NXP Semiconductors

LPC18S57JBD208E - 180MHz Cortex-M3 MCU | NXP | LQFP-208

MPN: LPC18S57JBD208E ✓ সক্রিয়
208-pin LQFP (28 x 28 mm) Package 180 MHz Speed 1 MB (1M x 8) Memory
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

LPC18S57JBD208E সারাংশ

The NXP LPC18S57JBD208E is an Arm Cortex-M3 microcontroller that operates at up to 180 MHz and integrates 1 MB of flash memory with 136 kB of SRAM in a 208-pin LQFP package measuring 28 x 28 mm. Designed for connected embedded equipment, the device combines an Ethernet controller, two high-speed USB interfaces, LCD support, electromagnetic-compatibility features, and an AES engine in one microcontroller package.

A microcontroller is a programmable control component that integrates a processor core, memory, and peripheral interfaces onto a single semiconductor device. Within the wider embedded-computing hierarchy, the LPC18S57 belongs to the Arm Cortex-M3 MCU class, which is used for real-time control rather than desktop or server processing. Its integrated connectivity and security peripherals reduce the need for separate interface chips while conserving board area in industrial and communications equipment.

Three headline capabilities distinguish this device. The 180 MHz Cortex-M3 core provides substantial application-processing headroom, while 1 MB of embedded flash supports larger firmware images and connected-control code. Integrated Ethernet, dual high-speed USB, and LCD connectivity cover several common external interfaces without requiring a companion bus controller. The 208-pin LQFP-208 package exposes a large number of general-purpose I/O lines and dedicated peripheral functions for complex motherboards.

The Cortex-M3 processor uses a three-stage pipeline, as described by NXP, and is supported by enhanced debug features and low-power-consumption capabilities. The integrated AES engine supports hardware-assisted encryption, which can reduce the processing burden of security routines compared with a software-only implementation. Ethernet and USB connectivity also allow the controller to participate in network management, industrial gateways, human-machine interfaces, and service equipment.

Typical uses include industrial Ethernet controllers, USB-connected test and measurement equipment, LCD-equipped operator panels, building automation nodes, and embedded gateways. The combination of 142 reported I/O lines and a large package makes the part especially useful where several sensors, relays, displays, communications ports, and status indicators must share one controller board.

PCB design should treat the 28 x 28 mm LQFP-208 as a high-pin-count design. Use the NXP pin-description table and package drawings to assign every power, ground, clock, debug, and I/O connection, and place decoupling capacitors close to the corresponding supply pins. Confirm board-routing rules, thermal performance, and peripheral pin multiplexing in the manufacturer documentation before committing the layout.

This page combines the NXP product information and distributor records with practical design guidance, package details, interface-specific application analysis, and a focused comparison against identified same-package candidates. It highlights where firmware, peripheral, and qualification review remains necessary before any substitution is approved for production hardware.

এর জন্য ড্রপ-ইন বিকল্প LPC18S57JBD208E — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible LPC18S57JBD208E (একই form factor এবং footprint) — পার্থক্য রয়েছে LCD Support, Package.

NXP Semiconductors
LCD Support: Yes
Package: 208-LQFP (28 mm x 28 mm)
এর সাথে তুলনা করুন LPC18S57JBD208E →

LPC18S57JBD208

✅ ড্রপ-ইন
📦 LQFP-208 (28 x 28 mm)
Same LPC18S57 family, Cortex-M3 core, 1 MB flash, 136 kB SRAM, and 208-pin LQFP footprint; ordering-suffix grade differs by 0% in core and memory ratings

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

LPC1857JBD208E

✅ ড্রপ-ইন
NXP Semiconductors
📦 LQFP-208 (28 x 28 mm)
32-bit ARM Cortex-M3 microcontroller · 180 MHz · 1 MB (1M x 8) · 136 kB · ARM Cortex-M3 · 3-stage · 2 HS USB · Yes

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

LPC18S57JBD208E সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Product Type 32-bit ARM Cortex-M3 microcontroller
Processor Core Arm Cortex-M3
Maximum CPU Frequency 180 MHz
Flash Memory 1 MB (1M x 8)
SRAM 136 kB
Ethernet Interface 1 integrated Ethernet controller
High-Speed USB Interface 2 integrated high-speed USB interfaces
LCD Support Integrated
AES Engine Integrated hardware AES engine
EMC Support Integrated EMC features
Number of I/O Lines 142 lines
প্যাকেজ 208-pin LQFP (28 x 28 mm)
Package Code LFQFP
Terminal Form Gull wing
Package Shape Square
মাউন্টিং টাইপ Surface mount
CPU Pipeline 3-stage pipeline

LPC18S57JBD208E square পিন কনফিগারেশন গাইড

LPC18S57JBD208E (square প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।

LPC18S57JBD208E-এর জন্য square প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি LPC18S57JBD208E.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

LPC18S57JBD208E এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Ethernet Control Nodes, USB Test and Measurement Equipment, LCD Operator Panels, Building Automation Gateways, Encrypted Network Appliances, High-Pin-Count Embedded Control Boards.

🏭

Industrial Ethernet Control Nodes

The LPC18S57JBD208E fits industrial Ethernet nodes because it combines an integrated Ethernet controller with a 180 MHz Arm Cortex-M3 core and 136 kB of SRAM. The processor can run protocol stacks, supervisory logic, and real-time control tasks while 142 reported I/O lines connect sensors, relay outputs, and status indicators. A separate Ethernet PHY can handle the physical-layer interface. The 28 x 28 mm LQFP-208 package provides substantial routing flexibility, although its 208 terminals require careful layer-transition planning and a ground plane designed for the device's EMC requirements.

🖥️

USB Test and Measurement Equipment

The LPC18S57JBD208E is appropriate for USB-connected instruments that require more than a basic control MCU. Its two high-speed USB interfaces can support a host or device function, while the 180 MHz Cortex-M3 core handles acquisition sequencing, command parsing, and display updates from 136 kB of SRAM. The 1 MB of embedded flash provides room for protocol stacks and field-upgrade routines. Keep USB routing short, provide the required connector protection, and confirm host or device capability, power sourcing rules, and transceiver requirements in the NXP documentation.

📺

LCD Operator Panels

The LPC18S57JBD208E suits operator panels that combine an LCD, communications, and local real-time control. Its LCD support removes the need for a separate display controller in suitable applications, while the 180 MHz core can process touch input, update the display, and supervise sensors. The 136 kB of SRAM supports screen and communications buffering, and 142 I/O lines leave ample capacity for keys, encoders, lamps, and isolated field inputs. Verify panel interface timing and voltage levels, then route sensitive display and communication lines away from high-edge-rate switching nodes.

🧩

Building Automation Gateways

The LPC18S57JBD208E can serve as a building-automation gateway controller that gathers sensor data, drives local outputs, and forwards status over Ethernet or USB. Its low-power-consumption-oriented Cortex-M3 platform, integrated Ethernet, and 136 kB of SRAM allow protocol handling and application logic to run in one device. The 1 MB flash supports firmware and configuration storage, while the many I/O lines simplify connectivity to room controllers, occupancy sensors, and actuator boards. Design the power supply for the Ethernet PHY as well as the MCU, and plan boot recovery for field-deployed equipment.

🌐

Encrypted Network Appliances

The LPC18S57JBD208E is useful in network appliances where communications, local control, and hardware-assisted security must coexist. Its integrated AES engine offloads encryption processing from the Cortex-M3 core, while the 180 MHz operating rate and 1 MB of flash support networking and control firmware. Ethernet connectivity enables remote management, and the two high-speed USB interfaces can support configuration storage or service connections. Use unique device keys in protected storage, isolate administrative interfaces, and confirm the exact AES modes and security features documented by NXP before designing the firmware boundary.

⚙️

High-Pin-Count Embedded Control Boards

The LPC18S57JBD208E is well matched to connector-rich embedded boards that need numerous digital controls in a single controller. The LQFP-208 package exposes 142 reported I/O lines, allowing sensors, relays, encoders, displays, and communications ports to share one design without external I/O expanders. The 180 MHz core and 136 kB of SRAM support real-time acquisition and control. Because the package has a 28 x 28 mm body and 0.5 mm-class lead pitch, use the manufacturer land pattern and plan fanout or multilayer escape routing before placement.

What is the LPC18S57JBD208E?
The LPC18S57JBD208E is a 32-bit Arm Cortex-M3 microcontroller from NXP designed for embedded applications with substantial connectivity requirements. It operates at up to 180 MHz, provides 1 MB of flash and 136 kB of SRAM, and integrates Ethernet, two high-speed USB interfaces, LCD support, EMC features, and an AES engine. It is packaged in a 208-pin LQFP measuring 28 x 28 mm.
What are the key specifications of LPC18S57JBD208E that engineers should know?
The key specifications of the LPC18S57JBD208E are a 180 MHz Arm Cortex-M3 core, 1 MB of flash, 136 kB of SRAM, and a 208-pin LQFP-208 package. Integrated connectivity includes Ethernet, two high-speed USB interfaces, and LCD support, while security and compliance support include an AES engine and EMC features. The distributor record also identifies 142 I/O lines, making the device suitable for connector-rich embedded control boards.
Where can I download the LPC18S57JBD208E datasheet PDF?
The official LPC18S57JBD208E documentation is available through the NXP product page at https://www.nxp.com/part/LPC18S57JBD208. Use the manufacturer datasheet for the authoritative pin-description table, power architecture, clock requirements, peripheral multiplexing, electrical limits, and package drawings. Third-party HTML datasheet mirrors can assist with quick reading, but the NXP document should control production design and qualification decisions.
Where can I find the LPC18S57JBD208E pinout?
The LPC18S57JBD208E pinout is defined in the manufacturer package drawing and pin-description tables for the 208-pin LQFP. Because this is a 208-terminal device with numerous multiplexed and power pins, use the NXP documentation when assigning every track. Confirm pin numbering, exposed supply connections, ground distribution, and peripheral functions against the exact ordering code before fabrication.
Can LPC18S57JBD208E be used in an Ethernet-connected industrial controller?
Yes, the LPC18S57JBD208E is well suited to Ethernet-connected industrial control because it combines an Ethernet controller with a 180 MHz Cortex-M3 core, 136 kB of SRAM, and 142 reported I/O lines. The CPU can execute protocol handling and real-time control tasks while the remaining I/O connect sensors, actuators, and status devices. Validate Ethernet PHY selection, isolation requirements, and EMC layout using the NXP reference information.
What can replace the LPC18S57JBD208E?
The closest identified same-package candidates are the LPC18S57JBD208 and the LPC1857JBD208E, but neither should be treated as an automatic substitution. The LPC18S57JBD208 shares the device family and 208-pin LQFP designation, while the LPC1857JBD208E retains an Arm Cortex-M3 core but belongs to a different MCU family with a different peripheral mix. Firmware, pin multiplexing, clocks, peripherals, and board-level qualification must be reviewed before replacement.
Is the LPC18S57JBD208E the same as the LPC18S57JBD208?
The LPC18S57JBD208E and LPC18S57JBD208 refer to the same NXP microcontroller family and 208-pin LQFP device, but the ordering suffixes can indicate different commercial or temperature-grade treatments. Because the suffix details are not stated on the product listing, request the ordering information from NXP or XAIPART and confirm the full ordering code before treating the two as interchangeable for production.
Is LPC18S57JBD208E suitable for USB and LCD test equipment?
The LPC18S57JBD208E is suitable for USB-connected test equipment with an operator display because it integrates two high-speed USB interfaces and LCD support alongside the 180 MHz Cortex-M3 core. Its 136 kB of SRAM supports protocol buffering and control tasks, while 142 I/O lines support front-panel controls and status signaling. USB host or device PHY support, display electrical requirements, and firmware drivers must be confirmed in the manufacturer documentation.
When should I choose LPC18S57JBD208E over an LPC18S57JBD208?
Choose LPC18S57JBD208E when the design requires the specific extended-ordering treatment and operating grade associated with that suffix. Choose LPC18S57JBD208 when the base ordering code satisfies the product grade, temperature, and sourcing requirements. The relevant decision is not package compatibility but the manufacturing and environmental specification attached to the complete ordering code, which should be confirmed with the manufacturer.
What is the best NXP equivalent for LPC18S57JBD208E?
The most defensible NXP alternative identified for the LPC18S57JBD208E is the LPC18S57JBD208 because it belongs to the same LPC18S57 family and uses the same 208-pin LQFP designation. The LPC1857JBD208E is another 208-pin Cortex-M3 candidate, but its peripheral organization differs. For either choice, verify the complete pin table, boot configuration, clocking, peripheral availability, and firmware dependencies before release to manufacturing.
LPC18S57JBD208E vs LPC1857JBD208E - which is better for a connected control board?
The LPC18S57JBD208E is the better match when a design specifically depends on the LPC18S57 family's Ethernet, dual high-speed USB, LCD, EMC, and AES integration. The LPC1857JBD208E uses the same Arm Cortex-M3 architecture and 208-pin LQFP class, but it belongs to a different family with a different peripheral mix. The decision therefore depends on required interfaces and verified pin multiplexing, not CPU architecture alone.
How much power does the LPC18S57JBD208E consume?
Operating and sleep current must be taken from the NXP electrical characteristics for the exact supply voltage, temperature grade, peripheral configuration, and clock state. The LPC18S57 family is designed for low-power-consumption operation, but a single current figure would not represent Ethernet, USB, LCD, and CPU activity simultaneously. Use the manufacturer power-consumption figures and the duty cycle of the final firmware to size the supply and thermal design.
What is the LPC18S57JBD208E lifecycle status?
The LPC18S57JBD208E remains listed as an active embedded microcontroller on the NXP product page, and current distributor catalog records are also present. For an approved production program, request a written lifecycle and supply assurance statement for the exact ordering suffix. Changes to temperature grade, package, or sourcing route can require a separate PCN review even when the base device remains active.
Is LPC18S57JBD208E in stock and what is its lead time?
Current inventory and production lead time should be confirmed through the Request a Quote form on this page because distributor stock levels change independently of the manufacturer's lifecycle status. Provide the LPC18S57JBD208E ordering code, target quantity, and required delivery window with your request. NXP distribution channels can also confirm schedule and long-term supply commitments for approved designs.
Where can I buy LPC18S57JBD208E online?
The LPC18S57JBD208E can be requested through the Request a Quote form on this page, which supports an engineering review of package, temperature grade, quantity, and delivery requirements. The manufacturer product page at https://www.nxp.com/part/LPC18S57JBD208 remains the authoritative source for device documentation. Supply confirmation should be obtained for the complete ordering code and your planned production volume.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা LPC18S57JBD208E — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose the LPC18S57JBD208E when your embedded product needs the specific combination of a 180 MHz Cortex-M3 core, 1 MB flash, 136 kB SRAM, Ethernet, two high-speed USB interfaces, LCD support, EMC resources, and AES hardware in a 208-pin LQFP. It is particularly suitable for industrial controllers, operator panels, USB instruments, and secure network appliances that need many I/O lines in a single controller. The LPC18S57JBD208 is the closest same-family candidate when its ordering grade meets the production requirement; confirm the suffix meaning and supply status before selecting it. The LPC1857JBD208E retains an Arm Cortex-M3 core and the same broad package class, but it is not a drop-in firmware choice because its peripheral organization differs. Treat it as a redesign candidate unless a complete pin, clock, peripheral, and software comparison proves compatibility.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য LPC18S57JBD208 LPC1857JBD208E
Package LQFP-208 (28 x 28 mm) LQFP-208 (28 x 28 mm) - same LQFP-208 - same package family
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors
Processor Core Arm Cortex-M3 Arm Cortex-M3 Arm Cortex-M3

মূল পার্থক্যসমূহ

  • Direct same-family ordering counterpart (বনামLPC1857JBD208E)
  • Higher integration in the target MCU family (বনামLPC1857JBD208E)
  • Hardware-assisted cryptographic processing (বনামLPC1857JBD208E)

ডিজাইন নোট

Treat the LQFP-208 footprint as a fine-pitch routing problem rather than a generic large-IC layout. Use the NXP package drawing for land dimensions, pin numbering, and recommended board pattern. Preserve a continuous ground reference beneath the device, route high-speed Ethernet and USB pairs as controlled-impedance nets, and place decoupling capacitance at the supply pins. Fanout or via-in-pad strategies can shorten escape routing, but both must be checked against the manufacturer's assembly guidelines.

Partition the supply rails according to the NXP power architecture and the peripherals in use. The MCU core, Ethernet interface, USB interface, and LCD-related circuitry can have different current and filtering requirements even though they share one package. Calculate the worst-case load rather than relying on the operating-frequency figure alone, and include Ethernet PHY startup, USB bus loads, and display backlight requirements in the supply budget. Verify capacitor values, voltage tolerances, and sequencing directly from the manufacturer documentation.

Assign every terminal from the authoritative NXP pin-description table because this 208-pin device combines power, ground, clock, debug, communication, and multiplexed I/O functions. Confirm boot-configuration pins, debug access, crystal or clock connections, and peripheral alternate functions before routing. Keep sensitive analog and high-speed digital interfaces away from noisy loads and provide a clean return path beneath each interface. A mechanically correct footprint alone does not guarantee a functional layout.

The LPC18S57 family includes EMC-related resources, but board-level compliance still depends on the complete design. Keep Ethernet magnetics and external PHY interfaces at the board edge, provide continuous reference planes, and control the impedance of high-speed USB traces. Reserve filtering footprints for common-mode chokes, ferrites, and ESD protection so compliance problems can be addressed without relocating the MCU. Validate radiated and conducted emissions using the final enclosure, cable set, and power configuration.

Do not assume that sharing the same package makes a different-family MCU a firmware-compatible replacement. The LPC1857JBD208E retains the Cortex-M3 architecture but can differ in clocking, pin multiplexing, interrupt organization, peripherals, and startup code. For any substitution, rebuild the device configuration, compare every used pin, review clock-tree and peripheral dependencies, and rerun hardware and firmware regression tests. The LPC18S57JBD208 requires the same ordered review even though it is in the target family.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The device includes EMC-related features, but this is distinct from formal electromagnetic-compliance certification. RoHS, REACH, halogen-free, and conflict-minerals declarations were not stated in the product records and remain unconfirmed. AEC-Q100 is not applicable to this general-purpose microcontroller ordering code.

ডেটা যাচাই করা হয়েছে: 2026-11-15 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

LPC18S57JBD208E datasheet LPC18S57JBD208E specifications LPC18S57JBD208E pinout LPC18S57JBD208E LQFP-208 footprint LPC18S57JBD208E 180MHz Cortex-M3 LPC18S57JBD208E 1MB flash 136kB SRAM LPC18S57JBD208E Ethernet USB application LPC18S57JBD208E vs LPC1857JBD208E LPC18S57JBD208E drop-in replacement NXP LPC18S57JBD208E LPC18S57JBD208E price LPC18S57JBD208E stock and lead time where to buy LPC18S57JBD208E LPC18S57JBD208E schematic reference design LPC18S57JBD208E power consumption

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

NXP Semiconductors LPC18S57JBD208E LPC18S57JBD208 LPC1857JBD208E Arm Cortex-M3 microcontroller MCU 32-bit microcontroller embedded controller Ethernet controller high-speed USB LCD controller AES engine EMC features 1 MB flash memory 136 kB SRAM 180 MHz LQFP-208 28 x 28 mm package 142 I/O lines industrial control building automation network appliance operator panel
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন