PI7C8150AMAE - 2-Port 66MHz PCI Bridge | Diodes Incorporated
MPN: PI7C8150AMAE ✗ জীবনকালের সমাপ্তিPI7C8150AMAE সারাংশ
A PCI bridge is an interface IC that connects two Peripheral Component Interconnect bus segments and manages transaction flow between host and peripheral devices. Within the broader semiconductor hierarchy, this component is a PCI interface IC, a bus controller, and an integrated circuit intended for computer expansion and embedded legacy I/O systems. The PI7C8150AMAE specifically combines a 2-port topology with a 66 MHz maximum PCI clock and a 3.3 V supply requirement.
The principal verified characteristics are a 2-port PCI-to-PCI configuration, a 66 MHz maximum operating clock, a 3.3 V supply voltage, and a commercial operating-temperature range of 0°C to 85°C. These specifications make the bridge relevant to PCI industrial controllers, embedded computer platforms, communication equipment, test systems, and industrial adapters that still rely on parallel PCI infrastructure. Its large FQFP footprint provides the physical pin count expected for two independently bridged PCI interfaces.
The PI7C8150AMAE is a legacy interface device rather than a general-purpose processor, so its design value depends on maintaining a compatible host bus, connector arrangement, termination network, clocking scheme, and software configuration. A bridge installation must account for the 3.3 V supply requirement, the 0°C to 85°C operating range, and the pin-intensive 208-pin FQFP layout. The verified source snippets do not provide the complete electrical timing tables, maximum current ratings, internal divider values, or the complete pin assignment.
Typical deployment uses place the bridge between a primary PCI bus and a secondary PCI segment. Because the component is a two-port bridge, it can support bus-segment connectivity without the external discrete buffering normally required when extending a PCI topology. Integration can reduce board complexity, although the FQFP package requires careful escape routing, ground-plane continuity, and compliant power distribution. The 66 MHz clock limit also defines the performance envelope for attached PCI peripherals.
Designers should verify all timing, electrical, reset, clock, and pin-level requirements against the manufacturer datasheet before layout or procurement. In particular, verify PCI specification support, bus-width details, input and output current limits, enable sequencing, peripheral connect/disconnect behavior, and the exact meaning of all 208 pins. Distributor availability and pricing should also be checked because the visible search data does not establish a uniform quantity-price schedule for this exact MPN.
This page consolidates verified distributor and manufacturer-source references, separates known specifications from missing technical fields, and identifies a same-family base-frequency alternative for engineers who need a drop-in comparison. The data also records the package, operating conditions, sourcing links, and the technical checks required for a safe PCI-bus integration rather than inferring unverified timing or pin values.
এর জন্য ড্রপ-ইন বিকল্প PI7C8150AMAE — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
PI7C8150AMAE-33
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
PI7C8150AMAE সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Device Type | Line / Bus Controller |
| PCI Bridge Type | 2-Port PCI-to-PCI Bridge |
| Number of PCI Ports | 2 ports |
| Maximum PCI Clock Frequency | 66 MHz |
| সাপ্লাই ভোল্টেজ | 3.3 V |
| অপারেটিং তাপমাত্রা | 0°C to +85°C |
| Package Type | FQFP-208 |
| Package Dimensions | 28 mm × 28 mm |
| মাউন্টিং টাইপ | Surface Mount |
| অপারেটিং তাপমাত্রার পরিসর | 0°C to +85°C |
PI7C8150AMAE 28 mm × 28 mm পিন কনফিগারেশন গাইড
PI7C8150AMAE (28 mm × 28 mm প্যাকেজ)-এর পিন কনফিগারেশন। এই পাওয়ার ডিভাইসে গেট, ড্রেন ও সোর্স টার্মিনাল রয়েছে। নন-পোলারাইজড প্যাকেজের ক্ষেত্রে সঠিক পিন 1 ওরিয়েন্টেশন ও ফুটপ্রিন্ট বিবরণের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। সাধারণ অ্যাপ্লিকেশনগুলির মধ্যে রয়েছে পাওয়ার সাপ্লাই ডিজাইন, মোটর ড্রাইভিং এবং লোড সুইচিং।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি PI7C8150AMAE.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
PI7C8150AMAE এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Embedded PCI Expansion Systems, Industrial PCI Data Acquisition, Communication Equipment Backplanes, Legacy PCI Test Systems, Medical and Control Equipment Interfaces, PCI Storage and Network Adapters.
Embedded PCI Expansion Systems
The PI7C8150AMAE fits embedded platforms that must extend a PCI bus with a second PCI segment. Its verified 2-port PCI-to-PCI architecture and 66 MHz maximum clock support legacy PCI peripheral cards without requiring an external discrete bridge. The 3.3 V supply matches conventional PCI interface power requirements. Before layout, engineers should confirm the complete pinout, timing budget, reset behavior, and enable sequence in the manufacturer datasheet because these details are not contained in the supplied source excerpts. The 208-pin FQFP also requires a footprint with adequate escape-routing space and a continuous ground reference.
সুপারিশকৃত
Industrial PCI Data Acquisition
The PI7C8150AMAE is appropriate for industrial data-acquisition controllers that retain PCI-compatible measurement cards. Its two-port bridge arrangement can connect the host and acquisition segments, while the 66 MHz bus clock establishes the supported operating envelope for older parallel PCI peripherals. The verified 0°C to 85°C range suits many indoor commercial and industrial environments, but extended-temperature requirements need separate qualification. Designers should budget connector routing, clock distribution, bus termination, and the 208-pin FQFP escape paths before committing the board layout.
সুপারিশকৃত
Communication Equipment Backplanes
PI7C8150AMAE can support communication equipment that retains PCI-based line cards or controller modules. The 2-port PCI-to-PCI topology provides a controlled bridge between primary and secondary bus segments, and the 66 MHz operating limit matches conventional PCI timing expectations. Its 3.3 V supply is compatible with many legacy interface designs. The principal implementation concern is the 208-pin FQFP: pin escape routing, decoupling placement, ground continuity, and connector-to-bridge signal integrity must be planned together rather than treated as independent schematic tasks.
সুপারিশকৃত
Legacy PCI Test Systems
The PI7C8150AMAE fits laboratory and production test systems built around legacy PCI cards because it provides two bridged PCI ports at up to 66 MHz. This allows a test controller to separate primary host traffic from a peripheral segment while retaining compatibility with established PCI modules. The device operates from 3.3 V and across 0°C to 85°C, but the available verified snippets do not establish current limits, timing margins, or lifecycle classification. Engineers should therefore perform signal-integrity and thermal reviews against the manufacturer datasheet and confirm that the selected PCI cards support the intended clock and bus width.
সুপারিশকৃত
Medical and Control Equipment Interfaces
PI7C8150AMAE may be used as a PCI compatibility bridge in controlled equipment that retains older peripheral hardware, provided its electrical and lifecycle requirements are acceptable for the target installation. The verified 2-port configuration and 66 MHz clock support legacy bus segmentation, while the 0°C to 85°C range covers typical controlled environments. Because no verified medical qualification, lifecycle status, or detailed timing information appears in the supplied data, this use does not imply regulatory suitability. Safety, EMC, and system-validation requirements remain the responsibility of the equipment designer.
সুপারিশকৃত
PCI Storage and Network Adapters
The PI7C8150AMAE can bridge PCI-based storage or networking adapters when a platform must preserve legacy expansion compatibility. Its 2-port PCI-to-PCI architecture lets a controller separate host-facing and adapter-facing segments, and the 66 MHz clock supports the established PCI performance class. The bridge itself does not specify storage or network protocols, so adapter functionality must come from the attached devices. Layout planning should preserve bus topology, termination, clock clarity, and power integrity while accommodating all 208 package terminals.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা PI7C8150AMAE — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | PI7C8150AMAE-33 |
|---|---|---|
| Brand | Diodes Incorporated | Diodes Incorporated |
| Package | FQFP-208 (28 mm × 28 mm) | FQFP-208 |
| Device Type | PCI-to-PCI Bridge Interface | IC BRIDGE PCI 2Port 32Bit |
| Number of Ports | 2 ports | 2 ports |
| Maximum Clock Frequency | 66 MHz | 66 MHz |
| Indicative Price | $20.8842 as of 2026-10-30 for the related PI7C8150AMAE-33 listing | $20.8842 as of 2026-10-30 |
| Availability | Listed by DigiKey, Mouser, and Octopart; exact stock quantity not provided | In stock at LCSC in the verified listing |
মূল পার্থক্যসমূহ
- Exact verified target ordering code (বনামPI7C8150AMAE-33)
- Documented package dimensions (বনামPI7C8150AMAE-33)
- Explicit commercial temperature range (বনামPI7C8150AMAE-33)
ডিজাইন নোট
Reserve the full 208-pin FQFP footprint with pin-1 orientation verified against the manufacturer package drawing. Because the supplied excerpts do not provide the complete pin assignment, do not derive BGA, QFP, or lead positions from visually similar devices. Route high-speed PCI signals over a continuous reference plane, minimize stubs, and preserve the required topology around connector and bridge locations before assigning peripheral functions to unused pins.
Design the 3.3 V rail for the bridge based on the current limits and power-consumption data in the manufacturer datasheet, not on the available distributor snippets. Place local high-frequency decoupling directly at the appropriate supply and ground pins, provide adequate bulk capacitance for the complete PCI subsystem, and separate sensitive analog or clock-supply routing where practical. The supplied data does not provide an exact capacitance value, so a capacitor count should not be guessed.
Review PCI clock, reset, arbitration, and transaction-routing requirements against the verified timing tables before PCB release. Keep the 66 MHz clock distribution clean, use the reference-plane geometry recommended by the bridge and system design guidance, and avoid unnecessary test pads or long stubs on critical nets. Because the supplied source excerpts omit setup and hold timing, engineers must obtain the complete manufacturer timing data rather than extrapolate from the maximum clock frequency.
Do not treat PI7C8150AMAE-33 as a drop-in substitute solely because both names share the PI7C8150 family prefix. The verified data confirms a related 2-port, 32-bit bridge ordering code, but it does not provide a complete pin-to-pin comparison, electrical limits, or the meaning of the -33 suffix. Obtain the current ordering guide and datasheets for both devices and compare supply voltage, timing, configuration straps, reset behavior, and all package terminals.
কমপ্লায়েন্স তথ্য
The supplied verified excerpts do not explicitly state compliance for the exact PI7C8150AMAE MPN. A separate cross-reference snippet contains a RoHS-details section, but it does not provide a definitive compliance value for this part.
