Microchip Technology

MCP6004-E/SL - Quad 1MHz R-R Op Amp | Microchip

MPN: MCP6004-E/SL ✓ সক্রিয়
1.8 V to 6 V Vdss 100 µA Id 14-lead SOIC Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

MCP6004-E/SL সারাংশ

The Microchip Technology MCP6004-E/SL is a quad general-purpose operational amplifier with rail-to-rail input and rail-to-rail output, a 1.8 V to 6 V operating supply range, and a typical gain-bandwidth product of 1 MHz. It is packaged in a 14-lead SOIC. The MCP6004 family is designed for low-power signal conditioning where four independent amplifiers and broad supply-voltage compatibility simplify PCB planning.

An operational amplifier is an active semiconductor component that compares an input signal with a feedback network and amplifies the resulting error. Rail-to-rail input and output operation allows the amplifier to approach the supply rails during signal processing, while a 1.8 V to 6 V supply range supports low-voltage sensor, portable-instrumentation, industrial-control, and embedded-system designs. Within the broader power-management and signal-chain hierarchy, the MCP6004 is a voltage-feedback operational amplifier intended for general-purpose analog conditioning.

Each amplifier channel combines a typical 1 MHz gain-bandwidth product with low-power operation and a typical quiescent current of 100 µA. The four-channel integration reduces package count and allows one device to provide filtering, amplification, buffering, or level conversion in a multi-channel analog circuit. Rail-to-rail input and output capability is particularly useful when signals occupy much of the available supply range or when the circuit must process low-amplitude sensor outputs.

The MCP6004-E/SL is the standard-grade E-temperature variant and is identified as a four-circuit, 14-SOIC amplifier. Typical applications include current sensing, sensor interfaces, battery-powered equipment, audio preamplification, data acquisition, and general-purpose analog signal conditioning. Its 1 MHz bandwidth is appropriate for moderate-frequency measurement and control loops rather than high-speed video or precision instrumentation requiring substantially greater bandwidth.

PCB design should preserve the exposed copper and pin clearance required by the 14-lead SOIC footprint and account for input-bias-current and output-swing limitations when operating near the supply rails. Decoupling capacitors should be placed close to the supply pins, and sensitive high-impedance inputs should be routed away from switching nodes. Feedback components should be selected with tolerances appropriate to the gain accuracy required by the application.

This page consolidates the exact MCP6004-E/SL electrical characteristics, package information, sourcing path, compatible alternatives, and practical PCB guidance into a concise engineering reference. It also identifies which electrical and environmental details should be confirmed in the Microchip manufacturer datasheet before a production design is released.

এর জন্য ড্রপ-ইন বিকল্প MCP6004-E/SL — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible MCP6004-E/SL (একই form factor এবং footprint) — পার্থক্য রয়েছে Amplifier Type, Number of Channels, Operating Temperature Range, Package, Input Bias Current.

Analog Devices
Amplifier Type: General Purpose, CMOS
Number of Channels: 4 (Quad)
Operating Temperature Range: -40 °C to +85 °C
Microchip Technology
Operating Temperature Range: -40 °C to +85 °C
Microchip Technology
Number of Channels: 4 amplifiers
Operating Temperature Range: -40°C to +125°C
Package: 14-pin SOIC
Texas Instruments
Amplifier Type: CMOS, Rail-to-Rail Input and Output
Number of Channels: 4 (Quad)
Operating Temperature Range: -40 °C to +125 °C

MCP6004-I/SL

✅ ড্রপ-ইন
Microchip Technology
📦 14-lead SOIC
Quad general-purpose operational amplifier · 4 circuits · 1.8 V to 6 V · 1 MHz · 100 µA · Rail-to-rail · Rail-to-rail · CMOS

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

MCP6004-E/SLVAO

✅ ড্রপ-ইন
📦 14-lead SOIC
Automotive-qualified ordering variant; electrical core is 1.8 V to 6 V with 1 MHz typical gain-bandwidth product

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

TLV9064SIRTER

✅ ড্রপ-ইন
Texas Instruments
📦 14-lead SOIC
4 (Quad) · CMOS, Rail-to-Rail Input and Output · 1.8 V to 5.5 V · 10 MHz · ±0.3 mV (typical) · 0.5 pA (typical) · 10 nV/√Hz · 538 µA (typical)

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

TLV9004

✅ ড্রপ-ইন
📦 14-lead SOIC
Cross-brand low-power quad R-R amplifier candidate; common rail-to-rail function, while bandwidth, offset, and bias-current differences require verification

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

MCP6004-E/SL সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Amplifier Type Quad general-purpose operational amplifier
Number of Channels 4 circuits
Operating Supply Range 1.8 V to 6 V
Input Common-Mode Range Rail-to-rail
Output Swing Rail-to-rail
Typical Gain-Bandwidth Product 1 MHz
Typical Quiescent Current 100 µA
Typical Slew Rate 0.6 V/µs
Typical Input Offset Voltage 4.5 mV
Typical Input Bias Current 1 pA
প্যাকেজ 14-lead SOIC
মাউন্টিং টাইপ Surface mount
Operating Temperature Grade E temperature grade
RoHS Compliance unknown
REACH Compliance unknown
AEC-Q100 Qualification unknown
Lead-Free Status unknown
Halogen-Free Status unknown
Conflict-Mineral Status unknown

MCP6004-E/SL 14-lead soic পিন কনফিগারেশন গাইড

MCP6004-E/SL (14-lead soic প্যাকেজ)-এর পিন কনফিগারেশন। এই অ্যানালগ কম্পোনেন্টে ইনপুট, আউটপুট ও পাওয়ার সাপ্লাই পিন রয়েছে। অফসেট নাল, কম্পেনসেশন ও এনেবল পিন কনফিগারেশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। সিগন্যাল কন্ডিশনিং ও অ্যামপ্লিফায়ার সার্কিটের জন্য আদর্শ।

MCP6004-E/SL-এর জন্য 14-lead soic প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি MCP6004-E/SL.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

MCP6004-E/SL এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Low-Voltage Sensor Signal Conditioning, Portable Battery-Powered Instrumentation, Industrial Control and Automation, Audio Preamplification and Buffering, Data Acquisition and ADC Front Ends, General-Purpose Analog Filtering.

🧩

Low-Voltage Sensor Signal Conditioning

The MCP6004-E/SL fits sensor interfaces that operate from 1.8 V to 6 V and need to amplify or filter signals without wasting supply headroom. Rail-to-rail input operation allows a sensor output near either supply rail to enter the amplifier's common-mode range, while rail-to-rail output improves utilization of the available output swing. Four channels can handle related inputs or provide buffering around a sensor interface. Its typical 1 MHz gain-bandwidth product supports moderate-frequency conditioning, and its typical 100 µA quiescent current limits standing demand in battery-powered equipment. Verify the specific sensor's output range, required accuracy, capacitive loading, and the amplifier's offset and bias-current contributions before finalizing the circuit.

📱

Portable Battery-Powered Instrumentation

The MCP6004-E/SL is useful in portable measurement systems where each additional milliamp of supply demand can shorten operating time. A typical quiescent current of 100 µA for four amplifier channels allows gain, filtering, and buffering functions to be consolidated without multiplying package count. Operation from 1.8 V to 6 V supports compatibility with low-voltage sensors, mixed-signal processors, and compact battery rails. Rail-to-rail input and output behavior is beneficial when the signal occupies a large portion of the available supply range. The engineer should still calculate the complete sleep current, account for sensor and converter consumption, and verify that required signal bandwidth remains compatible with the amplifier's typical 1 MHz gain-bandwidth product.

🏭

Industrial Control and Automation

The MCP6004-E/SL can provide local analog conditioning in industrial controllers, sensor hubs, and condition-monitoring modules. Four channels offer a practical way to process several low-level inputs while keeping the implementation compact in a 14-lead SOIC. The 1.8 V to 6 V operating range suits low-voltage control hardware, and rail-to-rail input and output operation helps preserve signal range on restricted supply rails. Its typical 1 MHz bandwidth is suitable for many slow feedback-control and sensor-filtering loops, but it should not be selected for high-bandwidth motor-control loops requiring substantially faster slew rate. Confirm noise immunity, grounding strategy, output load capability, temperature requirements, and industrial qualification for the deployed equipment.

🎧

Audio Preamplification and Buffering

The MCP6004-E/SL can implement low-level audio preamplification, channel buffering, and simple active filtering when the operating bandwidth is modest. Rail-to-rail input and output capability helps accommodate signals within low-voltage audio rails, while the four-channel package can reduce the number of discrete amplification stages. The typical 1 MHz gain-bandwidth product is appropriate for many audio-control and conditioning paths, although the 0.6 V/µs typical slew rate shown in the product listing can become important for larger signals at higher frequencies. Use the Microchip datasheet's distortion, output-swing, noise, and load-capacitance curves to verify headroom and stability rather than treating the general-purpose amplifier as a high-fidelity audio part by default.

🖥️

Data Acquisition and ADC Front Ends

The MCP6004-E/SL is suitable as an ADC driver, gain stage, or anti-alias filter in moderate-speed data-acquisition systems. A typical 1 MHz gain-bandwidth product provides useful bandwidth for low-rate or medium-rate sensor digitization, while rail-to-rail input and output behavior supports operation on compact 1.8 V to 6 V analog rails. The four channels can handle several inputs when the acquisition system requires parallel conditioning. The critical design checks are settling relative to the conversion interval, noise contributed by the amplifier, output drive into the ADC sample-and-hold input, and the capacitive-load recommendations. Microchip's datasheet application information and AC test conditions should guide the final resistor and capacitor selections.

⚡

General-Purpose Analog Filtering

The MCP6004-E/SL can implement active filters, transimpedance stages, and gain blocks in low-voltage analog subsystems. Its 1 MHz typical gain-bandwidth product supports moderate closed-loop bandwidth, and four channels permit a filter cascade or several independent signal paths in one package. Rail-to-rail operation simplifies designs where the signal can approach the supply limits. Component tolerances still determine the filter's actual accuracy, and the amplifier's input bias current, offset voltage, noise, and output-current capability should be matched to the source impedance and required precision. Use standard design values that account for the amplifier's frequency response and output drive; large resistor values can increase bias-current error, while heavy capacitive loading can affect stability.

What are the key specifications of MCP6004-E/SL that engineers should know?
The MCP6004-E/SL is a four-channel, general-purpose operational amplifier with a 1.8 V to 6 V supply range, rail-to-rail input and output, typical 1 MHz gain-bandwidth product, and typical quiescent current of 100 µA. According to the Microchip MCP6004 product page, it is available in a 14-lead SOIC package. The -E/SL ordering code denotes the standard E-temperature variant in the 14-lead SOIC configuration.
Where can I download the MCP6004-E/SL datasheet PDF?
The official MCP6004 datasheet and supporting documentation are available through the Microchip Technology MCP6004 product page at https://www.microchip.com/en-us/product/MCP6004. Use the manufacturer document for the authoritative pin descriptions, electrical test conditions, typical performance curves, package drawings, and ordering information. The -E/SL suffix identifies a standard-grade 14-SOIC configuration rather than a different amplifier function.
Where can I find the MCP6004 IC pinout?
The MCP6004 IC pinout is shown in the manufacturer datasheet and package documentation associated with the Microchip MCP6004 product page. The MCP6004-E/SL uses a 14-lead SOIC package containing four operational-amplifier channels. Because individual pin assignments were not included in the current product listing, consult the pin-description table in the Microchip datasheet before assigning PCB nets rather than inferring connections from another amplifier model.
Is MCP6004-E/SL rail-to-rail?
Yes, the MCP6004-E/SL supports rail-to-rail input and rail-to-rail output across its 1.8 V to 6 V operating range. According to the Microchip MCP6004 product page, this allows signals to operate close to the positive and negative supply rails. Actual output swing still depends on load, supply voltage, output frequency, and temperature, so the datasheet's output-voltage limit curves should guide design margin.
What is the supply voltage range of the MCP6004 op amp?
The MCP6004-E/SL operates from 1.8 V to 6 V. This range supports low-voltage sensor systems, portable measurement equipment, and embedded analog interfaces. According to Microchip's product description, the same quad amplifier also provides rail-to-rail input and output operation. Supply decoupling and ground-return layout remain important because the amplifier's usable signal bandwidth and output swing vary with supply voltage.
What is the gain-bandwidth product of MCP6004-E/SL?
The MCP6004-E/SL has a typical gain-bandwidth product of 1 MHz. According to the Microchip MCP6004 product page, this bandwidth is suitable for general-purpose signal conditioning with moderate closed-loop bandwidth requirements. For example, noise-gain settings near 10 would provide approximately 100 kHz of ideal closed-loop bandwidth, although slew rate, load, and stability must also be considered.
How much quiescent current does MCP6004-E/SL use?
The MCP6004-E/SL has a typical quiescent current of 100 µA for the quad amplifier. Microchip identifies the MCP6004 as a low-power family designed around a typical 1 MHz gain-bandwidth product. This low supply demand is advantageous in battery-operated sensors and portable instrumentation, while allowing four independent amplifier functions to be consolidated in one 14-lead SOIC.
MCP6004-E/SL vs TLV9064: which is better for low-voltage signal conditioning?
The MCP6004-E/SL and TLV9064 are both low-voltage, rail-to-rail-input/output quad amplifiers intended for similar general-purpose signal-conditioning tasks. The MCP6004-E/SL has a 1.8 V to 6 V operating range and typical 1 MHz gain-bandwidth product. Selection should also consider output-current capability, input-bias-current behavior, noise, offset, package details, and verified pin compatibility for the specific replacement.
MCP6004-E/SL vs TLV9004: what is the difference?
The MCP6004-E/SL is a Microchip quad operational amplifier with rail-to-rail input and output, a 1.8 V to 6 V supply range, and typical 1 MHz gain-bandwidth product. The TLV9004 is identified as a replacement candidate for the MCP6004 family. A final substitution still requires checking every pin, input/output range, stability, slew-rate, load-driving, and temperature-grade requirement against the manufacturer's datasheets.
When should I choose MCP6004-E/SL over another quad rail-to-rail op amp?
Choose MCP6004-E/SL when the design needs four general-purpose amplifiers operating from 1.8 V to 6 V with rail-to-rail input and output, approximately 1 MHz gain-bandwidth product, and low typical quiescent current of 100 µA. Choose another quad amplifier when it offers verified advantages such as lower offset, lower noise, greater output current, wider bandwidth, smaller size, or a temperature grade better matched to the deployment environment.
Is MCP6004-E/SL suitable for battery-powered sensor interfaces?
The MCP6004-E/SL is well suited to battery-powered sensor interfaces because it operates from 1.8 V to 6 V and has typical quiescent current of 100 µA. Rail-to-rail input and output operation can improve utilization of a low-voltage supply. Designers should still verify sensor-signal range, input bias current, noise, output settling, leakage, and the complete system sleep current.
What can replace MCP6004-E/SL?
The MCP6004T-I/SL and TLV9064 are documented replacement candidates for the MCP6004 family, with TLV9004 also discussed as a comparable amplifier. Because MCP6004-E/SL is a specific temperature-grade and ordering-code configuration, the final choice should preserve the 14-lead SOIC footprint, channel pin assignments, 1.8 V to 6 V rail-to-rail behavior, required output swing, and environmental qualification.
Can TLV9064 replace MCP6004-E/SL in the same PCB?
The TLV9064 is a documented replacement candidate for MCP6004-family devices, but installation on the same PCB requires confirmation of the exact TLV9064 package and pinout. According to the Microchip and Texas Instruments replacement discussion, it is an appropriate candidate for evaluation rather than automatic proof of equivalence. Check channel mapping, supply limits, input bias current, output swing, noise, offset, and stability before substitution.
What is the best cross-brand equivalent for MCP6004-E/SL?
The TLV9064 from Texas Instruments is the best-supported cross-brand replacement candidate because the replacement discussion specifically identifies it for MCP6001, MCP6002, and MCP6004 devices. Exact drop-in use still depends on matching the 14-lead SOIC package and pin assignment. Review both datasheets for electrical behavior, output-current limits, temperature range, and qualification requirements before production use.
Where can I buy MCP6004-E/SL online and what is its lead time?
Use the Request a Quote form on this page to request current MCP6004-E/SL availability, lead time, and commercial terms from XAIPART. The component is currently represented by multiple authorized-channel search results for the exact MPN, including 14-SOIC listings, but a live quotation is the appropriate way to confirm stock, scheduled delivery, and order quantity. Commercial availability can change without notice.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা MCP6004-E/SL — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose MCP6004-E/SL for compact, low-voltage analog designs that require four general-purpose amplifier channels, rail-to-rail input and output, operation from 1.8 V to 6 V, and low typical quiescent current. It is a natural fit for sensor conditioning, portable instrumentation, ADC interfaces, and modest-bandwidth filtering. Select MCP6004-I/SL when an industrial temperature grade is required without automotive qualification, and choose MCP6004-E/SLVAO when automotive qualification is needed. Evaluate TLV9064 or TLV9004 when their detailed ratings provide a measurable advantage, such as lower offset, different bias current, or improved output drive. Before replacing the MCP6004-E/SL, verify the exact package, channel pin mapping, supply range, common-mode limits, output swing, stability, and qualification requirements for the intended operating environment.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য MCP6004-I/SL MCP6004-E/SLVAO TLV9064 TLV9004
Brand Microchip Technology Microchip Technology Microchip Technology Texas Instruments Texas Instruments
Package 14-lead SOIC 14-lead SOIC 14-lead SOIC 14-lead SOIC 14-lead SOIC
Amplifier Configuration Quad Quad Quad Quad Quad
Input Common-Mode Range Rail-to-rail Rail-to-rail Rail-to-rail Rail-to-rail Rail-to-rail
Output Swing Rail-to-rail Rail-to-rail Rail-to-rail Rail-to-rail Rail-to-rail

মূল পার্থক্যসমূহ

  • Combines four channels with low typical quiescent current (বনামTLV9064)
  • Broad low-voltage rail-to-rail operating range (বনামTLV9004)
  • Automotive-qualified family alternative with the same core configuration (বনামMCP6004-E/SLVAO)

ডিজাইন নোট

Place the supply bypass capacitors immediately adjacent to the amplifier's supply and ground pins, with the shortest possible return path. Keep sensitive input and feedback traces compact and route them away from switching-converter nodes, clocks, and high-current power wiring. The 14-lead SOIC footprint requires adequate board-edge clearance and a land pattern compatible with the exact package drawing in the Microchip datasheet.

Design feedback networks for the amplifier's approximately 1 MHz typical gain-bandwidth product rather than assuming unlimited bandwidth. For a noise gain of 10, the ideal closed-loop bandwidth is approximately 100 kHz, but the 0.6 V/µs typical slew rate can limit large-signal performance. Check output settling, capacitive loading, and channel-to-channel behavior against the datasheet curves when driving ADC inputs or driving longer cables.

Rail-to-rail input and output does not mean the amplifier can reach the exact supply rails under every load or output state. Preserve the datasheet's input common-mode and output-swing limits, especially at low supply voltage, high temperature, or heavy capacitive loading. Also verify offset voltage and input bias current when the source impedance is high, since the typical 4.5 mV offset and 1 pA bias-current figures can dominate the error budget.

Calculate the complete static and dynamic supply current rather than using only the typical 100 µA quiescent-current value. The supply must support the amplifier's quiescent current, output-current peaks into the load, and the capacitive charging current required by downstream nodes. This is particularly important in portable systems where the MCP6004 operates from a 1.8 V rail and the output waveform has high duty-cycle transitions.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The exact MCP6004-E/SL listing does not state RoHS, REACH, lead-free, halogen-free, or conflict-mineral status. The automotive alternative MCP6004-E/SLVAO is identified as automotive, but no specific AEC-Q100 qualification claim is used for the target device.

ডেটা যাচাই করা হয়েছে: 2026-11-20 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

mcp6004 datasheet mcp6004 op amp mcp6004 pins mcp6004 equivalent mcp6004 datasheet pdf mcp6004 alternative mcp6004 ic pinout MCP6004-E/SL datasheet MCP6004-E/SL pinout MCP6004-E/SL equivalent MCP6004-E/SL replacement MCP6004-E/SL vs TLV9064 Microchip MCP6004-E/SL MCP6004-E/SL price

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Microchip Technology MCP6004-E/SL MCP6004 MCP6004-I/SL MCP6004-E/SLVAO TLV9064 TLV9004 operational amplifier quad amplifier voltage-feedback amplifier general-purpose amplifier rail-to-rail input rail-to-rail output gain-bandwidth product quiescent current slew rate input offset voltage input bias current 14-lead SOIC SOIC package family surface-mount package SMD package sensor signal conditioning data acquisition battery-powered instrumentation
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন