PCM1772PWR - 24-Bit Stereo DAC with Line Output | Texas Instruments
MPN: PCM1772PWR ✓ সক্রিয়PCM1772PWR সারাংশ
A DAC converts digital audio samples into an analog voltage that can drive an audio amplifier, headphone stage, mixer, or line-level input. The PCM1772PWR is a stereo converter with two analog output channels and integrated line-output circuitry, reducing the need for separate output buffers in many compact audio products. Its 24-bit data resolution is suitable for CD-derived audio, digital media players, communication terminals, and embedded audio equipment.
The PCM1772 uses TI’s enhanced multilevel delta-sigma architecture, combining noise shaping with multilevel amplitude quantization to improve dynamic performance and tolerance to clock and data errors. The 98 dB SNR specification indicates a low-noise conversion path, while the integrated line-output amplifier simplifies analog routing to downstream circuitry. The serial three-wire interface reduces pin count compared with parallel DAC architectures and supports digital audio from microcontrollers, decoders, and audio processors.
Typical applications include portable and compact audio equipment, USB and digital-audio accessories, communication consoles, consumer audio modules, and low-voltage stereo playback systems. The 16-pin TSSOP package also simplifies PCB assembly in designs where surface-mount construction is required.
When designing around the PCM1772PWR, pay particular attention to digital-interface timing, analog output filtering, supply decoupling, and the distinction between digital ground and analog ground connections. Use the manufacturer datasheet pin-description table and recommended application circuit when assigning signal, power, and return paths on the PCB.
এর জন্য ড্রপ-ইন বিকল্প PCM1772PWR — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই সিরিজের ভ্যারিয়েন্ট
একই সিরিজের মডেল যেগুলো drop-in compatible PCM1772PWR (একই form factor এবং footprint).
PCM1772PW
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →PCM1772PWG4
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
PCM1772PWR.B
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
PCM1772PWR সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Device Type | Stereo audio digital-to-analog converter (DAC) |
| Data Resolution | 24 bit |
| স্যাম্পলিং রেট | 50 kHz |
| Digital Interface | I2S-compatible serial interface |
| ইন্টারফেস টাইপ | 3-wire serial |
| আউটপুট কনফিগারেশন | Stereo voltage output |
| Signal-to-Noise Ratio | 98 dB |
| Output Circuitry | Integrated line-out amplifier |
| Control | Software control |
| Converter Architecture | Enhanced multilevel delta-sigma architecture |
| Noise Shaping | Yes |
| Amplitude Quantization | Multilevel |
| প্যাকেজ | 16-pin TSSOP (PW) |
| মাউন্টিং টাইপ | Surface Mount |
PCM1772PWR 16-pin tssop (pw) পিন কনফিগারেশন গাইড
PCM1772PWR (16-pin tssop (pw) প্যাকেজ)-এর পিন কনফিগারেশন। এই অ্যানালগ কম্পোনেন্টে ইনপুট, আউটপুট ও পাওয়ার সাপ্লাই পিন রয়েছে। অফসেট নাল, কম্পেনসেশন ও এনেবল পিন কনফিগারেশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। সিগন্যাল কন্ডিশনিং ও অ্যামপ্লিফায়ার সার্কিটের জন্য আদর্শ।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি PCM1772PWR.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
PCM1772PWR এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Compact Digital Audio Playback, USB Audio Accessory, Portable Media Player, Communication Terminal Audio, Digital Audio Module, Low-Noise Stereo Line Output.
Compact Digital Audio Playback
The PCM1772PWR fits compact playback equipment because it combines a 24-bit stereo conversion path with integrated line-output circuitry in a 16-pin TSSOP package. A microcontroller or audio decoder can provide I2S-compatible clock and data, while the converter generates two analog stereo outputs for a downstream amplifier. The 98 dB SNR specification supports low-noise playback from CD-derived or compressed digital sources. Designers should follow the reference circuit for decoupling and output filtering, and verify the selected amplifier input range against the DAC output voltage.
সুপারিশকৃত
USB Audio Accessory
A USB audio accessory can use the PCM1772PWR as the stereo analog-output stage after a USB audio controller decodes the digital stream. The 3-wire serial interface reduces board-routing requirements, and the integrated line-output circuitry simplifies the transition from the digital converter to an analog headphone or line amplifier. The 24-bit resolution preserves source detail for listening devices, while the 98 dB SNR helps maintain a quiet noise floor. Keep USB and digital processor traces away from the analog outputs and use the datasheet filter network.
সুপারিশকৃত
Portable Media Player
The low-power stereo DAC architecture of the PCM1772PWR suits portable media players where analog conversion must follow a battery-limited digital audio path. Its integrated line-out amplifier can reduce the need for a separate output buffer, while the small TSSOP-16 footprint supports dense board layouts. The 50 kHz sampling-rate capability covers standard-rate digital audio. Before release, confirm supply-voltage limits, quiescent current, startup behavior, and headphone drive requirements in the manufacturer datasheet.
সুপারিশকৃত
Communication Terminal Audio
Voice terminals and communication equipment can use the PCM1772PWR to produce stereo line-level audio from a digital speech or conferencing processor. The integrated line-out stage provides a defined analog destination for the serial digital stream, while 24-bit resolution supports modern digital audio formats. The 98 dB SNR specification is useful for intelligibility-focused listening and conferencing designs. Maintain a continuous analog ground path and decouple the supply close to the device to prevent digital switching activity from modulating the output.
সুপারিশকৃত
Digital Audio Module
The PCM1772PWR is appropriate for a pluggable or embedded digital audio module that exposes analog stereo outputs to a carrier board. Its 3-wire interface permits a short digital connection from an audio codec or processor, and the 16-pin TSSOP package simplifies surface-mount assembly. The integrated line-out amplifier allows a compact module to provide usable analog outputs without a separate discrete buffer. Validate connector grounding, analog output filtering, and channel matching during prototype testing.
সুপারিশকৃত
Low-Noise Stereo Line Output
For designs requiring a clean stereo line-level source, the PCM1772PWR combines 24-bit conversion, a 98 dB SNR specification, and integrated line-output amplifiers. The device can feed a mixer, preamplifier, or line-input stage through the recommended external filtering network. Its delta-sigma conversion architecture uses noise shaping and multilevel amplitude quantization to improve dynamic performance. Pay attention to output loading and analog filter selection, and compare measured THD+N and channel separation with the system requirements rather than relying only on headline SNR.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা PCM1772PWR — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | PCM1772PW | PCM1772PWG4 | PCM1772PWR.B |
|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | TSSOP-16 (PW) | TSSOP-16 (PW) | TSSOP-16 (PW) | TSSOP-16 (PW) |
| Device Type | Stereo audio DAC with line-out | Stereo audio DAC with line-out | Stereo audio DAC with line-out | Stereo audio DAC with line-out |
| Resolution | 24 bit | 24 bit | 24 bit | 24 bit |
| Sampling Rate | 50 kHz | 50 kHz | 50 kHz | 50 kHz |
| Signal-to-Noise Ratio | 98 dB | 98 dB | 98 dB | 98 dB |
| Digital Interface | I2S-compatible, 3-wire serial | I2S-compatible, 3-wire serial | I2S-compatible, 3-wire serial | I2S-compatible, 3-wire serial |
| Output Circuitry | Integrated line-out amplifier | Integrated line-out amplifier | Integrated line-out amplifier | Integrated line-out amplifier |
মূল পার্থক্যসমূহ
- Integrated line-output circuitry simplifies the analog stage (বনামGeneric discrete-output audio DAC)
- 24-bit conversion with a 98 dB SNR specification (বনামLower-resolution audio DAC)
- Compact 16-pin TSSOP interface and package (বনামParallel-interface DAC with a larger package)
ডিজাইন নোট
Route the digital clock and data as short, continuous traces and keep the analog outputs away from switching nodes and high-current return paths. Place supply-decoupling capacitors close to the relevant device pins and follow the TI reference circuit for the capacitor values and placement. Provide an uninterrupted analog ground reference beneath and around the converter so the line outputs share a low-impedance return with the downstream amplifier.
Verify the serial-interface timing and supported data format against the PCM1772 datasheet before connecting a source device. The I2S-compatible three-wire interface reduces routing complexity, but clock jitter, source levels, and edge timing can still affect conversion quality. Use the recommended digital filtering and analog reconstruction network, and measure THD+N, channel separation, and output level on the assembled board rather than assuming ideal source behavior.
Do not substitute by package appearance alone. A TSSOP-16 audio DAC can use a different pin assignment, supply sequence, output range, or digital format. For PCM1772PWR alternatives, verify every pin against the manufacturer datasheet and confirm the output-voltage range against the receiving amplifier. Also distinguish ordering codes that change tape-and-reel or green-rocess handling from genuinely different electrical devices.
কমপ্লায়েন্স তথ্য
The verified manufacturer and distributor listings identify the PCM1772 device, package, resolution, sampling rate, SNR, interface, and line-out functions but do not state the individual compliance declarations.