-pin SOIC Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

ISL8488EIB সারাংশ

The Renesas Electronics ISL8488EIB is a single-channel, half-duplex RS-485/RS-422 interface transceiver built with BiCMOS technology and operated from a single 5 V supply. It accepts a 4.5 V to 5.5 V supply range and provides one driver and one receiver in an 8-pin SOIC package. Driver outputs and receiver inputs are protected against ESD strikes up to ±15 kV without latch-up.

An RS-485/RS-422 transceiver is an interface IC that converts logic-level signals into balanced differential signals for reliable communication over cables and board-level interconnects. The ISL8488EIB belongs to the broader hierarchy of transceiver IC, interface IC, communication IC, and semiconductor. Its differential signaling supports noise rejection, while its integrated ESD protection helps preserve interface reliability in industrial and commercial systems where exposed connector pins may encounter electrostatic discharge.

The device provides full RS-422 and RS-485 operation from a single 5 V rail. Its 10% supply tolerance allows operation across the 4.5 V to 5.5 V range rather than requiring a tightly regulated 5 V source. The integrated protection applies to both driver outputs and receiver inputs, and the BiCMOS process combines low-power CMOS characteristics with bipolar drive capability. These features make the device suitable for robust point-to-point and multidrop balanced communication links.

As a single transceiver, the ISL8488EIB is appropriate when a system requires one differential bus driver and one differential receiver rather than a multi-channel interface. The SOIC-8 package supports conventional surface-mount assembly and occupies a footprint compatible with established RS-485 interface layouts. Because a transceiver combines transmit and receive functions, system design must include correct driver enable control, bus termination, fail-safe biasing, grounding, and protection arrangements appropriate to the cable environment.

Typical uses include industrial serial links, building-control equipment, factory automation, instrumentation, data acquisition, and embedded communications between circuit boards. The device can also serve in RS-422 links where a dedicated balanced driver and receiver are required. Its principal design considerations are correct logic-level interfacing, controlled bus-idle states, proper termination at the physical ends of the network, and protection of long exposed cables.

For reliable operation, decouple the 5 V supply close to the device and route the balanced differential pair as a tightly coupled pair. Place termination resistors only at the physical ends of the bus, and use the receiver-enable and driver-enable controls to prevent multiple transmitters from driving the same network simultaneously. Confirm the final termination, biasing, and cable-length configuration against the communication standard used by the system.

This page combines the manufacturer interface description, package information, protection characteristics, verified replacement references, and practical RS-485/RS-422 design guidance. It also distinguishes direct drop-in replacements from packaging-only variants, helping engineers evaluate PCB reuse, electrical compatibility, and sourcing requirements before modifying a qualified design.

এর জন্য ড্রপ-ইন বিকল্প ISL8488EIB — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible ISL8488EIB (একই form factor এবং footprint) — পার্থক্য রয়েছে ESD Protection, Package.

Renesas Electronics
ESD Protection: 15 kV
Package: 14-pin SOIC
এর সাথে তুলনা করুন ISL8488EIB →

ISL8488EIBZA

✅ ড্রপ-ইন
📦 8-pin SOIC
Same 8-pin SOIC footprint, 4.5 V to 5.5 V supply class, and 250 kbps interface rating; ordering suffix differs.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

ISL8488EIB-T

✅ ড্রপ-ইন
📦 8-pin SOIC
Same 8-pin SOIC footprint and RS-485/RS-422 interface class; packaging suffix differs by 0 in electrical performance.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

ISL8488EIBZA-T

✅ ড্রপ-ইন
📦 8-pin SOIC
Same 8-pin SOIC footprint and 4.5 V to 5.5 V supply class; 250 kbps interface rating and ordering suffix differ.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

ISL8489EIB

✅ ড্রপ-ইন
Renesas Electronics
📦 8-pin SOIC
RS-422/RS-485 transceiver · 5 V · 4.5 V to 5.5 V · 250 kbps · 1 · 1 · Full duplex · RS-422 and RS-485

