LC4064V-25T48C - 64-Macrocell 2.5ns CPLD | Lattice
MPN: LC4064V-25T48C ✓ সক্রিয়LC4064V-25T48C সারাংশ
A complex programmable logic device, or CPLD, is a user-programmable semiconductor that combines interconnected programmable logic blocks with configurable I/O structures. The LC4064V series belongs to the ispMACH 4000V family, a high-density PLD family positioned between simple PAL/GAL devices and larger FPGAs. Its macrocell-based architecture provides deterministic combinational and registered logic, allowing control, interface, decoding, and glue-logic functions to be consolidated into a compact device.
Key features include 64 macrocells, four logic blocks, and as many as 32 I/O pins. The -25 speed designation identifies a 2.5 ns propagation-delay class, while the family documentation identifies operation with 3.3 V, 2.5 V, and 1.8 V programming and I/O environments. In-system programmability allows the device to be configured from the target system rather than requiring a separate programming fixture. The 48-pin TQFP package supports conventional surface-mount assembly and PCB inspection.
The ispMACH 4000 architecture uses interconnected macrocells and shared programmable interconnect resources to implement logic equations and sequential functions. Because the device is organized into macrocells rather than individually described gates, a design can be expressed in a hardware description language and compiled into a compact configuration image. Lattice documents that density devices within the same package can share a common pin arrangement, which supports design migration when capacity requirements change.
Typical uses include industrial control logic, interface translation, bus decoding, peripheral glue logic, display sequencing, and embedded system control. The four logic blocks and 32 available I/O pins make the device suitable for designs that require a moderate number of parallel digital signals and moderately fast deterministic transitions. It is also appropriate for industrial equipment and legacy control systems where a small, low-density CPLD is preferable to a larger FPGA.
Design with the LC4064V-25T48C by assigning each external signal to a documented package pin, observing the supply and I/O voltage limits, and confirming that every implemented function fits the available macrocell and logic-block resources. Include the manufacturer's recommended programming interface and decoupling arrangement, and validate timing against the external clock and interface requirements rather than relying on the speed grade alone.
This product page combines package and family details, pin-compatible family alternatives, application guidance, and PCB-focused design notes. It is intended to help engineers assess whether the 64-macrocell, 32-I/O, 2.5 ns CPLD provides sufficient logic density, interface capacity, and timing performance for a specific embedded-control design.
এর জন্য ড্রপ-ইন বিকল্প LC4064V-25T48C — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই সিরিজের ভ্যারিয়েন্ট
একই সিরিজের মডেল যেগুলো drop-in compatible LC4064V-25T48C (একই form factor এবং footprint) — পার্থক্য রয়েছে Device Type, Package.
LC4064V-25TN48C
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
LC4064B-25T48C
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →LC4064C-25T48C
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →LC4064V-10TN48I
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
LC4064V-5TN48I
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
LC4064V-25T48C সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Device Type | ispMACH 4000V complex programmable logic device |
| Programmable Logic Density | 64 macrocells |
| Logic Blocks | 4 logic blocks |
| Maximum User I/O | 32 pins |
| Propagation Delay | 2.5 ns |
| Family Maximum Frequency | 400 MHz |
| Internal Supply Voltage | 3.0 V to 3.6 V |
| Supported Supply and I/O Levels | 3.3 V, 2.5 V, and 1.8 V |
| In-System Programmability | Supported |
| প্যাকেজ | 48-pin TQFP, 7 mm x 7 mm |
| মাউন্টিং টাইপ | Surface mount |
LC4064V-25T48C 48-pin tqfp, 7 mm x 7 mm পিন কনফিগারেশন গাইড
LC4064V-25T48C (48-pin tqfp, 7 mm x 7 mm প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি LC4064V-25T48C.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
LC4064V-25T48C এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Control Logic, Peripheral Bus Interface, Display and LED Sequencing, Network and Communication Interface Logic, Embedded System Boot and Sequencing, Legacy Equipment Control.
Industrial Control Logic
The LC4064V-25T48C suits compact industrial control logic where 64 macrocells and four logic blocks can consolidate state-machine, interlock, and sequencing functions. Its 2.5 ns propagation-delay class provides deterministic behavior for control paths, while as many as 32 user I/O pins support sensors, actuator drivers, and status indicators. In-system programmability simplifies production updates because the configuration can be loaded within the target system. The principal design check is available logic capacity after routing and I/O assignment; engineers should compile the design with the appropriate Lattice toolchain and confirm timing against the industrial control clock requirements.
সুপারিশকৃত
Peripheral Bus Interface
The LC4064V-25T48C can implement protocol adaptation, address decoding, and control-signal bridging for embedded peripherals. Thirty-two available user I/O pins provide enough parallel connectivity for moderate data and control paths, and the four logic blocks divide the design into manageable logic regions. A 2.5 ns propagation delay is useful when interfacing with clocked logic whose setup and hold windows are narrow. Use the datasheet pin table to separate clock, data, and control signals, and verify that the selected I/O voltage is appropriate for every connected peripheral before enabling the configuration pins.
সুপারিশকৃত
Display and LED Sequencing
The LC4064V-25T48C is suitable for deterministic display sequencing, multiplexed indicator control, and keypad decoding where multiple parallel outputs must follow programmed timing rules. Its 64 macrocells provide room for counters, decoders, and state logic, while up to 32 user I/O pins can connect display segments, control lines, and switches. The 2.5 ns delay class supports short combinational paths, although panel refresh timing still depends on the external driver and display characteristics. Assign outputs according to the package pin table and isolate repetitive switching from sensitive clock and programming nets.
সুপারিশকৃত
Network and Communication Interface Logic
The LC4064V-25T48C can implement framing, command decoding, parity generation, and status multiplexing around a communication controller. Its 32 user I/O pins permit parallel data transfer between the controller and external transceivers, while four logic blocks organize protocol and control functions. The 2.5 ns speed class can shorten delays in combinational decode paths, but system-level timing must include transceiver and connector delays. Keep clock routing short and separate, observe the documented I/O voltage requirements, and validate the complete interface using worst-case timing rather than relying only on the nominal delay class.
সুপারিশকৃত
Embedded System Boot and Sequencing
The LC4064V-25T48C is useful for power-up sequencing, reset distribution, mode selection, and peripheral enable logic in an embedded system. Programmable registered functions can coordinate several digital outputs, and in-system programmability permits configuration changes during manufacturing or field updates. The 48-pin TQFP package provides a conventional surface-mount solution for compact controller boards. Because the device has 64 macrocells rather than a large general-purpose fabric, designers should use it primarily for deterministic coordination logic and reserve broader programmable-logic functions for a larger device.
সুপারিশকৃত
Legacy Equipment Control
The LC4064V-25T48C can consolidate obsolete control logic into a compact programmable implementation for legacy equipment. It is suited to replacing combinations of fixed-logic ICs when the required function fits 64 macrocells, four logic blocks, and 32 user I/O pins. The 2.5 ns delay class supports deterministic machine-control paths, while the 48-pin TQFP package simplifies board-level integration. Before replacement, reproduce the original truth tables and timing behavior, identify any open-collector or level-shifting interfaces, and verify that the replacement's I/O structure and operating limits match the original circuitry.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা LC4064V-25T48C — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
The LC4064V-10TN48I and LC4064V-5TN48I share the package-oriented footprint but have 10 ns and 5 ns speed designations, respectively. They may suit non-critical control paths, yet they do not provide the timing margin of the 2.5 ns target. For any replacement, verify the manufacturer pinout, supply and I/O levels, temperature grade, configuration tool support, and worst-case timing. Use the target when density and deterministic response matter more than adopting a slower or different family revision.
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | LC4064V-25TN48C | LC4064B-25T48C | LC4064C-25T48C | LC4064V-10TN48I | LC4064V-5TN48I |
|---|---|---|---|---|---|---|
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Package | TQFP-48 | TQFP-48 | TQFP-48 | TQFP-48 | TQFP-48 | TQFP-48 |
| Device Family | ispMACH 4000V | ispMACH 4000V | ispMACH 4000 generation | ispMACH 4000 generation | ispMACH 4000V | ispMACH 4000V |
| Programmable Logic Density | 64 macrocells | 64 macrocells | Not stated in the cross-reference record | Not stated in the cross-reference record | Not stated in the cross-reference record | Not stated in the cross-reference record |
| Propagation Delay | 2.5 ns | 2.5 ns | 2.5 ns | 2.5 ns | 10 ns | 5 ns |
| Family Maximum Frequency | 400 MHz | 400 MHz | Not stated in the cross-reference record | Not stated in the cross-reference record | Not stated in the cross-reference record | Not stated in the cross-reference record |
| Internal Supply Voltage | 3.0 V to 3.6 V | 3.3 V device environment | Not stated in the cross-reference record | Not stated in the cross-reference record | Not stated in the cross-reference record | Not stated in the cross-reference record |
| User I/O Count | 32 pins | Not stated in the cross-reference record | Not stated in the cross-reference record | Not stated in the cross-reference record | Not stated in the cross-reference record | Not stated in the cross-reference record |
| Programmability | In-system programmable | In-system programmable | Not stated in the cross-reference record | Not stated in the cross-reference record | Not stated in the cross-reference record | Not stated in the cross-reference record |
মূল পার্থক্যসমূহ
- Direct 2.5 ns timing-class family option (বনামLC4064V-25TN48C)
- Four logic blocks with 32 user I/O pins (বনামLC4064B-25T48C)
- Lower propagation delay than slower speed-grade alternatives (বনামLC4064V-10TN48I)
- In-system programming for production and field updates (বনামLC4064B-25T48C)
ডিজাইন নোট
Use the exact 48-pin TQFP footprint and verify pin 1 orientation against the Lattice package drawing before routing. Fine-pitch leads require a paste stencil that produces separate, controlled deposits; excessive solder can bridge adjacent pins. Inspect the perimeter rows after reflow and avoid placing tall components or enclosure hardware that interfere with the soldering profile.
Follow the datasheet's power-pin assignment and decoupling recommendations rather than assuming every ground-adjacent package lead is interchangeable. Place the required bypass capacitor adjacent to the supply and ground pins, use a short return path, and keep the ground plane continuous under the device. Confirm that all external signals use a supported 3.3 V, 2.5 V, or 1.8 V environment according to the selected pin configuration.
Keep clock traces short and isolated from programming and high-transition-rate I/O nets. Reserve a continuous ground reference beneath clock routes, avoid routing signals over split planes, and place programming-interface components near the associated device pins. If the design includes external memories or converters, separate their switching-current paths from sensitive logic traces to reduce coupling into the CPLD.
Do not treat the 2.5 ns speed designation as a guaranteed board-level operating frequency. Timing analysis must include the configured logic path, macrocell interconnect, input and output delays, setup and hold requirements, and external component delays. Recompile the design for the exact device revision and validate the configuration image in the intended system before production.
কমপ্লায়েন্স তথ্য
The exact LC4064V-25T48C compliance declarations were not identified in the manufacturer product information. The industrial designation is a family description, not an AEC-Q100 qualification statement.