MC1458ID - Dual High-Performance Operational Amplifier | STMicroelectronics
MPN: MC1458ID ✗ জীবনকালের সমাপ্তিMC1458ID সারাংশ
An operational amplifier is a voltage-feedback analog amplifier used to amplify the difference between two input voltages. In a feedback network, the MC1458ID can provide high closed-loop gain, signal buffering, impedance transformation, and active-filter functions. Its dual-circuit architecture places two independent amplifiers in one package, reducing board area when a design requires two analog signal channels.
The MC1458ID is described as a high-performance monolithic dual operational amplifier with low power consumption and a large input-voltage range. The device also features high gain, short-circuit protection, no-latch-up behavior, and operation without frequency compensation. These characteristics make it suitable for instrumentation, audio signal processing, active filtering, summing and integrating circuits, and general analog control systems.
The MC1458ID uses a conventional dual-amplifier architecture rather than a digitally controlled or precision-specialty amplifier. Its two channels are packaged in an 8-SOIC, allowing a compact surface-mount implementation. The wide operating-voltage capability supports varied analog supply conditions, while the low-noise designation is relevant to applications in which signal integrity and small-signal amplification matter.
Typical uses include audio preamplification, instrumentation buffering, active filters, summing amplifiers, integrators, voltage followers, and function-generator circuits. In an instrumentation application, the device can buffer sensor outputs before conversion or further processing. In audio systems, one channel may process one signal path while the second handles another, provided the power supply and grounding arrangement support both circuits.
When designing around the MC1458ID, use the manufacturer pin-description table to assign supply, input, and output connections, and observe the dual-amplifier decoupling requirements. Place bypass capacitors close to the supply pins, keep feedback-loop routing short, and check input and output signal limits against the device operating conditions before finalizing the board layout.
This product page combines the STMicroelectronics MC1458ID device identity, package information, functional applications, sourcing structure, and practical design guidance to support faster component selection and board-level implementation.
এর জন্য ড্রপ-ইন বিকল্প MC1458ID — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই সিরিজের ভ্যারিয়েন্ট
একই সিরিজের মডেল যেগুলো drop-in compatible MC1458ID (একই form factor এবং footprint) — পার্থক্য রয়েছে Package, Short-Circuit Protection.
MC1458IDT
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
MC1458PS
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →MC1458CD
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
MC1458IDR
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
MC1458IDT
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
MC1458ID সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Device Type | Dual operational amplifier |
| Number of Amplifier Circuits | 2 circuits |
| প্যাকেজ | 8-pin SOIC |
| মাউন্টিং টাইপ | Surface mount |
| Application Category | General-purpose operational amplifier |
| Architecture | Voltage-feedback operational amplifier |
| Input Type | Differential input |
| Low-Noise Feature | Low-noise operation |
| Gain | High gain |
| Frequency Compensation | No frequency compensation required |
| Short-Circuit Protection | Present |
| Latch-Up Behavior | No latch-up |
| Power Consumption | Low power consumption |
| অপারেটিং তাপমাত্রা | Wide temperature range |
| Datasheet Page Count | 6 pages |
| Datasheet File Size | 142 Kbytes |
| AEC-Q100 Qualification | Not applicable |
MC1458ID পিন কনফিগারেশন
| পিন 1 | OUT1 — Output of amplifier 1 |
| পিন 2 | IN1- — Inverting input of amplifier 1 |
| পিন 3 | IN1+ — Non-inverting input of amplifier 1 |
| পিন 4 | V- — Negative supply connection |
| পিন 5 | IN2+ — Non-inverting input of amplifier 2 |
| পিন 6 | IN2- — Inverting input of amplifier 2 |
| পিন 7 | OUT2 — Output of amplifier 2 |
| পিন 8 | V+ — Positive supply connection |
সাধারণ ব্যবহার
MC1458ID এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Audio Signal Conditioning, Instrumentation Buffering, Active Filter Design, Summing Amplifier, Integrator and Control Loop, Function Generator.
Audio Signal Conditioning
The MC1458ID fits general-purpose audio amplification and buffering because it combines two low-noise operational-amplifier circuits in one 8-SOIC package. One channel can condition a left audio path while the second handles a right path, reducing component count and simplifying board layout. The amplifier can sit between a source and a downstream mixer, headphone circuit, or measurement chain. Designers should keep feedback traces short, decouple the supply near the device, and verify output swing, bandwidth, and distortion against the actual signal level before production.
সুপারিশকৃত
Instrumentation Buffering
The MC1458ID is appropriate for buffering sensor and instrumentation outputs where two related analog channels need independent amplification. Its high-gain voltage-feedback architecture can reduce loading of a preceding sensor or divider network before signals reach an ADC or controller. The two channels are integrated in a compact 8-SOIC, which helps keep analog routing orderly. Check common-mode range and output swing for the actual sensor excitation, and route the ground return directly to the device to avoid adding noise or instability.
সুপারিশকৃত
Active Filter Design
The MC1458ID can implement active filters because the manufacturer identifies summing amplifiers, voltage followers, active filters, and function generators as intended uses. Two amplifier sections allow a filter or filter-and-buffer architecture to be assembled with fewer separate packages. The external resistor and capacitor network determines the nominal response, while the amplifier’s gain and frequency behavior determine how closely the circuit follows the intended transfer function. Validate tolerances, noise, and stability in the final layout rather than relying only on nominal values.
সুপারিশকৃত
Summing Amplifier
The MC1458ID is explicitly suited to summing-amplifier circuits, where multiple input signals are combined through a feedback network. The dual package can implement a main summing amplifier and a follow-up buffer or channel-balancing stage. This arrangement is useful in audio mixers, sensor-combination circuits, test fixtures, and control-signal generation. Select the feedback resistors for the intended gain and scaling, confirm that input and output remain within the device limits, and place the feedback network close to the relevant pins for predictable behavior.
সুপারিশকৃত
Integrator and Control Loop
The MC1458ID supports integrator-type analog control loops because it is identified for integrator applications. One channel can integrate a control or measurement error signal while the other provides buffering or auxiliary gain. Integrator stability depends on the feedback capacitor, leakage, reset path, and the selected operating frequency, so those values should be reviewed against the datasheet. Keep the input and feedback components physically close and provide a defined reference point to prevent drift or saturation during startup.
সুপারিশকৃত
Function Generator
The MC1458ID is listed for function-generator applications, making it suitable for simple analog oscillator and waveform-shaping circuits. Its two amplifier channels can be arranged for a signal-generating section and a supporting buffer or shaping stage. The operating frequency, amplitude, and distortion are determined by the external timing and feedback network as well as the amplifier characteristics. Validate the complete circuit across the intended frequency range and ensure the output does not exceed the device’s operating limits.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা MC1458ID — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | MC1458IDT | MC1458P | MC1458CD | MC1458IDR | MC1458IDT |
|---|---|---|---|---|---|---|
| Package | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Amplifier Circuits | 2 circuits | 2 circuits | 2 circuits | 2 circuits | 2 circuits | 2 circuits |
| Device Category | General-purpose operational amplifier | Dual operational amplifier | Dual operational amplifier | Dual operational amplifier | Dual operational amplifier | Dual operational amplifier |
| Low-Noise Feature | Low noise | MC1458 family feature; confirm exact limits | MC1458 family feature; confirm exact limits | MC1458 family feature; confirm exact limits | MC1458 family feature; confirm exact limits | MC1458 family feature; confirm exact limits |
| Frequency Compensation | Not required | MC1458 family feature; confirm exact operating mode | MC1458 family feature; confirm exact operating mode | MC1458 family feature; confirm exact operating mode | MC1458 family feature; confirm exact operating mode | MC1458 family feature; confirm exact operating mode |
| Short-Circuit Protection | Present | MC1458 family feature; confirm exact limits | MC1458 family feature; confirm exact limits | MC1458 family feature; confirm exact limits | MC1458 family feature; confirm exact limits | MC1458 family feature; confirm exact limits |
মূল পার্থক্যসমূহ
- Two amplifier channels in one compact package (বনামMC1458IDT)
- Application coverage for classic analog functions (বনামMC1458P)
- No external frequency-compensation requirement (বনামMC1458CD)
ডিজাইন নোট
Place the supply bypass capacitor close to the MC1458ID positive and negative supply pins. Keep the ground return short and use the package ground pin as the local reference. Check the complete manufacturer datasheet for the allowed supply range and current limits before selecting the regulator. The device is described as a low-power-consumption dual amplifier, but actual board consumption depends on supply voltage, load, and channel activity.
Route each feedback loop as a short, compact connection between the relevant output and input pins. Place feedback resistors and capacitors close to the amplifier pins rather than around the board perimeter. This reduces parasitic capacitance and resistance that can alter active-filter response, integrator behavior, and stability. Maintain a direct ground path for both amplifier channels.
Do not treat a generic dual-op-amp pin diagram as a substitute for the MC1458ID pin-description table. Confirm amplifier-channel assignments, supply pins, and any offset-adjustment connections in the manufacturer datasheet. Also verify the input range and output swing at the intended supply voltage. The device’s wide input-voltage capability and no-latch-up feature do not remove the need to check operating limits.
কমপ্লায়েন্স তথ্য
No compliance declarations are stated in the supplied product-page and datasheet-listing information. The MC1458ID is a general-purpose analog IC rather than an automotive-qualified device.