MCP3562RT-E/ST - 24-Bit Dual-Channel ADC | Microchip Technology
MPN: MCP3562RT-E/ST ✓ সক্রিয়MCP3562RT-E/ST সারাংশ
An ADC is an interface IC that converts continuous analog voltages into digital data for processing by a microcontroller, DSP, or other digital controller. Within the product hierarchy, the MCP3562RT-E/ST is a delta-sigma ADC, which belongs to the ADC and DAC class of interface integrated circuits. Delta-sigma architectures are especially useful when high resolution, narrow-band noise performance, and digital averaging are more important than very high conversion rates.
Key features include 24-bit resolution, a programmable data rate up to 153.6 kSPS, two differential or four single-ended inputs, and an internal voltage reference. Its differential input arrangement helps reject common-mode noise when measuring bridge sensors, current shunts, or other signals referenced to a common return. The SPI interface allows compact, deterministic communication with embedded control systems.
The MCP3562R family uses a sigma-delta conversion architecture to achieve high effective resolution while integrating digital filtering. The converter supports analog and digital supply rails in overlapping low-voltage ranges, allowing separate partitioning of analog and digital power domains when the system architecture benefits from noise isolation. The exact internal oscillator, digital filter, line-frequency rejection, and gain-error details should be confirmed in the manufacturer datasheet before final circuit design.
Typical applications include industrial process monitoring, precision temperature measurement, bridge-based pressure sensing, current measurement, laboratory instrumentation, and embedded data-acquisition systems. Four single-ended inputs are useful for multiplexed multi-sensor measurements, while two differential channels support noise-sensitive front ends. The 153.6 kSPS maximum rate also allows the converter to capture rapidly changing process signals without requiring a high-speed SAR ADC.
For reliable implementation, place the supply bypass capacitors close to their associated pins and route analog inputs away from digital clocks and switching nodes. Use a quiet reference and reference-decoupling network, verify the input common-mode range against the selected gain and data rate, and include an external reference option when accuracy must be referenced to a system calibration rather than the internal voltage reference.
This page combines the manufacturer product information with package, electrical, application, and design guidance for engineers evaluating the MCP3562RT-E/ST. It also distinguishes exact drop-in alternatives from related ADC options, helping PCB, sourcing, and signal-chain decisions be made without treating different packages or different channel configurations as interchangeable.
এর জন্য ড্রপ-ইন বিকল্প MCP3562RT-E/ST — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই পণ্যের জন্য কোনো ড্রপ-ইন বিকল্প পাওয়া যায়নি।
বিকল্প অনুরোধ করুনMCP3562RT-E/ST সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Converter Type | 24-bit delta-sigma ADC |
| Maximum Sampling Rate | 153.6 kSPS |
| Number of Differential Inputs | 2 |
| Number of Single-Ended Inputs | 4 |
| Input Type | Differential |
| ইন্টারফেস | SPI |
| Analog Supply Voltage Range | 2.7 V to 3.6 V |
| Digital Supply Voltage Range | 1.8 V to 3.7 V |
| Voltage Reference | Internal |
| Minimum Operating Temperature | -40 °C |
| Maximum Operating Temperature | +125 °C |
| প্যাকেজ | 20-pin TSSOP |
| মাউন্টিং স্টাইল | SMD/SMT surface mount |
| External Oscillator | Integrated |
MCP3562RT-E/ST 20-pin tssop পিন কনফিগারেশন গাইড
MCP3562RT-E/ST (20-pin tssop প্যাকেজ)-এর পিন কনফিগারেশন। এই অ্যানালগ কম্পোনেন্টে ইনপুট, আউটপুট ও পাওয়ার সাপ্লাই পিন রয়েছে। অফসেট নাল, কম্পেনসেশন ও এনেবল পিন কনফিগারেশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। সিগন্যাল কন্ডিশনিং ও অ্যামপ্লিফায়ার সার্কিটের জন্য আদর্শ।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি MCP3562RT-E/ST.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
MCP3562RT-E/ST এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Process Monitoring, Precision Temperature Sensing, Bridge Pressure Measurement, Current-Shunt Monitoring, Laboratory Data Acquisition, Embedded Sensor Interface.
Industrial Process Monitoring
The MCP3562RT-E/ST fits industrial process-monitoring boards that measure several low-level sensor outputs with a shared control system. Its 24-bit conversion resolution and maximum rate of 153.6 kSPS provide flexibility between measurement precision and bandwidth, while four single-ended inputs can support multiplexed thermocouple, voltage, or status channels. Two differential inputs are preferable when the source uses a differential signal referenced to a common return. The SPI interface simplifies connection to an embedded controller, and the 20-pin TSSOP package supports compact surface-mount assemblies. Design the analog front end around the configured gain and common-mode range, and keep the analog supply, internal-reference decoupling, and input traces physically separated from switching circuitry.
সুপারিশকৃত
Precision Temperature Sensing
The MCP3562RT-E/ST is suitable for precision temperature-measurement systems using resistive sensors, diode junctions, or low-level analog front ends. Its 24-bit resolution helps retain useful signal detail when the measured quantity is represented by a small voltage change. Two differential inputs allow each sensor to be measured with excitation and return connections, reducing sensitivity to shared ground disturbances compared with a single-ended arrangement. The maximum data rate of 153.6 kSPS supports both relatively slow thermal measurements and faster monitoring loops, while the internal voltage reference simplifies standalone acquisition. For best performance, use matched input filtering, verify the sensor excitation requirements, and keep the reference and analog input network away from digital clocks and power-converter switching nodes.
সুপারিশকৃত
Bridge Pressure Measurement
The MCP3562RT-E/ST can form the conversion stage of a bridge-based pressure or force-measurement system. Two differential input channels are well matched to bridge outputs because the converter measures the voltage difference between complementary bridge nodes rather than their common-mode voltage. Its 24-bit resolution supports fine-grained signal acquisition, and the SPI interface allows a microcontroller to apply calibration, offset correction, and digital filtering. The internal reference can simplify initial design work, although a calibrated external reference may be preferable where long-term traceability is important. The analog input network should include the protection and filtering required by the bridge, while the 2.7 V to 3.6 V analog supply must meet the bridge excitation and converter input limits simultaneously.
সুপারিশকৃত
Current-Shunt Monitoring
The MCP3562RT-E/ST is appropriate for measuring small voltage drops across a current shunt in power-supply, battery, or motor-control systems. A differential input pair rejects much of the common-mode voltage present on both sides of the shunt, while the 24-bit resolution permits measurement of relatively small shunt voltages. The SPI interface supports periodic current sampling for control, logging, or fault detection. Designers should select a shunt whose resistance and power rating suit the expected current, protect the inputs against transient events, and apply filtering that does not unnecessarily delay the control loop. The converter's 153.6 kSPS maximum rate gives substantial timing margin for many monitoring systems, but the final data rate must be matched to the required control bandwidth.
সুপারিশকৃত
Laboratory Data Acquisition
The MCP3562RT-E/ST works well in compact laboratory and field data-acquisition equipment where low-level analog signals must be converted to digital data for display or analysis. Four single-ended inputs support general-purpose measurement of multiple sources, while two differential channels provide better rejection for laboratory sources with paired outputs. The 24-bit resolution is useful when the output must retain fine amplitude detail without a separate high-resolution external converter, and the internal reference supports self-contained instrumentation. The SPI interface allows a controller to configure data rate and retrieve samples through a compact serial bus. For bench instruments, calibrate gain and offset, monitor reference stability, and use shielded or guarded analog routing when measuring sources with high source impedance or long external cables.
সুপারিশকৃত
Embedded Sensor Interface
The MCP3562RT-E/ST can serve as the precision acquisition stage of an embedded sensor node for environmental, energy, or equipment monitoring. Its four single-ended inputs provide a practical way to combine several slowly changing sensor outputs, while the 24-bit resolution helps preserve small signal changes. The internal reference and SPI interface reduce the number of external components and controller pins required for a compact board. With a maximum rate of 153.6 kSPS, the converter can also support applications requiring periodic faster sampling. Power partitioning is important: the 2.7 V to 3.6 V analog rail and 1.8 V to 3.7 V digital rail allow separate filtering strategies, provided all sequencing and decoupling requirements in the manufacturer documentation are followed.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা MCP3562RT-E/ST — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য |
|---|---|
| Package | 20-pin TSSOP |
| Brand | Microchip Technology |
| Resolution | 24 bit |
| Maximum Sampling Rate | 153.6 kSPS |
| Differential Input Channels | 2 |
| Single-Ended Input Channels | 4 |
| Interface | SPI |
| Analog Supply Voltage Range | 2.7 V to 3.6 V |
| Digital Supply Voltage Range | 1.8 V to 3.7 V |
| Voltage Reference | Internal |
| Operating Temperature Range | -40 °C to +125 °C |
| Mounting Style | SMD/SMT |
মূল পার্থক্যসমূহ
- Combines four single-ended inputs with two differential inputs (বনামMCP3561R)
- Supports more differential measurement channels than a single-channel family member (বনামMCP3564R)
- Combines 24-bit resolution with a 153.6 kSPS maximum rate (বনামMCP3301T-BI/SN)
ডিজাইন নোট
Place the analog and digital bypass capacitors directly beside their respective supply pins, using the shortest possible ground-return paths. Keep analog input traces away from SPI clock lines, switching-regulator nodes, and high-current return paths. For differential measurements, route the two input channels as a matched pair with consistent geometry. This layout discipline limits capacitive pickup and common-mode conversion, which are especially important when using the converter's 24-bit resolution.
Verify the analog input common-mode range, gain setting, and data-rate-dependent settling requirements before applying sensor signals. Input filters should remove unwanted high-frequency energy without creating an excessive acquisition delay or introducing excessive thermal noise. Differential sensor wiring should include appropriate transient protection and a return path close to the signal source, while a quiet reference-decoupling network helps prevent reference disturbance from appearing as measurement error.
Do not substitute MCP3562RT-E/NC for MCP3562RT-E/ST without redesigning the PCB. The ordering codes use 20-pin TSSOP and 20-UQFN packages, respectively, so their land patterns and mechanical drawings differ. Also avoid treating MCP3561R, MCP3564R, or MCP3568R as automatic drop-in devices: differing channel counts can change the required multiplexing and input architecture even when several electrical performance figures are shared.
কমপ্লায়েন্স তথ্য
The verified product information confirms the converter, package, supply ranges, interface, and operating-temperature range, but it does not explicitly state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is not applicable because this is an analog-to-digital converter rather than an automotive-qualified device category.