NXP Semiconductors

PCA9512D - 2.7V Hot-Swap I2C Buffer | NXP Semiconductors

MPN: PCA9512D ✗ জীবনকালের সমাপ্তি
2.7 V to 5.5 V Vdss 1.8 mA Id 8-pin SOIC Package 400 kHz Speed
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

PCA9512D সারাংশ

NXP Semiconductors PCA9512D is a hot-swappable I2C and SMBus buffer designed for level shifting between host and peripheral sections of a live bus. The device operates from a 2.7 V to 5.5 V supply, supports operation up to 400 kHz according to the distributor product listing, and has a specified propagation delay of 5.0 ns. It is packaged in an 8-pin SOIC.

An I2C bus buffer is an interface IC that divides a potentially long or electrically incompatible bus into separate buffered segments. The PCA9512D adds hot-swap capability so that an I/O card can be inserted into a powered backplane without corrupting the data or clock buses. This function places it within the hierarchy of I2C interface IC, bus buffer, level translator, and interface semiconductor.

The principal benefit is electrical isolation between the two sides of the buffer. Each side can present a defined low-level output through the I2C bus output characteristics, while the device provides independent conductive paths for SDA and SCL. The listed operating supply range supports both 3.3 V and 5 V system environments, and the 400 kHz bus rating accommodates standard-speed I2C communication used by many embedded, industrial, and expansion-card systems.

A hot-swappable buffer typically contains a conventional bidirectional I2C data channel and a clock-channel arrangement designed to isolate the card-side bus from the host-side bus. This separation reduces the risk that card insertion, removal, or electrical loading on the peripheral side will corrupt an active host transaction. The PCA9512D is therefore useful when system reliability during maintenance or card replacement matters more than the minimal cost and simplicity of a direct bus connection.

Typical uses include hot-pluggable I/O cards, industrial backplanes, test systems, mezzanine modules, and embedded expansion boards. In these systems, the PCA9512D can isolate a removable peripheral from the main I2C controller, allowing the peripheral-side wiring and capacitance to be disconnected electrically from the host bus during card replacement. The 5.0 ns propagation delay and 400 kHz operating capability support low-to-moderate-speed control and management buses.

PCB implementation requires attention to supply decoupling, trace routing, and the separation between host-side and card-side nets. Keep the clock and data routes short, preserve the ground reference, and place the device close to the bus segment that requires isolation. Because the product is discontinued, engineers should verify the complete system bus capacitance, rise-time, pull-up arrangement, and card-insertion behavior before treating it as a new-design choice.

This product page combines the manufacturer status, historical datasheet characteristics, distributor identification, package information, pricing evidence, and practical replacement analysis. It also distinguishes a genuine same-family option from packaging variants or functionally similar interface ICs that do not provide a verified pin-to-pin drop-in path.

এর জন্য ড্রপ-ইন বিকল্প PCA9512D — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible PCA9512D (একই form factor এবং footprint) — পার্থক্য রয়েছে Hot-Swap Support, Number of Channels, Package.

NXP Semiconductors
Hot-Swap Support: Yes (precharge required on card side)
Number of Channels: 1
Package: 8-pin SOIC (SO-8)
এর সাথে তুলনা করুন PCA9512D →

PCA9512AD

✅ ড্রপ-ইন
NXP Semiconductors
📦 8-pin SOIC
Level-shifting hot-swappable I2C/SMBus buffer · 1 · 400 kHz · 2.0 V to 5.5 V · 2.0 V to 5.5 V · 3 mA (I2C spec compliance) · Standard, Fast, Fast-Plus (400 kHz) · Yes (precharge required on card side)

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

PCA9512D বিশেষণ

Product Type Hot-swappable I2C and SMBus buffer
Supply Voltage Range 2.7 V to 5.5 V
Maximum I2C Bus Frequency 400 kHz
Propagation Delay 5.0 ns
সাপ্লাই কারেন্ট 1.8 mA
ইনপুট ক্যাপাসিট্যান্স 10 pF
Transceiver Type I2C logic
Bus Type I2C-Bus and SMBus switch
Number of Channels 1 channel
প্যাকেজ 8-pin SOIC
মাউন্টিং টাইপ Surface mount
Hot-Swap Support Yes
Data Lines 2 lines: I2C data and clock

PCA9512D 8-pin soic পিন কনফিগারেশন গাইড

PCA9512D (8-pin soic প্যাকেজ)-এর পিন কনফিগারেশন। পিন নম্বরিং, ফাংশন এবং সংযোগ ডায়াগ্রাম প্রস্তুতকারকের ডেটাশিটে সংজ্ঞায়িত করা আছে। সঠিক ফুটপ্রিন্ট এবং সোল্ডারিং নির্দেশিকার জন্য এটি দেখুন।

PCA9512D-এর জন্য 8-pin soic প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি PCA9512D.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

PCA9512D এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Hot-Pluggable I2C I/O Cards, Industrial Backplane Isolation, Removable Test and Measurement Modules, Embedded Expansion Backplanes, Sensor and Configuration Buses, Legacy Communication Equipment.

🖥️

Hot-Pluggable I2C I/O Cards

PCA9512D fits between a host controller and a removable I2C card that may be inserted into a powered system. Its hot-swappable buffering function separates the host-side and card-side clock and data paths, reducing the chance that a transient during card insertion will corrupt an active bus transaction. The 400 kHz listed operating capability is suitable for standard-speed control buses, while the 5.0 ns propagation delay limits timing impact. Engineers should use suitable pull-ups on each isolated segment and verify insertion behavior, bus capacitance, and ground continuity in the complete card and backplane design.

🏭

Industrial Backplane Isolation

PCA9512D can divide an industrial backplane into host-side and equipment-side I2C segments, helping limit the effect of a plugged or removed module on the central bus. Its 2.7 V to 5.5 V operating range accommodates common industrial logic levels, and the 400 kHz rating matches many sensor, monitoring, and configuration buses. The design must maintain a common ground, provide appropriate pull-up networks, and account for cable capacitance and edge-rate degradation. Because the device is obsolete, a new industrial platform should evaluate currently supported interface buffers before committing the architecture.

🔧

Removable Test and Measurement Modules

PCA9512D is appropriate for test fixtures or removable instrument modules that connect over an I2C control bus while the rest of the system remains energized. Buffering the host and module sides limits disturbance from module insertion and allows the peripheral section to be designed with its own pull-up arrangement. The listed 5.0 ns propagation delay and 400 kHz maximum frequency fit low-speed control traffic rather than high-bandwidth data acquisition. Validate connector sequencing, isolation during insertion, and cable rise time, and specify a supported interface buffer when the requirement is not limited to legacy hardware.

⚡

Embedded Expansion Backplanes

PCA9512D can buffer an embedded processor bus from a plug-in expansion card, reducing loading and limiting disturbance when the card is serviced. The 8-pin SOIC implementation is convenient for compact interface sections, and the 2.7 V to 5.5 V supply range supports both 3.3 V and 5 V logic systems. The 400 kHz listing is appropriate for configuration, status, and low-rate peripheral traffic. Place the buffer close to the connector or card-side header, keep clock and data traces matched where practical, and check whether the host and peripheral sides use compatible logic thresholds.

🧩

Sensor and Configuration Buses

PCA9512D can segment a sensor or configuration bus from a main controller when the wiring is exposed to insertion, cable loading, or different logic environments. Its listed 400 kHz capability matches common environmental-sensor and low-speed configuration traffic, while the isolated sections allow pull-up placement to be optimized for each side. The 1.8 mA supply current and 10 pF input capacitance figures provide useful design context, but cable length, bus capacitance, and rise time remain the dominant practical constraints. Confirm timing margins in the assembled system rather than relying only on the nominal frequency rating.

🌐

Legacy Communication Equipment

PCA9512D can support maintenance or repair of legacy communication equipment whose I2C-compatible expansion cards must be isolated from a live controller bus. The discontinued status makes it especially relevant for sustaining existing hardware rather than starting a new design. Its hot-swap function targets insertion into an energized backplane, and its 2.7 V to 5.5 V supply range covers many older 3.3 V and 5 V subsystems. Before reuse, verify the obsolete part's condition, traceability, lead-free requirements, exact pinout, and whether the replacement program can accept a currently supported interface buffer.