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

ISL8490EIB

✅ ড্রপ-ইন
📦 8-pin SOIC
Same-brand RS-485/RS-422 family in an 8-pin SOIC with a 4.5 V to 5.5 V supply class; functional control differences require schematic review.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

ISL8488EIB বিশেষণ

Transceiver Count 1
Driver Count 1
Receiver Count 1
Communication Standard RS-422 and RS-485
Transceiver Configuration Full RS-422/RS-485 single transceiver
Supply Voltage Range 4.5 V to 5.5 V
Nominal Supply Voltage 5 V
Process Technology BiCMOS
ESD Protection ±15 kV on driver outputs and receiver inputs
Latch-Up Protection Yes
প্যাকেজ 8-pin SOIC
মাউন্টিং টাইপ Surface mount

ISL8488EIB 8-pin soic পিন কনফিগারেশন গাইড

ISL8488EIB (8-pin soic প্যাকেজ)-এর পিন কনফিগারেশন। পিন নম্বরিং, ফাংশন এবং সংযোগ ডায়াগ্রাম প্রস্তুতকারকের ডেটাশিটে সংজ্ঞায়িত করা আছে। সঠিক ফুটপ্রিন্ট এবং সোল্ডারিং নির্দেশিকার জন্য এটি দেখুন।

ISL8488EIB-এর জন্য 8-pin soic প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি ISL8488EIB.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

ISL8488EIB এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial RS-485 Control Links, RS-422 Point-to-Point Communication, Building Control Equipment, Factory Automation and Robotics, Instrumentation and Data Acquisition, Embedded Board-to-Board Serial Links.

🏭

Industrial RS-485 Control Links

The ISL8488EIB fits industrial control links that require one balanced transmitter and one balanced receiver on a 5 V rail. Its 4.5 V to 5.5 V operating range accommodates standard 5 V supply variation, while ±15 kV ESD protection on driver outputs and receiver inputs improves robustness at connector-facing pins. Place the transceiver near the cable interface, decouple the 5 V supply locally, and use a termination resistor only at the physical end of the RS-485 bus. The design should also prevent two enabled drivers from simultaneously driving the bus.

🌐

RS-422 Point-to-Point Communication

The ISL8488EIB is suitable for point-to-point RS-422 links where noise rejection and predictable differential signaling are important. The device combines a differential driver and differential receiver in one 8-pin SOIC, reducing the number of interface components compared with separate driver and receiver packages. Its BiCMOS implementation operates from a 4.5 V to 5.5 V supply, and ±15 kV ESD protection covers both sides of the balanced interface. Route the differential pair as a coupled pair, provide a solid ground reference, and validate termination and enable timing in the complete system.

🧩

Building Control Equipment

The ISL8488EIB can form the balanced communication boundary in building-control equipment such as controllers, sensor interfaces, and remote I/O modules. Its single 5 V supply simplifies integration with digital control logic, while the 10% supply tolerance supports 4.5 V to 5.5 V rails. Integrated ±15 kV ESD protection is particularly relevant where the transceiver connects through an accessible field connector. Maintain a continuous ground path, isolate external cable transients with appropriately rated surge protection, and check the operating-temperature grade before using the device in heating or cooling equipment.

🏭

Factory Automation and Robotics

The ISL8488EIB is appropriate for automation modules that communicate with remote drives, sensors, or actuators over balanced RS-485 wiring. ESD protection up to ±15 kV adds interface ruggedness, but it does not replace industrial surge and lightning protection for long cables. Keep the transceiver and connector path physically close, provide low-impedance return routing, and use the receiver and driver enables to establish a safe bus-idle state. Firmware and circuitry must ensure that no two nodes transmit simultaneously, because multiple active drivers can create high current and unreliable bus contention.

🔧

Instrumentation and Data Acquisition

The ISL8488EIB supports isolated-enough or locally referenced instrumentation links when the system requires differential signal transmission over a cable between circuit boards or instruments. The receiver and driver operate from one 4.5 V to 5.5 V rail, and ESD protection is applied directly to the communication pins. Keep analog and digital return currents separated where practical, terminate the cable according to its loss characteristics, and confirm that the interface ground does not introduce hazardous potential differences. For installations spanning large ground-potential ranges, add an appropriate galvanic isolation barrier.

🖥️

Embedded Board-to-Board Serial Links

The ISL8488EIB can be used for balanced board-to-board communication when long internal wiring or coupling between assemblies makes single-ended signaling less dependable. Its single-driver, single-receiver arrangement is efficient for compact embedded systems, while the 8-pin SOIC package simplifies conventional surface-mount assembly. A local bypass capacitor should be placed close to the supply pin, and the balanced traces should remain adjacent with an uninterrupted ground reference. If the two boards can have different ground potentials, verify whether isolation is required rather than relying only on differential signaling.

সুপারিশকৃত পণ্যের সারসংক্ষেপ

ISL8488EIBZA Pin-compatible 8-pin SOIC transceiver option ব্যবহৃত হয়: Industrial RS-485 Control Links, Instrumentation and Data Acquisition, Embedded Board-to-Board Serial Links ISL8489EIB Renesas Electronics ব্যবহৃত হয়: Industrial RS-485 Control Links, Factory Automation and Robotics ISL8488EIB-T Same-package transceiver option for interface redesign ব্যবহৃত হয়: RS-422 Point-to-Point Communication, Instrumentation and Data Acquisition ISL8491EIB Renesas Electronics ব্যবহৃত হয়: RS-422 Point-to-Point Communication, Embedded Board-to-Board Serial Links ISL8488EIBZA-T Pin-compatible 8-pin SOIC transceiver option ব্যবহৃত হয়: Building Control Equipment ISL8488EIB Renesas Electronics ব্যবহৃত হয়: Building Control Equipment ISL8490EIB Related Renesas single-transceiver family member ব্যবহৃত হয়: Factory Automation and Robotics
What is the ISL8488EIB?
The ISL8488EIB is a Renesas Electronics single-channel, half-duplex RS-485/RS-422 interface transceiver with one driver and one receiver. According to the manufacturer datasheet, it uses BiCMOS technology, operates from a 5 V supply, and is packaged in an 8-pin SOIC. It provides balanced communication for industrial and embedded serial-data links.
What is the operating voltage of ISL8488EIB?
The ISL8488EIB operates from a single 4.5 V to 5.5 V supply. According to the Renesas Electronics datasheet, this range provides 10% tolerance around the nominal 5 V rail. The supply must therefore remain within 4.5 V to 5.5 V during operation, while appropriate local decoupling should be used to control high-frequency supply noise.
What ESD protection does ISL8488EIB provide?
The ISL8488EIB provides ±15 kV ESD protection on both driver outputs and receiver inputs. According to the manufacturer datasheet, the protected lines are designed to withstand electrostatic discharge without latch-up. Protection rating does not eliminate the need for good grounding, controlled connector design, and system-level surge protection on long cable interfaces.
Where can I download the ISL8488EIB datasheet PDF?
The ISL8488EIB datasheet is available from the Renesas Electronics document page for the ISL8488E, ISL8489E, ISL8490E, and ISL8491E family. The document covers the shared BiCMOS architecture, 4.5 V to 5.5 V supply range, ±15 kV ESD protection, RS-422/RS-485 operation, and the electrical characteristics of the family.
Where can I find the ISL8488EIB pinout?
The ISL8488EIB pinout is shown in the manufacturer datasheet for the ISL8488E, ISL8489E, ISL8490E, and ISL8491E family. The component is an 8-pin SOIC device. Use the pin-description table and package drawing in that document when assigning driver, receiver, enable, ground, and supply connections on a new PCB.
What are the key specifications of ISL8488EIB that engineers should know?
The principal ISL8488EIB specifications are one driver, one receiver, RS-422 and RS-485 operation, a 4.5 V to 5.5 V supply range, BiCMOS construction, ±15 kV ESD protection on driver outputs and receiver inputs, and an 8-pin SOIC package. According to the manufacturer datasheet, the device also includes latch-up protection on its exposed communication lines.
ISL8488EIB vs ISL8488EIBZA - which is the drop-in replacement?
The ISL8488EIBZA is identified as a complete replacement for the ISL8488EIB because both use an 8-pin SOIC package and have consistent terminal and performance characteristics. A replacement should still be checked for ordering suffix, temperature, packaging, and production-status requirements. The verified comparison identifies a 250 kbps SOIC-8 implementation with a 4.5 V to 5.5 V supply.
Can ISL8488EIBZA replace ISL8488EIB?
Yes, the ISL8488EIBZA is a verified pin-compatible replacement for the ISL8488EIB. The cross-reference identifies consistent terminals, package, and functional characteristics, with no PCB modification required. The quoted replacement is an 8-pin SOIC, 250 kbps device operating from a 4.5 V to 5.5 V supply. Confirm the exact ordering suffix before production release.
What is the best drop-in replacement for ISL8488EIB?
The ISL8488EIBZA is the clearest direct replacement identified for the ISL8488EIB because it retains the 8-pin SOIC footprint and is described as a complete replacement with consistent terminals and characteristics. The ISL8488EIB-T also appears in a direct comparison with the target and retains the same 8-pin SOIC format, but its shipping format must be checked before substitution.
What can replace ISL8488EIB?
The ISL8488EIBZA can replace the ISL8488EIB directly in an 8-pin SOIC footprint, according to the verified cross-reference. The ISL8488EIB-T is also presented as a complete replacement in a separate comparison. Neither option should be considered an unconditional substitute until package orientation, temperature grade, shipping format, and production requirements have been confirmed.
When should I choose ISL8488EIB over ISL8488EIBZA?
Choose the original ISL8488EIB when its exact ordering suffix is already qualified in your BOM, approved supplier process, or existing PCB documentation. Choose the ISL8488EIBZA when you need a verified direct replacement with the same 8-pin SOIC footprint and need to consolidate sourcing. The electrical comparison indicates compatible characteristics, but procurement and qualification requirements still govern the final choice.
Is ISL8488EIB suitable for industrial RS-485 equipment?
The ISL8488EIB is suitable for RS-485 and RS-422 interface sections in industrial equipment because it combines balanced differential communication, ±15 kV ESD protection, and a 4.5 V to 5.5 V supply range. The manufacturer datasheet covers the device family, but final industrial suitability also depends on temperature qualification, isolation requirements, EMC testing, grounding, and the protection of any externally routed cables.
Is ISL8488EIB the same as ISL8488EIBZA?
The ISL8488EIB and ISL8488EIBZA are electrically and pin-compatible for PCB reuse, but they are distinct ordering codes. The verified comparison describes the ISL8488EIBZA as an 8-pin SOIC, 250 kbps, 4.5 V to 5.5 V complete replacement. Engineers should still verify the suffix-specific ordering information and required packaging before approving a substitution.
What is the best Renesas equivalent for ISL8488EIB?
The ISL8488EIBZA is the best-supported Renesas direct equivalent identified for the ISL8488EIB because it retains the same 8-pin SOIC footprint and is described as a complete replacement with consistent terminals and performance characteristics. The ISL8488EIB-T is another same-package option listed in a direct comparison, although its packaging requirements should be checked separately.
Where can I buy ISL8488EIB and what is its price?
Use the Request a Quote form on this page to ask for ISL8488EIB pricing, stock confirmation, lead time, and minimum order quantity. The form allows the current commercial response to be matched to the required quantity and package. Static prices and availability can change, so current figures should not be copied from an archived listing.
What is the lead time for ISL8488EIB?
Request the current ISL8488EIB lead time through the Request a Quote form on this page. Lead time can depend on order quantity, selected shipping format, and current factory or channel availability. The Request a Quote response should provide the most relevant commercial commitment for the exact ISL8488EIB ordering code.
Is ISL8488EIB in stock?
Use the Request a Quote form on this page to request a current stock confirmation for ISL8488EIB. Include the required quantity and shipment destination in the request so the response can reflect available inventory and the correct logistics. A distributor's previous availability indication does not establish the stock position for a later purchase order.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা ISL8488EIB — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose the ISL8488EIB when the original ordering code is already qualified in the BOM, supplier plan, or serialized PCB documentation. It combines one driver and one receiver, RS-422/RS-485 operation, a 4.5 V to 5.5 V supply range, and ±15 kV ESD protection in an 8-pin SOIC. Select ISL8488EIBZA when a verified complete replacement is needed for PCB reuse; the comparison identifies consistent terminals and package characteristics. ISL8488EIB-T is also represented as a direct same-package replacement, but its shipping format should be reviewed before approval. ISL8488EIBZA-T offers another matching 8-pin option with a stated 250 kbps rating. The related ISL8489EIB and ISL8490EIB devices belong to the same Renesas family, but their enable or low-power control details must be checked against the existing schematic before substitution. For any change, verify pin functions, supply limits, operating-temperature grade, ESD rating, bus termination, and production status.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য ISL8488EIBZA ISL8488EIB-T ISL8488EIBZA-T ISL8489EIB ISL8490EIB
Package 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC
Brand Renesas Electronics Renesas Electronics Renesas Electronics Renesas Electronics Renesas Electronics Renesas Electronics
Communication Standards RS-422 and RS-485 RS-422 and RS-485 RS-422 and RS-485 RS-422 and RS-485 RS-422 and RS-485 RS-422 and RS-485
Driver and Receiver Count 1 driver and 1 receiver 1 driver and 1 receiver 1 driver and 1 receiver 1 driver and 1 receiver 1 driver and 1 receiver 1 driver and 1 receiver
Supply Voltage Range 4.5 V to 5.5 V 4.5 V to 5.5 V 4.5 V to 5.5 V 4.5 V to 5.5 V 4.5 V to 5.5 V 4.5 V to 5.5 V
Process Technology BiCMOS BiCMOS BiCMOS BiCMOS BiCMOS BiCMOS
Latch-Up Protection Yes Yes Yes Yes Yes Yes

মূল পার্থক্যসমূহ

  • Verified complete replacement with the same package (বনামISL8488EIBZA)
  • Broad integrated transient protection (বনামISL8488EIBZA-T)
  • Tolerant single-rail operation (বনামISL8488EIB-T)

ডিজাইন নোট

Do not treat ESD protection as a substitute for an overvoltage or surge-protection network. The manufacturer rates the ISL8488EIB for ±15 kV ESD strikes on driver outputs and receiver inputs, but long field cables can also expose the interface to larger surge or fault-energy events. Select a separate surge-protection solution based on the cable length, grounding arrangement, and required system withstand level, then verify that its clamping behavior is compatible with the transceiver.

Place the transceiver close to the connector so the protected communication pins connect to the external lines through the shortest possible traces. Route the driver and receiver pair together with a continuous ground reference, avoid routing the pair beside high-current switching nodes, and keep the 5 V bypass capacitor close to the supply pin. These layout practices reduce ESD exposure, radiated coupling, and ground-potential effects on the differential receiver.

In an RS-485 multidrop network, install termination only at the two physical ends of the bus rather than at every transceiver. Use the driver-enable and receiver-enable inputs to guarantee that only one node drives the network at a time and that the bus-idle state is defined. Termination resistance, stub length, baud rate, and cable characteristics should be evaluated together because no single termination value is universally correct.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statements were identified for this exact ordering code.

ডেটা যাচাই করা হয়েছে: 2026-11-15 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

ISL8488EIB datasheet ISL8488EIB pinout ISL8488EIB datasheet pdf ISL8488EIB equivalent ISL8488EIB replacement ISL8488EIB cross reference ISL8488EIB vs ISL8488EIBZA ISL8488EIB footprint ISL8488EIB application circuit ISL8488EIB price ISL8488EIB stock Renesas ISL8488EIB

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Renesas Electronics ISL8488EIB ISL8488EIBZA ISL8488EIB-T ISL8488EIBZA-T ISL8489EIB ISL8490EIB RS-485 RS-422 single transceiver differential line driver differential receiver interface IC communication IC BiCMOS 5 V power supply 4.5 V to 5.5 V supply ESD protection ±15 kV ESD protection latch-up protection SOIC-8 industrial automation building control data acquisition
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন