MAX118CAI+ - 8-Channel 8-Bit 1Msps ADC | Maxim Integrated
MPN: MAX118CAI+ ✓ সক্রিয়MAX118CAI+ সারাংশ
An ADC is an analog-to-digital converter, a semiconductor interface that transforms continuously varying analog voltages into numerical values suitable for digital processing. The MAX118 belongs to the parallel-interface ADC family within the broader data-converter and signal-processing semiconductor hierarchy. It is intended for systems where multiple analog inputs must be measured quickly, but higher resolution is not required. The MAX118 family is particularly suitable for industrial monitoring, control systems, data acquisition, and embedded instrumentation where a parallel bus simplifies connection to a processor.
The MAX118CAI+ combines a 1 Msps sampling rate with an 8-bit resolution, producing 256 possible output codes for each channel. Its half-flash architecture is designed to provide microprocessor-compatible operation and faster conversion than traditional successive-approximation converters of the same general class. The eight-channel arrangement allows one ADC package to monitor multiple sensors or control points, reducing component count and simplifying firmware addressing.
Power management is an important feature of this converter. The active-low PWRDN pin allows the system to place the ADC into a low-current state when measurements are not required. Typical power-down current is 1 µA, and the device can resume normal operation in less than 200 ns. This combination supports portable and intermittently sampled equipment while limiting standby power consumption.
Typical applications include process-control loops, factory automation, digital panel meters, data-acquisition systems, battery-operated instruments, and embedded control platforms. The 28-pin SSOP package is useful for designs requiring a through-hole-compatible surface-mount footprint and straightforward routing to a microprocessor bus. Designers should provide a stable +5 V supply, observe the manufacturer’s input-voltage limits, account for analog signal conditioning, and ensure that the parallel output timing is compatible with the host processor.
This page combines the verified manufacturer and distributor information for MAX118CAI+ with package, application, comparison, and design guidance intended to support practical engineering selection.
এর জন্য ড্রপ-ইন বিকল্প MAX118CAI+ — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
MAX118EAI+T
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
MAX118CAI
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
MAX118CAI+ সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Product Type | 8-bit analog-to-digital converter |
| রেজোলিউশন | 8 bits |
| Number of Analog Inputs | 8 single-ended inputs |
| স্যাম্পলিং রেট | 1 Msps |
| Conversion Time | 660 ns |
| Conversion Architecture | Half-flash |
| সাপ্লাই ভোল্টেজ | +5 V single supply |
| Power-Down Current | 1 µA typical |
| Power-Down Control | Active-low PWRDN pin |
| Power-Down Recovery Time | Less than 200 ns |
| Output Interface | Parallel microprocessor-compatible output |
| Input Type | Single-ended |
| প্যাকেজ | 28-pin SSOP |
| Terminal Count | 28 pins |
| Package Type | Rectangular gull-wing SSOP |
| Commercial Temperature Grade | Commercial |
MAX118CAI+ rectangular gull-wing ssop পিন কনফিগারেশন গাইড
MAX118CAI+ (rectangular gull-wing ssop প্যাকেজ)-এর পিন কনফিগারেশন। এই অ্যানালগ কম্পোনেন্টে ইনপুট, আউটপুট ও পাওয়ার সাপ্লাই পিন রয়েছে। অফসেট নাল, কম্পেনসেশন ও এনেবল পিন কনফিগারেশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। সিগন্যাল কন্ডিশনিং ও অ্যামপ্লিফায়ার সার্কিটের জন্য আদর্শ।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি MAX118CAI+.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
MAX118CAI+ এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Process Monitoring, Data Acquisition Systems, Embedded Control Platforms, Digital Panel Meters, Portable Measurement Instruments, Control Signal Monitoring.
Industrial Process Monitoring
The MAX118CAI+ fits industrial process monitoring because it combines eight single-ended analog inputs with a 1 Msps conversion rate in one 28-pin SSOP package. A controller can sample multiple pressure, temperature, level, or valve-position signals without requiring eight separate converters. The 660 ns half-flash conversion time supports rapid updates, while the active-low PWRDN input can reduce consumption during idle intervals. Analog front-end conditioning, grounding, and isolation remain system-level responsibilities.
সুপারিশকৃত
Data Acquisition Systems
For data-acquisition systems, the MAX118CAI+ provides eight analog channels, 8-bit digital resolution, and up to 1 Msps sampling in a parallel-output architecture. It is useful where a processor or controller must acquire several changing inputs over a short acquisition interval. The 256-code output resolution is appropriate for supervisory, status, and trend measurements rather than precision laboratory analysis. The host processor must accommodate the parallel output timing and provide suitable analog buffering where required.
সুপারিশকৃত
Embedded Control Platforms
The MAX118CAI+ is appropriate for embedded control platforms that monitor multiple actuator or sensor states using a microprocessor-compatible bus. Its eight single-ended inputs reduce the number of external conversion channels, while the parallel output can simplify direct host-controller interfacing. A 1 Msps conversion rate provides responsiveness for control and monitoring loops. The active-low shutdown function supports duty-cycled operation, and designers should account for bus timing, input settling, and digital signal integrity when assigning processor I/O.
সুপারিশকৃত
Digital Panel Meters
The MAX118CAI+ can serve as the input converter in a digital panel meter that displays several process variables. Eight single-ended inputs allow one device to cover multiple analog gauges, while the 8-bit resolution and 1 Msps rate support rapidly refreshed numerical readings. Its power-down capability is valuable in portable or battery-operated meters where the display and converter do not need continuous operation. Calibration, input protection, and reference accuracy will strongly influence the usefulness of the 8-bit measurement result.
সুপারিশকৃত
Portable Measurement Instruments
The MAX118CAI+ is suitable for portable measurement instruments because it combines eight input channels with a typical 1 µA power-down current and recovery in less than 200 ns. The system can leave the converter disabled between measurement bursts and restore operation quickly when data is required. The single +5 V supply simplifies power architecture compared with dual-supply converters. Low standby current does not by itself determine battery life, so the complete instrument must also account for display, processor, sensor, and analog-conditioning consumption.
সুপারিশকৃত
Control Signal Monitoring
The MAX118CAI+ can monitor eight control or status signals where a controller needs regularly updated digital representations of analog levels. Inputs may represent potentiometer positions, command voltages, sensor outputs, or supply-derived status signals, subject to the device’s specified operating range. The 660 ns conversion time and 1 Msps rate allow closely spaced measurements, while the parallel interface allows a host processor to retrieve results directly. Conditioning and input protection should be added whenever external wiring can introduce transients or out-of-range voltages.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা MAX118CAI+ — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | MAX118EAI+T | MAX118CAI |
|---|---|---|---|
| Package | 28-pin SSOP | 28-pin SSOP | 28-pin SSOP |
| Brand | Maxim Integrated | Maxim Integrated | Maxim Integrated |
| Resolution | 8 bits | 8 bits | 8 bits |
| Analog Input Channels | 8 single-ended inputs | 8 single-ended inputs | 8 single-ended inputs |
| Sampling Rate | 1 Msps | 1 Msps | 1 Msps |
| Conversion Time | 660 ns | 660 ns | 660 ns |
| Supply Voltage | +5 V single supply | +5 V single supply | +5 V single supply |
| Conversion Architecture | Half-flash | Half-flash | Half-flash |
| Output Interface | Parallel microprocessor-compatible output | Parallel | Parallel |
| Power-Down Current | 1 µA typical | 1 µA typical | 1 µA typical |
মূল পার্থক্যসমূহ
- Eight-channel integration (বনামMAX1112CAP+)
- Parallel 1 Msps conversion (বনামADC0838CIWMX/NOPB)
- Verified low-power shutdown behavior (বনামMAX118EAI+T)
ডিজাইন নোট
Do not treat the identical SSOP-28 package as proof that every replacement is electrically interchangeable. Compare the manufacturer pin function table, absolute maximum ratings, input range, reference arrangement, and power-up behavior for MAX118CAI+ and MAX118EAI+T. The supplied web comparison confirms the principal architecture, interface, and package, but ordering-code temperature and commercial details still require verification against the current datasheet before a substitution is released.
Use the active-low PWRDN input to place the MAX118CAI+ into its verified 1 µA-typical shutdown state only after confirming the host logic voltage and pin behavior from the manufacturer datasheet. The converter is specified to return to normal operation in less than 200 ns, making short duty cycles practical. Keep the supply stable during startup and wake-up because a rapidly enabled converter can expose input settling, reference settling, and bus timing problems that are hidden in slow-start laboratory tests.
Route the analog inputs and reference connections away from the parallel digital output and clock-sensitive traces. Place input-conditioning components close to the relevant MAX118CAI+ pins and maintain a compact ground return for the analog section. The parallel bus can switch several outputs simultaneously, so board-level return paths should be designed to limit coupling into the eight analog channels. Confirm the recommended layout and reference connection in the manufacturer datasheet before finalizing the PCB.
কমপ্লায়েন্স তথ্য
The supplied verified web results identify the MAX118CAI+ as a commercial-grade MAX118 device but do not provide explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statements. These fields remain unknown rather than being inferred.