MC1488NG4 - Quad RS-232 Line Driver | Texas Instruments
MPN: MC1488NG4 ✓ সক্রিয়MC1488NG4 সারাংশ
An RS-232 line driver is an interface IC that converts logic-level signals into bipolar voltage levels suitable for RS-232 communications. Within the interface hierarchy, the MC1488 belongs to the line-driver and transceiver class, where a transmitter handles outbound data and a receiver handles inbound data. Because the MC1488 provides four drivers and no receivers, a complete communication channel generally requires a separate receiver IC and the associated interface protection.
The primary feature of the MC1488NG4 is its four-driver organization in one 14-pin PDIP package. Four channels allow one driver IC to support multiple RS-232 outputs while reducing the number of external packages and board-space requirements. The device is specifically identified as a 4/0 RS-232 driver, meaning that it offers four driver functions and zero receiver functions. It is also associated with the MC1488, SN55188, and SN75188 device family in the manufacturer documentation.
The MC1488 architecture uses current-limited driver outputs suited to interfaced RS-232 lines. In the documented typical application, a diode is placed in series with each supply-voltage terminal, allowing the supply arrangement to suit the system polarity and interface requirements. Designers should preserve that topology, validate output-level behavior with the intended cables and loads, and review the complete manufacturer datasheet before releasing a new layout.
Typical uses include multi-port RS-232 equipment, data-terminal interfaces, industrial control panels, legacy data-collection systems, and communications equipment requiring several unidirectional outputs. The MC1488 can also be paired with a quad receiver such as the MC1489 family to create a complete differential-direction RS-232 interface on a board that still uses through-hole integrated circuits.
PCB planning should allow the 14-pin PDIP to be installed without pin-1 errors, and signal-routing should keep driver outputs away from sensitive analog or high-speed digital traces. Adequate bypass capacitance and grounding remain essential for stable operation. The actual electrical limits, output-current behavior, supply range, temperature range, and timing or transition characteristics must be checked against the manufacturer datasheet before design sign-off.
This product page consolidates the identified RS-232 functionality, package information, datasheet access, compatible interface-family options, and practical implementation guidance. It also distinguishes a genuine same-package line-driver alternative from receiver ICs, which may complement the MC1488NG4 but cannot replace its four driver outputs.
এর জন্য ড্রপ-ইন বিকল্প MC1488NG4 — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই সিরিজের ভ্যারিয়েন্ট
একই সিরিজের মডেল যেগুলো drop-in compatible MC1488NG4 (একই form factor এবং footprint) — পার্থক্য রয়েছে Package, Mounting Type, Operating Temperature Range.
MC1488NE4
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়মূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →SN75188N
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়মূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →SN55188N
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
MC1488N
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়মূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →MC1488NG4 বিশেষণ
| Device Type | Quadruple RS-232 line driver |
| Driver Channel Count | 4 channels |
| Receiver Channel Count | 0 channels |
| Interface Standard | ANSI TIA/EIA-232-E |
| প্যাকেজ | 14-pin PDIP |
| Package Width | 0.300 inch (7.62 mm) |
| মাউন্টিং টাইপ | Through-hole |
MC1488NG4 0.300 inch (7.62 mm) পিন কনফিগারেশন গাইড
MC1488NG4 (0.300 inch (7.62 mm) প্যাকেজ)-এর পিন কনফিগারেশন। পিন নম্বরিং, ফাংশন এবং সংযোগ ডায়াগ্রাম প্রস্তুতকারকের ডেটাশিটে সংজ্ঞায়িত করা আছে। সঠিক ফুটপ্রিন্ট এবং সোল্ডারিং নির্দেশিকার জন্য এটি দেখুন।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি MC1488NG4.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
MC1488NG4 এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Multi-Port RS-232 Control Interface, Data-Terminal Equipment Interface, Industrial Serial Data Collection, Legacy Communication Adapter, Instrumentation Front Panel, Embedded Service Console.
Multi-Port RS-232 Control Interface
The MC1488NG4 fits legacy control equipment that must originate several RS-232 signals from one board. Its four driver channels provide a compact way to implement multiple outbound command paths while retaining the through-hole convenience of a 14-pin PDIP. A separate quad receiver can handle inbound data, allowing the controller to retain full-duplex operation without increasing the transmitter count. Designers should use the typical-application supply arrangement, include connector-level protection, and verify every output against the intended baud rate and cable load.
সুপারিশকৃত
Data-Terminal Equipment Interface
MC1488NG4 is appropriate for data-terminal equipment that converts internal logic signals into the bipolar levels required for RS-232 communications. The four-driver arrangement supports equipment with several status, command, or data outputs while leaving receive paths to a companion receiver IC. Because the interface must comply with ANSI TIA/EIA-232-E, the board should follow the manufacturer application circuit, maintain a controlled ground reference, and validate signal transitions and loading under the longest intended cable run.
সুপারিশকৃত
Industrial Serial Data Collection
The MC1488NG4 can serve as the transmit section of an industrial data-collection controller that reports readings, alarms, and configuration commands over several RS-232 links. Its four channels reduce the number of separate driver packages, while the PDIP format supports serviceable control systems and prototype rework. For factory use, add appropriate transient protection at the connector, use a robust reference ground, and check operating temperature and ESD requirements against the complete product specification before deployment.
সুপারিশকৃত
Legacy Communication Adapter
MC1488NG4 is useful when adapting a modern controller to legacy equipment that exposes several RS-232 output lines. The four drivers can replace separate single-channel transmitter stages and provide a consistent interface with the target equipment. The adaptation board should identify the exact MC1488 ordering grade, preserve the documented supply-diode arrangement, and test each channel independently. Receiver ICs cannot replace the transmitter, but a quad receiver can be added when the legacy device also returns data.
সুপারিশকৃত
Instrumentation Front Panel
The MC1488NG4 can support multi-channel command outputs in laboratory and test-instrument front panels that retain RS-232 compatibility. Four driver outputs may be assigned to mode commands, triggers, status lines, or service functions while logic-side signals remain compatible with the host interface. Because front-panel cables can introduce large transients, protection belongs at the connector and must not distort normal RS-232 levels. Keep driver traces away from sensitive measurement circuitry and use a single, well-referenced ground strategy.
সুপারিশকৃত
Embedded Service Console
MC1488NG4 can provide the outbound RS-232 section of an embedded service console intended for configuration and diagnostics. Four driver channels allow a service processor or microcontroller to operate several console outputs without four separate packages. The device is especially suitable for legacy equipment that uses through-hole construction and requires a standard RS-232 interface. Confirm the host's logic levels, supply arrangement, and maximum load, then test hot plugging, ground offset, and cable-length behavior because those conditions affect real installations.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা MC1488NG4 — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | MC1488NE4 | SN75188N | SN55188N | MC1488N |
|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 14-pin PDIP, 0.300 inch (7.62 mm) | 14-pin PDIP | 14-pin PDIP | 14-pin PDIP | 14-pin PDIP |
| Product Type | Quadruple RS-232 line driver | Quadruple line driver | Quadruple line driver | Quadruple line driver | Quadruple line driver |
| Driver Channels | 4 channels | 4 channels | 4 channels | 4 channels | 4 channels |
| Receiver Channels | 0 channels | 0 channels | 0 channels | 0 channels | 0 channels |
| Interface Standard | ANSI TIA/EIA-232-E | RS-232 line-driver family | ANSI TIA/EIA-232-E family | ANSI TIA/EIA-232-E family | RS-232 line-driver family |
মূল পার্থক্যসমূহ
- Four-driver transmitter in a single 14-pin PDIP (বনামMC1489NG4)
- Same-family procurement alternative (বনামMC1488NE4)
- Related driver family with broader characterized temperature option (বনামSN55188N)
- Established RS-232 family architecture (বনামSN75188N)
ডিজাইন নোট
Do not treat a quad receiver as a transmitter substitute. MC1488NG4 provides four outbound RS-232 driver channels and zero receive channels, whereas the MC1489 family implements the receive side. In a bidirectional design, allocate separate logic and connector resources for each direction, verify the pin functions against the manufacturer diagrams, and confirm that the selected family suffix has the required temperature grade and electrical limits.
Follow the manufacturer typical-application schematic, including the documented diode placement in series with each supply-voltage terminal. Keep the four driver outputs away from sensitive analog inputs and high-speed digital nets, provide a low-impedance ground reference, and place bypass capacitors close to the device supply pins. Route the connector side through appropriate transient protection so that external-cable transients do not enter the logic and driver circuitry directly.
Determine worst-case dissipation from the exact ordering option's supply voltage, output state, and load-current limits rather than using a generic value. Account for the voltage dropped across the series diode in the documented application. At high ambient temperature or with several continuously active outputs, verify junction temperature using the package thermal information and the board's actual copper area, adding airflow or heat spreading if the calculated margin is inadequate.
Check the 14-pin PDIP pin-1 orientation during schematic capture and PCB assembly, then compare the placed footprint with the manufacturer package drawing. RS-232 is a bipolar interface, so a shared ground is functionally important; route the interface ground with an appropriate low-impedance path and keep it distinct from noisy motor or switching-current returns where practical. Validate every channel with the intended cable and equipment because unused logic levels can expose interface asymmetries.
কমপ্লায়েন্স তথ্য
The manufacturer material confirms ANSI TIA/EIA-232-E conformance. Specific RoHS, REACH, lead-free, halogen-free, conflict-minerals, and AEC-Q100 statuses were not identified for the exact MC1488NG4 ordering option.