What is the PCA9512D?
The PCA9512D is an NXP Semiconductors hot-swappable I2C and SMBus buffer used to isolate host-side and peripheral-side bus segments. According to the manufacturer product page, the device is discontinued and remains available for historical reference. Its key functions include level shifting, hot-swap protection for live card insertion, and separation of the data and clock paths so activity on one side is less likely to corrupt the other.
What is the operating voltage of PCA9512D?
The PCA9512D operates from 2.7 V to 5.5 V. The distributor specification listing identifies the same 2.7 V minimum and 5.5 V maximum supply limits, making the device applicable to conventional 3.3 V and 5 V I2C systems. Designers should use the manufacturer datasheet when checking absolute maximum ratings, logic thresholds, and decoupling requirements for the exact ordering package.
What is the maximum I2C frequency of PCA9512D?
The PCA9512D is listed for operation up to 400 kHz. This rating supports standard-speed I2C communication used by many embedded controllers, sensors, converters, and expansion cards. Bus capacitance, pull-up resistance, trace length, rise time, and the peripheral-side loading remain important practical constraints, so a nominal 400 kHz device rating should not be treated as a guarantee for every board layout.
Where can I download the PCA9512D datasheet PDF?
The official PCA9512D datasheet can be located through the NXP Semiconductors product page at https://www.nxp.com/products/PCA9512D. The product page identifies the device as discontinued and provides historical product information. Historical copies of the manufacturer PDF are also indexed by datasheet repositories, but the NXP page remains the preferred source for the authoritative device description, lifecycle status, and supporting documentation.
Where can I find the PCA9512D pinout?
The PCA9512D pin assignment is found in the connection diagram and pin-description table of the manufacturer datasheet. The distributor product listing identifies the device as an 8-pin SO package, but the searchable listing text does not expose every terminal name. Use the official datasheet when assigning the host-side and card-side clock and data nets, supply connections, and grounding before laying out the PCB.
What can replace the PCA9512D?
PCA9512AD is the closest identified same-family option because it appears in a direct comparison with PCA9512D,112. Its suitability still depends on confirming that the exact ordering code uses the same 8-pin SOIC footprint and identical terminal assignments. Packaging suffixes such as PCA9512D,112 and PCA9512D,118 are not separate functional alternatives because they identify orderable forms of the PCA9512D family rather than distinct replacements.
Is PCA9512AD a drop-in replacement for PCA9512D?
PCA9512AD is a same-family candidate, but it should be treated as a conditional drop-in option rather than an unconditional substitute. The available comparison confirms a relationship between PCA9512AD and PCA9512D,112, while the exact pin mapping, electrical limits, and ordering package must still be checked. Review the datasheet pin description, supply range, bus frequency, and hot-swap behavior before approving a replacement.
PCA9512D vs PCA9512AD — which is better for a hot-pluggable I2C card?
PCA9512AD is the relevant alternative to evaluate for a hot-pluggable I2C card because it belongs to the same PCA9512 family. The PCA9512D is specifically described as a hot-swappable I2C and SMBus buffer with a 2.7 V to 5.5 V supply range. Select PCA9512AD only after confirming an identical 8-pin SOIC pinout and equivalent electrical limits in the manufacturer documentation for the exact part being assembled.
Is PCA9512D suitable for a live backplane?
Yes, PCA9512D is specifically designed for hot-swappable I2C and SMBus buffers used with live backplanes. The hot-swap function isolates the card-side bus from the host-side bus, reducing the risk of corruption when an I/O card is inserted or removed. Actual insertion performance still depends on correct bus isolation, pull-ups, capacitance, grounding, and the behavior of every device connected to the card-side segment.
Is PCA9512D in stock and what is its lead time?
The manufacturer identifies PCA9512D as discontinued, and current inventory must be confirmed separately for the exact ordering code. Use the Request a Quote form on this page to state the required package suffix, quantity, date code, and acceptable sourcing conditions. This gives procurement a precise request while avoiding an unsupported claim about current stock, delivery schedule, or minimum order quantity.
How much does PCA9512D cost?
Current pricing for an obsolete component depends on the exact ordering suffix, quantity, condition, and market availability. Use the Request a Quote form on this page for a current response for PCA9512D and specify whether the requirement is new, factory-sealed, or obsolete stock. The structured pricing area should be used for any live commercial value rather than relying on a historical catalog amount.
Where can I buy PCA9512D online?
Use the Request a Quote form on this page to request PCA9512D from XAIPART and provide the exact package suffix, target quantity, required date code, and delivery destination. Because NXP labels PCA9512D as discontinued, a useful request should distinguish normal distribution stock from factory-sealed or approved-obsolete inventory and should identify whether traceability documentation is required.
What are the key specifications of PCA9512D that engineers should know?
The key PCA9512D specifications are a 2.7 V to 5.5 V supply range, operation up to 400 kHz, 5.0 ns propagation delay, 1.8 mA supply current, 10 pF input capacitance, and an 8-pin SOIC package. NXP describes the device as a level-shifting, hot-swappable I2C and SMBus buffer. These values position it for isolated, standard-speed I2C bus segments in systems that tolerate a discontinued component.
When should I choose PCA9512D instead of a direct I2C connection?
Choose PCA9512D when a removable I/O card must connect to a powered I2C bus without allowing peripheral-side loading or activity to corrupt the host transaction. A direct connection is simpler and less costly for fixed, short, lightly loaded buses. The buffered approach becomes more valuable when card insertion, card removal, segment capacitance, voltage compatibility, or fault isolation justifies the added device and layout complexity.
Does PCA9512D support RoHS and REACH compliance?
The searchable product information does not provide a definitive RoHS or REACH declaration for PCA9512D. Because the manufacturer labels the device as discontinued, engineers should request current compliance documentation for the exact ordering code and condition before placing it in a new regulated assembly. Until that documentation is confirmed, the compliance status should be treated as unknown rather than assumed from the component category or package.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা PCA9512D — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose PCA9512D when maintaining a legacy hot-pluggable I2C or SMBus system where the host and removable card must be electrically separated during insertion or removal. Its 2.7 V to 5.5 V supply range, 400 kHz listed bus capability, and 5.0 ns propagation delay fit standard-speed control buses operating from common 3.3 V or 5 V rails. Consider PCA9512AD only after confirming an identical 8-pin SOIC pinout and equivalent electrical limits; ordering suffixes such as PCA9512D,112 and PCA9512D,118 are packaging forms rather than separate functional replacements. For a new design, favor a currently supported interface buffer unless a lifecycle-risk review formally approves the obsolete device. Direct wiring remains preferable for a short, fixed, lightly loaded bus where hot-swap isolation is unnecessary.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য PCA9512AD
Package 8-pin SOIC 8-pin SOIC
Brand NXP Semiconductors NXP Semiconductors

মূল পার্থক্যসমূহ

  • Purpose-built hot-swap isolation (বনামPCA9512AD)
  • Broad conventional logic-supply compatibility (বনামPCA9512AD)
  • Standard-speed I2C operation with low listed delay (বনামPCA9512AD)

ডিজাইন নোট

Route the host-side and card-side clock and data nets as separate physical branches from the PCA9512D. Keep the device close to the card connector when its purpose is hot-plug isolation, shorten both branches, and provide a continuous ground path beneath the interface area. Use the manufacturer pin-description table to confirm which I2C pins belong to each side before assigning connector and test-point labels.

Choose pull-up resistors independently for each isolated bus segment, and calculate the resulting rise time from capacitance, resistor value, and the I2C specification rather than from the 400 kHz frequency label alone. Maintain symmetry between SDA and SCL where practical. Confirm that the card-side low-level voltage and the buffer's propagation delay leave adequate margin at the highest operating bus rate.

Do not treat PCA9512D,112 and PCA9512D,118 as different functional replacements for the base PCA9512D; these are ordering forms that must also match the required package, tape-and-reel orientation, temperature range, and marking. Similarly, do not substitute a generic I2C buffer unless its host-side and card-side pin mapping, voltage levels, propagation delay, and hot-swap behavior have all been verified.

Follow the manufacturer supply and decoupling recommendations when placing the 2.7 V to 5.5 V device. Place the bypass capacitor close to the supply and ground pins, provide adequate return-current paths, and check that the selected system voltage remains within the operating range under transient conditions. The listed 1.8 mA supply current describes normal device consumption, not the additional loading introduced by the connected I2C pull-ups.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The available manufacturer and distributor information does not state definitive RoHS, REACH, lead-free, halogen-free, conflict-minerals, or AEC-Q100 status for PCA9512D. AEC-Q100 is not applicable because this is an interface IC rather than an automotive-qualified device designation.

ডেটা যাচাই করা হয়েছে: 2026-11-19 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

PCA9512D datasheet PCA9512D pinout PCA9512D datasheet pdf PCA9512D equivalent PCA9512D replacement PCA9512D vs PCA9512AD PCA9512D SOIC-8 PCA9512D hot swap buffer PCA9512D I2C application circuit PCA9512D price PCA9512D stock NXP PCA9512D PCA9512D 400kHz PCA9512D footprint what can replace PCA9512D

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

NXP Semiconductors PCA9512D PCA9512AD PCA9512D,112 PCA9512D,118 hot-swappable I2C buffer hot-swappable SMBus buffer I2C bus buffer I2C interface IC level-shifting buffer bidirectional bus transceiver live-backplane insertion 2.7 V to 5.5 V supply 400 kHz I2C 5.0 ns propagation delay 1.8 mA supply current 10 pF input capacitance 8-pin SOIC SOIC package family surface-mount package pull-up resistor I2C data line I2C clock line legacy system maintenance
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন