MAX14803AEWZ+T - 16-Channel High-Voltage SPST Switch | ADI
MPN: MAX14803AEWZ+T ✓ সক্রিয়MAX14803AEWZ+T সারাংশ
An analog switch is a semiconductor interface that connects or discloses signal paths under digital control. The MAX14803A belongs to the broader analog-switch, interface-IC, and semiconductor hierarchy. Its 16-channel architecture consolidates multiple high-voltage switching functions into one compact device, reducing routing complexity in systems that require repeated connection and isolation of external analog nodes.
The device uses Maxim's HVCMOS process technology and includes a digital interface, an internal 16-bit shift register, and a programmable latch with enable control. These functions allow switch states to be loaded sequentially and then held. Low charge injection makes the part particularly useful when controlled transitions must introduce limited unwanted signal into a sensitive measurement or drive path. The stated on-resistance is 48 ohm, while turn-on and turn-off times are each 3500 ns.
The MAX14803A family targets ultrasonic-imaging and printer systems where many high-voltage channels must be scanned or routed. Its 5.5 V maximum supply supports low-voltage control systems, while the switched nodes are intended for higher-voltage external signals. The integrated 16-bit shift register simplifies multi-channel state management, although system timing must account for the 3500 ns switching interval and any external signal conditioning.
Typical applications include medical ultrasound receivers, industrial ultrasonic transducers, printer and printhead signal routing, test and measurement systems, and multichannel high-voltage interface boards. In these systems, the device can reduce the number of discrete relays or lower-cost discrete switch networks while retaining coordinated state loading. Medical-system designs still require application-specific isolation, protection, leakage, and safety validation.
For PCB implementation, route controlled high-voltage nodes to minimize coupling into adjacent precision signals and keep the digital interface traces away from sensitive analog inputs. Use the manufacturer's pin-description table when assigning lands and ensure that the WLP assembly process accommodates the compact 5.4 mm by 5.8 mm footprint. Verify external overvoltage, transients, and load capacitance because those conditions govern practical switching reliability.
This page combines the principal electrical ratings, family-level architecture, application fit, and practical integration considerations for the MAX14803AEWZ+T. It is intended to help engineers narrow the device for ultrasound, printer, and multichannel high-voltage switching designs before completing footprint, timing, protection, and qualification checks.
এর জন্য ড্রপ-ইন বিকল্প MAX14803AEWZ+T — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
MAX14802AEWZ+T
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
MAX14803AEWZ+
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
MAX14803AEWZ
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
MAX14803AEWZ-T
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
MAX14803A
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
MAX14803AEWZ+T সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Number of Channels | 16 channels |
| Switch Configuration | 1:1 SPST |
| On-Resistance | 48 ohm |
| Supply Voltage Range | 2.7 V to 5.5 V |
| Turn-On Time | 3500 ns |
| Turn-Off Time | 3500 ns |
| Isolation Voltage | 50 dB |
| অপারেটিং তাপমাত্রার পরিসর | -40 C to +85 C |
| Process Technology | HVCMOS |
| Internal Control Register | 16-bit shift register |
| Latch Control | Programmable latch with enable |
| Charge Injection | Low charge injection |
| প্যাকেজ | 110-WLP, 5.4 mm x 5.8 mm |
| Package Type | Wafer-level package |
| মাউন্টিং টাইপ | Surface mount |
MAX14803AEWZ+T wafer-level package পিন কনফিগারেশন গাইড
MAX14803AEWZ+T (wafer-level package প্যাকেজ)-এর পিন কনফিগারেশন। পিন নম্বরিং, ফাংশন এবং সংযোগ ডায়াগ্রাম প্রস্তুতকারকের ডেটাশিটে সংজ্ঞায়িত করা আছে। সঠিক ফুটপ্রিন্ট এবং সোল্ডারিং নির্দেশিকার জন্য এটি দেখুন।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি MAX14803AEWZ+T.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
MAX14803AEWZ+T এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Medical Ultrasound Receive Channels, Industrial Ultrasonic Transducer Routing, Printer and Printhead Signal Routing, High-Voltage Test and Measurement Interface, Low-Voltage-Controlled High-Voltage Systems, Precision Signal-Integrity Control.
Medical Ultrasound Receive Channels
The MAX14803AEWZ+T fits multichannel medical ultrasound reception because it combines 16 high-voltage SPST switches with low charge injection and a 48 ohm on-resistance. The 16-bit shift register and programmable latch allow receive-channel states to be loaded as a coordinated group, reducing the number of discrete routing elements around the transducer interface. Its 3500 ns turn-on and turn-off times must fit the acquisition timing budget, while the -40 C to +85 C operating range supports many medical-equipment environments. External transient protection, patient-isolation architecture, leakage review, and application-specific medical qualification remain mandatory.
সুপারিশকৃত
Industrial Ultrasonic Transducer Routing
For industrial ultrasonic test systems, the MAX14803AEWZ+T can route multiple transducer channels through a shared signal path using its 16 independent 1:1 SPST switches. The 48 ohm on-resistance provides a defined basis for signal-loss budgeting, and the internal shift register simplifies coordinated state changes across the array. The 2.7 V to 5.5 V supply range allows direct coordination with common low-voltage control electronics. Designers should budget 3500 ns for each switching transition, protect high-voltage nodes from industrial transients, and keep the compact WLP layout clear of sources of vibration or mechanical stress.
