NXP Semiconductors

LPC2101FBD48 - 70MHz ARM7 MCU with 8KB Flash | NXP

MPN: LPC2101FBD48 ✓ সক্রিয়
48-LQFP, 7 x 7 mm Package 70 MHz Speed 8 KB Memory
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

LPC2101FBD48 সারাংশ

The NXP Semiconductors LPC2101FBD48 is a 16-bit/32-bit ARM7TDMI-S microcontroller operating at up to 70 MHz, with 8 KB of embedded high-speed flash memory, in a 48-LQFP 7 x 7 mm package. It combines a real-time-capable ARM7 processor core with in-system programming, in-application programming, fast GPIO ports, and an integrated 10-bit ADC.

A microcontroller is a programmable semiconductor device that combines a CPU core, memory, peripherals, and interface logic on one integrated circuit. The LPC2101 belongs to the LPC2100 family, which is part of the broader hierarchy of embedded processors, microcontrollers, and semiconductor components. It is intended for compact control systems where deterministic peripheral access, low component count, and in-circuit programming are valuable.

The principal features of the LPC2101FBD48 include a 70 MHz ARM7TDMI-S core, 8 KB of flash, a 10-bit ADC, fast GPIO ports, and support for ISP and IAP. The 8 KB flash configuration supports compact boot code and embedded control logic without requiring an external program-memory device. Its LQFP-48 package exposes the processor interfaces and peripherals in a conventional surface-mount footprint that is inspectable and compatible with standard PCB assembly methods.

The ARM7TDMI-S architecture combines a 32-bit processing path with a 16-bit instruction set optimized for efficient embedded execution. Real-time emulation support helps developers observe and control program execution during debugging. ISP and IAP capability provides practical options for programming a connected board, while the integrated ADC allows analog measurements to be handled without a separate converter when the application’s input range and accuracy meet its requirements.

Typical uses include industrial control modules, sensor interfaces, compact instrumentation, communication equipment, and embedded control subsystems. The combination of local flash, GPIO, ADC capability, and an ARM-compatible development environment makes the device useful where a small firmware image and moderate processing throughput are sufficient. Designers should size firmware and RAM carefully because this member provides 8 KB of flash, substantially less program storage than higher-capacity members of the LPC2100 family.

PCB implementation requires attention to the 48-LQFP pin arrangement, exposed supply and ground connections, clock stability, and analog-input conditioning. The ADC should be connected only to signals within its input range, and grounding and decoupling should follow the pin-description and recommended-layout guidance in the manufacturer datasheet. Firmware development must also confirm that the toolchain and application requirements remain appropriate for the ARM7TDMI-S architecture.

This product overview organizes the LPC2101FBD48’s core, memory, package, and peripheral characteristics into an engineering-focused reference. It also identifies same-package family options, outlines replacement constraints, and highlights the practical considerations for firmware sizing, ADC use, programming, and PCB implementation.

এর জন্য ড্রপ-ইন বিকল্প LPC2101FBD48 — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible LPC2101FBD48 (একই form factor এবং footprint) — পার্থক্য রয়েছে Product Type, ADC Resolution, Embedded Flash Memory, Flash Organization, Package.

NXP Semiconductors
Product Type: 16-bit/32-bit ARM7TDMI-S microcontroller
ADC Resolution: 10-bit
Embedded Flash Memory: 16 KB
এর সাথে তুলনা করুন LPC2101FBD48 →
NXP Semiconductors
Product Type: 16-bit/32-bit single-chip ARM microcontroller
Package: 48-LQFP (7 x 7 mm)
এর সাথে তুলনা করুন LPC2101FBD48 →

LPC2102FBD48

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
NXP Semiconductors
📦 48-LQFP (7 x 7 mm)
16-bit/32-bit ARM7TDMI-S microcontroller · ARM7TDMI-S 32-bit RISC core · 70 MHz · 16 KB · 16K x 8 · 1.8 V and 3.3 V · 10-bit · In-system programming and in-application programming

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

LPC2103FBD48EL

✅ ড্রপ-ইন
NXP Semiconductors
📦 48-LQFP (7 x 7 mm)
16-bit/32-bit single-chip ARM microcontroller · ARM7TDMI-S · 70 MHz · 32 KB flash (32K x 8) · 8 KB · 10 bits · 8-channel 10-bit SAR · 1.65 V to 1.95 V

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

LPC2101FBD48 সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Product Type 16-bit/32-bit ARM microcontroller
CPU Core ARM7TDMI-S
Maximum CPU Frequency 70 MHz
Embedded Flash Memory 8 KB
Flash Organization 8K x 8 bits
ADC Resolution 10 bits
প্যাকেজ 48-LQFP, 7 x 7 mm
মাউন্টিং টাইপ Surface mount
Programming Support In-system programming and in-application programming
Emulation Support Real-time emulation
GPIO Type Fast GPIO ports
Shipping Package Tape & Reel

LPC2101FBD48 tape & reel পিন কনফিগারেশন গাইড

LPC2101FBD48 (tape & reel প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।

LPC2101FBD48-এর জন্য tape & reel প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি LPC2101FBD48.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

LPC2101FBD48 এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Compact Industrial Control Module, Sensor Interface and Data Acquisition, Embedded Communication Equipment, Battery-Powered Monitoring Device, Programmable Instrumentation Controller, Rapid Prototyping and Education Platform.

🏭

Compact Industrial Control Module

The LPC2101FBD48 fits compact industrial control modules that require a 70 MHz ARM7TDMI-S processor, GPIO control, and a local programming interface. Its 8 KB embedded flash can hold a focused control image, while the integrated 10-bit ADC supports monitoring of suitable analog process signals. The 48-LQFP package also permits inspection after assembly and provides a conventional surface-mount land pattern. Engineering trade-offs include the limited 8 KB code budget and the need to confirm peripheral availability, operating voltage, and timing margins in the manufacturer datasheet before deployment.

🧩

Sensor Interface and Data Acquisition

The LPC2101FBD48 is appropriate for sensor-interface and data-acquisition modules that combine digital control with limited analog measurement. Its 10-bit ADC can sample input signals within the device’s specified electrical range, while fast GPIO ports support digital sensors, interrupt inputs, and status signaling. The 70 MHz ARM7TDMI-S core provides enough throughput for modest filtering, control, and communication tasks without a separate processor. Designers should budget firmware within the 8 KB flash limit and apply appropriate input conditioning, grounding, and decoupling according to the manufacturer datasheet.

🌐

Embedded Communication Equipment

The LPC2101FBD48 can serve as the control processor in compact communications equipment where a small ARM7TDMI-S system, GPIO connectivity, and in-circuit programming are required. ISP and IAP support simplifies firmware deployment and field updates, while the 70 MHz operating rate can manage protocol processing, status logic, and low-speed serial interfaces. The main constraint is program storage: an 8 KB flash configuration requires disciplined code organization and a reviewed linker map. Peripheral multiplexing, interrupt priorities, and signal-level requirements must be verified directly from the manufacturer datasheet.

⚡

Battery-Powered Monitoring Device

The LPC2101FBD48 fits low-power monitoring devices that need local control, digital sensing, and occasional firmware updates without external program memory. Its integrated flash stores a compact application, and ISP/IAP capability supports controlled deployment through the device’s programming interface. The 70 MHz core allows short, deterministic control tasks, while the 10-bit ADC can support suitable sensor signals. Designers must verify active current, sleep behavior, clock requirements, and analog input limits in the manufacturer datasheet, since those operating characteristics must be established before the device is selected for a battery-powered design.

🔧

Programmable Instrumentation Controller

The LPC2101FBD48 is suitable for a compact instrumentation controller built around configuration storage, digital I/O, and low-resolution analog measurement. The 8 KB flash stores setup values, calibration logic, and a compact control program, while the ARM7TDMI-S core supports deterministic sequencing and real-time emulation during development. The 10-bit ADC can reduce system complexity when its input range and conversion performance satisfy the measurement design. For production firmware, engineers should review the final code size and preserve memory margin for future updates and boot behavior.

🖥️

Rapid Prototyping and Education Platform

The LPC2101FBD48 supports microcontroller learning, embedded-systems courses, and rapid hardware prototyping because it combines an ARM7TDMI-S processor, 8 KB embedded flash, GPIO, a 10-bit ADC, and real-time emulation in one package. ISP and IAP functions simplify program loading and updates on a prototype board, while the 48-LQFP form remains accessible for manual wiring and inspection. Developers should select a compatible ARM7TDMI-S toolchain and avoid placing demonstration code that exceeds the 8 KB flash budget; use the same-package family options only after validating the increased memory impact.

What are the key specifications of LPC2101FBD48 that engineers should know?
The LPC2101FBD48 is a 70 MHz ARM7TDMI-S microcontroller with 8 KB of flash, a 10-bit ADC, ISP and IAP support, and a 48-LQFP 7 x 7 mm package. According to the NXP product page and manufacturer datasheet, it is designed for compact embedded-control applications requiring a 16-bit/32-bit processor, fast GPIO ports, and on-chip programming capability.
What type of microcontroller is the LPC2101FBD48?
The LPC2101FBD48 is a 16-bit/32-bit ARM7TDMI-S microcontroller from NXP Semiconductors. The manufacturer product page describes an embedded processor operating at up to 70 MHz with real-time emulation, while the LPC2100 family combines the processor with embedded high-speed flash, fast GPIO ports, a 10-bit ADC, and ISP/IAP functions.
How much flash memory does LPC2101FBD48 contain?
The LPC2101FBD48 contains 8 KB of embedded high-speed flash memory, organized as 8K x 8 bits. According to the NXP product information, this is the smallest flash configuration in the LPC2101/2102/2103 family, whose members provide 8 KB, 16 KB, or 32 KB options.
What is the maximum operating frequency of LPC2101FBD48?
The LPC2101FBD48 supports a maximum CPU frequency of 70 MHz. According to the NXP product information, the device uses an ARM7TDMI-S core that combines 16-bit and 32-bit execution with real-time emulation for embedded debugging and control.
Where can I download the LPC2101FBD48 datasheet PDF?
The official LPC2101FBD48 product information and datasheet can be accessed through the NXP product page at https://www.nxp.com/part/LPC2101FBD48. Use the manufacturer’s pin-description table and electrical characteristics to assign PCB tracks and confirm operating limits before beginning a new design.
Where can I find the LPC2101FBD48 pinout?
The LPC2101FBD48 pinout is defined in the NXP manufacturer datasheet and the package documentation for its 48-LQFP 7 x 7 mm package. Use the pin-description table when assigning power, ground, clock, reset, GPIO, and ADC signals; do not infer unnamed pins from another package or series member.
Does LPC2101FBD48 include an ADC?
Yes, the LPC2101FBD48 includes a 10-bit ADC. According to the manufacturer datasheet description, the LPC2101/2102/2103 family combines embedded flash with ISP/IAP, fast ports, and a 10-bit ADC, allowing suitable analog inputs to be measured without adding a separate converter.
What can replace the LPC2101FBD48 in an existing design?
A direct replacement must retain the 48-LQFP footprint, pin functions, voltage compatibility, memory organization, and peripheral requirements. LPC2103FBD48 is a same-package family candidate with the same ARM7 architecture but 32 KB rather than 8 KB of flash, so firmware and boot behavior must be checked before treating it as a drop-in substitution.
Can LPC2103FBD48 replace LPC2101FBD48?
The LPC2103FBD48 can be considered for a hardware-compatible redesign after validation, but it is not a memory-identical substitute. Both use the 48-LQFP family arrangement and ARM7TDMI-S architecture, while flash increases from 8 KB to 32 KB; the manufacturer datasheets should be compared pin by pin.
When should I choose LPC2101FBD48 over LPC2103FBD48?
Choose LPC2101FBD48 when 8 KB of flash is sufficient and a smaller program-memory footprint simplifies the firmware budget. Choose LPC2103FBD48 when the application requires more embedded flash; it retains the ARM7TDMI-S execution model and 48-LQFP package family while increasing flash from 8 KB to 32 KB.
Is LPC2101FBD48 suitable for a compact industrial controller?
The LPC2101FBD48 is suitable for a compact controller when its 8 KB flash budget, 70 MHz CPU rate, GPIO resources, and 10-bit ADC resolution meet the application. According to the NXP product page, the part supports ISP, IAP, and real-time emulation, making it useful for locally programmable industrial control and monitoring modules.
What is the difference between LPC2101FBD48 and LPC2101FBD48,151?
The LPC2101FBD48,151 designation identifies the tape-and-reel ordering form of the LPC2101FBD48 device, while both identify the same 70 MHz, 8 KB-flash ARM7TDMI-S MCU and 48-LQFP package. Confirm the manufacturer ordering information, reel quantity, and termination code against the PCB assembly requirements.
How should firmware be sized for LPC2101FBD48?
The firmware image must fit within the device’s 8 KB embedded flash while leaving room for boot code, application code, constants, and any update data. Because higher-capacity LPC2100 members provide 16 KB or 32 KB, engineers should review the final linker map and avoid assuming the memory capacity of those variants.
What development tools are compatible with LPC2101FBD48?
The LPC2101FBD48 requires software that supports the ARM7TDMI-S architecture and the LPC2100 peripheral set. The NXP product information confirms real-time emulation, while the manufacturer datasheet documents the programming and debug interfaces; select a toolchain whose flash programming algorithm and debugger support this exact device.
Where can I buy LPC2101FBD48 and what is its current lead time?
Use the Request a Quote form on this page to request LPC2101FBD48 availability, current lead time, and minimum order quantity. The manufacturer product page identifies the device, while procurement should confirm reel quantity, date code, and shipment configuration in the quotation response.
What is the price and stock status of LPC2101FBD48?
Use the Request a Quote form on this page for the current LPC2101FBD48 price, stock position, and lead time. Quotations should specify the exact 48-LQFP ordering configuration and reel quantity so that the supplied device, documentation, and delivery schedule match the intended assembly process.
Is LPC2101FBD48 in stock?
Current inventory should be confirmed through the Request a Quote form on this page. The request should include the required LPC2101FBD48 package configuration, reel quantity, and target delivery date, allowing procurement to return a current stock and scheduling answer.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা LPC2101FBD48 — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose LPC2101FBD48 for a compact ARM7 control design whose firmware comfortably fits within 8 KB of embedded flash. Its 70 MHz ARM7TDMI-S core, 10-bit ADC, GPIO, ISP, and IAP provide a capable platform for small monitoring, control, and instrumentation tasks. Choose LPC2102FBD48 when the application needs 16 KB of flash or requires additional firmware margin while retaining the same family architecture and package arrangement. Choose LPC2103FBD48 when 32 KB of flash is useful for larger communication stacks, boot features, or future expansion. Treat either family option as a redesign candidate until the complete pin list, operating limits, boot behavior, firmware linkage, and peripherals have been checked against the manufacturer datasheets.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য LPC2102FBD48 LPC2103FBD48
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors
Package 48-LQFP (7 x 7 mm) 48-LQFP (7 x 7 mm) 48-LQFP (7 x 7 mm)
CPU Core ARM7TDMI-S ARM7TDMI-S ARM7TDMI-S
Maximum CPU Frequency 70 MHz 70 MHz 70 MHz
Embedded Flash Memory 8 KB 16 KB 32 KB
ADC Resolution 10 bits 10 bits 10 bits
Programming Support ISP and IAP ISP and IAP ISP and IAP
Real-Time Emulation Supported Supported Supported
GPIO Fast GPIO ports Fast GPIO ports Fast GPIO ports

মূল পার্থক্যসমূহ

  • Lowest flash capacity within the compared LPC2100 family (বনামLPC2102FBD48)
  • Substantially smaller program-memory requirement than the 32 KB family option (বনামLPC2103FBD48)
  • Common high-performance ARM7TDMI-S execution platform (বনামLPC2103FBD48)

ডিজাইন নোট

Route the clock, reset, programming signals, and sensitive analog inputs according to the manufacturer’s recommended layout. Place decoupling capacitors close to their associated supply pins, provide a continuous ground reference beneath the device where practical, and keep switching-node copper away from ADC inputs. The LQFP-48 footprint should be checked against the package drawing for pad dimensions, exposed thermal requirements, and assembly clearances.

Confirm the operating-voltage range and current limits for every operating mode before selecting the power supply. The LPC2101FBD48 combines digital processing and an ADC, so the design must maintain valid levels on all powered pins while preventing transient excursions at the 48-LQFP connections. Use the manufacturer electrical-characteristics tables to set supply tolerance, power sequencing, and decoupling requirements.

Do not assume that LPC2101/2102/2103 firmware is interchangeable merely because the devices share the ARM7TDMI-S architecture and 48-LQFP family package. The flash capacity changes from 8 KB to 16 KB or 32 KB, and a valid substitution must be checked for boot behavior, linker output, peripheral configuration, timing, and any application assumptions about available code space.

Treat analog and digital return currents separately where the board topology permits. Connect analog grounds through a deliberate network, keep ADC traces short, and use stable reference and supply arrangements. Verify the ADC input range, acquisition behavior, and recommended source impedance in the manufacturer datasheet; these details are essential when converting sensor outputs into reliable measurements.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

Compliance status requires confirmation from the manufacturer’s current product documentation or declaration.

ডেটা যাচাই করা হয়েছে: 2026-11-15 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

LPC2101FBD48 datasheet LPC2101FBD48 pinout LPC2101FBD48 datasheet pdf LPC2101FBD48 equivalent LPC2101FBD48 replacement LPC2101FBD48 cross reference LPC2101FBD48 price LPC2101FBD48 stock NXP LPC2101FBD48 LPC2101FBD48 LQFP-48 pinout LPC2101FBD48 ARM7TDMI-S LPC2101FBD48 8KB flash LPC2101FBD48 vs LPC2103FBD48 LPC2101FBD48 application circuit

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

NXP Semiconductors LPC2101FBD48 LPC2102FBD48 LPC2103FBD48 LPC2101FBD48,151 ARM7TDMI-S ARM7 microcontroller embedded microcontroller 32-bit processor 16-bit processor embedded flash memory 8 KB flash 10-bit ADC in-system programming in-application programming real-time emulation fast GPIO ports 48-LQFP LQFP-48 surface mount embedded control industrial control sensor interface instrumentation
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন