MAX120ENG+ - 12-Bit 500ksps SAR ADC | Maxim Integrated
MPN: MAX120ENG+ ✓ সক্রিয়MAX120ENG+ সারাংশ
An ADC is an analog-to-digital converter, a semiconductor that samples a continuous analog voltage and converts it into a numeric code for processing or storage. Within the data-converter hierarchy, the MAX120ENG+ is a single-channel SAR ADC. Successive approximation compares the sampled input against an internal trial DAC and internal reference until the conversion reaches its specified resolution. This architecture provides predictable sampling behavior for control and measurement systems without the complexity of a continuously operating high-speed converter.
The MAX120ENG+ converts single-ended analog input signals into 12-bit digital words. Its 500 ksps maximum conversion rate provides 2 microseconds per conversion before acquisition overhead. The 24-pin PDIP package is intended for through-hole PCB assembly and offers generous spacing between pins for hand soldering, prototyping, inspection, and applications using standard perforated-board construction.
The MAX120E family combines a 12-bit SAR conversion core with parallel digital output and integrated reference circuitry. Parallel data access avoids the serial-interface overhead associated with many mixed-signal converters. A parallel bus can also simplify connections to older processors, FPGA interfaces, latch arrays, or dedicated data-capture logic, provided the timing of acquisition, conversion, and data transfer is coordinated correctly.
Typical uses include industrial process monitoring, laboratory measurement equipment, sensor signal acquisition, embedded control systems, waveform sampling, and closed-loop control. The single-channel architecture is particularly appropriate when one analog quantity must be sampled with high conversion throughput. Multiplexed systems can also use the converter when switching the analog source externally, although the multiplexer settling time must be allowed before each acquisition.
PCB design should keep the analog input path short and isolate it from digital output and clock activity. Place input filtering and reference-decoupling components near the relevant device pins, provide a stable ground reference, and route high-current outputs away from the analog input. Because the converter uses a parallel interface, confirm signal direction, acquisition timing, and bus contention against the manufacturer pin-description table before finalizing the schematic.
This product page combines the verified device specifications, package details, sourcing guidance, equivalent-part analysis, and practical PCB guidance into one engineering-focused reference. It also distinguishes true PDIP-24 alternatives from parts that may be functionally similar but do not establish the same board-level replacement requirement.
এর জন্য ড্রপ-ইন বিকল্প MAX120ENG+ — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই সিরিজের ভ্যারিয়েন্ট
একই সিরিজের মডেল যেগুলো drop-in compatible MAX120ENG+ (একই form factor এবং footprint) — পার্থক্য রয়েছে Input Type, Track and Hold.
MAX120CNG+
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →MAX122BENG+
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
MAX1271BENG+
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
MAX172AENG+
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
MAX120ENG+ সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| ADC Type | Successive-approximation ADC |
| রেজোলিউশন | 12 bit |
| Number of Input Channels | 1 channel |
| Input Type | Single-ended |
| Maximum Sampling Rate | 500 ksps |
| Conversion Time at Maximum Rate | 2 us |
| Data Output Type | Parallel word access |
| Digital Output Width | 12 bit |
| Process Technology | BiCMOS |
| Reference Type | Internal |
| Track and Hold | Track-and-hold input |
| প্যাকেজ | 24-pin PDIP |
| পিনের সংখ্যা | 24 pins |
| মাউন্টিং স্টাইল | Through-hole |
| Temperature Grade | Industrial |
MAX120ENG+ 24-pin pdip পিন কনফিগারেশন গাইড
MAX120ENG+ (24-pin pdip প্যাকেজ)-এর পিন কনফিগারেশন। এই অ্যানালগ কম্পোনেন্টে ইনপুট, আউটপুট ও পাওয়ার সাপ্লাই পিন রয়েছে। অফসেট নাল, কম্পেনসেশন ও এনেবল পিন কনফিগারেশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। সিগন্যাল কন্ডিশনিং ও অ্যামপ্লিফায়ার সার্কিটের জন্য আদর্শ।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি MAX120ENG+.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
MAX120ENG+ এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Process Monitoring, Sensor Signal Acquisition, Laboratory Measurement Equipment, Embedded Control Systems, Waveform and Transient Sampling, Data Acquisition Modules.
Industrial Process Monitoring
The MAX120ENG+ is appropriate for acquiring a single industrial process variable when 12-bit resolution and a 500 ksps conversion rate provide sufficient speed. Place the converter behind an input-conditioning network that converts the sensor or transmitter output into a voltage within the ADC input range. The 2 microsecond conversion interval at 500 ksps allows rapid sampling, while the parallel output can feed a processor, FPGA interface, or capture register. Because the device has one single-ended input, external multiplexing can expand channel count, but each selected source must settle for the acquisition time specified by the manufacturer.
সুপারিশকৃত
Sensor Signal Acquisition
The MAX120ENG+ suits sensors that require more frequent conversion than a slow general-purpose ADC but do not demand resolution beyond 12 bits. Its single-ended input, internal reference, and track-and-hold function form the core of a straightforward acquisition channel. Place the transducer interface, anti-alias filter, and input conditioning close to the converter to limit noise pickup. The 500 ksps maximum rate produces one 12-bit sample every 2 microseconds under ideal conversion timing, while the parallel bus provides direct access to the acquisition and processing logic.
সুপারিশকৃত
Laboratory Measurement Equipment
The MAX120ENG+ can serve as the acquisition converter in laboratory instruments that measure one analog channel and require deterministic parallel data transfer. Its 12-bit resolution provides 4096 code levels, while the 500 ksps rate supports waveform and event sampling beyond the needs of many slowly changing measurements. The internal reference reduces the number of external reference components, although precision analog measurements still require careful grounding, input buffering, and filtering. The 24-pin PDIP package is particularly convenient for instrument prototypes built on perforated board.
সুপারিশকৃত
Embedded Control Systems
The MAX120ENG+ fits embedded controllers that need periodic feedback from an analog sensor and can accommodate a parallel interface. Its 500 ksps capability is more than adequate for many motor, thermal, pressure, and position control loops, while 12-bit resolution supports moderate control precision. The through-hole PDIP-24 package simplifies prototype assembly and rework. Interface the parallel outputs through appropriately buffered logic when the converter is not located next to the controller, and account for output timing so that the processor reads stable data after conversion.
সুপারিশকৃত
Waveform and Transient Sampling
The MAX120ENG+ is suitable for repetitive waveform sampling when each sample must be represented by 12 bits and converted at up to 500 ksps. A sample period of 2 microseconds gives a theoretical maximum signal bandwidth of 250 kHz before allowing for acquisition and transfer overhead, so the usable bandwidth will be lower in a practical system. The track-and-hold input and parallel output help preserve a direct sampling path. Use an anti-alias filter, stable triggering, and memory logic that captures each output word without contending with the next conversion.
সুপারিশকৃত
Data Acquisition Modules
The MAX120ENG+ supports compact single-channel data-acquisition modules that expose a 12-bit sample stream to a host processor. Its parallel output can connect to a latch, FPGA, or microcontroller input bank, while the internal reference and track-and-hold function simplify the front end. The PDIP-24 format supports through-hole assembly, making it practical for educational, industrial monitoring, and legacy control modules. For multi-channel instruments, place a suitable multiplexer ahead of the input and honor the converter's acquisition interval during source switching.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা MAX120ENG+ — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | MAX120CNG+ | MAX122BENG+ | MAX1271BENG+ | MAX172AENG+ |
|---|---|---|---|---|---|
| Package | PDIP-24 | PDIP-24 | PDIP-24 | PDIP-24 | PDIP-24 |
| Brand | Maxim Integrated | Maxim Integrated | Maxim Integrated | Maxim Integrated | Maxim Integrated |
| Resolution | 12 bit | 12 bit | 12 bit | 12 bit | 12 bit |
| Mounting Style | Through-hole | Through-hole | Through-hole | Through-hole | Through-hole |
মূল পার্থক্যসমূহ
- Direct 24-pin PDIP board compatibility (বনামMAX120CNG+)
- Higher sampling capability than the generic comparator context (বনামMAX122BENG+)
- Single-channel simplified acquisition architecture (বনামMAX1271BENG+)
- Parallel output simplifies direct acquisition interfaces (বনামMAX172AENG+)
ডিজাইন নোট
Route the single-ended analog input directly to the MAX120ENG+ and keep the path short and away from the 12 parallel output lines. Place the source impedance, anti-alias filter, and any input buffer close to the converter. A long input trace can behave as an antenna and allow switching-node energy to appear directly in the conversion result.
Do not treat the stated 500 ksps rate as a guaranteed complete sample rate without accounting for acquisition, conversion, and output-transfer intervals. The 2 microfigure conversion interval does not include every system overhead. If an external multiplexer is used, allow its settling time before the track-and-hold acquisition begins and verify the resulting total sampling period against the application timing.
Use the manufacturer application circuit as the basis for input, reference, and bypass-capacitor placement. Connect decoupling components close to their associated pins with short ground returns. Maintain a continuous analog-ground path beneath or near the converter and separate noisy digital return currents from the input reference to reduce conversion error and digital coupling.
The parallel output bus can expose timing skew, ringing, or contention if routed incorrectly. Keep output traces short where possible, match signal lengths when the receiving device has a narrow setup window, and avoid connecting two devices to the same output bus simultaneously. Confirm acquisition, conversion-complete, and data-valid timing against the manufacturer datasheet before setting processor read-control sequencing.
Design the analog and digital supply paths so converter switching currents do not share a narrow return segment with the input reference. Use local bypass capacitance and provide clean supply distribution at the device pins. The exact supply voltage, current, power dissipation, and allowable ripple must be established from the manufacturer electrical-characteristics table before final rail selection.
কমপ্লায়েন্স তথ্য
The target-specific compliance status is not stated in the manufacturer product information. RoHS status shown for MAX1271BENG+ in comparison material is not transferred to the MAX120ENG+. This industrial ADC is not identified as an AEC-Q100-qualified automotive device.