সুপারিশকৃত
Printer and Printhead Signal Routing
The MAX14803AEWZ+T suits printer and printhead systems that require repeated routing of multiple drive or feedback nodes. Its 16-channel architecture consolidates switching functions in a 5.4 mm by 5.8 mm 110-WLP, potentially reducing board area compared with discrete relay networks. Low charge injection helps limit unwanted signal steps when control states change, while the 48 ohm on-resistance must be included in the load and attenuation analysis. Timing around the 3500 ns turn-on and turn-off specifications should be synchronized with the print sequence and external driver circuitry.
সুপারিশকৃত
High-Voltage Test and Measurement Interface
The MAX14803AEWZ+T can provide a compact switching interface in test and measurement equipment that must connect several high-voltage nodes to a common instrument channel. Its 16 SPST switches, 50 dB specified isolation, and programmable latch enable facilitate repeatable scan patterns under digital control. The 48 ohm path resistance and 3500 ns switching times should be included in the complete measurement-timing and error budget. Because isolation and voltage ratings have detailed test conditions, engineers must use the manufacturer datasheet for channel-by-channel limits before applying the device to safety-critical measurement boundaries.
সুপারিশকৃত
Low-Voltage-Controlled High-Voltage Systems
The MAX14803AEWZ+T is appropriate when a system uses 2.7 V to 5.5 V control electronics to operate external high-voltage switched nodes. HVCMOS process technology, a digital shift register, and a programmable latch provide integrated control of 16 SPST paths without requiring a separate relay driver for every channel. The compact WLP helps reduce board area, but it also makes assembly planning and thermal-path design more demanding than a leaded package. Correct use requires separating sensitive logic from high-energy routing and validating every external node against the absolute maximum ratings in the manufacturer datasheet.
সুপারিশকৃত
Precision Signal-Integrity Control
Low charge injection makes the MAX14803AEWZ+T useful where a switched analog node must preserve signal integrity during state transitions. The 16 channels can be loaded through the internal shift register and held by the programmable latch, allowing controlled updates rather than uncontrolled individual switching. In sensitive instrumentation, the 48 ohm on-resistance still contributes insertion loss, and the 3500 ns transition time should be considered when interpreting transient performance. Layout should minimize capacitive coupling between high-voltage routes, clock lines, and precision inputs, while power and ground returns should be planned according to the manufacturer layout guidance.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা MAX14803AEWZ+T — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | MAX14802AEWZ+T | MAX14803AEWZ+ | MAX14803AEWZ | MAX14803AEWZ-T | MAX14803A |
|---|---|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | 110-WLP (5.4 mm x 5.8 mm) | 110-WLP (5.4 mm x 5.8 mm) | 110-WLP (5.4 mm x 5.8 mm) | 110-WLP (5.4 mm x 5.8 mm) | 110-WLP (5.4 mm x 5.8 mm) | 110-WLP (5.4 mm x 5.8 mm) |
| Number of Channels | 16 | 16 | 16 | 16 | 16 | 16 |
| Switch Configuration | 1:1 SPST | 1:1 SPST | 1:1 SPST | 1:1 SPST | 1:1 SPST | 1:1 SPST |
| Process Technology | HVCMOS | HVCMOS | HVCMOS | HVCMOS | HVCMOS | HVCMOS |
মূল পার্থক্যসমূহ
- Low-charge-injection 16-channel integration (বনামMAX14802AEWZ+T)
- Exact electrical family in an alternative ordering code (বনামMAX14803AEWZ-T)
- Compact standardized switch footprint (বনামMAX14802AEWZ+T)
ডিজাইন নোট
Use the manufacturer pin-description table and recommended land pattern when laying out the 110-WLP package. Keep clock, latch-enable, and serial-data routing away from high-voltage switched nodes to reduce capacitive injection into control signals. Place grounding and return paths directly beneath or adjacent to the device footprint where the layout guidance permits, and preserve assembly clearance around the compact 5.4 mm by 5.8 mm package.
Include the 48 ohm on-resistance in the signal-loss and load analysis, and allocate at least the specified 3500 ns turn-on and turn-off intervals in the control sequence. Low charge injection reduces unwanted signal steps, but it does not eliminate settling, load-capacitance, or crosstalk effects. Verify the complete acquisition path with the external source impedance, cable capacitance, receiver input, and actual switching timing used by the system.
Do not equate the 2.7 V to 5.5 V control-supply range with the maximum voltage permitted on every switched node. Check absolute maximum ratings, off-state isolation, leakage, and transient limits in the manufacturer datasheet for each channel. High-voltage interfaces also require appropriate protection, creepage, clearance, and fault-energy analysis; the compact WLP package does not provide those protections by itself.
কমপ্লায়েন্স তথ্য
Compliance declarations are not stated in the cited product records. The MAX14803A is a high-voltage interface IC and is not presented as an AEC-Q100 automotive-qualified device.