NXP Semiconductors

LPC11U14FHN33/201 - 50MHz Cortex-M0 MCU | NXP

MPN: LPC11U14FHN33/201 ✓ সক্রিয়
2.5 V to 3.3 V Vdss 32-pin HVQFN (7 x 7 mm) Package 50 MHz Speed 32 KB Memory
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

LPC11U14FHN33/201 সারাংশ

NXP LPC11U14FHN33/201 is a low-cost 32-bit microcontroller based on the Arm Cortex-M0 processor, operating up to 50 MHz with 32 KB of flash memory and 6 KB of SRAM in a 32-pin HVQFN package. The device targets control-intensive applications that need efficient 32-bit processing, compact code size, and a low-power architecture without the resource requirements of a larger microcontroller.

A microcontroller is a programmable system-on-chip that integrates a processor core, nonvolatile program memory, volatile data memory, peripherals, and I/O into one package. The LPC11Uxx family occupies the low-end 32-bit segment of the embedded-control hierarchy and is commonly positioned as an upgrade from 8-bit or 16-bit architectures. Its Arm Cortex-M0 core uses a simple instruction set and provides deterministic peripheral access suitable for embedded control, metering, lighting, alarms, and consumer equipment.

The headline configuration combines a 50 MHz clock with 32 KB flash and 6 KB SRAM, providing enough memory for compact control firmware while keeping the device economical. Operation from 2.5 V to 3.3 V supports common embedded supply systems. The 32-HVQFN surface-mount package offers a compact board footprint, while its exposed-pad construction provides a thermal connection to the PCB for improved heat dissipation. The manufacturer lists the LPC11U14FHN33 as an active product.

The LPC11Uxx architecture was created for low-cost 8-bit and 16-bit migration paths. Compared with a conventional 8-bit controller, a 32-bit Cortex-M0 core offers a wider address space, more efficient arithmetic, and greater software ecosystem compatibility. The simple Cortex-M0 instruction set also reduces code-size overhead compared with more complex processor architectures, helping preserve the limited flash and SRAM budget.

Typical uses include energy metering, lighting control, alarm systems, consumer peripherals, and mobile accessories. These applications benefit from the combination of 50 MHz processing, 6 KB SRAM, and a compact 7 x 7 mm package. The Arm Keil device support entry identifies metering, lighting, alarm systems, consumer peripherals, and mobile devices as representative LPC1100-series applications.

PCB design should preserve the exposed-pad thermal path with a continuous ground-connected copper area and the manufacturer-recommended via arrangement. Decoupling should follow the circuit requirements in the LPC11Uxx datasheet, and programming, reset, clock, and unused-pin decisions should be checked against the device pin-description table before layout release.

This product page combines the exact orderable MPN, core and memory characteristics, practical application guidance, package considerations, and a transparent comparison with the identified same-package family alternative. It also organizes sourcing, documentation, firmware-support, and replacement questions around the LPC11U14FHN33/201 for faster engineering evaluation.

এর জন্য ড্রপ-ইন বিকল্প LPC11U14FHN33/201 — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

LPC11U14FHI33

✅ ড্রপ-ইন
📦 32-HVQFN (7x7 mm)
Published core, frequency, flash, SRAM, and package match: 50 MHz Cortex-M0, 32 KB flash, 6 KB SRAM, and HVQFN32; ordering and temperature codes require confirmation.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

LPC11U14FHN33/201 সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Product Type 32-bit ARM Cortex-M0 microcontroller
CPU Core Arm Cortex-M0
Maximum CPU Frequency 50 MHz
Flash Memory 32 KB
SRAM 6 KB
অপারেটিং সাপ্লাই ভোল্টেজ 2.5 V to 3.3 V
Architecture 32-bit RISC
প্যাকেজ 32-pin HVQFN (7 x 7 mm)
মাউন্টিং টাইপ Surface mount
Exposed Pad Present
Ordering Package Tray
লাইফসাইকেল স্ট্যাটাস Active
Target Applications 8-bit and 16-bit controller migration, eMetering, lighting, alarm systems, consumer peripherals, and mobile devices
Software Support CMSIS Pack LPC1100_DFP
পিন সংখ্যা 32 pins

LPC11U14FHN33/201 tray পিন কনফিগারেশন গাইড

LPC11U14FHN33/201 (tray প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।

LPC11U14FHN33/201-এর জন্য tray প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি LPC11U14FHN33/201.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

LPC11U14FHN33/201 এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Smart Energy Metering, LED Lighting Control, Alarm and Security Systems, Consumer Peripheral Control, Mobile Device Accessories, Industrial Control Module.

⚡

Smart Energy Metering

LPC11U14FHN33/201 fits compact metering controllers that must collect measurements, process data, and update an interface without requiring a large processor. Its 50 MHz Arm Cortex-M0 core provides 32-bit arithmetic and addressing, while 32 KB flash accommodates the metering application, calibration data, and communications firmware. The 6 KB SRAM supports buffering without requiring a separate memory device in many compact designs. Operating from 2.5 V to 3.3 V also aligns with many metering platforms. The key engineering checks are sensor-interface timing, display or communications resource availability, and the complete peripheral configuration described in the manufacturer datasheet.

💡

LED Lighting Control

The LPC11U14FHN33/201 can serve as the central controller in an LED lighting system that coordinates switching, dimming sequences, fault handling, and user commands. Its 50 MHz Cortex-M0 core provides enough execution capability for deterministic control loops and compact protocol handling, while the 6 KB SRAM can hold current animation or effect parameters. The 32-HVQFN 7 x 7 mm package reduces board area in integrated luminaires, and the 2.5 V to 3.3 V operating range suits low-voltage LED systems. Designers should confirm the required PWM channels, timer resources, logic levels, and exposed-pad thermal implementation in the device documentation.

🧩

Alarm and Security Systems

LPC11U14FHN33/201 is suitable for compact alarm panels, detectors, and access-control accessories that combine event processing with a communications interface. The 32-bit Cortex-M0 architecture supports modern control logic more effectively than an 8-bit controller while retaining a compact code footprint suited to 32 KB flash. Its 6 KB SRAM allows protocol buffers and event state to coexist, and the 7 x 7 mm HVQFN package supports dense equipment designs. For security equipment, validate timer behavior, communication baud-rate tolerance, reset behavior, supply filtering, and the required operating-temperature range before approving the exact ordering variant.

🔧

Consumer Peripheral Control

LPC11U14FHN33/201 can control compact consumer peripherals that combine multiple inputs, local processing, and a serial connection to a host. Its 50 MHz Cortex-M0 core handles firmware tasks in a simple instruction set, while 32 KB flash and 6 KB SRAM provide a practical balance for peripheral control, status reporting, and configuration storage. The 2.5 V to 3.3 V supply range supports common embedded power rails, and the 32-pin HVQFN package minimizes PCB area. Engineers should verify USB, UART, SPI, I2C, and GPIO requirements against the exact device resources, then reserve capacitor and exposed-pad copper according to the recommended layout.

📱

Mobile Device Accessories

LPC11U14FHN33/201 fits mobile accessories that require local control, status sensing, and communication with a phone or portable host. Its 32-bit Cortex-M0 processor provides efficient execution for protocol handling and accessory state management, while the limited 32 KB flash and 6 KB SRAM encourage a compact firmware architecture. The small 7 x 7 mm HVQFN package is advantageous for space-constrained accessories, and operation at 2.5 V to 3.3 V simplifies integration with common embedded rails. A production design should check available serial interfaces, low-power modes, brownout behavior, and the exact accessory operating-temperature requirement.

🏭

Industrial Control Module

LPC11U14FHN33/201 can support compact industrial control modules that perform deterministic I/O sequencing, diagnostics, and local communication. Its 50 MHz Cortex-M0 core and 32-bit architecture provide useful processing headroom for low-cost controllers, while 32 KB flash and 6 KB SRAM are appropriate for focused control firmware rather than resource-heavy applications. The 32-HVQFN footprint supports high-density assemblies, and the 2.5 V to 3.3 V operating range can simplify interface design. Industrial suitability still depends on the required temperature range, electromagnetic environment, isolation strategy, and communication interfaces, which should be confirmed against the manufacturer documentation.

সুপারিশকৃত পণ্যের সারসংক্ষেপ

LPC11U14FHN33/201 NXP Semiconductors ব্যবহৃত হয়: Smart Energy Metering, LED Lighting Control, Alarm and Security Systems, Consumer Peripheral Control, Mobile Device Accessories, Industrial Control Module LPC11U14FHI33 Same-package family candidate ব্যবহৃত হয়: Smart Energy Metering, LED Lighting Control, Alarm and Security Systems, Consumer Peripheral Control, Mobile Device Accessories, Industrial Control Module LPC11U24FBD48/401 Related NXP microcontroller family member ব্যবহৃত হয়: Smart Energy Metering, LED Lighting Control, Alarm and Security Systems, Consumer Peripheral Control, Mobile Device Accessories, Industrial Control Module
What is the LPC11U14FHN33/201?
The LPC11U14FHN33/201 is an active NXP 32-bit microcontroller based on the Arm Cortex-M0 core. According to the NXP LPC11U14FHN33 product information, it operates at up to 50 MHz, contains 32 KB of flash and 6 KB of SRAM, and uses a 32-pin HVQFN package measuring 7 x 7 mm. It is intended as a low-cost migration path from 8-bit and 16-bit embedded controllers.
What are the key specifications of LPC11U14FHN33/201 that engineers should know?
The LPC11U14FHN33/201 combines an Arm Cortex-M0 processor, 50 MHz maximum operating frequency, 32 KB flash, 6 KB SRAM, and a 2.5 V to 3.3 V operating supply range. The NXP product information identifies the device in a 32-HVQFN 7 x 7 mm surface-mount package with an exposed pad. These parameters define its processing capacity, memory budget, voltage compatibility, and PCB footprint.
Where can I download the LPC11U14FHN33/201 datasheet PDF?
The official documentation entry for LPC11U14FHN33 is available on the NXP product page at https://www.nxp.com/part/LPC11U14FHN33. From the Data Sheet section, engineers can open the manufacturer documentation and select the LPC11Uxx family document covering LPC11U14FHN33. The 32-pin pin-description table, electrical limits, memory map, and recommended application circuit should be used as the primary design references.
Where can I find the LPC11U14FHN33 pinout?
The LPC11U14FHN33 pinout is defined by the 32-pin pin-description table in the NXP LPC11Uxx datasheet associated with the official product page. Use that table when assigning power, ground, reset, clock, programming, and peripheral signals because the HVQFN footprint includes an exposed thermal pad in addition to its numbered perimeter terminals. The exposed pad is not a substitute for a numbered GPIO pin.
Where to buy LPC11U14FHN33/201 online?
The LPC11U14FHN33/201 can be requested through the Request a Quote form on this page. The form is the appropriate route for checking current unit availability, order quantities, and delivery timing for the exact LPC11U14FHN33/201 order code. Its /201 ordering suffix is associated with tray presentation, so confirm the package and delivery requirements when submitting the request.
What is the price of LPC11U14FHN33/201?
The current commercial terms for LPC11U14FHN33/201 should be obtained through the Request a Quote form on this page. The form allows an engineer or buyer to request pricing for the exact 32-pin HVQFN orderable part rather than a related package or temperature-ordering variant. Submit the required quantity and target delivery terms to receive a current quotation.
What is the lead time for LPC11U14FHN33/201?
The current lead time for LPC11U14FHN33/201 should be requested through the Request a Quote form on this page. NXP lists the LPC11U14FHN33 product as active, but production timing can vary with order quantity, packaging, and supply conditions. Include the required quantity, delivery location, and target date so the commercial response can reflect the intended build schedule.
Is LPC11U14FHN33/201 in stock?
NXP lists the LPC11U14FHN33 as active, while current order-by-quantity availability is handled through the Request a Quote form on this page. Enter the required quantity to obtain current allocation and delivery information for the exact LPC11U14FHN33/201 suffix. Buyers should also verify the /201 tray presentation and any date-code or traceability requirements when placing the order.
What can replace LPC11U14FHN33/201?
LPC11U14FHI33 is the closest identified same-package family alternative because NXP describes it with the same 32 KB flash, 6 KB SRAM, HVQFN32 package, and 50 MHz Cortex-M0 configuration. The ordering-code and temperature-range details must still be checked before substitution. No additional cross-manufacturer drop-in replacement was identified with enough verified detail to claim pin-to-pin compatibility.
Is LPC11U14FHI33 the same as LPC11U14FHN33/201?
LPC11U14FHI33 and LPC11U14FHN33/201 share the published core, memory, speed, and HVQFN32 configuration, making LPC11U14FHI33 the closest identified family candidate. They are not automatically interchangeable because ordering, temperature, qualification, and marking codes can identify different variants. Confirm the complete NXP ordering information and application requirements before treating one as a drop-in replacement.
LPC11U14FHN33/201 vs LPC11U14FHI33 - which is better?
Both parts are identified with a 50 MHz Arm Cortex-M0 core, 32 KB flash, 6 KB SRAM, and an HVQFN32 package, so their primary published specifications are closely aligned. Selection should therefore focus on the exact ordering code, temperature range, qualification, and lifecycle requirements of the production build. Use the manufacturer ordering table to determine which orderable variant satisfies the product specification.
When should I choose LPC11U14FHN33/201 over LPC11U14FHI33?
Choose LPC11U14FHN33/201 when its complete ordering information matches the required temperature grade, qualification, packaging, and production configuration. Choose LPC11U14FHI33 only after NXP confirms that its orderable variant is compatible with the intended supply range and quality requirements. The shared 50 MHz speed, 32 KB flash, and 6 KB SRAM make resource capacity alone a weak distinction.
Is LPC11U14FHN33/201 suitable for battery-powered devices?
LPC11U14FHN33/201 can be suitable for compact embedded controllers, but battery suitability depends on the complete system power budget and the selected operating mode. Its 2.5 V to 3.3 V supply range supports common low-energy systems, while the Arm Cortex-M0 architecture is designed for efficient code execution. Review sleep-mode behavior, active current, and peripheral loading in the NXP datasheet before finalizing the power budget.
Is LPC11U14FHN33/201 suitable for lighting and metering applications?
Yes, the LPC11U14FHN33/201 is explicitly positioned for eMetering, lighting, alarm systems, consumer peripherals, and mobile-device control. The 50 MHz Cortex-M0 core provides 32-bit processing, while 32 KB flash and 6 KB SRAM support compact embedded-control firmware. For a production design, verify the required peripherals, measurement accuracy, update rate, and interface resources in the manufacturer documentation.
What tools and firmware support are available for LPC11U14FHN33/201?
The Arm Keil device-support entry for LPC11U14FHN33/201 identifies the CMSIS Pack LPC1100_DFP. This device support enables configuration of the LPC1100-series processor for an Arm Keil development environment. Production firmware should be built and debugged against the exact MCU device definition, and deployment should follow the programming and memory-map instructions in the NXP datasheet.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা LPC11U14FHN33/201 — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose LPC11U14FHN33/201 when the production design requires the exact active NXP orderable part with a 50 MHz Arm Cortex-M0 core, 32 KB flash, 6 KB SRAM, and a 32-pin 7 x 7 mm HVQFN footprint. It is well suited to metering, lighting, alarm systems, consumer peripherals, mobile accessories, and compact industrial controls. LPC11U14FHI33 is the closest identified same-package family candidate because its published core, speed, memory, and package configuration align; however, verify its ordering suffix, temperature range, qualification, and lifecycle status before substitution. Cross-manufacturer alternatives should not be selected solely from package dimensions because firmware support, peripheral mapping, power behavior, and exposed-pad construction can prevent a true drop-in replacement.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য LPC11U14FHI33
Package 32-HVQFN (7x7 mm) HVQFN32, 7x7 mm
Brand NXP Semiconductors NXP Semiconductors
CPU Core Arm Cortex-M0 Arm Cortex-M0
Maximum CPU Frequency 50 MHz 50 MHz
Flash Memory 32 KB 32 KB
SRAM 6 KB 6 KB
Architecture 32-bit RISC 32-bit RISC

মূল পার্থক্যসমূহ

  • Matches the published core and memory configuration of the closest identified family candidate (বনামLPC11U14FHI33)
  • Uses a compact 7 x 7 mm surface-mount package (বনামLPC11U14FHI33)
  • Supports common low-voltage embedded systems (বনামLPC11U14FHI33)

ডিজাইন নোট

Treat the HVQFN exposed pad as a thermal and electrical land pattern, not as an optional cosmetic feature. Connect it to the board ground plane using the manufacturer-recommended via arrangement and avoid routing sensitive signals beneath the pad region. Confirm the final copper area and thermal performance against the package drawing so heat from sustained peripheral activity can leave the device without increasing adjacent-component temperature.

Design the 2.5 V to 3.3 V supply path so startup, reset, and peripheral loading remain within the device electrical limits. Place the required input and decoupling capacitors close to their associated pins, keep the return path compact, and account for voltage tolerance and transient behavior at the board connector. Review the exact pin description and recommended application circuit before assigning supplies or unused pins.

Reserve the complete 32-HVQFN land pattern, including the exposed pad and its thermal vias, before routing functional signals. Use the package drawing rather than a generic QFN footprint when defining courtyard, solder-mask, and paste geometry. Programming access, reset, clock components, and serial interfaces should be positioned for practical board-level programming and production inspection.

Do not treat a related LPC11Uxx order code as interchangeable solely because it uses the same family and HVQFN32 outline. Check the ordering suffix, temperature range, qualification, exposed-pad layout, and active lifecycle status for the selected production part. Firmware should also be validated against the exact MCU device definition in the CMSIS Pack LPC1100_DFP.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The manufacturer product page lists environmental quality information and product change notices, but no specific compliance conclusion was extracted. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status for the exact ordering code before qualification.

ডেটা যাচাই করা হয়েছে: 2026-11-20 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

LPC11U14FHN33/201 datasheet LPC11U14FHN33 datasheet pdf LPC11U14FHN33 pinout LPC11U14FHN33 equivalent LPC11U14FHN33 replacement LPC11U14FHN33 price LPC11U14FHN33 stock NXP LPC11U14FHN33 LPC11U14FHN33 vs LPC11U14FHI33 LPC11U14FHN33 HVQFN32 footprint LPC11U14FHN33 Cortex-M0 50MHz LPC11U14FHN33 application circuit

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

NXP Semiconductors LPC11U14FHN33/201 LPC11U14FHN33 LPC11U14FHI33 LPC11U24FBD48/401 Arm Cortex-M0 microcontroller MCU 32-bit microcontroller embedded controller low-power controller semiconductor HVQFN32 QFN family surface-mount package SMD 32 KB flash 6 KB SRAM 50 MHz CMSIS Pack LPC1100_DFP energy metering lighting control alarm systems consumer peripherals
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন