Texas Instruments

MSP430F2101IPW - 16MHz Low-Power 16-Bit MCU | Texas Instruments

MPN: MSP430F2101IPW ✓ সক্রিয়
3.3 V Vdss 20-pin TSSOP (PW) Package 16 MHz Speed 1 KB Memory
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

MSP430F2101IPW সারাংশ

Texas Instruments MSP430F2101IPW is an ultra-low-power 16-bit mixed-signal microcontroller operating at up to 16 MHz, with 1 KB of Flash memory, 128 B of SRAM, a timer, and an analog comparator in a 20-pin TSSOP package. Its 16 general-purpose I/O pins support compact embedded control, sensor acquisition, and low-energy signal-processing applications.

An ultra-low-power microcontroller is a semiconductor designed to complete sensing, control, and communication tasks while consuming very little energy. The MSP430 architecture belongs to the embedded microcontroller hierarchy and combines a 16-bit RISC processor, mixed-signal peripherals, on-chip memory, and multiple low-power operating modes. This integration allows portable instruments and sensor nodes to remain responsive while reducing the energy required during idle periods.

The MSP430F2101 provides a 16-bit CPU with a 16 MHz maximum clock, 1 KB of Flash program memory, and 128 B of SRAM. Its integrated 16-bit timer supports periodic timing and event handling, while the comparator provides a basic analog threshold function without requiring a separate comparator. Sixteen I/O pins give designers access to digital inputs and outputs for sensors, indicators, switches, and host interfaces.

The MSP430x21x1 family combines a compact RISC core with mixed-signal capabilities intended for measurement systems that capture analog signals, convert them into digital values, and process or transmit the results. Five low-power modes help match processor activity to workload demand, making the device suitable for battery-operated equipment where continuous high-speed processing would waste energy.

Typical uses include portable sensor nodes, compact environmental monitors, low-power measurement instruments, simple control panels, and embedded interface modules. The 16-bit architecture supports efficient handling of sensor state and control calculations, while the timer and comparator reduce the need for external discrete components in straightforward measurement and timing designs.

PCB implementation requires attention to decoupling, clock stability, and exposed signal routing. Place the required supply capacitors close to the device, keep the crystal or clock circuit compact, and route high-impedance comparator inputs away from switching nodes. Confirm the selected operating mode, clock source, and pin multiplexing in the device pin description and application guidance before firmware configuration.

This page consolidates the MSP430F2101IPW electrical characteristics, package details, application guidance, drop-in alternatives, and engineering trade-offs into a design-focused reference. It supports faster component selection while preserving the distinction between verified device specifications and parameters that must be confirmed in the manufacturer documentation.

এর জন্য ড্রপ-ইন বিকল্প MSP430F2101IPW — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible MSP430F2101IPW (একই form factor এবং footprint) — পার্থক্য রয়েছে Flash Memory, Package, SRAM, Supply Voltage, ADC Resolution.

Texas Instruments
Package: 14-pin TSSOP (PW)
Supply Voltage: 2.5 V to 3.3 V
ADC Resolution: 16-bit sigma-delta
এর সাথে তুলনা করুন MSP430F2101IPW →
Texas Instruments
Flash Memory: 1 KB
Package: 20-pin TSSOP (PW)
SRAM: 128 B
এর সাথে তুলনা করুন MSP430F2101IPW →
Texas Instruments
Flash Memory: 4 KB (4 K x 8)
SRAM: 256 B
এর সাথে তুলনা করুন MSP430F2101IPW →
Texas Instruments
Flash Memory: 8 KB
Package: 28-TSSOP (PW)
SRAM: 512 B
এর সাথে তুলনা করুন MSP430F2101IPW →

MSP430F2101TPW

✅ ড্রপ-ইন
Texas Instruments
📦 TSSOP-20 (PW)
16-bit RISC · 16 MHz · 1 KB · 128 B · 1.8 V to 3.6 V · 250 µA at 1 MHz and 2.2 V · 0.7 µA · 0.1 µA with RAM retention

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

MSP430F2111IPW

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
📦 TSSOP-20 (PW)
Same MSP430x21x1 family and 20-pin TSSOP footprint; Flash increases from 1 KB to 2 KB while CPU frequency remains 16 MHz.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

MSP430F2121IPW

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
Texas Instruments
📦 TSSOP-20 (PW)
16-bit ultra-low-power mixed-signal microcontroller · 16-bit RISC · 16 MHz · 4 KB (4 K x 8) · 256 B · 16 bit · 62.5 ns · Integrated

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

MSP430F2132IPW

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
Texas Instruments
📦 TSSOP-20 (PW)
16 MHz · 16-bit RISC · 16 bit · 8 KB · 512 B · 10 bit

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

MSP430F2101IPW সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

CPU Architecture 16-bit RISC
সর্বোচ্চ ক্লক ফ্রিকোয়েন্সি 16 MHz
Flash Memory 1 KB
SRAM 128 B
General-Purpose I/O Pins 16 pins
Timer 1 integrated 16-bit timer
Analog Comparator 1 integrated comparator
সাপ্লাই ভোল্টেজ 3.3 V
Low-Power Operating Modes 5 modes
প্যাকেজ 20-pin TSSOP (PW)
Package Body Width 4.40 mm
Package Length 0.173 inch
অপারেটিং তাপমাত্রার পরিসর -40 °C to +85 °C
মাউন্টিং টাইপ Surface mount
Programming Interface No external programming voltage needed
Flash Code Protection Programmable by security fuse
Product Type Mixed-signal ultra-low-power microcontroller

MSP430F2101IPW 0.173 inch পিন কনফিগারেশন গাইড

MSP430F2101IPW (0.173 inch প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।

MSP430F2101IPW-এর জন্য 0.173 inch প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি MSP430F2101IPW.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

MSP430F2101IPW এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Portable Sensor Nodes, Battery-Powered Environmental Monitors, Portable Measurement Instruments, Simple Control and Interface Panels, Low-Power Data Loggers, Low-Energy Industrial Monitoring.

🧩

Portable Sensor Nodes

The MSP430F2101IPW fits compact sensor nodes that must acquire a signal, apply a threshold, and communicate a result without wasting battery energy. Its 16 MHz 16-bit RISC core provides enough processing performance for basic filtering and control logic, while 1 KB of Flash holds a small firmware image and 128 B of SRAM supports working state. The integrated comparator can evaluate an analog threshold directly, reducing external circuitry when the measured signal does not require a dedicated ADC. Five low-power operating modes are valuable when the node spends most of its time asleep. Firmware should disable unused peripherals, configure the timer for the required sampling interval, and use comparator output internally to minimize external switching activity.

🏭

Battery-Powered Environmental Monitors

The MSP430F2101IPW can serve as the control center for a small environmental monitor built around a resistive sensor, digital sensor output, or comparator-based threshold stage. The timer supports periodic measurements, while the 16 general-purpose I/O pins can operate indicator LEDs, sensor enables, and a low-speed host interface. Its 3.3 V supply and five low-power modes allow the monitor to remain operational in battery installations where frequent active processing would increase energy use. Because the device provides 128 B of SRAM and 1 KB of Flash, the application should use a compact data pipeline, retain only recent samples, and transmit summarized results. Comparator inputs should be routed away from switching regulators to avoid false threshold transitions.

🔧

Portable Measurement Instruments

The MSP430F2101IPW is appropriate for portable instruments that combine timing, digital sensing, and a simple analog threshold function in one compact package. Its integrated 16-bit timer can establish measurement intervals, trigger sampling events, or drive timing-dependent output signals. The analog comparator supports thresholding, zero-crossing detection, or simple alert generation, while 16 I/O pins provide control for a display indicator, switch matrix, or serial host connection. The MSP430 architecture and five low-power modes are useful when handheld equipment must preserve operating time between battery changes. Firmware should retain calibration constants in Flash, keep active processing windows short, and test the analog threshold path under the actual source impedance and temperature conditions.

📱

Simple Control and Interface Panels

MSP430F2101IPW can implement a compact control panel or status interface when the design needs local logic, timers, and limited I/O rather than a high-performance processor. Sixteen I/O pins can connect buttons, indicator LEDs, discrete sensors, and output devices, while the timer schedules debounce, flashing, periodic polling, or timeout behavior. The 1 KB Flash capacity and 128 B of SRAM suit compact state machines rather than large graphical interfaces or protocol stacks. A 3.3 V supply simplifies integration with low-energy sensors and digital peripherals. Engineers should assign functions from the device pin table, keep unused inputs in defined states, and use the low-power modes only after confirming that wake-up sources and timing remain compatible with the user experience.

🖥️

Low-Power Data Loggers

The MSP430F2101IPW can form the control section of a low-power data logger for a modest number of digital measurements or comparator events. The 16-bit timer establishes uniform sampling periods, and 128 B of SRAM can hold a bounded working buffer, while 1 KB of Flash accommodates compact acquisition and storage-management firmware. Five low-power modes allow the processor to remain idle between events, which is advantageous in unattended installations. Because memory is limited, use a compact record format and reserve Flash space for calibration values and firmware updates. The comparator is also useful for detecting crossings or thresholds without requiring a general-purpose ADC. Validate input filtering, startup behavior, and storage timing in the final sensor system.

🏭

Low-Energy Industrial Monitoring

The MSP430F2101IPW is suitable for distributed industrial monitoring nodes that supervise discrete inputs and compare sensed voltages against thresholds. The 16 I/O pins support digital sensors and remote indicators, while the comparator handles a basic analog decision without adding another mixed-signal device. Its 16 MHz RISC core can perform lightweight data conditioning, and the integrated timer supports regular polling or event-driven maintenance tasks. The -40 °C to +85 °C operating range makes the industrial temperature grade relevant for equipment-room and controlled-environment deployments. Layout should separate comparator and sensor traces from switching nodes, while firmware should use watchdog and reset behavior appropriate to the monitoring function. Memory limits require disciplined code and data-buffer sizing.

What are the key specifications of MSP430F2101IPW that engineers should know?
The MSP430F2101IPW is a 16-bit ultra-low-power mixed-signal MCU with a maximum clock frequency of 16 MHz, 1 KB of Flash memory, and 128 B of SRAM. According to the Texas Instruments MSP430F2101 product page and datasheet, the device also provides one 16-bit timer, one analog comparator, and 16 general-purpose I/O pins in a 20-pin TSSOP package. Its five low-power modes and 3.3 V supply make it particularly relevant to portable measurement and sensor applications.
Where can I download the MSP430F2101IPW datasheet PDF?
The MSP430F2101IPW datasheet and ordering information are available from the official Texas Instruments MSP430F2101 product page at https://www.ti.com/product/MSP430F2101. The manufacturer also provides a dedicated orderable-parts page for MSP430F2101IPW at https://www.ti.com/product/MSP430F2101/part-details/MSP430F2101IPW. Use the manufacturer documents for the authoritative pin descriptions, electrical limits, timing characteristics, and recommended operating conditions.
Where can I find the MSP430F2101IPW pinout?
The MSP430F2101IPW pinout is documented in the manufacturer datasheet under the device pin information for the 20-pin TSSOP (PW) package. The official ordering page confirms a 20-pin TSSOP package, while the device operates from 3.3 V and exposes 16 general-purpose I/O pins. Use the pin-description table in the Texas Instruments MSP430F2101 documentation when assigning tracks, programming the multiplexed peripherals, and connecting supply, ground, reset, clock, and I/O signals.
Is MSP430F2101IPW suitable for battery-powered sensor systems?
Yes, the MSP430F2101IPW is suitable for battery-powered sensor systems because it combines a 16-bit RISC core with five low-power operating modes. According to the Texas Instruments MSP430F2101 documentation, the device includes 1 KB of Flash, 128 B of SRAM, a timer, a comparator, and 16 I/O pins. These resources support compact acquisition, thresholding, timing, and control functions while allowing the MCU to reduce activity during idle intervals.
What is the difference between MSP430F2101IPW and MSP430F2101TPW?
Both parts use the MSP430F2101 device in a 20-pin TSSOP (PW) package and provide the same core, memory, timer, comparator, and 16 I/O functions. The principal ordering distinction is the temperature-grade code in the part number: MSP430F2101IPW is specified from -40 °C to +85 °C, while the exact limits for MSP430F2101TPW must be confirmed on its individual ordering page. Check temperature requirements and full suffix definitions before approving either ordering code.
What can replace MSP430F2101IPW in a pin-compatible design?
The closest documented replacement is the Texas Instruments MSP430F2101TPW because it uses the same 20-pin TSSOP (PW) family package and the same MSP430F2101 device designation. Other MSP430x21x1-family devices may share the footprint, but differences in Flash, SRAM, peripherals, or temperature grade can affect firmware and board qualification. The Request a Quote form on this page can be used to check replacement availability for the exact ordering code.
When should I choose MSP430F2101IPW over another MSP430 microcontroller?
Choose MSP430F2101IPW when a design needs a compact 20-pin TSSOP controller with a 16 MHz 16-bit core, 1 KB of Flash, 128 B of SRAM, a timer, a comparator, and 16 I/O pins. It is a strong fit for low-power sensing, timing, and basic control tasks that do not require larger memory or more elaborate analog peripherals. Select a larger MSP430 variant when code size, RAM, ADC capability, or interface count would exceed this device's resources.
Is MSP430F2101IPW the same as MSP430F2101TPW?
No, MSP430F2101IPW and MSP430F2101TPW are distinct ordering codes for the MSP430F2101 family, even though both use the 20-pin TSSOP (PW) package. According to the Texas Instruments ordering information, MSP430F2101IPW covers -40 °C to +85 °C. The suffix and temperature range for MSP430F2101TPW must be checked separately, so the parts should not be treated as identical without reviewing the full ordering table.
How much current does MSP430F2101IPW consume in low-power operation?
The MSP430F2101IPW supports five low-power modes, but a single operating-current value cannot be selected without specifying the supply voltage, clock configuration, active peripherals, and workload. According to the Texas Instruments MSP430F2101 datasheet, the device is an ultra-low-power MCU intended for portable measurement systems. Use the datasheet's current-consumption tables and test the actual firmware duty cycle when calculating battery life for a deployed product.
How do I choose between MSP430F2101IPW and a larger MSP430x21x1 device?
Choose MSP430F2101IPW when 1 KB of Flash, 128 B of SRAM, one timer, one comparator, and 16 I/O pins cover the design while preserving a compact 20-pin TSSOP footprint. Move to a larger MSP430x21x1-family device when the application requires more program memory, RAM, analog conversion, timers, or communication interfaces. The larger device may remain pin compatible, but its peripheral multiplexing and electrical requirements must be reviewed before changing the PCB or firmware.
Where can I buy MSP430F2101IPW online?
Use the Request a Quote form on this page to request MSP430F2101IPW pricing, stock confirmation, and lead time for the exact 20-pin TSSOP ordering code. Quote requests should include the target quantity, delivery schedule, and whether reels, cut tape, or another delivery format is acceptable. This avoids selecting a related MSP430 part with a different suffix, temperature grade, or delivery configuration.
What is the price of MSP430F2101IPW?
The current MSP430F2101IPW unit price is obtained through the Request a Quote form on this page. The form should be submitted with the required quantity and packaging preference so the quotation reflects the exact MSP430F2101IPW ordering code. Compare the requested commercial terms against your schedule rather than relying on a generic MSP430 price, because memory size, temperature grade, package suffix, and order quantity can affect availability.
What is the lead time for MSP430F2101IPW?
The current lead time for MSP430F2101IPW is confirmed through the Request a Quote form on this page. Include the required quantity, target receipt date, and acceptable delivery format in the request. Texas Instruments lists MSP430F2101IPW as an orderable 20-pin TSSOP device, but production availability and allocation can vary; a project schedule should be based on the quotation response rather than an unverified estimate.
Is MSP430F2101IPW in stock?
Current stock for MSP430F2101IPW is confirmed through the Request a Quote form on this page. State the required order quantity and preferred delivery method, and identify any date by which material must be allocated. The device is orderable as MSP430F2101IPW in a 20-pin TSSOP package, but availability should not be inferred from general distributor listings or from related part numbers with different suffixes.
What is the best Texas Instruments equivalent for MSP430F2101IPW?
The best documented Texas Instruments alternative for a pin-compatible design is MSP430F2101TPW because it shares the MSP430F2101 device family and 20-pin TSSOP (PW) package. Verify the complete suffix, temperature range, and ordering status before treating it as interchangeable. If the MSP430F2101TPW grade does not meet environmental requirements, retain MSP430F2101IPW or request a quotation for the exact qualified part rather than assuming a broader family member is equivalent.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা MSP430F2101IPW — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose MSP430F2101IPW when a compact, 3.3 V design needs a 16 MHz 16-bit MCU with 1 KB of Flash, 128 B of SRAM, a timer, a comparator, and 16 I/O pins in a 20-pin TSSOP package. Its five low-power modes are particularly useful for battery-powered sensing and portable measurement. Select MSP430F2101TPW when the same base device and footprint are needed but its ordering grade is acceptable after checking temperature and qualification requirements. Consider MSP430F2111IPW or MSP430F2121IPW when the application benefits from 2 KB of Flash, and consider MSP430F2132IPW when 512 B of RAM is more valuable than minimizing memory. Before substitution, confirm pin multiplexing, peripheral availability, firmware assumptions, environmental limits, and power behavior in the manufacturer documentation.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য MSP430F2101TPW MSP430F2111IPW MSP430F2121IPW MSP430F2132IPW
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package TSSOP-20 (PW) TSSOP-20 (PW) TSSOP-20 (PW) TSSOP-20 (PW) TSSOP-20 (PW)
CPU Architecture 16-bit RISC 16-bit RISC 16-bit RISC 16-bit RISC 16-bit RISC
Maximum Clock Frequency 16 MHz 16 MHz 16 MHz 16 MHz 16 MHz
Flash Memory 1 KB 1 KB 2 KB 2 KB 2 KB
SRAM 128 B 128 B 128 B 128 B 512 B
General-Purpose I/O Pins 16 pins 16 pins 16 pins 16 pins 16 pins
Integrated Timer 1 integrated 16-bit timer 1 integrated 16-bit timer 1 integrated 16-bit timer 1 integrated 16-bit timer 1 integrated 16-bit timer
Analog Comparator Integrated Integrated Integrated Integrated Integrated
Supply Voltage 3.3 V 3.3 V 3.3 V 3.3 V 3.3 V

মূল পার্থক্যসমূহ

  • Exact-family ordering alternative with the same package (বনামMSP430F2101TPW)
  • More program memory without changing the 20-pin footprint (বনামMSP430F2111IPW)
  • Four-times the SRAM for buffer-oriented firmware (বনামMSP430F2132IPW)

ডিজাইন নোট

Place all required decoupling capacitors immediately adjacent to the MSP430F2101IPW supply and ground pins, with the shortest possible return path. Keep the clock loop compact and route it away from comparator inputs, I/O switching edges, and any nearby inductor or switching node. Because the device offers only 16 I/O pins, assign multiplexed functions in the pin table before laying out the board to avoid last-minute route changes.

Design the 3.3 V rail for both average demand and short startup transients, then verify it against every operating mode used by the firmware. The five low-power modes can reduce average consumption, but rapid wake events, timer activity, and comparator operation can create current steps. Place bulk energy storage near the MSP430F2101IPW when the source is distant or when the sensor system periodically wakes from a deep idle state.

Treat analog comparator inputs as sensitive nodes even though the device has no dedicated ADC in the target configuration. Keep comparator traces short, provide a defined return path, and avoid routing them parallel to digital outputs or regulator switching nodes. If the source impedance is high, account for leakage, settling, and threshold offsets in firmware; the integrated comparator is most useful when the input signal is conditioned close to the device pin.

Do not assume that any MSP430x21x1-family ordering code is a drop-in replacement. The target has only 1 KB of Flash and 128 B of SRAM, so a family alternative with 2 KB of Flash or 512 B of SRAM changes the memory budget even when the package and core are retained. Also compare the complete suffix and temperature grade, especially when moving from MSP430F2101IPW to MSP430F2101TPW, before approving a substitution.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

No explicit RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification statements appear in the manufacturer and distributor information for this ordering code. AEC-Q100 is not applicable to the standard industrial-temperature ordering code.

ডেটা যাচাই করা হয়েছে: 2026-11-20 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

MSP430F2101IPW datasheet MSP430F2101IPW pinout MSP430F2101IPW datasheet pdf MSP430F2101IPW equivalent MSP430F2101IPW replacement MSP430F2101IPW vs MSP430F2101TPW MSP430F2101IPW footprint MSP430F2101IPW price MSP430F2101IPW stock Texas Instruments MSP430F2101IPW MSP430F2101IPW sensor node MSP430F2101IPW 20 pin TSSOP

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Texas Instruments MSP430F2101IPW MSP430F2101 MSP430F2101TPW MSP430F2111IPW MSP430F2121IPW MSP430F2132IPW MSP430x21x1 MSP430 16-bit RISC microcontroller mixed-signal microcontroller ultra-low-power microcontroller embedded microcontroller semiconductor TSSOP-20 PW package surface-mount package 3.3 V 16 MHz 1 KB Flash memory 128 B SRAM 16-bit timer analog comparator portable sensor node portable measurement instrument
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন