MCP6002-I/P - Dual 1MHz R-R Op Amp | Microchip Technology
MPN: MCP6002-I/P ✓ সক্রিয়MCP6002-I/P সারাংশ
An operational amplifier is an analog signal-conditioning semiconductor that compares an input signal with a feedback-defined reference and amplifies the difference. The dual MCP6002-I/P contains two independent amplifiers in one package, placing it in the hierarchy of operational amplifier, analog amplifier, linear amplifier, signal-conditioning IC, and integrated circuit. Rail-to-rail input and output behavior supports signal operation near the supply rails.
The principal features are a 1.8 V minimum operating voltage, a 6 V maximum operating voltage, 1 MHz typical gain-bandwidth product, and 100 uA typical quiescent current. Its 90-degree typical phase margin supports stable operation in conventional closed-loop configurations. The dual amplifier arrangement reduces component count when two independent analog channels are required, while the low-power operating characteristics suit battery-powered and portable equipment.
Operationally, the MCP6002-I/P uses its two amplifier sections for independent signal conditioning, buffering, amplification, or feedback-control functions. Rail-to-rail input capability expands the usable input range toward the supply limits, while rail-to-rail output capability allows output voltage to approach those limits under suitable load and frequency conditions. The 1 MHz gain-bandwidth product defines the approximate closed-loop bandwidth available at a given noise-gain setting.
Typical applications include low-power sensor conditioning, portable instrumentation, audio input stages, general-purpose voltage buffering, and embedded analog signal processing. Two amplifier sections can handle related channels, such as differential sensor excitation and acquisition or separate signal-conditioning paths. The 8-lead DIP package is particularly useful for prototypes, educational systems, through-hole assemblies, and designs where a socketed or manually assembled implementation is preferred.
Designers should verify the signal bandwidth, output swing, input bias current, noise, stability, and load-driving requirements against the operating voltage and load. Place bypass capacitors close to the supply pins, route feedback paths away from noisy input and power nodes, and confirm that the selected gain does not compromise phase margin. The DIP footprint also requires adequate spacing around adjacent board components and consideration of lead-bend radius during manual assembly.
This product page combines the manufacturer product information, distributor availability references, and engineering cross-reference results into a focused engineering overview. It also provides package-specific guidance, practical application context, design cautions, and a comparison framework for evaluating drop-in amplifier options without changing the 8-lead DIP footprint.
এর জন্য ড্রপ-ইন বিকল্প MCP6002-I/P — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই সিরিজের ভ্যারিয়েন্ট
একই সিরিজের মডেল যেগুলো drop-in compatible MCP6002-I/P (একই form factor এবং footprint) — পার্থক্য রয়েছে Package, Input Bias Current, Supply Voltage Range, Mounting Type, Output Swing.
MCP6002-E/P
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়মূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →MCP6002-I/CL
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
MCP6002-E/CL
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
TLV9062IP
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
TLV9002IP
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
TLV6002IP
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
MCP6002-I/P সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Amplifier Count | 2 amplifiers |
| Product Type | General-purpose operational amplifier |
| Operating Voltage Range | 1.8 V to 6 V |
| Typical Gain-Bandwidth Product | 1 MHz |
| Typical Quiescent Current | 100 uA |
| Input Type | Rail-to-rail input |
| আউটপুট টাইপ | Rail-to-rail output |
| Typical Phase Margin | 90 degrees |
| প্যাকেজ | 8-lead PD DIP |
| Lead Count | 8 leads |
| মাউন্টিং টাইপ | Through-hole |
| Temperature Grade | Industrial, -40 C to +85 C |
MCP6002-I/P 8-lead pd dip পিন কনফিগারেশন গাইড
MCP6002-I/P (8-lead pd dip প্যাকেজ)-এর পিন কনফিগারেশন। এই অ্যানালগ কম্পোনেন্টে ইনপুট, আউটপুট ও পাওয়ার সাপ্লাই পিন রয়েছে। অফসেট নাল, কম্পেনসেশন ও এনেবল পিন কনফিগারেশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। সিগন্যাল কন্ডিশনিং ও অ্যামপ্লিফায়ার সার্কিটের জন্য আদর্শ।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি MCP6002-I/P.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
MCP6002-I/P এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Low-Power Sensor Signal Conditioning, Portable Instrumentation, Audio Input Buffering, Voltage Buffering and Level Conditioning, Battery-Powered Monitoring Systems, General-Purpose Feedback Control.
Low-Power Sensor Signal Conditioning
The MCP6002-I/P fits low-frequency sensor conditioning because its 1.8 V to 6 V operating range supports low-voltage systems, while rail-to-rail input and output operation extends usable signal levels toward the supply rails. Two amplifier sections can provide conditioning for two related sensor channels without requiring separate packages. The typical 100 uA quiescent current helps limit battery drain, although total system current must also include sensors and interface circuits. Before deployment, verify input bias current against high-impedance sources and confirm that the 1 MHz typical gain-bandwidth product supports the required sensor bandwidth and settling behavior.
সুপারিশকৃত
Portable Instrumentation
Portable instruments benefit from the MCP6002-I/P’s 100 uA typical quiescent current and ability to operate from 1.8 V to 6 V. Its dual architecture can support separate buffer or gain stages for measurement channels, while the 8-lead DIP package simplifies through-hole prototypes, educational instruments, and serviceable assemblies. The 1 MHz typical gain-bandwidth product is suitable for many low-frequency sensor and control signals. Designers should still evaluate noise, offset, input bias current, and output settling against the instrument’s resolution, because a low-power amplifier does not automatically satisfy precision requirements.
সুপারিশকৃত
Audio Input Buffering
The MCP6002-I/P can buffer low-frequency audio input stages when the source impedance is manageable and the circuit does not require the slew rate or output drive of a dedicated audio amplifier. Rail-to-rail input and output behavior is useful in 1.8 V to 6 V systems where conventional non-rail-to-rail devices would reduce usable signal range. The two amplifier sections support left and right channels in a dual implementation. The typical 1 MHz gain-bandwidth product is sufficient for many control-rate audio paths, but designers should verify distortion, noise, stability with capacitive loads, and the full signal bandwidth in the target circuit.
সুপারিশকৃত
Voltage Buffering and Level Conditioning
For voltage buffering, the MCP6002-I/P provides two unity-gain-capable amplifier sections in one 8-lead DIP package. Rail-to-rail input capability is valuable when conditioning signals near the lower or upper end of a 1.8 V to 6 V supply, and the low typical quiescent current of 100 uA supports power-conscious designs. The typical 90-degree phase margin provides a useful starting point for conventional closed-loop layouts. Confirm capacitive-load behavior, source impedance, output current, and settling requirements, particularly when the buffer drives long PCB traces or an ADC input.
সুপারিশকৃত
Battery-Powered Monitoring Systems
The MCP6002-I/P is appropriate for battery-powered monitoring systems that operate on a 1.8 V to 6 V rail and need two low-power analog channels. Its 100 uA typical quiescent current reduces the amplifier’s contribution to standby power, while rail-to-rail input and output operation can preserve more usable signal range at low supply voltages. The two sections may condition separate sensor outputs or form part of a feedback-control network. Validate the complete power profile, sleep behavior, sensor leakage, and regulator efficiency, since the amplifier quiescent current is only one element of the complete energy budget.
সুপারিশকৃত
General-Purpose Feedback Control
The dual MCP6002-I/P can implement two related functions in compact feedback-control systems, such as an error amplifier and a signal buffer. Its 1.8 V to 6 V supply range supports low-energy control electronics, and the typical 1 MHz gain-bandwidth product is useful for loops whose crossover frequency is substantially lower. The typical 90-degree phase margin assists conventional stability analysis but does not replace a complete loop and loading analysis. Check the sensed signal range, actuator drive requirements, compensation network, startup behavior, and tolerance of the closed-loop gain.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা MCP6002-I/P — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | MCP6002-E/P | MCP6002-I/CL | MCP6002-E/CL | TLV9062IP | TLV9002IP |
|---|---|---|---|---|---|---|
| Package | 8-lead PD DIP | 8-lead PD DIP | 8-lead ceramic DIP | 8-lead ceramic DIP | 8-lead PD DIP | 8-lead PD DIP |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Texas Instruments | Texas Instruments |
| Amplifier Count | 2 | 2 | 2 | 2 | 2 | 2 |
মূল পার্থক্যসমূহ
- Low-power operation across a 1.8 V to 6 V supply range (বনামTLV9062IP)
- Two rail-to-rail amplifier sections in one package (বনামTLV6002IP)
- Family consistency for industrial and extended-temperature sourcing (বনামMCP6002-E/P)
- Through-hole 8-lead DIP assembly flexibility (বনামMCP6002-I/CL)
ডিজাইন নোট
Place the supply bypass capacitor close to the MCP6002-I/P power and ground pins and use a short, low-inductance return path. For a through-hole DIP layout, keep sensitive input and feedback traces away from switching nodes and unrelated high-current traces. Because the device uses an 8-lead DIP, preserve adequate spacing for lead bending, soldering access, and component-body clearance during manual assembly.
Check closed-loop stability for every planned gain and load, particularly when driving capacitive inputs such as long sensor cables or ADC sampling networks. The typical 90-degree phase margin is a useful family-level reference, but component tolerances, capacitive loading, and board parasitics can alter the actual response. Keep feedback paths short, place compensation components close to the amplifier pins, and verify settling time with oscilloscope measurements before production.
Do not assume that rail-to-rail input and output imply unrestricted linear operation at the supply rails. Check the manufacturer’s input common-mode and output-swing limits, load current, supply voltage, and frequency together. For high-impedance sensors, also examine input bias current and leakage, because the 100 uA quiescent-current specification does not describe the input impedance or bias behavior.
Estimated: with a 5 V supply, a 3.3 V output, and 1 mA output current, the approximate regulator-style power loss in the amplifier output stage is 1.7 mW using the input current of 1 mA. At 100 uA quiescent current and a 5 V supply, quiescent dissipation is approximately 0.5 mW. These estimates do not include package losses during transients, and they should not replace the maximum operating conditions in the manufacturer datasheet.
কমপ্লায়েন্স তথ্য
The manufacturer product listing does not expose the requested compliance declarations in the retrieved product information. AEC-Q100 is not applicable to this general-purpose industrial amplifier order code.
